๐For Railway Engineer's Job Entrance Exam
Q1. What is Railway Engineering?
Answer: Railway engineering deals with the planning, design, construction, operation, and maintenance of railway tracks and systems.
Q2. What is the standard gauge in Indian Railways?
Answer: 1.676 m
Q3. What is ballast?
Answer: Ballast is a layer of crushed stones laid below sleepers to distribute load and provide drainage.
Q4. Main functions of ballast?
Answer: Load distribution, track stability, drainage, and maintaining track geometry.
Q5. What are sleepers?
Answer: Sleepers are transverse members that support rails and maintain gauge.
Q6. Types of sleepers?
Answer: Wooden, Steel, Cast iron, and Concrete sleepers.
Q7. Best sleeper used in modern railways?
Answer: Pre-stressed concrete sleeper.
Q8. What is rail gauge?
Answer: Distance between the inner faces of two rails.
Q9. Types of rail gauges?
Answer: Broad gauge, Meter gauge, and Narrow gauge.
Q10. What is rail creep?
Answer: Longitudinal movement of rails in the direction of traffic.
@etconp
Q1. What is Railway Engineering?
Answer: Railway engineering deals with the planning, design, construction, operation, and maintenance of railway tracks and systems.
Q2. What is the standard gauge in Indian Railways?
Answer: 1.676 m
Q3. What is ballast?
Answer: Ballast is a layer of crushed stones laid below sleepers to distribute load and provide drainage.
Q4. Main functions of ballast?
Answer: Load distribution, track stability, drainage, and maintaining track geometry.
Q5. What are sleepers?
Answer: Sleepers are transverse members that support rails and maintain gauge.
Q6. Types of sleepers?
Answer: Wooden, Steel, Cast iron, and Concrete sleepers.
Q7. Best sleeper used in modern railways?
Answer: Pre-stressed concrete sleeper.
Q8. What is rail gauge?
Answer: Distance between the inner faces of two rails.
Q9. Types of rail gauges?
Answer: Broad gauge, Meter gauge, and Narrow gauge.
Q10. What is rail creep?
Answer: Longitudinal movement of rails in the direction of traffic.
@etconp
๐14โค3
๐Questions For Material Engineers
1. Why is material testing important in construction?
Ans:To ensure that materials meet design specifications, standards, and safety requirements before and during use.
2. What tests are carried out on cement at site level?
Ans:Fineness test, setting time test, soundness test, and compressive strength test.
3. What is the standard initial and final setting time of OPC cement?
Ans:Initial setting time โฅ 30 minutes
Final setting time โค 600 minutes.
4. How do you check the quality of sand before use?
Ans:Silt content test, bulking test, sieve analysis (gradation), and visual inspection for organic matter.
5. What is the permissible silt content in fine aggregate?
Ans:Not more than 6% by volume.
6. What field tests are conducted on coarse aggregate?
Ans:Sieve analysis, impact value test, crushing value test, abrasion test, and flakiness & elongation index.
7. What is the standard slump range for different concrete works?
Ans:Footings: 25โ75 mm
Beams & slabs: 75โ100 mm
Pumped concrete: 100โ150 mm.
8. How do you conduct a slump test on site?
Ans:Fill cone in 3 layers, each tamped 25 times, lift cone vertically, and measure subsidence.
9. What is cube test in concrete?
Ans:A compressive strength test carried out on 150 mm concrete cubes at 7 and 28 days.
10. What is the minimum acceptable strength at 7 days?
Ans:Generally โฅ 65% of the characteristic 28-day strength.
11. How many concrete cubes are required for each pour?
Ans:Minimum 3 cubes per 30 mยณ of concrete or per dayโs pour, whichever is higher.
@ETCONpWORK @ETCONp
12. What is a field density test and where is it used?
It determines in-situ soil compaction using Sand Cone or Nuclear Density Method for earthworks.
13. What is the required compaction for subgrade and sub-base?
95โ98% of Maximum Dry Density (MDD).
14. What tests are performed on asphalt materials?
Bitumen penetration test, softening point, ductility, Marshall stability, and core density test.
15. What is the Marshall Stability Test?
A test to evaluate the strength, flow, and durability of asphalt mixes.
@etconp
1. Why is material testing important in construction?
Ans:To ensure that materials meet design specifications, standards, and safety requirements before and during use.
2. What tests are carried out on cement at site level?
Ans:Fineness test, setting time test, soundness test, and compressive strength test.
3. What is the standard initial and final setting time of OPC cement?
Ans:Initial setting time โฅ 30 minutes
Final setting time โค 600 minutes.
4. How do you check the quality of sand before use?
Ans:Silt content test, bulking test, sieve analysis (gradation), and visual inspection for organic matter.
5. What is the permissible silt content in fine aggregate?
Ans:Not more than 6% by volume.
6. What field tests are conducted on coarse aggregate?
Ans:Sieve analysis, impact value test, crushing value test, abrasion test, and flakiness & elongation index.
7. What is the standard slump range for different concrete works?
Ans:Footings: 25โ75 mm
Beams & slabs: 75โ100 mm
Pumped concrete: 100โ150 mm.
8. How do you conduct a slump test on site?
Ans:Fill cone in 3 layers, each tamped 25 times, lift cone vertically, and measure subsidence.
9. What is cube test in concrete?
Ans:A compressive strength test carried out on 150 mm concrete cubes at 7 and 28 days.
10. What is the minimum acceptable strength at 7 days?
Ans:Generally โฅ 65% of the characteristic 28-day strength.
11. How many concrete cubes are required for each pour?
Ans:Minimum 3 cubes per 30 mยณ of concrete or per dayโs pour, whichever is higher.
@ETCONpWORK @ETCONp
12. What is a field density test and where is it used?
It determines in-situ soil compaction using Sand Cone or Nuclear Density Method for earthworks.
13. What is the required compaction for subgrade and sub-base?
95โ98% of Maximum Dry Density (MDD).
14. What tests are performed on asphalt materials?
Bitumen penetration test, softening point, ductility, Marshall stability, and core density test.
15. What is the Marshall Stability Test?
A test to evaluate the strength, flow, and durability of asphalt mixes.
@etconp
โค17๐6
๐Caterpillar แจแฐแฐแแ แจแฎแแตแตแซแญแฝแ แแฝแแชแแฝ แ แแซแฝ แตแญแ
แต แ แฐแฝแจแญแซแชแแน แแญ AI Automation แแแ แ แแแแฉแ แ แตแณแแแแข
"Cat AI Assistant" แจแแ แตแซแ แจแฐแฐแ แ แญแ แฒแตแฐแ แจแฐแฐแซแ Jetson Thor แ แฐแฐแ แจNvidia physical AI แ แแซแแแต แแแข
แจแแแ แจAI Hardware แ แแซแฝ แตแญแ แต NVidia แแญ แ แแฐแฃแ แญ แแซแจแแ แแ แ แฃแแต CAT 306 CR Mini แคแญแตแซแซแฐแญ แ แแแ แ แแฅแญแณ แ แฅแ แทแแข
แ Caterpillar แจ Dataแ AI แแญแตแ แแฌแแณแแต แจแแแ Brandon Hootman แฅแแฐแฐแแแจแ CAT AI assistance แจแแฝแ แฆแแฌแฐแฉแ แฅแซแแแฝ แแแแตแฃ แจแฐแ แแแต แแจแแแฝแ แแตแ แตแฃแตแซแแฝแ แแแต แฅแแฒแแ แจแฐแแซแฉ แจแณแญแต แแจแแแฝแ แ แแฐแฅแฐแฅ แ แแต project แแ แซแญแ แจแแแฃแณ แฅแแแฝ แฅแแฐแแซแตแแแแต calculate แแตแจแ แญแฝแแแข
@etconp
"Cat AI Assistant" แจแแ แตแซแ แจแฐแฐแ แ แญแ แฒแตแฐแ แจแฐแฐแซแ Jetson Thor แ แฐแฐแ แจNvidia physical AI แ แแซแแแต แแแข
แจแแแ แจAI Hardware แ แแซแฝ แตแญแ แต NVidia แแญ แ แแฐแฃแ แญ แแซแจแแ แแ แ แฃแแต CAT 306 CR Mini แคแญแตแซแซแฐแญ แ แแแ แ แแฅแญแณ แ แฅแ แทแแข
แ Caterpillar แจ Dataแ AI แแญแตแ แแฌแแณแแต แจแแแ Brandon Hootman แฅแแฐแฐแแแจแ CAT AI assistance แจแแฝแ แฆแแฌแฐแฉแ แฅแซแแแฝ แแแแตแฃ แจแฐแ แแแต แแจแแแฝแ แแตแ แตแฃแตแซแแฝแ แแแต แฅแแฒแแ แจแฐแแซแฉ แจแณแญแต แแจแแแฝแ แ แแฐแฅแฐแฅ แ แแต project แแ แซแญแ แจแแแฃแณ แฅแแแฝ แฅแแฐแแซแตแแแแต calculate แแตแจแ แญแฝแแแข
@etconp
โค12๐4๐2
แณแแซแต แแแต แฅแ แ แฆแแต แ แ
แซแข
โ แจแแแฐแฃแธแ แ แแแแแถแฝ
๐ แแแต any Size & thickness
๐ แ แฆแแต (แฅแญแต แแแฃแตแ แแ แ)
๐ แจแฐแแซแฉ [modefic] แตแซแแฝแ แฅแแฐแซแแแข
โฆ๏ธ แแแแแแ แฅแจแณ แฅแจแต แฅแแแแแแข
โ๏ธแตแแญ 0904040477 แแญแ 0911016833 แฐแแแ แซแแแ
๐ฑแดแแแซแ แแญ แฆhttps://t.me/heavenic1
แ แตแซแปแฆ แ 1.แแญแซแถ
แ.2 แ แจแญ แคแ แชแณแ แแ แจแต
แ.3 แแซ
แฅแซแตแ แณแแแแต แแแซแฝแ แแแข
แณแแซแต แแแต แฅแ แ แฆแแต แ แ แซแข
โ แจแแแฐแฃแธแ แ แแแแแถแฝ
๐ แแแต any Size & thickness
๐ แ แฆแแต (แฅแญแต แแแฃแตแ แแ แ)
๐ แจแฐแแซแฉ [modefic] แตแซแแฝแ แฅแแฐแซแแแข
โฆ๏ธ แแแแแแ แฅแจแณ แฅแจแต แฅแแแแแแข
โ๏ธแตแแญ 0904040477 แแญแ 0911016833 แฐแแแ แซแแแ
๐ฑแดแแแซแ แแญ แฆhttps://t.me/heavenic1
แ แตแซแปแฆ แ 1.แแญแซแถ
แ.2 แ แจแญ แคแ แชแณแ แแ แจแต
แ.3 แแซ
แฅแซแตแ แณแแแแต แแแซแฝแ แแแข
แณแแซแต แแแต แฅแ แ แฆแแต แ แ แซแข
โค2
๐Building Finishes, Services Coordination & Defect Management (Practical & Technical)
1. Why are building finishes important in construction projects?
They protect structural elements, improve durability, functionality, and enhance aesthetics.
2. What checks are required before starting plastering works?
Surface cleaning, alignment check, proper curing of masonry, service concealment completion, and approval.
3. What is the standard thickness of internal and external plaster?
Internal: 12โ15 mm
External: 15โ20 mm (often in two coats).
4. What causes cracks in plaster and how are they controlled?
Shrinkage, poor mix, improper curing, and thermal movement; controlled by proper mix, curing, and mesh at junctions.
5. What is the purpose of expansion or control joints in buildings?
To accommodate movement and prevent random cracking.
6. What checks are required before floor screeding?
Surface cleanliness, level marking, correct slope, service completion, and material approval.
7. What is the recommended screed thickness for building floors?
Typically 40โ50 mm for bonded screed unless otherwise specified.
8. What are the key quality checks for tiling works?
Tile alignment, joint spacing, level, slope to drain, adhesive coverage, and grout quality.
9. What causes tile debonding or hollow sound?
Poor surface preparation, insufficient adhesive, movement, or moisture ingress.
10. What is waterproofing and where is it critical in buildings?
Protection against water penetration; critical in toilets, kitchens, roofs, basements, and balconies.
11. What are common waterproofing systems used in buildings?
Cementitious coating, bituminous membrane, liquid-applied membranes, and PVC membranes.
12. What tests are conducted after waterproofing application?
Flood (ponding) test for 24โ72 hours and visual inspection.
13. What coordination checks are required between civil and MEP works?
Pipe routing, sleeves, conduits, access panels, and service clearances.
14. What is snag list in building projects?
A documented list of defects and incomplete works prepared before handover.
15. What is rectification period?
The time allowed to correct identified defects before final acceptance.
16. What are common finishing defects in buildings?
Uneven plaster, paint peeling, leakage, cracked tiles, and misaligned fixtures.
17. How do you manage defects during finishing stage?
Inspection, documentation, assignment, rectification, and re-inspection.
18. What documents are required for final building handover?
As-built drawings, test reports, warranties, O&M manuals, and completion certificate.
19. What is preventive maintenance in building projects?
Planned inspections and minor repairs to extend service life.
20. What records should be maintained for building finishes and defects?
Inspection reports, snag lists, rectification logs, test results, and handover documents.
@etconp
1. Why are building finishes important in construction projects?
They protect structural elements, improve durability, functionality, and enhance aesthetics.
2. What checks are required before starting plastering works?
Surface cleaning, alignment check, proper curing of masonry, service concealment completion, and approval.
3. What is the standard thickness of internal and external plaster?
Internal: 12โ15 mm
External: 15โ20 mm (often in two coats).
4. What causes cracks in plaster and how are they controlled?
Shrinkage, poor mix, improper curing, and thermal movement; controlled by proper mix, curing, and mesh at junctions.
5. What is the purpose of expansion or control joints in buildings?
To accommodate movement and prevent random cracking.
6. What checks are required before floor screeding?
Surface cleanliness, level marking, correct slope, service completion, and material approval.
7. What is the recommended screed thickness for building floors?
Typically 40โ50 mm for bonded screed unless otherwise specified.
8. What are the key quality checks for tiling works?
Tile alignment, joint spacing, level, slope to drain, adhesive coverage, and grout quality.
9. What causes tile debonding or hollow sound?
Poor surface preparation, insufficient adhesive, movement, or moisture ingress.
10. What is waterproofing and where is it critical in buildings?
Protection against water penetration; critical in toilets, kitchens, roofs, basements, and balconies.
11. What are common waterproofing systems used in buildings?
Cementitious coating, bituminous membrane, liquid-applied membranes, and PVC membranes.
12. What tests are conducted after waterproofing application?
Flood (ponding) test for 24โ72 hours and visual inspection.
13. What coordination checks are required between civil and MEP works?
Pipe routing, sleeves, conduits, access panels, and service clearances.
14. What is snag list in building projects?
A documented list of defects and incomplete works prepared before handover.
15. What is rectification period?
The time allowed to correct identified defects before final acceptance.
16. What are common finishing defects in buildings?
Uneven plaster, paint peeling, leakage, cracked tiles, and misaligned fixtures.
17. How do you manage defects during finishing stage?
Inspection, documentation, assignment, rectification, and re-inspection.
18. What documents are required for final building handover?
As-built drawings, test reports, warranties, O&M manuals, and completion certificate.
19. What is preventive maintenance in building projects?
Planned inspections and minor repairs to extend service life.
20. What records should be maintained for building finishes and defects?
Inspection reports, snag lists, rectification logs, test results, and handover documents.
@etconp
โค18๐4๐1
๐แ แ
แแญ แแแตแตแญ แแขแญ แ แแแต (แถ/แญ) แจแขแพแแฑ แแแ แ แแ แ แแฎแแแ แแจแแซ แแแฃแณแ แแฌ แฅแญ 2 แแ 2018 แ.แ แ แญแ แตแซ แ แตแแแฉแข
๐งแตแ แขแพแแฑ แ แแแ แแ แ แแฎแแแ แแจแแซ แแแฃแณ แแ แซแ แ แซแแแ?
๐ซแจแแแแชแซแ แแแซแ แจแ แแฎแแแ แแจแแซ แฅแซ แ แ แแต 60 แแแฎแ แฐแแฆแฝแ แจแแตแฐแแแต แ แ แ แ แแ
๐ซแจแ แฒแต แ แ แฃ แฐแกแฅ แแตแซแ 40 แชแแแตแญ แ แซแฃแข แ แแตแแแแ 1910 แแตแญ แจแแณ แฃแแต แขแพแแฑ แจแฐแ แญแแแฃแ
๐ซแแแฃแณแ แฒแ แแแ แ แแชแซแ แจแ แแ แแณแ แจแ แจแญ แตแซแแตแแญแต แแแปแชแซแแฝ แ แแท แซแฐแญแแณแ
๐ซแแแชแฑ แ แ แแต 110 แแแฎแ แแแแฐแแฝแ แจแแตแฐแแแต แ แ แ แแญ แฅแแตแตแฐแญแต แซแฐแญแแ
๐ซแขแพแแฑ แแ แแฎแแแแฝ แฅแซ แจแฐแแธ แจแฃแข แ แแต
๐ซแแณแจแปแธแแ แขแตแฎแตแซ แแฐแจแแ แแ แแตแซแแแต แแแแฐแแฝ แฅแ แแแณ แซแแต แจแฐแ แแต
๐ซแ แ แแชแซ แณแชแญ แตแแ แจแ แจแญ แตแซแแตแแญแต แแ แจแฐ แแแต แแฎแแญแต แญแแแ
๐ซแจแแฃแฉ แจแ แจแญ แตแซแแตแแญแต แแ แณแญ แแญ แ แแแ แจแฐแแแฐ แ แ แซแญ แฅแแฒแแญ แแน แแแณ แญแแฅแซแ
๐ซแฆแ แ แแแ แแ แ แแฎแแแ แแจแแซ แแฐ 25 แแแฎแ แจแแ แ แแแแฐแแฝแ แ แ แแต แจแแตแฐแแแต แ แ แ แ แแ
๐ซแขแตแฎแตแซแ แจแแฐแแท แจแ แแชแซ แแแฃแญ แแฐแ แจแ แจแญ แตแซแแตแแญแต แ แญ แจแแตแจแ แ แแแ แซแแแ แแ
๐ซแจแขแตแฎแตแซ แแแซแ แจแขแฎแแ แชแแญแแฃ แจแขแแฐแตแตแช แแตแแแซ แ แแแณ แฅแ แจแจแ แ แแแ แจแ แชแจแฝแ แตแตแซแดแ แแญ แจแฐแแ แ แแ
๐ซแแฎแแญแฑ แจแขแตแฎแตแซ แ แจแญ แแแแตแ แ แแแ แแ แฐแแณแณแชแแต แซแ แแญแซแ
๐ซแ AfCFTA แแ แแ แจแ แแชแซแ แจแแแแแต แ แ แ แญแจแแซแ
๐ซแจแแแต แฅแ แฑแชแแ แฎแชแฐแฎแฝแ แซแฐแแ
๐ซแขแตแฎแตแซแแ แแณแ แจแ แญแ แ แ แแญ แแแจแ แซแฐแญแแณแแข
@etconp
๐งแตแ แขแพแแฑ แ แแแ แแ แ แแฎแแแ แแจแแซ แแแฃแณ แแ แซแ แ แซแแแ?
๐ซแจแแแแชแซแ แแแซแ แจแ แแฎแแแ แแจแแซ แฅแซ แ แ แแต 60 แแแฎแ แฐแแฆแฝแ แจแแตแฐแแแต แ แ แ แ แแ
๐ซแจแ แฒแต แ แ แฃ แฐแกแฅ แแตแซแ 40 แชแแแตแญ แ แซแฃแข แ แแตแแแแ 1910 แแตแญ แจแแณ แฃแแต แขแพแแฑ แจแฐแ แญแแแฃแ
๐ซแแแฃแณแ แฒแ แแแ แ แแชแซแ แจแ แแ แแณแ แจแ แจแญ แตแซแแตแแญแต แแแปแชแซแแฝ แ แแท แซแฐแญแแณแ
๐ซแแแชแฑ แ แ แแต 110 แแแฎแ แแแแฐแแฝแ แจแแตแฐแแแต แ แ แ แแญ แฅแแตแตแฐแญแต แซแฐแญแแ
๐ซแขแพแแฑ แแ แแฎแแแแฝ แฅแซ แจแฐแแธ แจแฃแข แ แแต
๐ซแแณแจแปแธแแ แขแตแฎแตแซ แแฐแจแแ แแ แแตแซแแแต แแแแฐแแฝ แฅแ แแแณ แซแแต แจแฐแ แแต
๐ซแ แ แแชแซ แณแชแญ แตแแ แจแ แจแญ แตแซแแตแแญแต แแ แจแฐ แแแต แแฎแแญแต แญแแแ
๐ซแจแแฃแฉ แจแ แจแญ แตแซแแตแแญแต แแ แณแญ แแญ แ แแแ แจแฐแแแฐ แ แ แซแญ แฅแแฒแแญ แแน แแแณ แญแแฅแซแ
๐ซแฆแ แ แแแ แแ แ แแฎแแแ แแจแแซ แแฐ 25 แแแฎแ แจแแ แ แแแแฐแแฝแ แ แ แแต แจแแตแฐแแแต แ แ แ แ แแ
๐ซแขแตแฎแตแซแ แจแแฐแแท แจแ แแชแซ แแแฃแญ แแฐแ แจแ แจแญ แตแซแแตแแญแต แ แญ แจแแตแจแ แ แแแ แซแแแ แแ
๐ซแจแขแตแฎแตแซ แแแซแ แจแขแฎแแ แชแแญแแฃ แจแขแแฐแตแตแช แแตแแแซ แ แแแณ แฅแ แจแจแ แ แแแ แจแ แชแจแฝแ แตแตแซแดแ แแญ แจแฐแแ แ แแ
๐ซแแฎแแญแฑ แจแขแตแฎแตแซ แ แจแญ แแแแตแ แ แแแ แแ แฐแแณแณแชแแต แซแ แแญแซแ
๐ซแ AfCFTA แแ แแ แจแ แแชแซแ แจแแแแแต แ แ แ แญแจแแซแ
๐ซแจแแแต แฅแ แฑแชแแ แฎแชแฐแฎแฝแ แซแฐแแ
๐ซแขแตแฎแตแซแแ แแณแ แจแ แญแ แ แ แแญ แแแจแ แซแฐแญแแณแแข
@etconp
โค10๐6
๐4 แคแญแตแซแซแฐแญ แชแซแญ แฅแแแแแแ
๐แฃแถแณ แ แแญแ แแแฎ
๐แแ แแ แแจแ แ 0912261146 แญแฐแแ๐
@etconp
๐แฃแถแณ แ แแญแ แแแฎ
๐แแ แแ แแจแ แ 0912261146 แญแฐแแ๐
@etconp
โค4๐1
Media is too big
VIEW IN TELEGRAM
๐แแแฃแณแ แจแฐแแแจแ แจแขแพแแฑ แแแ แ แแ แ แแฎแแแ แแจแแซ แฒแ แแแ
แญแ
แ แญแแตแแโค
#ethiopianairlines #NewAirport
@etconp
#ethiopianairlines #NewAirport
@etconp
โค16๐ฅ1
3120. In the analysis of Trusses, the Method of Sections is preferable over the Method of
Joints when:
Joints when:
Anonymous Quiz
33%
(a) all forces are zero
25%
(b) only a few specific member forces are needed
14%
(c) the structure is unstable
28%
(d) all member forces are required
๐4๐1
3119. Which of the following is NOT a factor used in determining the design strength of a compression member in accordance with limit state design method?
Anonymous Quiz
32%
(a) The materialโs ultimate strength
25%
(b) The effective length factor
29%
(c) The moment of inertia
15%
(d) The cross-sectional area
๐ฅ5๐2โค1
3118. Batten plates are usually used in which type of column sections?
Anonymous Quiz
9%
(a) Mid height of a circular columns
22%
(b) A single rectangular tubular section
57%
(c) Built-up columns with two or more rolled steel sections placed side by side
12%
(d) Single hollow sections
๐5
3117. Which of the following type of tension member is not mainly used in modern practice?
Anonymous Quiz
20%
(a) Single angles
40%
(b) Flat bars
17%
(c) Double angles
23%
(d) Circular section
๐3
Introduction to Construction Scheduling with Ms Project 2016 - Building Amaster schedule.
https://youtu.be/JbPplB8jNHw
แจMs Project 2016 แจแตแแ แ แชแตแฎ Part l แ YouTube แแแฝแ แฐแแแแข
#MsProject2016 #Constructionscheduling
https://youtu.be/JbPplB8jNHw
แจMs Project 2016 แจแตแแ แ แชแตแฎ Part l แ YouTube แแแฝแ แฐแแแแข
#MsProject2016 #Constructionscheduling
โค5๐ฅ2๐1
3116. The strength of tensile members is not influenced by:
Anonymous Quiz
15%
(a) Length of connection
22%
(b) Net area of cross section
31%
(c) Type of fabrication
32%
(d) Length of plate
โค3๐3
3115. Effective length of fillet weld is
Anonymous Quiz
23%
(a) Equal to overall length plus twice the weld size
22%
(b) Twice the overall length plus twice the weld size
40%
(c) Equal to overall length minus twice the weld size
14%
(d) Twice the overall length minus twice the weld size
๐ฅฐ4โค2
3112. A _____ curve consist of a single arc of circle having uniform radius.
Anonymous Quiz
63%
(a) Simple circular
14%
(b) Compound
11%
(c) Combined
13%
(d) Transition
โค4๐2
3111. Which of the following are vertical curves?
Anonymous Quiz
36%
(a) Sag curve
13%
(b) Summit curve
45%
(c) Both (a) and (b)
5%
(d) None of above
โค7
#ADVERTISEMENT
๐ ยฒโฐยฒโต Hyundai Robex R340L SMART
Hyundai Robex R340L SMART is a large crawler excavator designed for heavy-duty earthmoving and mining applications. It is powered by a Hyundai D6AC-C1 engine and features an operating weight of 33,800 kg. ๐ READ MORE
๐๐๐๐๐๐๐
With Out any Additional Collateral
๐ฆBank Loan ๐ฅฐ๐๐ฅฐ
Interest rate: 21%
Loan repayment period: 5 years
Total Price: 43,800,000 ETB
CASH: 13,140,000 ETB
BANK: 30,660,000 ETB
๐ +251992229292
@Ab_Carsโ
https://t.me/AbrahamDealer
๐ ยฒโฐยฒโต Hyundai Robex R340L SMART
Hyundai Robex R340L SMART is a large crawler excavator designed for heavy-duty earthmoving and mining applications. It is powered by a Hyundai D6AC-C1 engine and features an operating weight of 33,800 kg. ๐ READ MORE
๐๐๐๐๐๐๐
With Out any Additional Collateral
๐ฆBank Loan ๐ฅฐ๐๐ฅฐ
Interest rate: 21%
Loan repayment period: 5 years
Total Price: 43,800,000 ETB
CASH: 13,140,000 ETB
BANK: 30,660,000 ETB
๐ +251992229292
@Ab_Carsโ
https://t.me/AbrahamDealer
โค6๐ฅ3