👉የዳንጎቴ ሲሚንቶ ግዙፍ ማስፋፊያ ለኢትዮጵያ እድል ይዞ መጥቷል
💫የዳንጎቴ ሲሚንቶ ኩባንያ በቀጣዮቹ አራት ዓመታት ውስጥ የምርት አቅሙን በ45 በመቶ ለማሳደግ የሚያስችለውን የ1 ቢሊዮን ዶላር ግዙፍ የኢንቨስትመንት ዕቅድ ይፋ አድርጓል።
ይህ የማስፋፊያ ፕሮጀክት ኢትዮጵያን፣ ናይጄሪያን እና ሌሎች የአፍሪካ ሀገራትን የኢኮኖሚ ተጠቃሚ እንደሚያደርግ ተመላክቷል።
የስትራቴጂካዊ ስምምነቱ ዝርዝር
ኩባንያው ይህንን መጠነ-ሰፊ የማስፋፊያ ሥራ ለማከናወን ከቻይናው ሲኖማ (Sinoma) ኩባንያ ጋር የግንባታ ስምምነት ተፈራርሟል። የዚህ ስምምነት ዋና ዓላማዎች፦
* የምርት አቅም፦ አሁን ያለውን አጠቃላይ የምርት አቅም ወደ 80 ሚሊዮን ቶን ከፍ ማድረግ።
* የኤክስፖርት ዕድገት፦ በ2025 የነበረውን 1.4 ሚሊዮን ቶን የሲሚንቶና የክሊንከር ኤክስፖርት በ2030 ወደ 10 ሚሊዮን ቶን ማድረስ።
አስደናቂ የትርፍ እና የገቢ ዕድገት
ቢዝነስ ኢንሳይደር አፍሪካ እንደዘገበው፣ የኩባንያው ጠቅላላ ገቢ የ20.3 በመቶ ዕድገት አሳይቷል።
ኩባንያው በ2025 የነበረውን የትርፍ መጠን በሁለት እጥፍ በማሳደግ፣ 1 ትሪሊዮን ናይራ የተጣራ ትርፍ ማስመዝገብ መቻሉን አስታውቋል።
ይህ ኢንቨስትመንት በኢትዮጵያ ያለውን የሲሚንቶ አቅርቦት ፍላጎት ከመሙላት ባለፈ፣ ለግንባታው ዘርፍ መነቃቃትና ለውጭ ምንዛሬ ግኝት ከፍተኛ አስተዋጽኦ ይኖረዋል ተብሎ ይጠበቃል።
Via Getu Temesgen
@etconp
💫የዳንጎቴ ሲሚንቶ ኩባንያ በቀጣዮቹ አራት ዓመታት ውስጥ የምርት አቅሙን በ45 በመቶ ለማሳደግ የሚያስችለውን የ1 ቢሊዮን ዶላር ግዙፍ የኢንቨስትመንት ዕቅድ ይፋ አድርጓል።
ይህ የማስፋፊያ ፕሮጀክት ኢትዮጵያን፣ ናይጄሪያን እና ሌሎች የአፍሪካ ሀገራትን የኢኮኖሚ ተጠቃሚ እንደሚያደርግ ተመላክቷል።
የስትራቴጂካዊ ስምምነቱ ዝርዝር
ኩባንያው ይህንን መጠነ-ሰፊ የማስፋፊያ ሥራ ለማከናወን ከቻይናው ሲኖማ (Sinoma) ኩባንያ ጋር የግንባታ ስምምነት ተፈራርሟል። የዚህ ስምምነት ዋና ዓላማዎች፦
* የምርት አቅም፦ አሁን ያለውን አጠቃላይ የምርት አቅም ወደ 80 ሚሊዮን ቶን ከፍ ማድረግ።
* የኤክስፖርት ዕድገት፦ በ2025 የነበረውን 1.4 ሚሊዮን ቶን የሲሚንቶና የክሊንከር ኤክስፖርት በ2030 ወደ 10 ሚሊዮን ቶን ማድረስ።
አስደናቂ የትርፍ እና የገቢ ዕድገት
ቢዝነስ ኢንሳይደር አፍሪካ እንደዘገበው፣ የኩባንያው ጠቅላላ ገቢ የ20.3 በመቶ ዕድገት አሳይቷል።
ኩባንያው በ2025 የነበረውን የትርፍ መጠን በሁለት እጥፍ በማሳደግ፣ 1 ትሪሊዮን ናይራ የተጣራ ትርፍ ማስመዝገብ መቻሉን አስታውቋል።
ይህ ኢንቨስትመንት በኢትዮጵያ ያለውን የሲሚንቶ አቅርቦት ፍላጎት ከመሙላት ባለፈ፣ ለግንባታው ዘርፍ መነቃቃትና ለውጭ ምንዛሬ ግኝት ከፍተኛ አስተዋጽኦ ይኖረዋል ተብሎ ይጠበቃል።
Via Getu Temesgen
@etconp
❤7👍3👏1🎉1
👉Here’s a clear, point‑form breakdown of the vest colors and their meanings from your guide:
🔹 Regulated Vest Colors
- Yellow → Construction, traffic, high‑visibility environments
- Orange → Construction, railroads, heavy machinery
- Red → Emergency services, rescue, high‑visibility
🔸 Not Regulated Vest Colors
- Blue → Visitors, technicians, supervisors
- Green → Healthcare staff, paramedics, first aid responders
- White → Supervisors
- Black → Security, private events
- Brown → Cleaning, maintenance
- Gray → Maintenance, low‑risk roles
🚧On construction sites, safety vests are not just for visibility — their colors often indicate different roles and responsibilities.
Understanding these colors helps improve coordination, safety, and communication on site.
🔶 Yellow Vest – Commonly used in construction, traffic control, and high-visibility environments.
🟧 Orange Vest – Used around heavy machinery, railways, and construction zones.
🔴 Red Vest – Typically worn by emergency responders and rescue teams.
🔵 Blue Vest – Often used for visitors, technicians, or supervisors.
🟢 Green Vest – Used by safety staff, health officers, or first-aid responders.
⚪ White Vest – Usually worn by supervisors or site managers.
⚫ Black Vest – Used in security or private event management.
🟤 Brown Vest – Common for cleaning or maintenance staff.
⚙️ Gray Vest – Used for maintenance and low-risk tasks.
Knowing the meaning of vest colors helps maintain proper site organization and safety awareness.
Always follow site safety guidelines and PPE standards.
#ConstructionSafety #SafetyVest #PPE #CivilEngineering #ConstructionSite #WorkplaceSafety #EngineeringLife #SafetyFirst #ConstructionWorkers #SiteSafety #CivilEngineeringLife #EngineeringKnowledge #ConstructionTips #SafetyAwareness
@etconp
🔹 Regulated Vest Colors
- Yellow → Construction, traffic, high‑visibility environments
- Orange → Construction, railroads, heavy machinery
- Red → Emergency services, rescue, high‑visibility
🔸 Not Regulated Vest Colors
- Blue → Visitors, technicians, supervisors
- Green → Healthcare staff, paramedics, first aid responders
- White → Supervisors
- Black → Security, private events
- Brown → Cleaning, maintenance
- Gray → Maintenance, low‑risk roles
🚧On construction sites, safety vests are not just for visibility — their colors often indicate different roles and responsibilities.
Understanding these colors helps improve coordination, safety, and communication on site.
🔶 Yellow Vest – Commonly used in construction, traffic control, and high-visibility environments.
🟧 Orange Vest – Used around heavy machinery, railways, and construction zones.
🔴 Red Vest – Typically worn by emergency responders and rescue teams.
🔵 Blue Vest – Often used for visitors, technicians, or supervisors.
🟢 Green Vest – Used by safety staff, health officers, or first-aid responders.
⚪ White Vest – Usually worn by supervisors or site managers.
⚫ Black Vest – Used in security or private event management.
🟤 Brown Vest – Common for cleaning or maintenance staff.
⚙️ Gray Vest – Used for maintenance and low-risk tasks.
Knowing the meaning of vest colors helps maintain proper site organization and safety awareness.
Always follow site safety guidelines and PPE standards.
#ConstructionSafety #SafetyVest #PPE #CivilEngineering #ConstructionSite #WorkplaceSafety #EngineeringLife #SafetyFirst #ConstructionWorkers #SiteSafety #CivilEngineeringLife #EngineeringKnowledge #ConstructionTips #SafetyAwareness
@etconp
❤8👏3
This media is not supported in your browser
VIEW IN TELEGRAM
🚧This Is How Engineers Stop Bridges From Rotating Under Eccentric Loads
https://t.me/ETCONpWORK
@etconp
https://t.me/ETCONpWORK
@etconp
❤5
#ADVERTISEMENT
🏗️ ጥራት ያላቸዉ ፌሮዎች
♦️በተመጣጣኝ ዋጋ ማግኘት ይፈልጋሉ? ከኛ ይዘዙ❗️
🚧አኑፍዋ ትሬዲንግ ኃ/የተ/የግል ድርጅት
| ፈጣን አቅርቦት | ታማኝ አገልግሎት!
🏷Contact us
📞+251931639484
📍Address:Addis Ababa
🏗️ ጥራት ያላቸዉ ፌሮዎች
♦️በተመጣጣኝ ዋጋ ማግኘት ይፈልጋሉ? ከኛ ይዘዙ❗️
🚧አኑፍዋ ትሬዲንግ ኃ/የተ/የግል ድርጅት
| ፈጣን አቅርቦት | ታማኝ አገልግሎት!
🏷Contact us
📞+251931639484
📍Address:Addis Ababa
❤1👌1
👉Types of Flexible Road Pavement
🚧These refer to the overall pavement structure or layers used in road construction (subgrade, base, binder, and surface layers).
💫1. Conventional Flexible Pavement:
⏺A pavement made of several layers (subgrade, sub-base, base, and asphalt surface) that distributes traffic load gradually to the soil.
💫2. Full-Depth Asphalt Pavement:
⏺A pavement where all structural layers above the subgrade are made entirely of asphalt.
💫3. Contained Rock Asphalt Mat (CRAM):
⏺A type of pavement where asphalt mix is placed within crushed rock to improve strength and load distribution.
💫4. Bituminous Surface Treatment:
⏺A thin layer of bitumen and aggregates applied on the surface, mainly used for low-traffic roads or maintenance.
@etconp
🚧These refer to the overall pavement structure or layers used in road construction (subgrade, base, binder, and surface layers).
💫1. Conventional Flexible Pavement:
⏺A pavement made of several layers (subgrade, sub-base, base, and asphalt surface) that distributes traffic load gradually to the soil.
💫2. Full-Depth Asphalt Pavement:
⏺A pavement where all structural layers above the subgrade are made entirely of asphalt.
💫3. Contained Rock Asphalt Mat (CRAM):
⏺A type of pavement where asphalt mix is placed within crushed rock to improve strength and load distribution.
💫4. Bituminous Surface Treatment:
⏺A thin layer of bitumen and aggregates applied on the surface, mainly used for low-traffic roads or maintenance.
@etconp
❤7
👉 INTERCON Construction Chemicals
● Concrete Admixtures
● Bonding Agents
● Waterproofings
● Wall Putty, Prime Coat
● Concrete Repair Mortar
● Floor hardener, Epoxy
● Grout, Self-level mortar
● Quartz paint, Contextra
● Tile Adhesive & Tile Joint Fillers
● Geotextiles and other construction chemicals and materials
☎️ Tel: 0961955555
🔹 Address 1: Signal road, around
Dinberwa Hospital
🔹 Addres 2: Wellosefer, Infront of
Dani Plaza
● Concrete Admixtures
● Bonding Agents
● Waterproofings
● Wall Putty, Prime Coat
● Concrete Repair Mortar
● Floor hardener, Epoxy
● Grout, Self-level mortar
● Quartz paint, Contextra
● Tile Adhesive & Tile Joint Fillers
● Geotextiles and other construction chemicals and materials
☎️ Tel: 0961955555
🔹 Address 1: Signal road, around
Dinberwa Hospital
🔹 Addres 2: Wellosefer, Infront of
Dani Plaza
🚿 Low Shower Pressure? The Secret Is Air!
📌Many people think weak shower flow means low water supply, but often the real problem is trapped air in the pipeline or poor pipe layout.
🔴 Option A – Direct Pipe: Trapped air creates vacuum pockets that interrupt water flow, causing weak pressure.
🟢 Option B – Air Jar (Best Solution): Adding a vertical air vent allows trapped air to escape, letting gravity maintain smooth and strong water flow.
🔴 Option C – Too Many Bends: Multiple pipe bends increase friction loss, reducing both speed and pressure of water.
💡 Engineering Tip:
Good plumbing design reduces air pockets and pipe friction to maintain efficient water pressure.
@etconp
📌Many people think weak shower flow means low water supply, but often the real problem is trapped air in the pipeline or poor pipe layout.
🔴 Option A – Direct Pipe: Trapped air creates vacuum pockets that interrupt water flow, causing weak pressure.
🟢 Option B – Air Jar (Best Solution): Adding a vertical air vent allows trapped air to escape, letting gravity maintain smooth and strong water flow.
🔴 Option C – Too Many Bends: Multiple pipe bends increase friction loss, reducing both speed and pressure of water.
💡 Engineering Tip:
Good plumbing design reduces air pockets and pipe friction to maintain efficient water pressure.
@etconp
❤7👍2
👉Slump Test
💫The slump test is a standard method used to determine the workability and consistency of fresh concrete by measuring the vertical settlement after removing the slump cone.
🏷Types of Slump:
1️⃣ Zero Slump:
⏺A slump condition where the concrete shows no measurable settlement after the cone is lifted.
📜Meaning:
📍Very stiff mix
📍Very low workability
📍Requires mechanical vibration
2️⃣ True Slump:
⏺A slump condition where the concrete settles uniformly downward while maintaining its general shape.
📜Meaning:
📍Good cohesion
📍Proper workability
📍Most acceptable result in structural concrete
3️⃣ Shear Slump:
⏺A slump condition where one side of the concrete mass slips or shears off.
📜Meaning:
📍Poor cohesion
📍Possible segregation
📍Test should be repeated
4️⃣ Collapse Slump:
⏺A slump condition where the concrete completely collapses and spreads out after lifting the cone.
📜Meaning:
📍Very high workability
📍Excess water
📍Not suitable for normal structural concrete unless specially designed
🎲For Site Summary:
1. Zero slump → Too stiff
2. True slump → Correct
3. Shear Slump → Unstable
4. Collapse slump → Too wet
🔰On site, we always aim for a true slump unless the design specifies otherwise.
@etconp
💫The slump test is a standard method used to determine the workability and consistency of fresh concrete by measuring the vertical settlement after removing the slump cone.
🏷Types of Slump:
1️⃣ Zero Slump:
⏺A slump condition where the concrete shows no measurable settlement after the cone is lifted.
📜Meaning:
📍Very stiff mix
📍Very low workability
📍Requires mechanical vibration
2️⃣ True Slump:
⏺A slump condition where the concrete settles uniformly downward while maintaining its general shape.
📜Meaning:
📍Good cohesion
📍Proper workability
📍Most acceptable result in structural concrete
3️⃣ Shear Slump:
⏺A slump condition where one side of the concrete mass slips or shears off.
📜Meaning:
📍Poor cohesion
📍Possible segregation
📍Test should be repeated
4️⃣ Collapse Slump:
⏺A slump condition where the concrete completely collapses and spreads out after lifting the cone.
📜Meaning:
📍Very high workability
📍Excess water
📍Not suitable for normal structural concrete unless specially designed
🎲For Site Summary:
1. Zero slump → Too stiff
2. True slump → Correct
3. Shear Slump → Unstable
4. Collapse slump → Too wet
🔰On site, we always aim for a true slump unless the design specifies otherwise.
@etconp
👍9❤6👏1
#ADVERTISEMENT
🏗️ ጥራት ያላቸዉ ፌሮዎች
♦️በተመጣጣኝ ዋጋ ማግኘት ይፈልጋሉ? ከኛ ይዘዙ❗️
🚧አኑፍዋ ትሬዲንግ ኃ/የተ/የግል ድርጅት
| ፈጣን አቅርቦት | ታማኝ አገልግሎት!
🏷Contact us
📞+251931639484
📍Address:Addis Ababa
🏗️ ጥራት ያላቸዉ ፌሮዎች
♦️በተመጣጣኝ ዋጋ ማግኘት ይፈልጋሉ? ከኛ ይዘዙ❗️
🚧አኑፍዋ ትሬዲንግ ኃ/የተ/የግል ድርጅት
| ፈጣን አቅርቦት | ታማኝ አገልግሎት!
🏷Contact us
📞+251931639484
📍Address:Addis Ababa
❤3🎉1
👉Various types of load acting on column
🚧1. self weight of column (dead load) - volume of concrete + weight of steel
🚧2. self of weight of beam per meter running length for instance there are two beams with dimension of Beam 1:-
Given D= 30cm W= 20cm length = 4m
Beam 2:- D= 30cm W= 20cm length = 5m which beam do you the dead load is greater ?
Obviously:-Beam 2 because it’s spam is greater volume of beam = W x L x d (concrete)
+ rebar weight .... if it’s RC beam
🚧3. Weight of slab per square meter (if it’s flat slab it directly acts on the column but if it’s with a beam with a flange the load comes from slab to beam from beam to column from column to foundation)
@etconp
🚧1. self weight of column (dead load) - volume of concrete + weight of steel
🚧2. self of weight of beam per meter running length for instance there are two beams with dimension of Beam 1:-
Given D= 30cm W= 20cm length = 4m
Beam 2:- D= 30cm W= 20cm length = 5m which beam do you the dead load is greater ?
Obviously:-Beam 2 because it’s spam is greater volume of beam = W x L x d (concrete)
+ rebar weight .... if it’s RC beam
🚧3. Weight of slab per square meter (if it’s flat slab it directly acts on the column but if it’s with a beam with a flange the load comes from slab to beam from beam to column from column to foundation)
@etconp
❤5👍1
👉Always remember to put on your PPE anytime you are on site.
🚧it Is for your protection.
🏷Nobody teaches doctors to put on their lab coat.
🔰Be professional to attract professional treatment.
@etconp
🚧it Is for your protection.
🏷Nobody teaches doctors to put on their lab coat.
🔰Be professional to attract professional treatment.
@etconp
❤9
Ethio Construction Engineering
👉Suppose the length, breadth and thickness of asphalt layer are 150meters , 10meters and 15cm respectively 💫Assume the asphalt is 2400kg/m³ And one dumper carries 40 tones 📩 @COTMp @etconp
⭐️Answer
- Volume of asphalt = L x W x T
- volume of asphalt = 150m x 10m x 0.15m
- volume of asphalt = 225m³
For full answer check it on the image
መልስ
በመጀመሪያ ለ አስፋልቱ ንጣፍ ምን ያህል አስፋልት
(በ ቮሊዩም) እንደሚያስፈልገን እናስላ
ቮሊዩም = ርዝመት x ስፋት x ጥልቀት (ውፍረት)
ቮሊዩም = 150 ሜትር x 10 ሜትር x 0.15 ሜትር (15ሳንቲም)
ቮሊዩም = 225 ሜትሪክ ኪዩብ
ለ አስፋልት ንጣፍ የሚያስፈልገን 225 ሜትሪክ ኪዩብ ነው
ነገር ግን የተነገረን የ መኪናው የመጫኛ አቅም ነው በ volumetric ሳይሆን በ gravimetric (በክብደት ነው) ነው ስለዚህ የሚያስፈልገንን የ አስፋልት መጠን በ ኪሎ ግራም እናስላ ከዛም ወደ ቶን እንቀይር
የ አስፉልቱ በ አንድ ሜትር ኪዩብ 2400 ኪሎግራም ይመዝናል/ተጠቅጥቋል ስለዚህ በ ኪሎግራም ለማግኘት ዴንሲቲ/density ሲባዛ በ ቮሊዩም እናረጋለን
ክብደት (በኪሎ) = ቮሊዩም x ዴንሲቲ/
density
ክብደት = 2400ኪሎግራም በ ሜትር
ኪዩብ x 225 ሜትር ኪዩብ
ክብደት = 540,000 ኪሎግራም
1 ቶን = 1000 ኪሎግራም
የ አስፋልታችን ክብደት = 540 ቶን
አንድ የ ክብደት መኪና የመጫን አቅሙ 40 ቶን ነው
የሚያስፈልገን የጭነት መኪና ብዛት= 540 ቶን / 40 ቶን = 13.5
14 ብለን እንውሰድ
@etconp
- Volume of asphalt = L x W x T
- volume of asphalt = 150m x 10m x 0.15m
- volume of asphalt = 225m³
For full answer check it on the image
መልስ
በመጀመሪያ ለ አስፋልቱ ንጣፍ ምን ያህል አስፋልት
(በ ቮሊዩም) እንደሚያስፈልገን እናስላ
ቮሊዩም = ርዝመት x ስፋት x ጥልቀት (ውፍረት)
ቮሊዩም = 150 ሜትር x 10 ሜትር x 0.15 ሜትር (15ሳንቲም)
ቮሊዩም = 225 ሜትሪክ ኪዩብ
ለ አስፋልት ንጣፍ የሚያስፈልገን 225 ሜትሪክ ኪዩብ ነው
ነገር ግን የተነገረን የ መኪናው የመጫኛ አቅም ነው በ volumetric ሳይሆን በ gravimetric (በክብደት ነው) ነው ስለዚህ የሚያስፈልገንን የ አስፋልት መጠን በ ኪሎ ግራም እናስላ ከዛም ወደ ቶን እንቀይር
የ አስፉልቱ በ አንድ ሜትር ኪዩብ 2400 ኪሎግራም ይመዝናል/ተጠቅጥቋል ስለዚህ በ ኪሎግራም ለማግኘት ዴንሲቲ/density ሲባዛ በ ቮሊዩም እናረጋለን
ክብደት (በኪሎ) = ቮሊዩም x ዴንሲቲ/
density
ክብደት = 2400ኪሎግራም በ ሜትር
ኪዩብ x 225 ሜትር ኪዩብ
ክብደት = 540,000 ኪሎግራም
1 ቶን = 1000 ኪሎግራም
የ አስፋልታችን ክብደት = 540 ቶን
አንድ የ ክብደት መኪና የመጫን አቅሙ 40 ቶን ነው
የሚያስፈልገን የጭነት መኪና ብዛት= 540 ቶን / 40 ቶን = 13.5
14 ብለን እንውሰድ
@etconp
❤15🙏6
በሚድሮክ ኢንቨስትመንት ግሩፕ ስር የሚገኘዉ ሚሊኒየም አዳራሽን የማፍረስ ስራ ጀመረ
ባለፉት 18 ዓመታት በኢትዮጵያ ግዙፍ አገራዊና ዓለም አቀፋዊ ኩነቶች ሲያስተናግድ የቆየው ሚሊኒየም አዳራሽ፣ በሚድሮክ ኢንቨስትመንት ግሩፕ ለታቀደው ሰፊ የመልሶ ግንባታና የማስፋፊያ ስራ እንዲመች የማስፈረስ ሂደት ተጀምሯል።
ይህ ታላቅ የአዳራሽ እድሳትና የማስፋፊያ ፕሮጀክት በዋናነት ኢትዮጵያ ለምታስተናግደው 32ኛው የዓለም የአየር ንብረት ለውጥ ጉባኤ (COP32) ዝግጅት አካል ሲሆን፣ በቦታው ላይ Moxy by Marriott የተሰኘ ግዙፍና ዘመናዊ ሆቴል ይገነባል።
በዚያስ አርክቴክቸር የተነደፈው ይህ የመልሶ ግንባታ ፕሮጀክት ከመሬት በታች ሰፊ የመኪና ማቆሚያ፣ የላቀ ቴክኖሎጂ እና የተሻሻለ የእግረኞች ፍሰትን ያካተተ ሲሆን፣ የአዳራሹን የማስተናገድ አቅም እና ዘመናዊነት ይበልጥ በማሳደግ ተጨማሪ ጎብኚዎችን ለመሳብ ያለመ መሆኑ ተጠቁሟል።
የሚድሮክ ኢንቨስትመንት ግሩፕ ዋና ስራ አስፈጻሚ አቶ ጀማል አህመድ ቀደም ብለው እንደገለጹት፣ ግሩፑ ለ32ኛው የዓለም የአየር ንብረት ለውጥ ጉባኤ ተሳታፊዎች የሚሆኑ 1,500 አልጋዎችን የያዙ አምስት ዘመናዊ ሆቴሎችን በአዲስ አበባ ለመገንባት በከፍተኛ ርብርብ ላይ ይገኛል።
ከእነዚህም መካከል በሚሊኒየም አዳራሽ ቅጥር ግቢ የሚገነባው "Moxy by Marriott"፣ በመሀመድያ የመኖሪያ መንደር የሚገነባው "Four Points by Sheraton" እና በሸራተን አዲስ ቅጥር ግቢ ውስጥ የሚገነባው ሌላ ተጨማሪ ዘመናዊ ሆቴል ተጠቃሽ ናቸው።
በተጨማሪም በቅርቡ ወደ ሚድሮክ ቤተሰብ የተቀላቀለው ዋቢሸበሌ ሆቴል በ "Autograph Collection by Marriott" ብራንድ ደረጃውን ጠብቆ ለጉባኤው ዝግጁ የሚሆን ሲሆን፣ በአፍሪካ ህብረት አጠገብ የሚገኘው "Westin Addis" ቀሪ ስራዎችም እየተጠናቀቁ ይገኛሉ።
ግሩፑ ከአዲስ አበባ በተጨማሪ በክልል ከተሞችም የሆቴል ኢንዱስትሪውን ለማስፋፋት በርካታ ስራዎችን እያከናወነ ይገኛል። በዚሁ መሰረት በጂማ እና በሀዋሳ ከተሞች "Four Points by Sheraton" ሆቴሎች ግንባታ ላይ ሲሆኑ፣ በባህር ዳር ከተማ ደግሞ "Four Points by Sheraton" እና "Protea by Marriott" ሆቴሎችን ለመገንባት ዝግጅቱ መጠናቀቁ ታውቋል።
ከዚህም ባሻገር ሚድሮክ በቅርቡ የላንጋኖ ሳቫና ሪዞርትን በግዥ የተረከበ ሲሆን፣ ስፍራውን በማርዮት ብራንዶች ስር ወደ ዓለም አቀፍ ደረጃ በማሳደግ ወደ ስራ ለመግባት እቅድ ይዟል።
በ2000 ዓ.ም. በኢትዮጵያ ሚሊኒየም አከባበር ወቅት አገልግሎት መስጠት የጀመረው ይህ ግዙፍ አዳራሽ፣ በ20 ሺህ ስኩዌር ሜትር ላይ ያረፈና በአንድ ጊዜ እስከ 25 ሺህ ሰዎችን የመያዝ አቅም ያለው የአገሪቱ ግንባር ቀደም መሰብሰቢያ ስፍራ ነው። ከታህሳስ 2018 ጀምሮ ሙሉ በሙሉ ሊፈር እንደሆነ ካፒታል ከዚህ ቀደም መዘገብ የሚታወስ ሲሆን አሁን ግን ከታቀደበት ወራት ዘግየት ብሎ የካቲት 2018 መጨረሻ ላይ ተጀምሯል።
በአዲስ መልኩ እንዲገነባ የተወሰነው ይህ አዳራሽ፣ ለግንባታው የሚወጣው የኢንቨስትመንት መጠንና የስራ ተቋራጩ ማንነት በቀጣይ ይፋ እንደሚደረግ ተመላክቷል። ፕሮጀክቱ ሲጠናቀቅ አዳራሹ ካለው ታሪካዊ ፋይዳ ባሻገር ለዘመናዊ የከተማ ልማት እና ለዓለም አቀፍ ዲፕሎማሲያዊ ኩነቶች ምቹ የሆነ መሠረተ ልማት ሆኖ እንደሚያገለግል ታምኖበታል።
Via ካፒታል
@etconp
ባለፉት 18 ዓመታት በኢትዮጵያ ግዙፍ አገራዊና ዓለም አቀፋዊ ኩነቶች ሲያስተናግድ የቆየው ሚሊኒየም አዳራሽ፣ በሚድሮክ ኢንቨስትመንት ግሩፕ ለታቀደው ሰፊ የመልሶ ግንባታና የማስፋፊያ ስራ እንዲመች የማስፈረስ ሂደት ተጀምሯል።
ይህ ታላቅ የአዳራሽ እድሳትና የማስፋፊያ ፕሮጀክት በዋናነት ኢትዮጵያ ለምታስተናግደው 32ኛው የዓለም የአየር ንብረት ለውጥ ጉባኤ (COP32) ዝግጅት አካል ሲሆን፣ በቦታው ላይ Moxy by Marriott የተሰኘ ግዙፍና ዘመናዊ ሆቴል ይገነባል።
በዚያስ አርክቴክቸር የተነደፈው ይህ የመልሶ ግንባታ ፕሮጀክት ከመሬት በታች ሰፊ የመኪና ማቆሚያ፣ የላቀ ቴክኖሎጂ እና የተሻሻለ የእግረኞች ፍሰትን ያካተተ ሲሆን፣ የአዳራሹን የማስተናገድ አቅም እና ዘመናዊነት ይበልጥ በማሳደግ ተጨማሪ ጎብኚዎችን ለመሳብ ያለመ መሆኑ ተጠቁሟል።
የሚድሮክ ኢንቨስትመንት ግሩፕ ዋና ስራ አስፈጻሚ አቶ ጀማል አህመድ ቀደም ብለው እንደገለጹት፣ ግሩፑ ለ32ኛው የዓለም የአየር ንብረት ለውጥ ጉባኤ ተሳታፊዎች የሚሆኑ 1,500 አልጋዎችን የያዙ አምስት ዘመናዊ ሆቴሎችን በአዲስ አበባ ለመገንባት በከፍተኛ ርብርብ ላይ ይገኛል።
ከእነዚህም መካከል በሚሊኒየም አዳራሽ ቅጥር ግቢ የሚገነባው "Moxy by Marriott"፣ በመሀመድያ የመኖሪያ መንደር የሚገነባው "Four Points by Sheraton" እና በሸራተን አዲስ ቅጥር ግቢ ውስጥ የሚገነባው ሌላ ተጨማሪ ዘመናዊ ሆቴል ተጠቃሽ ናቸው።
በተጨማሪም በቅርቡ ወደ ሚድሮክ ቤተሰብ የተቀላቀለው ዋቢሸበሌ ሆቴል በ "Autograph Collection by Marriott" ብራንድ ደረጃውን ጠብቆ ለጉባኤው ዝግጁ የሚሆን ሲሆን፣ በአፍሪካ ህብረት አጠገብ የሚገኘው "Westin Addis" ቀሪ ስራዎችም እየተጠናቀቁ ይገኛሉ።
ግሩፑ ከአዲስ አበባ በተጨማሪ በክልል ከተሞችም የሆቴል ኢንዱስትሪውን ለማስፋፋት በርካታ ስራዎችን እያከናወነ ይገኛል። በዚሁ መሰረት በጂማ እና በሀዋሳ ከተሞች "Four Points by Sheraton" ሆቴሎች ግንባታ ላይ ሲሆኑ፣ በባህር ዳር ከተማ ደግሞ "Four Points by Sheraton" እና "Protea by Marriott" ሆቴሎችን ለመገንባት ዝግጅቱ መጠናቀቁ ታውቋል።
ከዚህም ባሻገር ሚድሮክ በቅርቡ የላንጋኖ ሳቫና ሪዞርትን በግዥ የተረከበ ሲሆን፣ ስፍራውን በማርዮት ብራንዶች ስር ወደ ዓለም አቀፍ ደረጃ በማሳደግ ወደ ስራ ለመግባት እቅድ ይዟል።
በ2000 ዓ.ም. በኢትዮጵያ ሚሊኒየም አከባበር ወቅት አገልግሎት መስጠት የጀመረው ይህ ግዙፍ አዳራሽ፣ በ20 ሺህ ስኩዌር ሜትር ላይ ያረፈና በአንድ ጊዜ እስከ 25 ሺህ ሰዎችን የመያዝ አቅም ያለው የአገሪቱ ግንባር ቀደም መሰብሰቢያ ስፍራ ነው። ከታህሳስ 2018 ጀምሮ ሙሉ በሙሉ ሊፈር እንደሆነ ካፒታል ከዚህ ቀደም መዘገብ የሚታወስ ሲሆን አሁን ግን ከታቀደበት ወራት ዘግየት ብሎ የካቲት 2018 መጨረሻ ላይ ተጀምሯል።
በአዲስ መልኩ እንዲገነባ የተወሰነው ይህ አዳራሽ፣ ለግንባታው የሚወጣው የኢንቨስትመንት መጠንና የስራ ተቋራጩ ማንነት በቀጣይ ይፋ እንደሚደረግ ተመላክቷል። ፕሮጀክቱ ሲጠናቀቅ አዳራሹ ካለው ታሪካዊ ፋይዳ ባሻገር ለዘመናዊ የከተማ ልማት እና ለዓለም አቀፍ ዲፕሎማሲያዊ ኩነቶች ምቹ የሆነ መሠረተ ልማት ሆኖ እንደሚያገለግል ታምኖበታል።
Via ካፒታል
@etconp
❤5👍5👏1
👉Bar Bending Schedule
🚧Just like any other schedules, bar bending schedule is most important part of any project.
⏺It helps in doing reconciliation of steel and controlling the wastage at site.
⭐️If bar bending schedule (BBS) is not prepared at site, then contractor and its workmen tend to cut and and bend bars without quantifying it and leads to more wastage due to over doing it.
🏷Engineer who going to use this sheet for doing BBS should aware of following;
- Should be able to read the structural and architectural drawings.
-Should know where the lapping of bar is to be done.
- Should know how to calculate number of bar as per spacing in any given member.
- Basic knowledge of using excel sheet.
@etconp
🚧Just like any other schedules, bar bending schedule is most important part of any project.
⏺It helps in doing reconciliation of steel and controlling the wastage at site.
⭐️If bar bending schedule (BBS) is not prepared at site, then contractor and its workmen tend to cut and and bend bars without quantifying it and leads to more wastage due to over doing it.
🏷Engineer who going to use this sheet for doing BBS should aware of following;
- Should be able to read the structural and architectural drawings.
-Should know where the lapping of bar is to be done.
- Should know how to calculate number of bar as per spacing in any given member.
- Basic knowledge of using excel sheet.
@etconp
❤5🥰1