👉ከመስከረም 2018 ዓ.ም ጀምሮ ለመንግስት ሰራተኛው ተጨማሪ የደሞዝ ማሻሻያ ለማድረግ መንግስት ወስኖል።

የመንግስት ሠራተኛው ያለውን የኑሮ ውድነት ተቋቁሞ ለመላው የንግዱ ማህበረሰብ ተገቢውን አገልግሎት ሲሰጥ የቆየ የህብረተሰብ ክፍል ነው፡፡

የንግዱ ማህበረሰብ መንግስት ለሚወስዳቸው የሪፎርም እርምጃዎች አጋዥ እየሆነ መቷል።

ይሄው ተግባር አሁንም ተጠናክሮ መቀጠል ይኖርበታል።

ይሁንና እንዳንድ የንግዱ ህብረተሰብ አካላት ከእዚህ ቀደም በተለምዶ የደመወዝ ጭማሪ ተደረገ በሚል በሸቀጦች ዋጋ ላይ እንደሚጨምሩ ይታወቃል፡፡

በሰሞኑ በሚደረገው የደመወዝ ጭማሪ አስታኮ እና ለኑሮ ውድነቱ መቋቋሚያ ተብሎ በተደረገው የደመወዝ ማሻሻያ ዜና በመስማት ህገወጥና ምንም ምክንያት በሌለው መንገድ የዋጋ ጭማሪ በሚያደርጉት ላይ መንግስት ጥብቅ ቁጥጥር የሚያደርግ ይሆናል፡፡

ህገወጥ የዋጋ ጭማሪ አድርገው በሚገኙት ላይ ደግሞ መንግሥት አስተማሪ እርምጃ የሚወስድ መሆኑን በቅድሚያ ያሳውቃል፡፡

በመጨረሻም ሕዝባችንን በንጽሕናና በትጋት በማገልገል፤ ከሚገባንና ከሚጠበቅብን በላይ በመሥራት፤ ሙስናና ብልሹ አሠራርን በመታገል፤ ከዕቅዶቻችን በላይ በማከናወን፤ የኢትዮጵያን ብልጽግና እንደምናረጋግጥ መንግሥት ጽኑ እምነት አለው፡፡

የብልጽግና ጉዟችን በቀጠለ መጠን፣ በየምዕራፉ ሁላችንም የብልጽግናን ትሩፋት መቋደሳችን አይቀሬ ነው፡፡

ለዚያ ደግሞ ሁላችንም ወገባችንን አጥብቀንና ታጥቀን መትጋት አለብን፡፡ ይህ ሲሳካ ነጻነታችንን በደማቸው እንዳጎናጸፉን ቀደምት አባቶቻችን እና እናቶቻችን ሁሉ፣ እኛም ሀገራቸውን ለማበልጸግ ዋጋ የከፈሉ ትውልዶች ተብለን ታሪክ ሲዘክረን ይኖራል።

በማሻሻያውም ዝቅተኛው የመንግሥት ሠራተኛ ደመወዝ ከብር 4 ሺህ 760 ወደ ብር 6 ሺህ እንዲያድግ ይደረጋል ነው ያለው።

ከፍተኛው የመንግሥት ሠራተኛ ደመወዝ ከብር 21 ሺህ 492 ወደ ብር 39 ሺህ እንዲያድግ ይደረጋል ብሏል።

የዲግሪ ተመራቂ መነሻ ደመወዝ ከብር 6 ሺህ 940 ወደ ብር 11 ሺህ 500 የሚሻሻል መሆኑን ገልጿል።

ከሲቪል ሰርቪስ ውጭ በተለያዩ ዘርፎች የተሠማሩ የመንግሥት ሠራተኞች ደመወዝም ማሻሻያ እንደሚደረግበት ታውቋል።

ይህ የደመወዝ ማስተካከያ ከ160 ቢሊዮን ብር በላይ ተጨማሪ በጀት ጠይቋል ፤ ይሄም ለደመወዝ የሚወጣውን ጠቅላላ ዓመታዊ የመንግሥት ወጪ 56ዐ ቢሊዮን ብር ያደርሰዋል።

የፌደራል ሲቪል ሰርቪስ ኮሚሽንን

@etconp

👉Burj Khalifa

💫The Sky-High Engineering Wonder

🚧Check out this video to marvel at Burj Khalifa, the tallest building on Earth, soaring 829.8 meters! It’s a masterpiece of concrete, steel, and bold vision!

🏷How It Stands Tall:
Built with over 330,000 cubic meters of concrete and 55,000 tonnes of steel, its unique Y-shaped design fights wind and heat. A deep foundation anchors it against Dubai’s sandy soil!

🏷Engineering Genius:
The structure uses a clever cooling system to handle desert temperatures, while its elevators zip at 10 meters per second—amazing for 163 floors!

⭐️Burj Khalifa’s foundation piles reach 50 meters deep, deeper than most buildings are tall.

@etconp

👉 INTERCON Construction Chemicals 

● Concrete Admixtures
● Bonding Agents
● Waterproofings
● Wall Putty, Prime Coat
● Concrete Repair Mortar
● Floor hardener, Epoxy
● Grout, Self-level mortar
● Quartz paint, Contextra
● Tile Adhesive & Tile Joint Fillers 
● Geotextiles and other construction chemicals and materials

Tel: 0961955555
Address: Signal, around signal mall

👉QUALITY OF PROJECT MANAGER?

💫A good construction manager is the person who makes sure a building project is completed safely, on time, within budget, and to the required quality standards — while keeping workers, clients, and suppliers all on the same page.

🚧What makes a good one:

1. Strong Planning Skills

Break down the project into clear phases (design, site prep, foundation, structure, finishing).

Create realistic schedules and budgets.
Anticipate problems before they happen.

2. Technical Knowledge

Understand construction methods, materials, and equipment.

Read and interpret drawings, specs, and contracts.

Know local building codes and safety regulations.

3. Leadership & People Skills

Motivate workers and keep morale high.

Resolve conflicts quickly.
Communicate clearly with clients, engineers, architects, and suppliers.

4. Problem-Solving Ability

Find quick solutions to delays, shortages, or design changes.
Make decisions under pressure.

5. Safety-First Mindset
Ensure workers follow safety rules.
Conduct regular site inspections.
Respond immediately to hazards.

6. Quality Control
Check that work meets specifications at every stage.
Prevent costly rework by catching mistakes early.

7. Financial Discipline
Monitor costs daily.
Approve only necessary purchases.
Prevent waste of materials and resources.

⚡️Here is Golden rule!

⭐️A good construction manager doesn’t just “build a building” -they manage the process so the building is built right, safely, and profitably.

@etconp

ታምራት  ፕሌት እና ጄቦልት አቅራቢ

♧ ሁሉን በአንድ ቦታ ለሁሉም ቅርብ

📍ኢትዮጵያ ዉስጥ የትም እንልክሎታለን

♧ ይደውሉልን ያማክሩን

0904040477
0994941708

👉EFFECT OF TEMPRETURE IN CONCRETE CASTING:

💫Temperature has a big influence on concrete casting because it directly affects hydration rate, setting time, workability, and long-term strength.

⭐️A breakdown for both hot and cold conditions are listed below.

🏷1. In Hot Weather (High Temperature)

▶️Effects:Rapid water evaporation → reduces workability and slump.

▶️Faster hydration → shortens setting time, making placing & finishing harder.

▶️Higher risk of plastic shrinkage cracks due to quick surface drying.

▶️Increased risk of cold joints if delays happen during pouring.

▶️Possible reduction in long-term strength if water evaporates before proper hydration.

⚡️Precautions:

⏺Use cool mixing water or chilled aggregates.

⏺Cast during cooler times of the day (early morning/evening).

⏺Cover concrete immediately after finishing to reduce evaporation.

⏺Use retarding admixtures to slow setting.

⏺Keep formwork and reinforcement cool before casting.

🏷2. In Cold Weather (Low Temperature)

▶️Effects:Slower hydration → delays setting and strength gain.

▶️Risk of freezing water inside fresh concrete → disrupts hydration and weakens structure.

▶️Extended curing time required before formwork removal.

▶️Potential scaling or surface damage if concrete freezes before gaining ~3.5 MPa strength.

⚡️Precautions:

⏺Use warm mixing water or heated aggregates.

⏺Use accelerating admixtures to speed up setting.

⏺Cover concrete with thermal blankets or use heated enclosures.

⏺Avoid casting if ambient temperature is below 5 °C without protection.

📜General Rule: Concrete performs best when the fresh concrete temperature is kept between 10 °C and 30 °C during casting and early curing.

@etconp

👉Resident engineer

⏺Is a construction professional who serves as the client's or design engineer's representative on-site, overseeing the project's daily operations and ensuring adherence to plans, specifications, and timelines. 

⏺They act as the primary point of contact between the site and the client or consulting firm, coordinating with contractors, architects, and other stakeholders. 

🏷Key Responsibilities:

⭐️Project Oversight:
Resident engineers supervise construction activities, ensuring work aligns with engineering designs and specifications. 

⭐️Contractor Management:
They issue instructions to the contractor, monitor progress, and address any deviations from the project plan. 

⭐️Quality Control:
They inspect work at various stages, ensuring it meets quality standards and specifications. 

⭐️Communication and Reporting:
They maintain regular communication with the client, design team, and other stakeholders, providing updates and reporting on project status. 

⭐️Documentation:
Resident engineers are responsible for maintaining proper records, including site instructions, inspection reports, and project documentation. 

⭐️Conflict Resolution:
They help resolve conflicts between the contractor and other parties, facilitating smooth project execution. 

⭐️Safety Compliance:
They ensure that the contractor adheres to all safety regulations and procedures. 

💫Basic Skills and Qualifications needed:

⏺Technical Expertise:
A strong understanding of engineering principles, construction methods, and relevant regulations is essential. 

⏺Communication Skills:
Excellent communication and interpersonal skills are needed to effectively interact with various stakeholders. 

⏺Problem-Solving Abilities:
Resident engineers must be able to identify and resolve issues that arise during construction. 

⏺Leadership and Management:
They need to be able to lead and manage the construction team effectively. 

@etconp

👉የአዲስ አበባ ከተማ አስተዳደር ግንባታ ፈቃድና ቁጥጥር ባለስልጣን በአቃቂ ቃሊቲ ክፍለ ከተማ ወረዳ 8፣ ለ30 አባወራዎች የሚሆን ባለ G+4 ወለል ህንጻ ግንባታ ማስጀመሪያ መርሃ ግብር አካሂዷል።

የአዲስ አበባ ከተማ አስተዳደር እያካሄዳቸው ያሉ ሰው ተኮር የልማት ስራዎች አካል የሆነው ይህ መርሃ ግብር፣ የአቅመ ደካሞች የመኖሪያ ቤቶች ግንባታ አንዱ ነው።

ፕሮጀክቱ የአዲስ አበባ ከተማ አስተዳደር ግንባታ ፈቃድና ቁጥጥር ባለስልጣን ከሪልስቴት አልሚዎች ማህበር እና ከኮንስትራክሽን ስራ ተቋራጮች ማህበር ጋር በትብብር የሚያካሄደው ሲሆን፣ በ90 ቀናት አጠናቆ ለነዋሪዎቹ እንደሚተላለፍ የባለስልጣኑ ዋና ዳይሬክተር ኢንጂነር ሕይወት ሳሙኤል ተናግረዋል።

የኮንስትራክሽን ስራ ተቋራጮች ማህበር ፕሬዝዳንት ኢንጂነር የሱፍ መሃመድ እና
የሪልስቴት አልሚዎች ማህበር ምክትል ፕሬዝዳንት ኢንጂነር ጀበል ጀማል፣ከየዘርፋቸው ተልዕኮ ጎን ለጎን ማህበራዊ ኃላፊነታቸውን ለመወጣት እየሰሩ መሆኑን ጠቅሰው፣ የከተማ አስተዳደሩን ሰው ተኮር ፕሮጀክቶች ለማሳካት የራሳቸውን ድርሻ እንደሚወጡና ፕሮጀክቱን በ90 ቀናት አጠናቀው እንደሚያስረክቡ ተናግረዋል።

ምንጭ:-አሚኔ

@etconp

👉62.6 ቢሊየን ብር ውል የተገባለት የሚኤሶ - ድሬዳዋ ፍጥነት መንገድ ግንባታ ፕሮጀክት የጨረታ ሂደቱ ምን ይመስላል?

💫ከዓለም ባንክ ድህረገጽ ላይ ይፋ ከሆነው የአሸናፊ ድርጅት ማሳወቂያ ላይ መረዳት እንደሚቻለው ፕሮጀክቱ በሁለት ሎት ተከፍሎ የተከናወነ ነው።

⏺ሎት 1 ላይ 5 ተጫራቾች የተሳተፉ ሲሆን 4 የቻይና እና አንድ የህንድ ድርጅቶች ናቸው።

🏗አሸናፊው ድርጅት ለዚህ ሎት 31.14  ቢሊየን ብር (172.9 ሚሊየን በዶላር እና 9.3 ቢሊየን በብር) ያቀረበ ሲሆን በሌሎች ተጫራቾች ከቀረቡት  ዋጋዎች መካከል ከፍተኛው 39.1 ቢሊየን  ብር መሆኑን ያሳያል።

🚧ሎት 2 ላይ 4 የቻይና ድርጅት የተሳተፉ ሲሆን አሸናፊው ድርጅት ለዚህ ሎት 31.4 ቢሊየን ብር (174.3 ሚሊየን በዶላር እና 9.4 ቢሊየን በብር) አቅርቧል።

⏺ለዚህ ሎት በሌሎች ተጫራቾች ከቀረበው ዋጋ  ከፍተኛው 38.5 ቢሊየን  ብር መሆኑን ያሳያል።

⏺የፕሮጀክቱ የውል ጊዜ አራት ዓመት ሆኖ ዲዛይንና ግንባታው (Design-Build) በስራ ተቋራጩ የሚከናወን  መሆኑም ተጠቅሷል።

⏺ኮንትራቱ የtolling መሰረተ ልማቶች እና Intelligent Transportation System (ITS) አካቷል።

@etconp

👉 INTERCON Construction Chemicals 

● Concrete Admixtures
● Bonding Agents
● Waterproofings
● Wall Putty, Prime Coat
● Concrete Repair Mortar
● Floor hardener, Epoxy
● Grout, Self-level mortar
● Quartz paint, Contextra
● Tile Adhesive & Tile Joint Fillers 
● Geotextiles and other construction chemicals and materials

Tel: 0961955555
Address: Signal, around signal mall

👉A stair (or staircase) is a series of steps that allows people to move between different levels of a building or structure.

▶️Each stair is made up of steps consisting of a tread (the horizontal part you step on) and a riser (the vertical part between treads).

⏺Stairs are essential in architecture for vertical movement when elevators or ramps aren’t suitable.

🔹 Types of Stairs (Based on Design & Shape):

📌1. Straight Stair

▶️Runs in a straight line without turning.

⏺Simple, common, and easy to build.

📌2. Quarter-Turn (L-shaped) Stair

▶️Has a 90° turn at a landing, changing direction.

⏺Saves space and looks more elegant.

📌3. Half-Turn (U-shaped) Stair

▶️Includes two flights with a 180° turn at a landing.
⏺Compact and often used in multi-storey buildings.

📌4. Spiral Stair

⏺Circular design winding around a central pole.
▶️Space-saving, but narrow and not ideal for heavy use.

📌5. Helical (Curved) Stair

⏺Smooth, curved design (not around a central pole).
▶️Stylish and often seen in luxury buildings.

📌6. Bifurcated Stair

▶️Starts with a wide flight at the bottom, then splits into two narrower flights going in opposite directions.
▶️Common in grand buildings and palaces.

📌7. Circular Stair

⏺Similar to spiral, but with larger radius and no central post.
Easier to use than spiral stairs.

📌8. Dog-Legged Stair

⏺A type of half-turn stair without any gap between flights.
⏺Saves floor space, used in residential/commercial buildings.

📌9. Winder Stair

▶️Turns using triangular steps instead of a landing.
▶️Space-saving but less safe than landings.

📌10. Open-Well Stair

▶️Two flights (like dog-legged) but with a gap/well in between.
Provides light and ventilation through the well.

✅ In summary:

⏺Straight & dog-legged → simple & common.
⏺L-shaped & U-shaped → compact, better aesthetics.
⏺Spiral & helical → decorative, space-saving.
⏺Bifurcated → grand style.

@etconp

👉The design principles of Reinforced Concrete (RC) Slab

💫are based on structural behavior, safety, economy, and serviceability.

▶️A slab is a structural element that mainly resists bending and shear loads and distributes them to the beams, columns, or walls.

📜Here are the key design principles:

🚧1. Structural Behavior Understanding

⏺Slabs are mainly subjected to flexure (bending) and shear.
Loads act perpendicular to the surface of the slab.

❇️Slabs can be:

⏺One-way slab (load transfer in one direction, Lx/Ly ≥ 2).

⏺Two-way slab (load transfer in both directions, Lx/Ly < 2).

▶️Bending moments are resisted by reinforcement placed perpendicular to the span direction.

🚧2. Load Consideration

⏺Dead loads: self-weight of slab, finishes, partitions.
Live loads: occupancy loads (per EBCS).

⏺Environmental loads: wind, earthquake (if applicable).

🚧3. Thickness and Depth Requirements

⏺Slab thickness must prevent excessive deflection and satisfy span/depth ratio.

⏺Minimum thickness (as per IS 456):
Simply supported → L/20
Continuous → L/26
Cantilever → L/7

🚧4. Flexural Strength (Bending Design)

⏺Reinforcement is designed so that tensile stresses are carried by steel.

⏺Concrete resists compression.

⏺Reinforcement must be placed properly in tension zones.
⏺Use limit state method (preferred) ensuring safety against collapse.

🚧5. Shear Strength

⏺Slabs are thin, so generally shear is not critical.
However, punching shear must be checked around columns in flat slabs.
⏺Provide additional reinforcement if shear exceeds permissible limits.

🚧6. Reinforcement Detailing

⏺Main reinforcement: placed in shorter span direction (one-way slab).
⏺Distribution reinforcement: placed perpendicular to main bars to resist shrinkage, temperature stresses, and distribute loads.
⏺Minimum reinforcement:
For HYSD bars → 0.12% of gross cross-sectional area
For mild steel → 0.15% of gross cross-sectional area
⏺Proper spacing, anchorage, cover (usually 20 mm for slabs).

🚧7. Deflection and Crack Control

⏺Satisfy span/depth ratio limits.
⏺Provide shrinkage & temperature reinforcement.
⏺Ensure crack width < permissible limit (usually ≤ 0.3 mm).
⏺Control deflection under service loads.

🚧8. Serviceability and Durability

⏺Adequate cover to reinforcement to protect against corrosion.
⏺Proper concrete grade (minimum C-25 in RCC).
Satisfy fire resistance requirements.

🚧9. Economy and Practicality

⏺Optimize slab thickness and reinforcement to reduce cost.
Standardize bar lengths and spacing for easy construction.
⏺Ensure constructability and avoid congestion of reinforcement.

✅ In short:

🏷The design principles of RC slabs are:

⏺Correct identification of slab type (one-way or two-way).
⏺Proper load assessment.
Adequate thickness for strength & deflection control.
⏺Correct flexural and shear design.
⏺Proper detailing of reinforcement.
⏺Crack, deflection, and durability checks.

@etconp

👉እየተጠናቀቀ ነው‼️

🚧በአማራ ክልል ከአዲስ አበባ-ደብረማርቆስ-ባህርዳር በሚወስደዉ መንገድ በጊደብ ወንዝ ላይ የተሰራዉ ድልድይ ከአስር ቀን በፊት በጎርፍ መወሰዱ ይታወቃል።

⏺አሁን ላይ ድልድዩ እየተሰራ ሲሆን ዛሬ 16/12/2017 ዓም ድልድዩ በዚህ ደረጃ ላይ ይገኛል።

💫ይህ ማለት በመጪዎቹ ቀናት ውስጥ ለአገልግሎት ክፍት ሊሆን እንደሚችል ይጠበቃል።

🚧በድልድዩ መፍረስ ምክንያት በርካታ መኪኖች ቆመዉ ይገኛሉ።

@etconp

👉 በ2017 በጀት ዓመት በመዲናዋ 19 ሺህ ፕሮጀክቶች ተጠናቀው ለአገልግሎት ክፍት ሆነዋል።

▪️ የአዲስ አበባ ከተማ አሥተዳደር ከንቲባ አዳነች አቤቤ በመዲናዋ ተገንብተው የተጠናቀቁ የገበያ ማዕከላትን እና የመኪና ማቆሚያ ፕሮጀክቶችን መርቀዋል።

▪️በ2017 በጀት ዓመት በመዲናዋ 19 ሺህ ፕሮጀክቶች ተጠናቀው ለአገልግሎት ክፍት መሆናቸውን ከንቲባዋ አንስተዋል።

▪️በመዲናዋ የገበያ ማዕከላትን እና የመኪና ማቆሚያ ቦታዎችን በማስፋት የኅብረተሰቡን ሁለንተናዊ ተጠቃሚነት ለማረጋገጥ በመንግሥት በኩል ትኩረት ተሰጥቶ እየተሠራ ነው ብለዋል።

▪️ከሜክሲኮ እስከ ለገሃር 13 የሚሆኑ የመኪና ፓርኪንጎች ተገንብተው ለአገልግሎት ክፍት ሆነዋል ነው ያሉት። በአንድ ጊዜ ብቻ ከ2 ሺህ በላይ ተሽከርካሪዎችን የመያዝ አቅም እንዳላቸውም ገልጸዋል።

⏺በተጨማሪም አስር ተርሚናሎች ለአገልግሎት ክፍት መሆናቸውን ጠቁመዋል። ይህም በአንድ ጊዜ ብቻ  ከ1 ሺህ 600 በላይ ተሽከርካሪዎችን እንደሚይዝ ተናግረዋል።

▪️ከአሁን በፊት በከተማዋ በቂ የተሽከርካሪ ማቆሚያ ቦታዎች ባለመኖራቸው ከፍተኛ የሆነ የትራፊክ መጨናነቅ ችግር እንደነበር ያስታወሱት ከንቲባዋ አሁን ላይ የተገነቡት የመኪና ማቆሚያ ፕሮጀክቶች የትራፊክ ፍሰቱን በማሳለጥ  ከፍተኛ ሚና አላቸው ብለዋል።

▪️በመዲናዋ ተገንብተው ለአገልግሎት ክፍት ከሆኑት የገበያ ማዕከላት መካከል የስኬት እና የአፍሪካ ኅብረት የገበያ ማዕከላት ተጠቃሽ ናቸው። እነዚህ የገበያ ማዕከላት የከተማውን ኢኮኖሚ በማነቃቃት እና የተለያዩ ምርቶችን በበቂ ሁኔታ በማቅረብ እንድሁም የሥራ ዕድልን በመፍጠር ረገድ ሚናቸው የጎላ መሆኑን ነው ከንቲባ አዳነች አቤቤ የገለጹት።

▪️የአካባቢውን ማኅበረሰብ አቅም ባገናዘበ ሁኔታ ምርትን ከማቅረብ በተጨማሪ ምቹ የግብይት ምኅዳር እንዲኖር ከፍተኛ ጠቀሜታ እንዳላቸውም ተናግረዋል።

▪️ለአገልግሎት ክፍት የሆኑት ፕሮጀክቶች የካፍቴሪያ፣ የመዝናኛ፣ የሱቅ አገልግሎት፣ የመፀዳጃ ቤቶች፣ ዘመኑን የዋጁ የደኅንነት ካሜራዎች እና ሌሎች ቴክኖሎጅዎችን ያሟሉ ናቸው።

💫በመዲናዋ የተከናወኑ የልማት ፕሮጀክቶች የኢትዮጵያን መልክ የሚያሳዩ እና ዓለማቀፍ ተወዳዳሪነትን የሚያረጋግጡ ስለመሆናቸውም ተጠቁሟል።

@etconp