Ethio Construction Engineering
32.3K subscribers
6.28K photos
359 videos
1.99K files
3.34K links
🔨 World Construction Engineering
Latest updates, tips, and tutorials on building, civil engineering, and construction in World.
Learn, build, and grow with us!

📨 @Philemona7 Or @ETCONpBOT

For Ad:- https://telega.io/c/etconp
Download Telegram
▶️WHAT IS SEGREGATION??

✓Segregation is a separation of cement from aggregate

✓This is caused due to improper water cement ratio

✓This is also caused when concrete is poured about more then 1.5m height
.
⚡ አሁኑኑ Join በማረግ እና ለጓደኛዎ እና ለሚያቁት ሁሉ ሼር ያድርጉ።
👉ይህ የምትመለከቱት ህንፃ ቦሌ አካባቢ የሚገኝ ሲሆን ሞሞና ሆቴል ይባላል፡፡ አርክቴክቱ የተጠቀመው (Clustered Organization) ሲሆን በቀለም ምርጫውም ቢሆን በኢትየጵያ ውስጥ አለ የተባለ ምሳሌ የሚሆን ህንፃ ነው፡፡እናንተም ከወደዳችሁት Like እና Share ይደረግ:: እናመሰግናለን::
.
▶️ውብ ምሽት ይሁንላቹ፡፡
Ethio Construction Engineering
How to read contour lines on topographic maps @etconp
Contour maps are very useful since
they provide valuable information about the terrain. Some of
the uses are as follows:
i) The nature of the ground and its slope can be estimated
ii) Earth work can be estimated for civil engineering projects
like road works, railway, canals, dams etc.
iii) It is possible to identify suitable site for any project from
the contour map of the region.
iv) Inter-visibility of points can be ascertained using contour
maps. This is most useful for locating communication towers.

@etconp
When earthquake occurs the shock wave of released energy that shake the earth 🌍 and temporarily turn soft deposits such as clay into jelly (liquefaction) are called seismic wave the Greek ‘seismos’ meaning earthquake seismic waves are generated by movement of earth tectonic plates but may also be caused by explosions , volcanic eruptions and land slide
Types of seismic waves
▶️ስለ Grouting ኣብረን እንይ
.
👉Grouting is a method of filling up and repair of cracks in concrete.
Step by step grouting procedure needs to be followed for effective repair of concrete cracks.
Grouting Procedure for Repair of Cracks in Concrete Structures: Procedure of grouting for repair of concrete cracks in structures are:
1. Holes are drilled in structure along cracks and in an around hollow spots.
2.If there are several cracks, holes can be drilled in a staggered manner at 500 to 750mm spacing in both directions covering adequately the area proposed to be grouted.
Holes spacing can be altered as per site conditions.
3. G.I. pieces (12 to 20mm dia x 200mm) with one end threaded or PVC nozzles are fixed in the holes with rich cement mortar.
4. All the cracks and annular space around G.I. pipes are sealed with rich cement mortar.
5. All the cracks are cut open to a ‘V’ shaped groove, cleaned & sealed with rich cement mortar.
6. All the grout holes should be sluiced with water using the same equipment a day before grouting as per following sequence; so as to saturate the masonry.
All holes are first plugged with proper wooden plugs or
locked in the case of PVC nozzles. The bottom most
plug and the two adjacent plugs are removed and
water injected in the bottom most hole under pressure.
When the clear water comes out through the adjacent
holes the injection of water is stopped and the plugs in the
bottom most hole and the one immediately above are
restored.
The process of grouting of concrete cracks is repeated with other holes till all the holes are covered.
On the day of grouting all the plugs are removed to drain out excess water and restored before commencing grouting.
The same sequence as described above is adopted for
injecting the cement grout also.
The grout is kept fully stirred/ agitated under pressure throughout the grouting.
The grouting is carried out till refusal and/ or till grout starts flowing from the adjacent hole.
A proper record of the quantity of grout injected into every hole should be maintained.
After grouting, curing should be done for14 days. Tell tales
are provided for checking the effectiveness of grouting.
Only such quantities of material for preparing grout should be
used, as can be used within 15 minutes of its
mixing. Grouting equipment must be cleaned thoroughly after
use.

@etconp
👍1
The Importance of Water/Cement Ratio
.
Three simple ingredients can be blended and proportioned numerous ways to make concrete: aggregate, cement and water.
In concrete, the single most significant influence on most or all of the properties is the amount of water used in the mix.
In concrete mix design, the ratio of the amount of water to the amount of cement used (both by weight) is called the water to cement ratio (w/c). These two ingredients are responsible
for binding everything together.
The water to cement ratio, or w/c ratio, largely determines the
strength and durability of the concrete when it is cured
properly.
The w/c ratio refers to the ratio of the weights of water and cement used in the concrete mix.
A w/c ratio of 0.4 means that for every 100 lbs of cement used in the concrete, 40 lbs of water is added.
For ordinary concrete (sidewalks and driveways), a w/c ratio of 0.6 to 0.7 is considered normal.
A lower w/c ratio of 0.4 is generally specified if a higher quality concrete is desired.
The practical range of the w/c raio is from about 0.3 to over 0.8. A ratio of 0.3 is very stiff (unless superplasticizers are used), and a ratio of 0.8 makes a wet and fairly weak concrete. For reference, a 0.4 w/c ratio is generally expected to make a concrete with a compressive strength (its f’c) of about 5600 psi when it is properly cured.
On the other hand, a ratio of 0.8 will make a weak concrete of only about 2000 psi.
The simplest way to think about the w/c ratio is to think that the greater the amount of water in a concrete mix, the more
dilute the cement paste will be.
This not only affects the compressive strength, it also affects the tensile and flexural strengths, the porosity, the shrinkage and the color.
The more the w/c ratio is increased (that is, the more water that is added for a fixed amount of cement), the more the strength of the resulting concrete is reduced.
This is mostly because adding more water creates a diluted paste that is weaker and more susceptible to cracking and shrinkage.
Shrinkage leads to micro-cracks, which are zones of weakness. Once the fresh concrete is placed, excess water is squeezed out of the paste by the weight of the aggregate and
the cement paste itself. When there is a large excess of water,
that water bleeds out onto the surface. The micro channels
and passages that were created inside the concrete to allow
that water to flow become weak zones and micro-cracks.
Using a low w/c ratio is the usual way to achieve a high
strength and high quality concrete, but it does not guarantee
that the resulting concrete is always appropriate for
countertops. Unless the aggregate gradation and proportion
are balanced with the correct amount of cement paste,
excessive shrinkage, cracking and curling can result. Good
concrete results from good mix design, and a low w/c ratio is
just one part of a good mix

@etconp