๐ELEMENTS OF ASPHALT CONCRETE PAVEMENT
.
โก๏ธAsphalt concrete pavements also called flexible pavements are pavements built from asphalt- concrete (asphalt, coarse aggregate, filler (optional) , and fine aggregate).
They transmit loads imposed on the surface through lateral distribution of the applied loads over depth.
.
โก๏ธThe elements of an asphalt concrete pavement are:๐
.
โถ๏ธSurfacing: This is the uppermost layer of the
pavement. The primary function of the surfacing is
to provide a safe and comfortable riding surface for the traffic. It is also expected to protect the layers underneath from the effects of natural elements
(wind, rain, ice etc.) as well as the disintegrating
effects from vehicles skidding and braking on the roadway. In this regard, it should be impervious so
as to waterproof the underlying layers. In higher
types of roads, it may consist of two distinct sub
layers known as a wearing course and a base
course.
.
โถ๏ธ Base: this is the most important and normally the thickest layer of an asphalt concrete pavement on which the surfacing rests. It is the main load
spreading layer of the pavement. It bears the burden of distributing the applied surface loads in such a manner that the bearing Capacity of the subgrade is not exceeded. It should therefore be built from high quality materials capable of withstanding the applied loads on the surface. It consist of either: crushed stone or gravel, gravelly soils, decomposed rocks, sands or sand-clays stabilized with cement, lime or bitumen.
.
โถ๏ธSub-base: The sub-base is the secondary load
spreading layer of the pavement underlying the
base. It may or may not be present in a pavement
depending on the purpose for which it is to be
used. It helps to distribute the applied loads to the
subgrade. Its stresses are less than those of the
base. Therefore its materials can be of lower quality than those of the base but must always be stronger than those of the subgrade. It is usually coarse grained or granular to act as a drainage layer for passage of any moisture which falls during
construction or after construction to the highway drainage system.
.
โถ๏ธSubgrade: this is the upper layer of the natural soil over which the pavement is being built. It may be undisturbed local material exposed by excavation or soil excavated elsewhere and placed into an embankment. It is usually compacted during
construction to give added stability.
@etconp
.
โก๏ธAsphalt concrete pavements also called flexible pavements are pavements built from asphalt- concrete (asphalt, coarse aggregate, filler (optional) , and fine aggregate).
They transmit loads imposed on the surface through lateral distribution of the applied loads over depth.
.
โก๏ธThe elements of an asphalt concrete pavement are:๐
.
โถ๏ธSurfacing: This is the uppermost layer of the
pavement. The primary function of the surfacing is
to provide a safe and comfortable riding surface for the traffic. It is also expected to protect the layers underneath from the effects of natural elements
(wind, rain, ice etc.) as well as the disintegrating
effects from vehicles skidding and braking on the roadway. In this regard, it should be impervious so
as to waterproof the underlying layers. In higher
types of roads, it may consist of two distinct sub
layers known as a wearing course and a base
course.
.
โถ๏ธ Base: this is the most important and normally the thickest layer of an asphalt concrete pavement on which the surfacing rests. It is the main load
spreading layer of the pavement. It bears the burden of distributing the applied surface loads in such a manner that the bearing Capacity of the subgrade is not exceeded. It should therefore be built from high quality materials capable of withstanding the applied loads on the surface. It consist of either: crushed stone or gravel, gravelly soils, decomposed rocks, sands or sand-clays stabilized with cement, lime or bitumen.
.
โถ๏ธSub-base: The sub-base is the secondary load
spreading layer of the pavement underlying the
base. It may or may not be present in a pavement
depending on the purpose for which it is to be
used. It helps to distribute the applied loads to the
subgrade. Its stresses are less than those of the
base. Therefore its materials can be of lower quality than those of the base but must always be stronger than those of the subgrade. It is usually coarse grained or granular to act as a drainage layer for passage of any moisture which falls during
construction or after construction to the highway drainage system.
.
โถ๏ธSubgrade: this is the upper layer of the natural soil over which the pavement is being built. It may be undisturbed local material exposed by excavation or soil excavated elsewhere and placed into an embankment. It is usually compacted during
construction to give added stability.
@etconp
๐21โค5
๐What is the differences between Singly reinforced and Doubly reinforced beam sections
๐งSingly reinforced beam
โบsingly reinforced beams are beams with tension reinforcement only( reinforcement to assist concrete carry tension)
๐งDoubly reinforced beam
โบdue to different reasons, it isn't always possible to use singly reinforced beam and it becomes necessary to assist concrete to carry compression too.
โบAnd beams with both tension and compression reinforcement are called doubly reinforced beams.
๐ซDoubly reinforced beams are advantageous over singly reinforced beams for the following reasons :
*Reduces sustained deflection( long term deflection)
* Increases ductility
* Enhances tension mode of failure
* Decreased depth of section, leading to astetics
@etconp
๐งSingly reinforced beam
โบsingly reinforced beams are beams with tension reinforcement only( reinforcement to assist concrete carry tension)
๐งDoubly reinforced beam
โบdue to different reasons, it isn't always possible to use singly reinforced beam and it becomes necessary to assist concrete to carry compression too.
โบAnd beams with both tension and compression reinforcement are called doubly reinforced beams.
๐ซDoubly reinforced beams are advantageous over singly reinforced beams for the following reasons :
*Reduces sustained deflection( long term deflection)
* Increases ductility
* Enhances tension mode of failure
* Decreased depth of section, leading to astetics
@etconp
๐21โค5๐2๐2
Expansion of soil under shear is called
Anonymous Quiz
24%
A: liquefaction
31%
B: volumetric deformation
29%
C: critical expansion
16%
D: dilatancy
๐34โค1๐1
The corresponding lateral earth pressure
when the retaining wall moves towards backfill
is known as
when the retaining wall moves towards backfill
is known as
Anonymous Quiz
53%
A: Passive Earth Pressure
35%
B: Active Earth Pressure
10%
C: Earth Pressure at rest
3%
D: None of the above
๐15๐2โค1
The determination of ultimate bearing
capacity on an eccentrically loaded square
footing depends upon the concept of useful:
capacity on an eccentrically loaded square
footing depends upon the concept of useful:
Anonymous Quiz
37%
A: Square
36%
B: Width
17%
C: Circle
10%
D: Triangle
๐20โค2
If the lateral pressure on a retaining wall
is high, the following measure are taken while
designing:
is high, the following measure are taken while
designing:
Anonymous Quiz
45%
A: Wall thickness is increased to resist the moment at base
12%
B: Slab thickness is increased to resist the moment
13%
C: Height of the retaining wall to be increased to increase the moment resisting capacity
30%
D: Shear key is provided to resist the lateral pressure
โค11๐6
๐Pan-United แจแฐแฃแ แจแฒแแแแญ แฎแแญแชแต แ แแซแฝ แฉแฃแแซ แ แคแแญแตแชแญ แแญแ แจแแแแณแแต แจแญแแต แซแแฎแ แ แฅแซ แแญ แแแ แฐแฐแแทแแข
๐ทแซแแแแ แ แแแแซแ แ แคแแญแตแชแญ แจแแแแณแแฑ แจแฎแแญแชแต แแญแฐแญ แซแแฎแแฝแ แแ แแ แจแแแจแ แ แแณแ แแญแ แจแแแแณแแฑ แจแฎแแญแชแต แแญแฐแญ แซแแฎแแฝ แแฐ แจแฃแข แ แจแญ แจแแแแแแ แจแฐแแ แ แ แจแญ แแแตแแจแต แฅแแฒแแ แจแตแแฝ แฅแญแแตแ แแแแฃแ แญ แญแแญ แ แแฐแฅ แแแข
๐ซแจแตแแฝ แฅแญแแต แ แฃแ แฅแ แฅแ แฅแ แ แแแแ แจแฒแแแแญ แแแฅ แแณแ แ แแแฅแแขแฃ แฅแซแ แจแแ แฐแแฃแฅแทแแข
โญ๏ธแจแฎแแญแชแต แซแแฎแแ แจแแแฃแ SANY แจแฐแฃแ แจแปแญแ แณแแ แจแฎแแญแชแต แซแแฎแ แ แแซแฝ แฉแฃแแซ แฒแแแฃ แแชแแ แ แแ แแแแต แแ แปแญแ แ แแตแจแ แฅแป แแแ แแ แ แ แฅแแข แแแณ แฅแซแแ แแจแแแ แฅแแฐแแฝแ แฐแ แ แทแแข
@etconp
๐ทแซแแแแ แ แแแแซแ แ แคแแญแตแชแญ แจแแแแณแแฑ แจแฎแแญแชแต แแญแฐแญ แซแแฎแแฝแ แแ แแ แจแแแจแ แ แแณแ แแญแ แจแแแแณแแฑ แจแฎแแญแชแต แแญแฐแญ แซแแฎแแฝ แแฐ แจแฃแข แ แจแญ แจแแแแแแ แจแฐแแ แ แ แจแญ แแแตแแจแต แฅแแฒแแ แจแตแแฝ แฅแญแแตแ แแแแฃแ แญ แญแแญ แ แแฐแฅ แแแข
๐ซแจแตแแฝ แฅแญแแต แ แฃแ แฅแ แฅแ แฅแ แ แแแแ แจแฒแแแแญ แแแฅ แแณแ แ แแแฅแแขแฃ แฅแซแ แจแแ แฐแแฃแฅแทแแข
โญ๏ธแจแฎแแญแชแต แซแแฎแแ แจแแแฃแ SANY แจแฐแฃแ แจแปแญแ แณแแ แจแฎแแญแชแต แซแแฎแ แ แแซแฝ แฉแฃแแซ แฒแแแฃ แแชแแ แ แแ แแแแต แแ แปแญแ แ แแตแจแ แฅแป แแแ แแ แ แ แฅแแข แแแณ แฅแซแแ แแจแแแ แฅแแฐแแฝแ แฐแ แ แทแแข
@etconp
๐20
Intercon Construction Chemicals
๐ Authorized agent of MC (Conmix), Weber and SIMENTEK
โ Concrete Admixtures
โ Bonding Agents
โ Waterproofings
โ Concrete Repair, Grout
โ Tile Adhesive & Tile Joint Fillers
โ Wall Putty, Prime Coat, Rush Coat
โ Quartz, Contextra
โ Specialized paints (Thermal and Insulation Paints, Street and Playground Paints)
โ Floor hardener, Epoxy
โ Geotextiles, Geo-membranes and other construction chemicals and materials
Tel: 0961955555 or 0961955559
Address: Signal, around signal mall
๐ Authorized agent of MC (Conmix), Weber and SIMENTEK
โ Concrete Admixtures
โ Bonding Agents
โ Waterproofings
โ Concrete Repair, Grout
โ Tile Adhesive & Tile Joint Fillers
โ Wall Putty, Prime Coat, Rush Coat
โ Quartz, Contextra
โ Specialized paints (Thermal and Insulation Paints, Street and Playground Paints)
โ Floor hardener, Epoxy
โ Geotextiles, Geo-membranes and other construction chemicals and materials
Tel: 0961955555 or 0961955559
Address: Signal, around signal mall
๐3โค2
#ADVERTISEMENT
๐Do You Want
๐ซCivil 3D full tutorials video including Project
๐ทAll materials used for during the video
โบGirder bridge working drawing including all materials used during the video and Girder bridge 3D model in SketchUp
โบWe can help you by Highway design
โบTemplate production
โบEarthwork and pavement quantity preparation
Structural Working drawing preparation
โบAll this will be done in a Precision and Exceptional way with in short time period
๐ซYou Can Follow Us By the Following Social Medias
YouTube: http://www.youtube.com/@musfide
Web site:- www.musfide.com
Telegram:- https://t.me/musafide
Linkden:- https://www.linkedin.com/in/musfide
Or You Can Call +251905666664 ๐
๐Do You Want
๐ซCivil 3D full tutorials video including Project
๐ทAll materials used for during the video
โบGirder bridge working drawing including all materials used during the video and Girder bridge 3D model in SketchUp
โบWe can help you by Highway design
โบTemplate production
โบEarthwork and pavement quantity preparation
Structural Working drawing preparation
โบAll this will be done in a Precision and Exceptional way with in short time period
๐ซYou Can Follow Us By the Following Social Medias
YouTube: http://www.youtube.com/@musfide
Web site:- www.musfide.com
Telegram:- https://t.me/musafide
Linkden:- https://www.linkedin.com/in/musfide
Or You Can Call +251905666664 ๐
๐4
๐How is a reinforcement bar in hardened concrete structure exposed to corrosion?
๐ซแแ แ แแ แฅแแซแฌแแ แซแแ แจ แฎแแญแชแต แตแตแซแญแธแญ แแตแฅ แซแ แแญแ แจแฐแฐแซแ แต reinforcement bar แฅแแดแต แแแ แญแฝแแ? แ แแ แแญแแซแถแฝแต แแแ แญแฝแแ?
๐ท3 แแฐแจแณแ แจแแ แแแณแแฝ reinforcement แฃแซแฝแแ แ แ แ แแแณ แฅแแซแฌแแ แฃแแ แจ แ แญแแณ แตแตแซแญแธแญ แแตแฅ แฃแแ แต แแซแแแต แญแฝแแ (corrosion แฅแแฒแแ แญ แแซแฐแญแแต แญแฝแแ)
โญ๏ธ1. แจแแแแชแซแ carbonation แญแฃแแ
โบแฅแแฐแแณแแแ concrete strongly alkaline nature แ แแแข แญแ แ แจแแแ แต แแญแแซแต Ca(OH)2 แตแแแแข
โบpH value แฐแแ about 13 แแแข
โถ๏ธdue to this high alkalinity nature แฎแแญแชแฑ reinforcement แฃแฉแ แจ corrosion แแแจแแจแ a thin passivating layer แ แฃแฉ แแชแซ แ แแแ แญ แฅแจแฑแ แจแแแต แญแจแแจแแแข แญแ แ process passivation แ แแฃแ แญแณแแแแข
โถ๏ธAs we know CO2 แ แซแฑ reactive แ แญแฐแแแข แแ in the presence of moisture( แฅแญแฅแ แต) แแฐ dilute carbonic acid แญแแจแซแแข แจแแ concrete form แซแฐแจแแแ passivating layer แแฅแแต แแญแ แแแซแจแต แญแแแซแแข แ แแจแจแปแ PH value แ แแฐ 8.3 - 9 แซแฐแญแฐแแแข แแญ PH value แจ 11 แแแต แฒแแแญ แฅแจแฑ แ แแแ แแแ แญแแแซแแข
๐ท2. แแแฐแแ แฐแแ chloride attack แแ
โบแ แฐแแณแณแญ แแแแต แแญ carbonation passivating layer แ แแแซแจแต แฅแแฐแแฝแ chloride attack แ แซแแ แ แ แแ แแตแจแ แญแฝแแแข
โถ๏ธchloride attack is more serious reason than any other
โถ๏ธin the presence of water and oxygen, chloride can destroy the passivating layer and leads to corrosion.
โถ๏ธchloride แ แแแ แแฐ แฎแแญแชแฑ แแแฃ แญแฝแแแข
โก๏ธแแแณแ แ cement,water,aggregate and sometimes from admixtures or from environment by diffusion.
๐ท3. แถแตแฐแแ แ electrochemical process แแ
โบแญแแแ แฐแแ when there is a difference in electrical potential along the steel reinforcement in concrete.
โบแฅแจแฑ แแตแฅ แ แแฐแแ part anode แแแแ part แฐแแ cathode แฒแแ แแแข
@etconp
๐ซแแ แ แแ แฅแแซแฌแแ แซแแ แจ แฎแแญแชแต แตแตแซแญแธแญ แแตแฅ แซแ แแญแ แจแฐแฐแซแ แต reinforcement bar แฅแแดแต แแแ แญแฝแแ? แ แแ แแญแแซแถแฝแต แแแ แญแฝแแ?
๐ท3 แแฐแจแณแ แจแแ แแแณแแฝ reinforcement แฃแซแฝแแ แ แ แ แแแณ แฅแแซแฌแแ แฃแแ แจ แ แญแแณ แตแตแซแญแธแญ แแตแฅ แฃแแ แต แแซแแแต แญแฝแแ (corrosion แฅแแฒแแ แญ แแซแฐแญแแต แญแฝแแ)
โญ๏ธ1. แจแแแแชแซแ carbonation แญแฃแแ
โบแฅแแฐแแณแแแ concrete strongly alkaline nature แ แแแข แญแ แ แจแแแ แต แแญแแซแต Ca(OH)2 แตแแแแข
โบpH value แฐแแ about 13 แแแข
โถ๏ธdue to this high alkalinity nature แฎแแญแชแฑ reinforcement แฃแฉแ แจ corrosion แแแจแแจแ a thin passivating layer แ แฃแฉ แแชแซ แ แแแ แญ แฅแจแฑแ แจแแแต แญแจแแจแแแข แญแ แ process passivation แ แแฃแ แญแณแแแแข
โถ๏ธAs we know CO2 แ แซแฑ reactive แ แญแฐแแแข แแ in the presence of moisture( แฅแญแฅแ แต) แแฐ dilute carbonic acid แญแแจแซแแข แจแแ concrete form แซแฐแจแแแ passivating layer แแฅแแต แแญแ แแแซแจแต แญแแแซแแข แ แแจแจแปแ PH value แ แแฐ 8.3 - 9 แซแฐแญแฐแแแข แแญ PH value แจ 11 แแแต แฒแแแญ แฅแจแฑ แ แแแ แแแ แญแแแซแแข
๐ท2. แแแฐแแ แฐแแ chloride attack แแ
โบแ แฐแแณแณแญ แแแแต แแญ carbonation passivating layer แ แแแซแจแต แฅแแฐแแฝแ chloride attack แ แซแแ แ แ แแ แแตแจแ แญแฝแแแข
โถ๏ธchloride attack is more serious reason than any other
โถ๏ธin the presence of water and oxygen, chloride can destroy the passivating layer and leads to corrosion.
โถ๏ธchloride แ แแแ แแฐ แฎแแญแชแฑ แแแฃ แญแฝแแแข
โก๏ธแแแณแ แ cement,water,aggregate and sometimes from admixtures or from environment by diffusion.
๐ท3. แถแตแฐแแ แ electrochemical process แแ
โบแญแแแ แฐแแ when there is a difference in electrical potential along the steel reinforcement in concrete.
โบแฅแจแฑ แแตแฅ แ แแฐแแ part anode แแแแ part แฐแแ cathode แฒแแ แแแข
@etconp
๐17โค2
๐แ แจแฐแแฝแ แซแแแ แจแแแชแซ แคแต แฝแแญ แแแ
แจแ แ แแแแตแตแ แจแแ แแญแ แ แแญแแต แจแแแซแแณแธแ แจแคแต แแแฃแณ แแญแ แแฅแญ แตแแ แจแแแ แจแฆแชแต แแแ แแซ แณแญแต 60 แบแ แคแถแฝ แแแฃแณแฃ แ แแแแญ แแแต แชแแตแดแต แจแแแแฃแธแ 4,370 แคแถแฝ แจแแแฃแณ แแฐแตแ แฅแแฒแแ แ แฆแ แฉแแแณ แ แแ แแญแ แฅแจแแ แจแแแ แแแแ แจแแแชแซ แคแถแฝ แแแฃแณแ แแฅแแฐแแ::
แ แแแซแแณแธแ แจแแแต แตแซแแฝ แ แตแแซ แแแแต แฐแแบแแฝ แ แแแต แ แแแญแแ แ แฐแซแญ แแฐแจแต แจแฆแชแต แแแ แแซ แณแญแต แแแแต แฐแแบ แ แญแถแ แฐแฎแฝ แจแแแ 770 แฐแจแแธแแ แจแ แ แ แแตแญ แคแถแฝแ แ แตแแซ แฐแฅแฐแ แแแฃแณแธแแ แ แแแ แ แแญ แฅแแแแแ::
แ แแ แจแแแ แแซ แแฎแแญแต แจแแแแก แคแถแฝ แแตแฅ แฎแแถแแแจแ แ แแแ แฅ แแญ แจแแแ แแแชแแฝ แฐแ แแ แจแแแแ แตแ แแแแต แ แแแปแธแต แแญ แจแแแแ แฒแแ แ แจแฐแแฝแ แซแแแ แจแแแชแซ แคแต แฅแฅแจแต แแแ แจแ แจแแ แแญแ แแญ แ แแฐแฃแ แญ แจแแแญแแธแ แตแซแแฝแ แจแแฐแจแฐแแแตแ แจแแญแแแต แแญ แฐแซแญแ แจแแซแแฅแ แฝแแฎแฝแ แ แแ แจแ แ แฐแซแแแธแ แแ แแแ แแแ แตแฉแจแต แฐแฅแฐแ แจแแแฐแซ แญแแแ::
Via แ แณแแฝ แ แคแค
@etconp
แ แแแซแแณแธแ แจแแแต แตแซแแฝ แ แตแแซ แแแแต แฐแแบแแฝ แ แแแต แ แแแญแแ แ แฐแซแญ แแฐแจแต แจแฆแชแต แแแ แแซ แณแญแต แแแแต แฐแแบ แ แญแถแ แฐแฎแฝ แจแแแ 770 แฐแจแแธแแ แจแ แ แ แแตแญ แคแถแฝแ แ แตแแซ แฐแฅแฐแ แแแฃแณแธแแ แ แแแ แ แแญ แฅแแแแแ::
แ แแ แจแแแ แแซ แแฎแแญแต แจแแแแก แคแถแฝ แแตแฅ แฎแแถแแแจแ แ แแแ แฅ แแญ แจแแแ แแแชแแฝ แฐแ แแ แจแแแแ แตแ แแแแต แ แแแปแธแต แแญ แจแแแแ แฒแแ แ แจแฐแแฝแ แซแแแ แจแแแชแซ แคแต แฅแฅแจแต แแแ แจแ แจแแ แแญแ แแญ แ แแฐแฃแ แญ แจแแแญแแธแ แตแซแแฝแ แจแแฐแจแฐแแแตแ แจแแญแแแต แแญ แฐแซแญแ แจแแซแแฅแ แฝแแฎแฝแ แ แแ แจแ แ แฐแซแแแธแ แแ แแแ แแแ แตแฉแจแต แฐแฅแฐแ แจแแแฐแซ แญแแแ::
Via แ แณแแฝ แ แคแค
@etconp
๐12
#ADVERTISEMENTS
๐แแฉ แจ Interior Design แฅแ Software แตแแ แ แจแฐแญแฐแแฌแต แแญ
๐ 0984121839
๐แจแแณ
แฐแ - แฅแแต (แจ11:30-1:30)
๐แจแ แณแ แฅแ แฅแแต
แ แณแ แ แแต 3:00 - 6:00 แฃ แจแฐแแต 7:30-10:30
แฅแแต แ แแต 3:00 - 6:00 แฃ แจแฐแแต 7:30-10:30
โ แแแต แฃแแธแ แจแฉแแจแญแฒแฒ แแแ แซแ แ แ แญแญแดแญแถแฝ แจแแฐแฅ แแฉ แตแแ แแข
โ แญแ Course แตแ Interior Design, แแแ แซแแฆแตแ แแแแ แแฐแจแณแ แแแฎแฝ แจแแซแซแตแต แแ
โณ๏ธ แจแฎแญแฑ แแญแแฎแฝ
โ Fundamental of Interior Design
โ Archicad 3D For Interior Design
โ Rendering in Lumion
โณ๏ธ แ แฐแแฃแฃแ แแ 15, 000 ETB แ3 แแญ!
๐ 0984121839
๐ฅ
Telegram:- https://t.me/archidemyy
๐แแฉ แจ Interior Design แฅแ Software แตแแ แ แจแฐแญแฐแแฌแต แแญ
๐ 0984121839
๐แจแแณ
แฐแ - แฅแแต (แจ11:30-1:30)
๐แจแ แณแ แฅแ แฅแแต
แ แณแ แ แแต 3:00 - 6:00 แฃ แจแฐแแต 7:30-10:30
แฅแแต แ แแต 3:00 - 6:00 แฃ แจแฐแแต 7:30-10:30
โ แแแต แฃแแธแ แจแฉแแจแญแฒแฒ แแแ แซแ แ แ แญแญแดแญแถแฝ แจแแฐแฅ แแฉ แตแแ แแข
โ แญแ Course แตแ Interior Design, แแแ แซแแฆแตแ แแแแ แแฐแจแณแ แแแฎแฝ แจแแซแซแตแต แแ
โณ๏ธ แจแฎแญแฑ แแญแแฎแฝ
โ Fundamental of Interior Design
โ Archicad 3D For Interior Design
โ Rendering in Lumion
โณ๏ธ แ แฐแแฃแฃแ แแ 15, 000 ETB แ3 แแญ!
๐ 0984121839
๐ฅ
Telegram:- https://t.me/archidemyy
๐9โค1
๐Slump Size and Usage with Strength of Concrete Marks
๐ซSlump Test is used to measure the workability or consistency of fresh concrete.
๐งThe slump size varies based on the type of construction work and the strength of the concrete mix. Below is a summary:
โญ๏ธ1. Low Slump (0-25 mm)
โบUsage:
High-strength concrete (40 MPa or above).
Foundations, retaining walls, and other structural elements requiring low workability.
Strength of Mark: Used for grades like M40, M45, or higher.
โถ๏ธPurpose: Suitable for structures that require compacted concrete with minimal voids.
โญ๏ธ2. Medium Slump (25-75 mm)
โบUsage:
Ordinary reinforced concrete works such as beams, slabs, and columns.
Strength of Mark: Used for grades like M25, M30.
โถ๏ธPurpose: Offers a balance between workability and strength, making it ideal for most structural applications.
โญ๏ธ3. High Slump (75-125 mm)
โบUsage:
Structures with dense reinforcement, pavements, and pre-stressed concrete.
Strength of Mark: Used for grades like M20 or M25.
โถ๏ธPurpose: Provides higher workability for easy placement without compromising strength.
โญ๏ธ4. Very High Slump (>125 mm)
โบUsage:
Pumped concrete, mass concrete works, and flowing concrete applications.
Strength of Mark: Generally used for lower grades like M15, M20.
โถ๏ธPurpose: Enhances flowability for ease of placement, especially in complex structures.
โ๏ธKey Notes:
๐ฐHigher Slump: Indicates greater workability but can reduce strength if not proportioned correctly.
๐ฐLower Slump: Indicates stiffer concrete, generally leading to higher strength but harder to work with.
@etconp
๐ซSlump Test is used to measure the workability or consistency of fresh concrete.
๐งThe slump size varies based on the type of construction work and the strength of the concrete mix. Below is a summary:
โญ๏ธ1. Low Slump (0-25 mm)
โบUsage:
High-strength concrete (40 MPa or above).
Foundations, retaining walls, and other structural elements requiring low workability.
Strength of Mark: Used for grades like M40, M45, or higher.
โถ๏ธPurpose: Suitable for structures that require compacted concrete with minimal voids.
โญ๏ธ2. Medium Slump (25-75 mm)
โบUsage:
Ordinary reinforced concrete works such as beams, slabs, and columns.
Strength of Mark: Used for grades like M25, M30.
โถ๏ธPurpose: Offers a balance between workability and strength, making it ideal for most structural applications.
โญ๏ธ3. High Slump (75-125 mm)
โบUsage:
Structures with dense reinforcement, pavements, and pre-stressed concrete.
Strength of Mark: Used for grades like M20 or M25.
โถ๏ธPurpose: Provides higher workability for easy placement without compromising strength.
โญ๏ธ4. Very High Slump (>125 mm)
โบUsage:
Pumped concrete, mass concrete works, and flowing concrete applications.
Strength of Mark: Generally used for lower grades like M15, M20.
โถ๏ธPurpose: Enhances flowability for ease of placement, especially in complex structures.
โ๏ธKey Notes:
๐ฐHigher Slump: Indicates greater workability but can reduce strength if not proportioned correctly.
๐ฐLower Slump: Indicates stiffer concrete, generally leading to higher strength but harder to work with.
@etconp
๐17โค1
๐African Development Bank renews and expands agreement to use FIDIC standard contracts for a further five years
๐ทFIDIC has renewed and expanded a major agreement with the African Development Bank Group that will now see the multilateral development bank employ ten FIDIC standard contracts for the next five years. The bank is the leading source for development financing in Africa and is committed to supporting inclusive and sustainable growth and good governance across the continent.
๐Under the terms of the agreement, FIDIC has granted the bank a non-exclusive license to refer to ten major FIDIC contracts for projects they finance and the documents will be used in the bankโs main standard bidding documents. The list of contracts now includes reprints of the 2022 FIDIC Rainbow Suite, the latest FIDIC Green Book 2021 and the reprint of Emerald Book 2023 contract for Underground Works and the Dredgers contract 2016.
โบThe suite of contracts covered by the agreement with FIDIC covers a wide range of international construction and infrastructure work.
โบThe Bankโs initiative represents a further key endorsement for FIDIC contracts from a major international funding organisation, following similar agreements signed with the World Bank and many other multilateral development banks around the world.
๐ซFIDIC president Catherine Karakatsanis MESc PEng FCAE ICD.D LL.D D.Eng said: โI am delighted that the AfDB has renewed and expanded its agreement with FIDIC to be used as an accepted form of contract for use with their standard bidding documents. As well as this being another major development for FIDIC, we hope that this move will create more certainty in the market, as by facilitating the use of FIDIC contacts on major projects the AfDB is saying that they endorse the fair and balanced approach that these documents offer to parties on major construction contracts.
โWe know that the certainty FIDIC contracts bring makes it easier to get projects underway, as many of the common commercial risks are clearly addressed in the contracts and all parties understand their obligations and responsibilities. FIDIC looks forward to the AfDBโs continuing endorsement of these contracts providing additional reassurance to the financial, institutional and private equity investors operating in the global market to adopt the use of FIDIC standard procurement contracts as an effective tool to mitigate the risks associated with major infrastructure projects and assets.โ
โบCommenting on the signing of the agreement, Frank Mvula, director, fiduciary and inspection department at the African Development Bank, said: โWe are glad to have concluded this agreement that will enable us to incorporate FIDIC contracts in our main standard bidding documents.
โบThere is no doubt that the use of the internationally recognised FIDIC contracts is a step towards enhancing equity and economy, as well as efficient and effective contract management, as emphasised under the bankโs procurement framework. We look forward to working with FIDIC for another five years.โ
@etconp
๐ทFIDIC has renewed and expanded a major agreement with the African Development Bank Group that will now see the multilateral development bank employ ten FIDIC standard contracts for the next five years. The bank is the leading source for development financing in Africa and is committed to supporting inclusive and sustainable growth and good governance across the continent.
๐Under the terms of the agreement, FIDIC has granted the bank a non-exclusive license to refer to ten major FIDIC contracts for projects they finance and the documents will be used in the bankโs main standard bidding documents. The list of contracts now includes reprints of the 2022 FIDIC Rainbow Suite, the latest FIDIC Green Book 2021 and the reprint of Emerald Book 2023 contract for Underground Works and the Dredgers contract 2016.
โบThe suite of contracts covered by the agreement with FIDIC covers a wide range of international construction and infrastructure work.
โบThe Bankโs initiative represents a further key endorsement for FIDIC contracts from a major international funding organisation, following similar agreements signed with the World Bank and many other multilateral development banks around the world.
๐ซFIDIC president Catherine Karakatsanis MESc PEng FCAE ICD.D LL.D D.Eng said: โI am delighted that the AfDB has renewed and expanded its agreement with FIDIC to be used as an accepted form of contract for use with their standard bidding documents. As well as this being another major development for FIDIC, we hope that this move will create more certainty in the market, as by facilitating the use of FIDIC contacts on major projects the AfDB is saying that they endorse the fair and balanced approach that these documents offer to parties on major construction contracts.
โWe know that the certainty FIDIC contracts bring makes it easier to get projects underway, as many of the common commercial risks are clearly addressed in the contracts and all parties understand their obligations and responsibilities. FIDIC looks forward to the AfDBโs continuing endorsement of these contracts providing additional reassurance to the financial, institutional and private equity investors operating in the global market to adopt the use of FIDIC standard procurement contracts as an effective tool to mitigate the risks associated with major infrastructure projects and assets.โ
โบCommenting on the signing of the agreement, Frank Mvula, director, fiduciary and inspection department at the African Development Bank, said: โWe are glad to have concluded this agreement that will enable us to incorporate FIDIC contracts in our main standard bidding documents.
โบThere is no doubt that the use of the internationally recognised FIDIC contracts is a step towards enhancing equity and economy, as well as efficient and effective contract management, as emphasised under the bankโs procurement framework. We look forward to working with FIDIC for another five years.โ
@etconp
๐7โค2
แณแแซแต แแแต แฅแ แแฆแแต แ แ
แซแข
๐แแแ แ แ แแต แฆแณ แจแแซแแแ แต แฅแ แแแแ แ แญแฅ
๐ฐแแ แญแแแแ?
๐แแแตแ แแฆแแต แ แแแแต แ แญแแต แจแฐแแแ แ แแ
โ๏ธแแแซ แแตแแซแจแฅ แแตแ แณแต แแญแแ แแณแ แ แจแแแ แฅแแณแซแตแก แแแแ แแฝแแฝ แ แตแแฅแฐแแ
๐แแฎ (แถแแฒแ) แฅแญแต แแตแ แแต แแญแแ แแณแ แ แซแฐแก แแฑแ แแฝแ แ แแฝแ แแ
๐แแแแแแ แจแแฐแแญ แตแซแแฝแ แจแแฐแฉ แฅแ แฃแแแซแแฝแ แ แแ
โ๏ธแญแฐแแแแ แซแแญแฉแ
๐แขแตแฎแตแซ แแตแฅ แจแตแ แฅแแแญแแณแแ
แ แตแซแปแฝแแฆ 1. แแญแซแถ
แ.1 แ แจแญ แคแ
แ.3 แฐแญแแแญแแแต
0904040477
0911016833
๐แแแ แ แ แแต แฆแณ แจแแซแแแ แต แฅแ แแแแ แ แญแฅ
๐ฐแแ แญแแแแ?
๐แแแตแ แแฆแแต แ แแแแต แ แญแแต แจแฐแแแ แ แแ
โ๏ธแแแซ แแตแแซแจแฅ แแตแ แณแต แแญแแ แแณแ แ แจแแแ แฅแแณแซแตแก แแแแ แแฝแแฝ แ แตแแฅแฐแแ
๐แแฎ (แถแแฒแ) แฅแญแต แแตแ แแต แแญแแ แแณแ แ แซแฐแก แแฑแ แแฝแ แ แแฝแ แแ
๐แแแแแแ แจแแฐแแญ แตแซแแฝแ แจแแฐแฉ แฅแ แฃแแแซแแฝแ แ แแ
โ๏ธแญแฐแแแแ แซแแญแฉแ
๐แขแตแฎแตแซ แแตแฅ แจแตแ แฅแแแญแแณแแ
แ แตแซแปแฝแแฆ 1. แแญแซแถ
แ.1 แ แจแญ แคแ
แ.3 แฐแญแแแญแแแต
0904040477
0911016833
๐6โค1
๐แแแแ แแแต แขแฎ แ แขแแฌแฝแแ แดแญแแแ แแแต แขแฎ แซแตแแแแ แ แฒแต แตแจแแฝ แ แแจแซแจแฅ แแฐ แตแซ แ แตแแฃ!
๐ทแขแฎแ www.aapdb.gov.et แจแฐแฐแ แจแจแฐแแแ แจแแแแตแซแแฃ แแ แ แซแแ แแฃแ แแฅแณแ แแแ แฅแแฒแแ แจแฐแแซแฉ แจแฅแแตแ แแญแแญ แแคแถแฝแ แแจแ แฐแฐแซแฝ แแแตแจแแฃ แแแตแฐแแแ แ แจแฐแแแ แ แแแแ แแแ แแแซแต แจแแซแตแฝแ แฐแจแแแ แจแ แ แ แตแจแแฝ แ แแตแแแต แ แแฌแ แฅแแต แ แญแ แ แแจแซแจแฅ แแฐ แตแซ แ แตแแฅแทแแกแก
แ แขแฎแ แจแจแฐแ แฅแแตแคแแจแแ แ แ แ แแแฃแณ แแญแ แแญแตแ แขแฎ แแแ แ แถ แแณแธแ แแญแ แฅแแฐแฐแแแฉแต แแจแฐแแ แแแชแแฝ แฅแป แณแญแแ แแ แแแ แแ แแ แ แจแฐแฅ แฃแแ แต แแแ แจแขแฎแแ แแฉ แแฉ แแจแแแฝ แแแแต แจแแซแตแฝแแ แจแแแ แตแแ แซแ แ แแแแ แ แตแฐแซแจแถแฝแ แฅแแ แแตแ แต แจแแซแตแฝแ แแฅแณแญแต แ แตแแแฐแ แญแญแญแฅ แแแแแ แฐแแแจแแแกแก
แ แถ แแณแธแ แจแจแฐแแ แขแแฌแฝแแ แดแญแแแ แแแต แขแฎ แจแแแแ แแแต แขแฎ แแแแ แดแญแแแแแฝแ แ แแ แแ แ แแแแแต แฅแแฒแฐแฅ แจแฐแแแต แแญแ แจแแซแตแฐแณแตแญ แฒแตแฐแ แ แฐแจแแชแแต แ แแแแต แฐแแแ แตแฅแฅแฉแ แฅแซแแแ แฐ แแแแ แ แตแแแแ แแแกแก
แจแขแแฌแฝแแ แดแญแแแ แแแต แขแฎ แฝ/แคแต แแแ แ แถ แแฉแ แ แฅแฐแ แ แ แฉแแธแ แจแจแฐแแ แตแแญแต แฒแฒ แตแแ แซ แจแแตแแ แแแแ แดแญแแแแแฝแ แ แแแแต แจแจแฐแแแ แฒแแแแฒแญ แแแจแแแตแฃ แแแแแ แฐแแณแณแชแแตแ แฐแแซแญแแต แฅแซแณแฐแแ แฅแแแแแ แฒแ แ แญแญแญแก แแ แต แฐแแแจแแแกแก
แ แญแญแญแฅ แฅแ แตแญแแฑ แแญ แจแ แฒแต แ แ แฃ แจแฐแ แ แตแฐแณแฐแญ แแแแ แแแต แขแฎ แแญแตแ แขแฎ แแแ แ แถ แแณแธแ แแญแแฃ แจแแแแ แแแต แขแฎ แฝ/แคแต แแแ แ แถ แฒแณแญ แฐแจแแฃ แจแขแแฌแฝแแ แดแญแแแ แแแต แขแฎ แฝ/แคแต แแแ แ แถ แแฉแ แ แฅแฐแแฃ แจแแแฑแ แฐแแแต แณแญแฌแญแถแฌแต แณแญแฌแญแฐแฎแฝ แฐแแแฐแแแข
แญแ แตแจแแฝ แฐแจแแแ แ แ แ แ แแแฉ แ แถแตแต แแแแแฝ แจแฐแแฃแฆแตแ แจแ แแฅ แแแแแต แตแซ แ แแตแซแต แจแจแฐแแแ แจแแแต แแคแถแฝแฃ แณแแแ แแฎแแญแต แแคแถแฝแฃ แจแฎแชแฐแญ แแแถแฝแฃ แจแ แซแฃแข แแแตแ แจแแฐแจแฐ แแแต แแแ แตแซแแฝ แ แแตแฐแแแ แ แแ แณ แ แแแแฃแต แจแแต แจแ แซแ แ แ แญแญแถ แซแฐแญแแ แฐแฅแ แญแ แ แแแข
Via Addis Ababa City Plan and Development Bureaucracy
@etconp
๐ทแขแฎแ www.aapdb.gov.et แจแฐแฐแ แจแจแฐแแแ แจแแแแตแซแแฃ แแ แ แซแแ แแฃแ แแฅแณแ แแแ แฅแแฒแแ แจแฐแแซแฉ แจแฅแแตแ แแญแแญ แแคแถแฝแ แแจแ แฐแฐแซแฝ แแแตแจแแฃ แแแตแฐแแแ แ แจแฐแแแ แ แแแแ แแแ แแแซแต แจแแซแตแฝแ แฐแจแแแ แจแ แ แ แตแจแแฝ แ แแตแแแต แ แแฌแ แฅแแต แ แญแ แ แแจแซแจแฅ แแฐ แตแซ แ แตแแฅแทแแกแก
แ แขแฎแ แจแจแฐแ แฅแแตแคแแจแแ แ แ แ แแแฃแณ แแญแ แแญแตแ แขแฎ แแแ แ แถ แแณแธแ แแญแ แฅแแฐแฐแแแฉแต แแจแฐแแ แแแชแแฝ แฅแป แณแญแแ แแ แแแ แแ แแ แ แจแฐแฅ แฃแแ แต แแแ แจแขแฎแแ แแฉ แแฉ แแจแแแฝ แแแแต แจแแซแตแฝแแ แจแแแ แตแแ แซแ แ แแแแ แ แตแฐแซแจแถแฝแ แฅแแ แแตแ แต แจแแซแตแฝแ แแฅแณแญแต แ แตแแแฐแ แญแญแญแฅ แแแแแ แฐแแแจแแแกแก
แ แถ แแณแธแ แจแจแฐแแ แขแแฌแฝแแ แดแญแแแ แแแต แขแฎ แจแแแแ แแแต แขแฎ แแแแ แดแญแแแแแฝแ แ แแ แแ แ แแแแแต แฅแแฒแฐแฅ แจแฐแแแต แแญแ แจแแซแตแฐแณแตแญ แฒแตแฐแ แ แฐแจแแชแแต แ แแแแต แฐแแแ แตแฅแฅแฉแ แฅแซแแแ แฐ แแแแ แ แตแแแแ แแแกแก
แจแขแแฌแฝแแ แดแญแแแ แแแต แขแฎ แฝ/แคแต แแแ แ แถ แแฉแ แ แฅแฐแ แ แ แฉแแธแ แจแจแฐแแ แตแแญแต แฒแฒ แตแแ แซ แจแแตแแ แแแแ แดแญแแแแแฝแ แ แแแแต แจแจแฐแแแ แฒแแแแฒแญ แแแจแแแตแฃ แแแแแ แฐแแณแณแชแแตแ แฐแแซแญแแต แฅแซแณแฐแแ แฅแแแแแ แฒแ แ แญแญแญแก แแ แต แฐแแแจแแแกแก
แ แญแญแญแฅ แฅแ แตแญแแฑ แแญ แจแ แฒแต แ แ แฃ แจแฐแ แ แตแฐแณแฐแญ แแแแ แแแต แขแฎ แแญแตแ แขแฎ แแแ แ แถ แแณแธแ แแญแแฃ แจแแแแ แแแต แขแฎ แฝ/แคแต แแแ แ แถ แฒแณแญ แฐแจแแฃ แจแขแแฌแฝแแ แดแญแแแ แแแต แขแฎ แฝ/แคแต แแแ แ แถ แแฉแ แ แฅแฐแแฃ แจแแแฑแ แฐแแแต แณแญแฌแญแถแฌแต แณแญแฌแญแฐแฎแฝ แฐแแแฐแแแข
แญแ แตแจแแฝ แฐแจแแแ แ แ แ แ แแแฉ แ แถแตแต แแแแแฝ แจแฐแแฃแฆแตแ แจแ แแฅ แแแแแต แตแซ แ แแตแซแต แจแจแฐแแแ แจแแแต แแคแถแฝแฃ แณแแแ แแฎแแญแต แแคแถแฝแฃ แจแฎแชแฐแญ แแแถแฝแฃ แจแ แซแฃแข แแแตแ แจแแฐแจแฐ แแแต แแแ แตแซแแฝ แ แแตแฐแแแ แ แแ แณ แ แแแแฃแต แจแแต แจแ แซแ แ แ แญแญแถ แซแฐแญแแ แฐแฅแ แญแ แ แแแข
Via Addis Ababa City Plan and Development Bureaucracy
@etconp
โค3๐2
๐What is Asphalt Road Construction?
๐งAsphalt road construction: involves the use of asphalt, a mixture of aggregates, binder, and filler, to build and maintain roads, highways, and other pavement surfaces.
๐ทThe components of asphalt include aggregates, binder, and filler. Aggregates are the inert materials that provide strength and bulk to the asphalt mixture.
โบCommon aggregates used include crushed rock, sand, gravel, or slags.
The binder is the adhesive substance that holds the aggregates together, with bitumen being the most common binder used.
Fillers are fine materials that fill the gaps between the aggregates and binder, such as limestone dust, cement, or hydrated lime.
The asphalt mixture is created by combining the aggregates, binder, and filler in specific proportions. The mixture is then heated to a high temperature (around 300ยฐF) to facilitate mixing and application.
The asphalt road construction process typically involves several steps. First, the site is prepared by clearing the area, removing debris, and grading the surface. Next, a layer of compacted aggregate material is laid down to provide a stable base.
The heated asphalt mixture is then applied to the base course using a paver or spreader.
After the asphalt mixture is applied, it is compacted using rollers or compactors to achieve the desired density and smoothness. Finally, the surface is finished with a layer of asphalt emulsion or sealcoat to protect it from the elements.
Asphalt road construction is used for a wide range of applications, including highways and roads, parking areas, railway tracks, ports and airport runways, bicycle lanes and sidewalks, and playgrounds and sports areas.
Asphalt is a popular choice for road construction due to its durability, flexibility, and resistance to heavy traffic and harsh weather conditions.
@etconp
๐งAsphalt road construction: involves the use of asphalt, a mixture of aggregates, binder, and filler, to build and maintain roads, highways, and other pavement surfaces.
๐ทThe components of asphalt include aggregates, binder, and filler. Aggregates are the inert materials that provide strength and bulk to the asphalt mixture.
โบCommon aggregates used include crushed rock, sand, gravel, or slags.
The binder is the adhesive substance that holds the aggregates together, with bitumen being the most common binder used.
Fillers are fine materials that fill the gaps between the aggregates and binder, such as limestone dust, cement, or hydrated lime.
The asphalt mixture is created by combining the aggregates, binder, and filler in specific proportions. The mixture is then heated to a high temperature (around 300ยฐF) to facilitate mixing and application.
The asphalt road construction process typically involves several steps. First, the site is prepared by clearing the area, removing debris, and grading the surface. Next, a layer of compacted aggregate material is laid down to provide a stable base.
The heated asphalt mixture is then applied to the base course using a paver or spreader.
After the asphalt mixture is applied, it is compacted using rollers or compactors to achieve the desired density and smoothness. Finally, the surface is finished with a layer of asphalt emulsion or sealcoat to protect it from the elements.
Asphalt road construction is used for a wide range of applications, including highways and roads, parking areas, railway tracks, ports and airport runways, bicycle lanes and sidewalks, and playgrounds and sports areas.
Asphalt is a popular choice for road construction due to its durability, flexibility, and resistance to heavy traffic and harsh weather conditions.
@etconp
๐23โค2