Ethio Construction Engineering
32.3K subscribers
6.28K photos
359 videos
1.99K files
3.34K links
๐Ÿ”จ World Construction Engineering
Latest updates, tips, and tutorials on building, civil engineering, and construction in World.
Learn, build, and grow with us!

๐Ÿ“จ @Philemona7 Or @ETCONpBOT

For Ad:- https://telega.io/c/etconp
Download Telegram
๐Ÿ‘†๐Ÿ‘†๐Ÿ‘† Note: 1meter=3.048ft
๐Ÿ‘‰ แŠจ แ‰ณแˆชแŠญ แˆ›แˆ…แ‹ฐแˆญ แ‰  Building Codes แ‹™แˆญแ‹ซ @COTMp
.
Building Codes - แ‹จแˆšแŒˆแАแ‰ก แˆ…แŠ•แƒแ‹Žแ‰ฝ แˆ›แˆŸแˆ‹แ‰ต แ‹จแˆšแŒˆแ‰ฃแ‰ธแ‹แŠ•
แŠฅแˆตแ‰ณแŠ•แ‹ณแˆญแ‹ถแ‰ฝ แ‹จแ‹ซแ‹˜ แ‹จแˆ…แŒŽแ‰ฝ แˆตแ‰ฅแˆตแ‰ฅ แАแ‹แกแก แˆ…แŠ•แƒแ‹Žแ‰ฝ แ‹จแŒแŠ•แ‰ฃแ‰ณ
แแ‰ƒแ‹ตแŠ• แˆˆแˆ›แŒแŠ˜แ‰ต Building Code แˆ˜แŠจแ‰ฐแˆ แŠ แˆˆแ‰ฃแ‰ธแ‹แกแก
แ‹จแŠฅแˆตแ‰ณแŠ•แ‹ณแˆญแ‹ถแ‰น แŠ แˆตแˆแˆ‹แŒŠแАแ‰ตแˆ - แˆดแแ‰ฒ แค แŒคแŠ“ แŠฅแŠ“ แŒ แ‰…แˆ‹แˆ‹
แ‹จแˆ…แŠ•แƒแ‹แŠ• แ‹ฐแˆ…แŠ•แАแ‰ต ( Structural , Mechanical , Sanitary , Fire resistance. Earth quake, Flood , Water Supply, Light, Ventilation, แ‹ˆแ‹˜แ‰ฐ ) แˆˆแˆ›แˆจแŒ‹แŒˆแŒฅ แАแ‹ โ€ฆโ€ฆ. แŠฃแˆˆแˆ›แ‰ฝแŠ• แˆ‹แ‹ญ EBCS,Eurocode , IS, BS, แ‹ˆแ‹˜แ‰ฐ แ‹จแˆแŠ•แˆ‹แ‰ธแ‹ แ‹จแˆ…แŠ•แŒป แŠฎแ‹ถแ‰ฝ แŠฃแˆ‰แกแก แ‹จแŠ› แ‹ฐแˆž EBCS(Ethioian building code of standards) แ‹ญแ‰ฃแˆˆแˆแข
.
.
แŠจแˆ‹แ‹ญ แ‹จแˆแ‰ตแˆ˜แˆˆแŠจแ‰ฑแ‰ต แˆ…แŠ•แƒ แ‰ แˆƒแŒˆแˆจ แˆฉแˆฒแ‹ซ - แˆ™แˆ‰ แˆˆแˆ™แˆ‰
แŠจแŠฅแŠ•แŒจแ‰ต แ‰ฐแŒˆแŠ•แ‰ แ‰ถ แ‹จแАแ‰ แˆจ แˆจแŒ…แˆ แˆ…แŠ•แƒ แˆฒแˆ†แŠ• Fire resistance
standard แ‰ฃแˆˆแˆŸแˆŸแˆ‹แ‰ฑ แ‹จแŠ แŠซแ‰ฃแ‰ขแ‹ แ‰ฃแˆˆแˆตแˆแŒฃแŠ“แ‰ต แŠ แแˆญแˆฐแ‹แ‰ณแˆแกแก
๐Ÿ‘2
๐Ÿ‘‰ แ‰ฃแˆ…แˆญแ‹ณแˆญ๐Ÿ˜
แˆธแŒ‹ แˆˆแˆŠแ‰ต แ‰ฐแˆ˜แŠ˜แŠ•! @COTMp
According to ASTM standard types of portland cement are
1. Type 1 or normal portland cement
# general purpose cement
# used where there would be no severe climate change
# used where there is no severe exposure to sulphate attack from water or soil
2. Type 2 or moderate portland cement
# used in climate of moderate sulphate attack
# moderate heat of hydration
3. Type 3 or high early strength pc
# used where high early strength is desired,usually less than one weak
# when a structure must be put into service as quickly as possible
# less C2S and more C3S
4. Type 4 or low heat of hydration pc
# develops strength at a slower rate than does type 1
# intended for mass structures such as large gravity dams
5. Type 5 or sulfate resisting pc
# when high sulfate resistance is desired
# when concrete is to be exposed to severe sulfate action by soil or water
# contains less C3A
For more topics join @COTMp
๐Ÿ‘1
Mortar is a mixture of cement, aggregate, and water. The mortar paste hardens on drying and binds the bricks, stones or concrete blocks together.

Uses of mortar:

1: Used in masonry to bind stones, bricks, and concrete block together.
2: Used for pointing the joints and to give the work a pleasing and smooth finish.
3: Bonding masonry units together, either non reinforced or reinforced.
4: Leveling or seating the units.
5: For pointing the joints of masonry.
6: For plastering the masonry to protect it from the weather and give a smooth finish.
7: In concrete, it is used to bind the particles of coarse aggregate into one solid mass.
๐Ÿ‘1
LAWS OF CONTRACT

according to civil code art.1675
Contract is an agreement b/n 2 parties and it needs to be
๐Ÿ‘‰concent
๐Ÿ‘‰legal and lawful
๐Ÿ‘‰possible
๐Ÿ‘‰valid before court
๐Ÿ‘‰must has offeree and offerer
.
.
.etc
Purpose of contract
๐Ÿ‘‰to avoid risk of non performance
๐Ÿ‘‰to describe scope of work
๐Ÿ‘‰to establish time frame
๐Ÿ‘‰to establish cost and payment provision
๐Ÿ‘‰to set for the obligation and relationships
๐Ÿ‘‰to manage multiple risk
๐Ÿ‘‰to minimize dispute and claim
Types of construction contract
1Lump sum:- the contractor offered to do the whole work for the total stipulated money
2 Unit rate:- amount to be received by the contractor depends up on the quantities of various items of work actually executed
3 Lump sum and Schedule:- contractor offered to do a particular work at a fixed sum within a specified time as per plan and specifications
4 Cost plus:- used in difficult situation either for the owner or contractor to predict the cost during negotiations
4.1Cost plus fixxed fee
4.2 Cost plus percentage of cost
.
.
.
For more updates join
๐Ÿ‘‡๐Ÿ‘‡๐Ÿ‘‡๐Ÿ‘‡๐Ÿ‘‡๐Ÿ‘‡๐Ÿ‘‡
http://t.me/COTM
๐Ÿ‘†๐Ÿ‘†๐Ÿ‘†๐Ÿ‘†๐Ÿ‘†๐Ÿ‘†๐Ÿ‘†
๐Ÿ‘1
Types of Joints in Construction
Construction Joints

Expansion Joints
Contraction Joints

Construction Joints
At first, we cannot pour a larger quantity of concrete in a
single time. So at that time, a certain portion has poured as
per the recommended shuttering design and the remaining
portion will be poured after a certain period.
In that, the construction joints are using to connect the old
and fresh concrete and it is also called as cold joints.
๐Ÿ‘1
Specification of Construction Joints
The existing concrete should have an uneven surface
and free from dust.
A proper vibration has to be done near to the joint to
develop the proper bond between the old and new
concrete.
After pouring of new concrete the joint surface must
be clean out laitance and slurry by the wire brush.
๐Ÿ‘1
Expansion Joints
As we discussed, the construction materials are formed by
the different raw material. The concrete may shrink or
expand due to the weather condition.
So the expansion joints gap are provided to accommodate
the movement happening by the expansion or shrinkages
and it is avoiding the disfiguration of the structure.
Mostly the expansion joint gaps are providing in large
structure & bridge girder to spread eventual stress. The joint
gaps are filled by the expansion material like fibre, bitumen
or some other special material.
Specification
Expansion joint might be provided in mid of each
span in bridges.
The provision of expansion joints is when the
structure length exceeding 45m.
The reinforcements should not be provided on the
expansion joint area.
The expansion joint material will be different based on
the structure.
The expansion joints are provided as per IS 3414.
Contraction Joints
It is another type of joints which controls the cracks
happening due to shrinkages. The contraction joints are
placed as a groove where the crack may form in concrete.
If the shrinkage crack is formed in the concrete slab then
the contraction joints prevent spreading on the other area.
โค1๐Ÿ‘1
Contraction Joints
It is another type of joints which controls the cracks
happening due to shrinkages. The contraction joints are
placed as a groove where the crack may form in concrete. If the shrinkage crack is formed in the concrete slab then the contraction joints prevent spreading on the other area.
Specification The width of the groove should not be less than 5mm.
The contraction joint depth is 1/4th of the Concrete mean depth.
It should be placed in the weakest zone of the slab.
Another name of contraction joint is Control Joint .
Ethio Construction Engineering
Photo
๐Ÿ‘‰แ‹จแ‰ปแ‹ญแŠ“แ‹ Three Gorges Dam แŠ แˆตแŒˆแˆซแˆš แ‰แŒฅแˆฎแ‰ฝ @COTMp
.
* แ‹จแŒแ‹ตแ‰กแŠ• แˆ˜แˆฐแˆจแ‰ต แˆˆแˆ˜แˆตแˆซแ‰ต 80,000 แ‹ตแˆ›แˆšแ‰ต แˆฒแŒ แ‰€แˆ™ แ‹ญแˆ…
แˆ›แˆˆแ‰ต แŠจ20 แ‹จแˆ‚แˆฎแˆบแˆ› แ‹จแŠ’แ‹แŠญแˆŒแˆญ แŒฅแ‰ƒแ‰ถแ‰ฝ แŒ‹แˆญ แŠฅแŠฉแˆ แАแ‹แกแก
.
* แ‹จแŒแ‹ตแ‰ก Reservoir แˆญแ‹แˆ˜แ‰ต 660แŠช.แˆœ แАแ‹ - แ‹ญแˆ…แˆ แˆ›แˆˆแ‰ต
แŠจแŠ .แŠ  แˆ›แ‹ญแŒจแ‹ แŠฅแŠ•แ‹ฐแˆ›แˆˆแ‰ต แАแ‹แกแก
.
*18200 MW แ‹ซแˆ˜แАแŒซแˆ แ‹ญแˆ…แˆ 7965mw แŠจแˆšแ‹ซแˆ˜แАแŒจแ‹
แ‹จแŒƒแ“แŠ‘ Kashiwazaki-Kariwa แ‹จแ‹“แˆˆแˆ›แ‰ฝแŠ• แ‰ตแˆแ‰ แ‹จแŠ’แ‹แŠญแˆŒแˆญ
แˆ›แ‰ฅแˆŠแ‹ซ 230 แแˆญแˆฐแ‰ตแŠ• แ‹ญแ‰ แˆแŒฃแˆแกแก แŠจแˆ…แ‹ณแˆด แŒแ‹ตแ‰ฅ แ‹ฐแˆž 300 แแˆญแˆฐแ‰ต/ 3 แŠฅแŒฅแ แ‹ญแ‰ แˆแŒฃแˆแกแก
.
*แŒแŠ•แ‰ฃแ‰ณแ‹ 30 แˆšแˆŠแ‹จแŠ• แˆœแ‰ตแˆญ แŠชแ‹ฉแ‰ฅ แŠฎแŠ•แŠญแˆชแ‰ต แˆแŒ…แ‰ทแˆ - แ‹ญแˆ…แˆ
แˆ›แˆˆแ‰ต 30 แˆšแˆŠแ‹จแŠ• แˆœแ‰ตแˆญ แŠชแ‹ฉแ‰ฅ แŠฎแŠ•แŠญแˆชแ‰ต แ‰ฐแŒ แ‰…แˆ˜แŠ• 1 แˆœแ‰ตแˆญ
แ‹ฒแ‹ซแˆœแ‰ตแˆญ แ‹ซแˆˆแ‹ แ‹ตแแŠ• แŠฎแŠ•แŠญแˆชแ‰ต pipe แ‰ฅแŠ•แˆฐแˆซ แ‹“แˆˆแˆแŠ• แŠ แŠ•แ‹ต แ‹™แˆญ
แˆ˜แ‹žแˆญ แ‹ญแ‰ฝแˆ‹แˆแกแก
.
*463,000 แ‰ถแŠ• แ‰ฅแˆจแ‰ต แ‹จแ‰ฐแŒ แ‰€แˆ™ แˆฒแˆ†แŠ• - แ‹ญแˆ…แŠ• แ‹ซแˆ…แˆ แ‰ถแŠ• แ‰ฅแˆจแ‰ต
แ‰ฐแŒ แ‰…แˆ˜แŠ• 63 แŠคแแˆ แ‰ณแ‹ˆแˆฎแ‰ฝแŠ• แˆ˜แŒˆแŠ•แ‰ฃแ‰ต แŠฅแŠ•แ‰ฝแˆ‹แˆˆแŠ•แกแก
.
*แ‰ แŠ แˆ›แŠซแŠ 77.5 แˆœแ‰ตแˆญ width แˆฒแŠ–แˆจแ‹ แ‹ญแˆ…แˆ แŠจแˆ›แŠ•แŠ›แ‹แˆ
แŠ แ‰…แŒฃแŒซ แ‹จแˆšแˆ˜แŒก แ‹จแˆšแˆณแŠคแˆ แŒฅแ‰ƒแ‰ถแ‰ฝแŠ• แŠฅแŠ•แ‹ฒแ‰‹แ‰‹แˆ
แ‹ซแ‹ฐแˆญแŒˆแ‹‹แˆแกแก แ‰ แ‰ฐแŒจแˆ›แˆชแˆ แŠจแŒแ‹แˆแ‰ฑ แ‹จแ‰ฐแАแˆณ แ‹จแ‰€แŠ• แŠฅแˆญแ‹แˆ˜แ‰ต
แ‰ แˆ›แ‹ญแŠญแˆฎ แˆฐแŠจแŠ•แ‹ต แŠฅแŠ•แ‹ฒแŒจแˆแˆญ แŠ แ‹ตแˆญแŒ“แˆแกแก แŠจแ‰ณแˆ‹แ‰ แ‹จแ‰ปแ‹ญแŠ“ แŒแŠ•แ‰ฅ
แ‰€แŒฅแˆŽ แŠจแˆตแ”แˆต แˆ‹แ‹ญ แ‹จแˆšแ‰ณแ‹ญ แ‹จแ‰ปแ‹ญแŠ“ แˆแˆˆแ‰ฐแŠ›แ‹ แ‹จแˆฒแ‰ชแˆ
แŠขแŠ•แŒ‚แАแˆชแŠ•แŒ แ‹แŒคแ‰ต แАแ‹แกแก
.
*แŒแŠ•แ‰ฃแ‰ณแ‹ แŠจ630 แ‰ขแˆŠแ‹จแŠ• แ‰ฅแˆญ แ‰ แˆ‹แ‹ญ แˆฒแˆแŒ… แ‰  2012 แ‰ฐแŒ แŠ“แ‰† แŠจ1 แ‹“แˆ˜แ‰ต แŠจ6 แ‹ˆแˆญ แ‰ แŠ‹แˆ‹ แˆ™แˆ‰ แ‹ˆแŒชแ‹แŠ• แˆ˜แˆแˆทแˆแกแก
.
*แˆ€แ‰ฅแ‰ณแˆŸ แˆ€แŒˆแˆญ แˆณแ‹แ‹ฒ แŠ แˆจแ‰ขแ‹ซ แŠจแАแ‹ณแŒ… แฃ แŠจแŠฅแŠ•แ‹แˆŽแ‰ต แ‹ˆแ‹˜แ‰ฐ
55000MW แˆตแ‰ณแˆ˜แАแŒญ แˆ€แŒˆแˆซแ‰ฝแŠ• แŠขแ‰ตแ‹ฎแŒตแ‹ซ แ‹ฐแŒแˆž แ‰ แ‰ตแŠ•แˆน
45000MW แŠจแ‹แˆƒ แ‰ฅแ‰ป แˆ›แˆ˜แŠ•แŒจแ‰ต แ‰ตแ‰ฝแˆ‹แˆˆแ‰ฝ
* แŠฅแˆตแŠซแˆแŠ• แ‰ฃแˆˆแ‹ 4000MW แŠ แ‹ญแˆ†แŠ•แˆ แ‹จแˆแŠ“แˆ˜แАแŒจแ‹แกแก
18200 MW แ‹จแˆšแ‹ซแˆ˜แАแŒจแ‹ 630 แ‰ขแˆŠแ‹จแŠ• แ‰ฅแˆญ แˆแˆˆแ‰ต แ‹“แˆ˜แ‰ต แ‰ฃแˆแˆžแˆ‹ แŒŠแ‹œ แ‹แˆตแŒฅ แ‹จแˆ˜แˆˆแˆฐ แŠขแ‰ตแ‹ฎแŒตแ‹ซ 45000 MW แˆตแ‰ณแˆ˜แАแŒญ แˆแŠ• แ‹ซแˆ…แˆ
แ‰ฅแˆญ แˆ›แŒแŠ˜แ‰ต แŠฅแŠ•แ‹ฐแˆแ‰ตแ‰ฝแˆ แŠ แˆตแ‰กแ‰ตแข
แˆˆแˆ›แŠ•แŠ›แ‹แˆ Hydraulic Engineering แ‹ญแˆ…แŠ• แ‹ซแˆ…แˆ แ‰ฐแ…แ‹•แŠ– แˆ˜แแŒ แˆญ แ‹ญแ‰ฝแˆ‹แˆแกแก
โค1
๐Ÿ‘‰แˆตแˆˆ TRUSS ... @COTMp
.
*Truss แ‹จแˆแŠ•แˆˆแ‹ Axial Load (compressive & tensile force) แ‰ฅแ‰ป แ‹จแˆšแˆธแŠจแˆ™ แˆ˜แ‹‹แ‰…แˆฎแ‰ฝ แŠ“แ‰ธแ‹แกแก
แ‹จแ‰ตแˆจแˆต แˆœแˆแ‰ แˆฎแ‰ฝ แ‹จแˆšแŒˆแŠ“แŠ™แ‰ต แ‰ แ’แŠ• แŠฎแŠ”แŠญแˆฝแŠ• แˆ›แˆˆแ‰ตแˆ (แ‰ แŠ แ‰ฅแ‹›แŠ›แ‹ แ‰ แ‰ฅแ‹จแ‹ณแŠ“ แ‰ แ‰ฅแˆŽแŠ• ) แАแ‹ แ‹จแˆšแŒˆแŠ“แŠ™แ‰ตแกแก
*แˆแˆˆแ‰ต แŠ แ‹ญแАแ‰ต แ‰ตแˆจแˆถแ‰ฝ แŠ แˆ‰ Plain (2D) and Space truss (3D
แˆˆแˆแˆณแˆŒ แ‹จแ‰ดแˆŒ แ‰ณแ‹ˆแˆฎแ‰ฝ )แกแก *แ‰ตแˆจแˆถแ‰ฝแŠ• แˆˆแˆ…แŠ•แƒแŠ“ แˆˆแ‹ตแˆแ‹ตแ‹ฎแ‰ฝ
แ‰ฐแˆ˜แˆซแŒญ แ‹จแˆ†แŠ‘แ‰ แ‰ต แˆแŠญแŠ•แ‹ซแ‰ต แŒ แŠ•แŠซแˆซแŠ“ แŠญแ‰ฅแ‹ฐแ‰ณแ‰ธแ‹ แ‰€แˆ‹แˆ แˆตแˆˆแˆ†แА แАแ‹แกแก แŠฅแŠ“แˆ แ‹›แˆฌ แˆตแˆˆแ‰ตแˆจแˆต แˆแŠ“แ‹ˆแˆซ แ‹จแ‰ปแˆแŠ•แ‰ แ‰ต แ‹‹แАแŠ› แˆแŠญแŠ•แ‹ซแ‰ต แ‰ฅแ‹™ แˆณแ‹ญแ‰ถแ‰ฝ แˆ‹แ‹ญ แ‹จแŒแŠ•แ‰ฃแ‰ณ แŒแ‹ตแˆแ‰ต แˆตแˆˆแˆแŠ“แ‹ญ แŠ แŠ•แ‹ณแŠ•แ‹ต แАแŒˆแˆญ แˆˆแˆ˜แŒ แ‰†แˆ แ‹ซแˆ…แˆ แАแ‹::
แˆแŠ•แ‹ตแАแ‹ แАแŒˆแˆฉ แ‰ตแˆจแˆถแ‰ฝ แˆฒแˆแŒ แˆฉ Axial Load แ‰ฅแ‰ป แŠฅแŠ•แ‹ฒแˆธแŠจแˆ™ แАแ‹ แˆบแˆญแŠ“ แˆžแˆ˜แŠ•แ‰ต แˆ˜แˆธแŠจแˆ แŠ แ‹ญแ‰ฝแˆ‰แˆ - Axial แŽแˆญแˆตแˆ แ‹จแˆšแˆธแŠจแˆ™แ‰ต แ‹จแˆšแˆ˜แŒฃแ‹แŠ• แˆŽแ‹ต แ‰€แŒฅแ‰ณ แˆ˜แŒˆแŠ“แŠ›แ‰ธแ‹ แ‹ˆแ‹ญแˆ joint แˆ‹แ‹ญ แˆฒแŒซแŠ•แ‰ฃแ‰ธแ‹ แ‰ฅแ‰ป แАแ‹:: แ‹ญแˆ…แˆ แŠจแŒ†แ‹ญแ‰ฑ แАแ‹ แ‹ˆแ‹ฐ แˆœแˆแ‰ แˆฎแ‰ฝ แˆ„แ‹ถ แŠจแ‹› แАแ‹ แ‹ˆแ‹ฐ แŠฎแˆˆแŠ• แ‹ˆแ‹ญแˆ แ‰ขแˆ แ‹จแˆšแˆ„แ‹ฐแ‹ - แˆณแ‹ญแ‰ต แˆ‹แ‹ญ แŒแŠ• แแˆญแˆŠแŠ‘แŠ• แˆ˜แˆƒแˆ แˆœแˆแ‰ แˆฎแ‰น แˆ‹แ‹ญ แˆฒแ‰ แ‹ญแ‹ฑแ‰ต แ‹ญแ‰ณแ‹ซแˆ - joint แˆ‹แ‹ญ แАแ‹ แˆ˜แ‰ แ‹จแ‹ต แ‹ˆแ‹ญแˆ แˆ˜แ‰ณแˆฐแˆญ แ‹ซแˆˆแ‰ แ‰ต - แˆณแ‹ญแ‰ต แˆ‹แ‹ญ แ‹จแˆšแ‹ฐแˆจแŒˆแ‹ แŠจแˆณแ‹ญแŠ•แˆต แ‹แŒช แАแ‹ แˆƒแ‹ญแˆˆแŠ› แŠ•แ‹แˆต แ‹ˆแ‹ญแˆ แ‹แŠ“แ‰ฅ แ‹ซแˆˆแ‰ฃแ‰ธแ‹ แŠ แŠซแ‰ฃแ‰ขแ‹Žแ‰ฝ แ‹ญแˆ… แАแŒˆแˆญ แŠ แˆณแˆณแ‰ข แŠฅแŠ“ แŠฃแ‹ฐแŒ‹แˆ แˆŠแ‹ซแ‹ฐแˆญแˆต แ‹ญแ‰ฝแˆ‹แˆแกแก
Share Share Share
๐Ÿ‘4
๐Ÿ‘‰แˆตแˆˆ Road structure components @COTMp
.
*Super Elevation = แ‹จแˆ˜แŠ•แŒˆแ‹ต Curve แˆ‹แ‹ญ แˆ˜แŠชแŠ“แŠ• แŠจแˆ˜แŠ•แŒˆแ‹ฑ
แ‹แŒช แ‹จแˆšแŒŽแ‰ตแ‰ตแŠ• Centrifugal Force แˆˆแˆ˜แ‰‹แ‰‹แˆ แ‹จแŠ แˆตแ“แˆแ‰ฑ
แŠจแˆญแ‰ญ แ‹™แˆชแ‹ซแ‹แŠ• แŠจแ แ‰ฐแ‹ฐแˆญแŒŽ แ‹ญแˆฐแˆซแˆ - แˆˆแˆนแŒแˆฉแˆ แˆแ‰พแ‰ตแŠ• แ‹ญแˆฐแŒฃแˆ แŠฅแŠ•แ‹ฒแˆแˆ แ‰ แˆšแ‰ณแŒ แแ‰ แ‰ต แŒแ‹œ แŠฃแ‹ฐแŒ‹แŠ• แ‹ญแ‰€แŠ•แˆณแˆแกแก
.
*Pavement Crown = แˆˆแแˆณแˆฝ แ‰ฐแ‰ฅแˆŽ แ‹จแŠ แˆตแ“แˆแ‰ฑ แˆ˜แˆƒแˆ แŠจแ‹ณแˆญแŠžแ‰น แ‹ญแˆแ‰… แŠจแ แ‰ฐแ‹ฐแˆญแŒŽ แ‹ญแˆฐแˆซแˆ แ‹จแˆšแˆฐแˆซ แŠฎแˆแแАแŠ•แ‰ต แАแ‹แข แˆŒแˆŽแ‰ฝแˆ components แŠจแˆ‹แ‹ญ แ‰  แ’แŠญแ‰ธแˆฉ แŠฅแŠ•แ‹ฐแˆแ‰ณแ‹ฉแ‰ต แ‹ฒแ‹แ‹ญแŠ• แ‰ฐแ‹ฐแˆญแŒˆแ‹‹แˆ
.
แˆˆแˆแˆ‰แˆ แŠฅแŠ•แ‹ฒแ‹ณแˆจแˆต แ–แˆตแ‰ถแ‰นแŠ• SHARE แŠ แ‹ตแˆญแŒ‰แˆแŠ•แข
๐Ÿ‘3
๐Ÿ‘‰ แŠฅแˆตแ‰ฒ แŠฃแˆแŠ• แ‹ฐแˆž แˆตแˆˆ Sheet Pile Wall แ‰ตแŠ•แˆฝ แŠฅแŠ•แŠ•แŒˆแˆซแ‰นแข @COTMp
.
*แŠฅแАแ‹šแˆ…แŠ• แŠจแˆ‹แ‹ญ แ‹จแˆแ‰ณแ‹ฉแ‰ตแŠ• แˆแˆตแˆ Sheet Pile แ‹ญแ‰ฃแˆ‹แˆ‰ แŠฅแАแ‹šแˆ… แˆฒแˆตแ‰ฐแˆžแ‰ฝ แ‰ แˆ›แ‹ซแ‹ซแ‹ แŠ แŠ•แ‹ต แ‹ˆแŒฅ แŒแ‹ตแŒแ‹ณ/wall แˆˆแˆ˜แŒˆแŠ•แ‰ฃแ‰ต แŠฅแŠ•แŒ แ‰€แˆแ‰ฃแ‰ธแ‹‹แˆˆแŠ•แกแก
*Sheet pile แ‹Žแˆ แŠฅแŠ•แ‹ฐ Retaining wall, cofferdam แŠฅแŠ“ แ‰ฐแˆ˜แˆณแˆณแ‹ญ แ‹จ แŒแ‹ตแŒแ‹ณ แˆตแ‰ตแˆซแŠญแ‰ธแˆฎแ‰ฝ แˆˆแˆ˜แŒˆแŠ•แ‰ฃแ‰ต แˆแŠ•แŒ แ‰€แˆแ‰ฃแ‰ธแ‹ แŠฅแŠ•แ‰ฝแˆ‹แˆˆแŠ•แกแก *แ‹จแ‰ฐแ‹ˆแˆฐแАแ‹ แŠ แŠซแˆ‹แ‰ธแ‹ แˆ˜แˆฌแ‰ต แ‹แˆตแŒฅ แ‹จแˆšแ‰€แ‰ แˆจแ‹แˆ pile driving แˆ›แˆบแŠ• แ‰ แˆ˜แŒ แ‰€แˆ แАแ‹แกแก แ‰ แŠจแˆˆแˆญ แŽแ‰ถ แ‹จแˆšแ‰ณแ‹จแ‹ Larson/ U Type แ‹ญแ‰ฃแˆ‹แˆ::
โœŒแˆˆแˆแˆ‰แˆ แŠฅแŠ•แ‹ฒแ‹ณแˆจแˆต แ–แˆตแ‰ถแ‰นแŠ• SHARE แŠ แ‹ตแˆญแŒ‰แˆแŠ•แข
๐Ÿ‘‡๐Ÿ‘‡๐Ÿ‘‡๐Ÿ‘‡๐Ÿ‘‡
Join for more updates via the link below;
t.me/COTMp
๐Ÿ‘†๐Ÿ‘†๐Ÿ‘†๐Ÿ‘†๐Ÿ‘†
๐Ÿ‘1