Ethio Construction Engineering
32.3K subscribers
6.28K photos
359 videos
1.99K files
3.35K links
🔨 World Construction Engineering
Latest updates, tips, and tutorials on building, civil engineering, and construction in World.
Learn, build, and grow with us!

📨 @Philemona7 Or @ETCONpBOT

For Ad:- https://telega.io/c/etconp
Download Telegram
👆👆👆👆👆👆👆👆👆👆👆👆👆👆👆👆👆👆👆
.
.
👉Traverse calculation usefull information for land surveyors
▶️ይህ የምትመለከቱት G+4 ህንፃ የህንፃውን ኮንስትራክሽን ስህተት ያያችሁት ይመስለኛል ከመሀንዲሶቻችን የማይጠበቅ አሳፋሪ ስህተት ነው።😔
እናንተስ ምን ትላላችሁ @COTMp ወይም Discussion ላይ ግለፁልን፡፡
፡
👉ሌሎችም እንዲመለከቱት ሼር ይደረግ፡፡
▶️Slump test 👆👆👆

@etconp
Things Site Engineers Must Know About Reinforcement and
Steel Bars
.
Clear cover to main reinforcement
.
Footings : 50 mm
Raft foundation Top : 50 mm
Raft foundation Bottom/ sides : 75 mm
Strap Beam : 50 mm
Grade Slab : 20 mm
Column : 40 mm (d>12mm) 25 mm (d= 12mm)
Shear Wall : 25 mm
Beams : 25 mm
Slabs : 15 mm or not less than diameter of the bar.
Flat Slab : 20 mm
Staircase : 15 mm
Retaining Wall on Earth : 20/ 25 mm
Water retaining structures : 20 / 30 mm
Sunshade (Chajja) : 25 mm
.
Hook for stirrups is 9D for one side
No. of stirrups = (clear span/Spanning) + 1
.
For Cantilever anchorage length for main steel is 69D
.
“L” for column main rod in footing is minimum of 300mm
.
Chairs of minimum 12 mm diameter bars should be used.
.
Minimum diameter of dowel bars should be 12 mm.

@etconp
❤1
👉True Meridian vs magnetic Meridian
.
▶️True Meridian is The direction from any point along a meridian towards the North Pole of the earth is defined as true north. That is, the north according to the earth’s axis. True north is also known as geographic north. True south is also defined in a similar manner.
True meridian is defined as the plane that passes through true north poles and true south poles at the place of observation. True meridian can be established by astronomical observation as it passes through true north and south.
True bearing is the horizontal angle between true meridian and a line.
.
▶️Magnetic Meridian
.
The magnetic north is the direction indicated by a freely suspended and balanced magnetic needle. Magnetic meridian is the line that is parallel to the direction taken by a freely moving magnetized needle.
.
The angle between magnetic meridian and true meridian is known as magnetic declination.
A line having zero declination is known as Agonic line.
The lines that have the same declination are known as Isogonic lines.
Magnetic bearing is the horizontal angle between magnetic meridian and a line.

@etconp
▶️Flexural Strength vs Tensile Strength
.
👉Flexural Strength is the capacity of the concrete
(usually beams) to resist deformation under
bending moment. It is sometimes called Bending
Strength.
.
👉Tensile Strength is the capacity of concrete to resist
tension/stretched tight.
The similarity is that, by definition - They are both
concrete’s capacity in resisting deformation under
loads. But the loads to which they are resisting
are different.
Civil Vs arch
👌👌👌 ገነተ-ልዑል 👌👌👌
፡
👉የቀዳሞ ዓፄ ሀ/ሥላሴ ቤተ-መንግሥት ዋና መግቢያ
፡
▶️ውብ ምሽት ተመኘን❤️
👉ስለ የ joint ዓይነቶች አብረን እንይ
፡
▶️An expansion joint or movement joint is an
assembly designed to safely absorb the heat-
induced expansion and contraction of construction
materials, to absorb vibration, to hold parts
together, or to allow movement due to ground
settlement or earthquakes. They are commonly
found between sections of buildings, bridges ,
sidewalks, railway tracks, piping systems, ships,
and other structures.
Building faces, concrete slabs, and pipelines
expand and contract due to warming and cooling
from seasonal variation, or due to other heat
sources. Before expansion joint gaps were built into
these structures, they would crack under the stress
induced.
.
▶️Control joints, or contraction joints, are sometimes
confused with expansion joints, but are completely
different in purpose and function. Control joints are
cut into pavement at regular intervals to control
cracking. Concrete and asphalt have relatively
weak tensile strength, and typically form cracks as
they age, shrink, and are exposed to environmental
stresses (including stresses of thermal expansion
and contraction). Without the control joint, cracking
can occur in a random fashion, and compromise
the surface of the structure. This is primarily an
aesthetic issue. Control joints attenuate the
cracking in a more controlled fashion. The cracks
will tend to form along the cut planes that makes
up the control joints.
.
▶️A construction joint occurs when there are multiple
concrete placements. It can occur between different
days of concrete placements as shown below.
There is a construction joint between the placement
of a footing and the placement of the column.

@etconp

Facebook:- https://www.facebook.com/etconp/