Ethio Construction Engineering
32.3K subscribers
6.28K photos
359 videos
1.99K files
3.34K links
🔨 World Construction Engineering
Latest updates, tips, and tutorials on building, civil engineering, and construction in World.
Learn, build, and grow with us!

📨 @Philemona7 Or @ETCONpBOT

For Ad:- https://telega.io/c/etconp
Download Telegram
Forwarded from Ethio Construction Engineering (Fîłmøñ Łûël)
Forwarded from Ethio Construction Engineering (Fîłmøñ Łûël)
Forwarded from Ethio Construction Engineering (Fîłmøñ Łûël)
Forwarded from Ethio Construction Engineering (Fîłmøñ Łûël)
Superelevation or Banking of Road:-

When a vehicle travels in a circular path or curved path, it is subjected to an outward force which makes a vehicle to overturn and skid due to Centrifugal force. To overcome this force and for safe travel of a vehicle, the outer edge of the road is raised above the inner edge. This is known as superelevation or banking of road.
Join for more updates via
t.me/COTMp
Forwarded from Ethio Construction Engineering (Fîłmøñ Łûël)
Forwarded from Ethio Construction Engineering (Fîłmøñ Łûël)
👉ዛሬ ደሞ ስለ Weir ትንሽ እናካፍላቹ @COTMp
.
*በምስሉ ላይ እንደሚታየው የዊር ዋና አገልግሎት ውሀውን
በምንፈልገው ጥልቀት በመገደብ በላይኛው ተፋሰስ (Upstream side) ውሀው እንዲከማች ማድረግ ነው፡፡
ቀሪውም ውሀ በዊሩ አናት ላይ ወይም በር/ Gate በማዘጋጀት
እንዲፈስ እናደርገዋለን፡፡
➡የዊር ጥቅም
1. Flood Control - የምንፈልገውን ያህል ጥልቀት ውሃውን ስለምንገድበው በታችኛው ተፋሰስ/ Downstream ጎርፍ ይቀንሳል፡፡
2. Flow Measurement - የዊሩ ዳይሜንሽን ስለሚታወቅ
የወንዙን Discharge በቀላሉ ማወቅ እንችላለን፡፡ ((( Q=
CLH^n )))
3. የተጠራቀመውን ውሀ divert በማድረግ ለእርሻና ለተለያዩ
አገልግሎቶች መጠቀም እንችላለን፡፡
4. ወንዙ ለውሃ ላይ ትራንስፖርት አመቺ እንዲሆን ያደርጋል ፣
የተለያዩ የሚሰደዱ የአሳ ዝርያዎችን እንዳያልፉ ይገድባል
ወዘተ..
➡ የዊር ጉዳት
1. የወንዙን ሁኔታ ሙሉ ለሙሉ ይቀይረዋል
2. Siltation
3. አሳዎቹ የመንቀሳቀስ መብታቸውን ይገድባል ... Fish
Ladder ሊያስፈልግ ይችላል፡፡
4. ዊሩ አካባቢ ውሃው የተረጋጋ ቢመስልም ለዋና/
ለትራንስፖርት አስቸጋሪ ቦታ ነው ሀይድሮሊክ ጃምፕም ይኖራል
➡ የዊር አይነቶች
Polynomial, V - notch, Broad Crested, Compound,
Gated/ Ungated, etc.
Polynomial - የዊሩ ቅርፅ በፓሊኖሚያል equation
ስለሚሠራ ነው V- notch : ዊሩ መሀሉ በ V ቅርፅ ተቆርጦ ወጥቷል፡፡ ይህ በመሆኑም በኖርማል ፍሰት ጊዜ ውሃው በዛ ይፈሳል:: በቅርፁም ምክ/ት discharge ለማግኘት ይቀለናል፡፡ ፎቶው ኮመንት መስጫው ላይ አለ Broad Crested - ጠፍጣፋ የሆነ አናት ወይም flat crest አለው፡፡ በፎቶ የሚታየው እሡ ነው
Compound : የተለያዩ የዊር አይነቶችን አንድ ላይ የያዘ ነው።
ለሁሉም እንዲዳረስ ፖስቶቹን SHARE አድርጉልን።
👇👇👇👇👇
Join for more updates via the link below;
t.me/COTMp
👆👆👆👆👆
Arrangement of different cross section based on there stiffness
Torsion
BNI tower Jakarta Indonesia 🇮🇩
👉 ብዙዎች ስለስራ ቅጥር እና ቫካንሲ በዚህ ቻናል በMessege
ይጠይቁኛል ይህ ቫካንሲ ተከታትሎ ሚያቀርብ ቻናል ባይሆንም አንድ ነገር ጠቁሜ ማለፍ ግን እወዳለውን...
.
የዛሬ አምስት አመት ወይም አስር አመት የት መድረስ ነው ፍላጎትህ/ፍላጎትሽ?
.
የራስህን የኮንስትራክሽን ተቋም ማቋቋም?
ወይስ አንድ ካምፓኒ ውስጥ ተቀጣሪ መሆን?
.
አንድ ሰው ሃብታም ነው የሚባለው የጊዜው እና የገንዘቡ «አለቃ»
መሆን ሲችል እንጂ ብዙ ብር ስለተከፈለው አይደለም።
አንድ ትልቅ ተቋራጭ ውስጥ ተቀጠርክ/ሽ እንበል ...15 ሺ /
20 ሺ ይከፈልሃል ...ብር አለህ ነገር ግን የገንዘብህ እና የጊዜህ
አለቃ አይደለህም። በየወሩ ይከፈልሃል ስለዚህ የገንዘብህ አለቃ አይደለህም በሚወሰንልህ ጊዜ ፍቃድ ይሰጥሃል ስለዚህ የጊዜህ አለቃ አንተ ሳትሆን ሌላ ነው።
.
ምን መሰለህ አንተ ኢንጅኒየር ነህ ሌሎች ሞያዎች ላይ ተደግፎ
ሳይሆን በግልህ ሊያንቀሳቅስህ የሚችል የሞያ ባለቤት ነህ ።
የዚህ ሞያ ባለቤት ከሆንክ ተቀጥሮ ለሌሎች መስራትን ትተህ
ለምን የራስህን ድርጅት አታቋቅምም?
እውቀት አለህ፤ የመስራት አቅም እና ተነሳሽነት አለህ የቸገረህ
ገንዘብ ነው?
Well እስኪ አካባቢህን አስተውል የተመቻቹልህን አማራጮች
ገምግም ... አንድ አማራጭ ልጠቁምህ መንግስት ለወጣቶች
ያመቻቸው የስራ እድል ፈጠራ ... የCobel እና ሌሎች
የኮንስትራክሽን ስራዎች።
ከነዚህ እድሎች አላማህ የአሁን ድሎትህን ሳይሆን የማይነቃነቅ
የነገ ምቾትህን ከሆነ ምትፈልገው ፤ ራእይህ ትልቅ ከሆነ ...ይህን
ራዕይ ሊያሳካ የሚችል ገንዘብ የተወሰነ ቢሆንም ታገኛለህ
እንዳንተ አላማ ካላቸው ጋር ሽርክና ብትፈጥር በአጭር ጊዜ
ውስጥ የራስህን ድርጅት ታስተዳድራለህ። ስራን አታጥላላ ስራን አትናቅ አላማህን በውስጥህ ይዘህ ዝም ብለህ ስራ የነገ ስኬትህ በአደባባይ ይጮኽልሃል።
*እስኪ የ ኣንድ ድርጅት አጀማመር እንንገራቹ እንይ ስሙ ሰንሻይን ኮንስትራክሽን ይባላል የተጀመረው በስለት ገንዘብ ካፒታሉም
20ሺህ ብር ነው። አሁን አሉ ከሚባሉ የኮንስትራክሽን ድርጅቶች
አንደኛው ነው ።
*ተክለ ብርሃን አምባዬ ትልቅ ቦታ እንደሚደርስ አምኖ በትንሽ ገንዘብ ይህን ድርጅት ጀመረ ። አሁን የደረሰበት ደረጃ ሳንወድ በግድ ስለሱ እንድናወራ ያስገድደናል።
.
*እስኪ እነዚህን ስራዎች እንደ መነሻ ልንጠቁምህ በሃይድራውሊክስ ~
✌የሳኒታሪ ኢንስታሌሽን ስራን በትንሹ ብትሰራ
- የሃገራችን ፎቆችን ታዝበኃቸዋል ? አብዛኞቹ ትልቁ ስህተታቸው የሳኒቴሪ ኢንስታሌሽን ስራ ማለትም ከ ዳምፕነስ እናሌሎች ተያያዥ ችግሮች ጋ በተያያዘ ብዙ ሰው ሲያማርር ይስተዋላል ፕሮፌሽናል በሆነ ሰው ስለማይሰሩ ከዚጋ ተያይዞ በሚመጡ ችግሮች ይጎዳሉ። አንተ ደሞ ዲያዝይን እና ኢንስታል የማረግ እውቀት አለክ እና ለምን ይህን ቢዝነስ የሚጠይቀው ትንሽ ካፒታል ስለሆነ ለመጀመር አታስብበትም ??..
.
*የባኞ ቤት እቃዎች ገጠማ እና ዲዛይን ። በዚህ ስራ ራሱን
ችሎ የተሰማራ ድርጅት በጣም ትንሽ ነው አስብበት ።
.
*እና ሌሎች ኣዋጭ የ ኮንስትራክሽን ሃሳቦች ኣሉ ብቻ ኣንተ ኣስብ ... ቁጭ ብለህ ኣታማርር...
.
.
አሁንም እንድትረዳ ምፈልገው ነገር ቢኖር በመንግስት መስሪያ ቤቶች እና በግል ድርጅቶች ተቀጥረው የሚሰሩ ሰዎችን አይተህ ተማር ለነገ ሚሆናቸው ምንም ነገር የላቸውም የ«አበራሽን ጠባሳ
ያየ በእሳት አይጫወትም » እንዲሉ ይህን ለማረጋገጥ ተቀጣሪ
መሆን አይጠበቅብህም።
*በራስህ እምነት ይኑርህ ፤ ደፍረህ ወደ ስራ ግባ ስኬት አጠገብህ ናት !
*Concept Credit @Dawittad
ለሁሉም እንዲዳረስ ፖስቶቹን SHARE አድርጉልን።
👇👇👇👇👇
Join for more updates via the link below;
t.me/COTMp
👆👆👆👆👆
Ethio Construction Engineering
👉What is a Dispute? ▶️Many construction disputes arise out of terms set forth in the contract. Unfortunately, many construction contracts were never reviewed by a construction attorney and are not models of clarity. Because many disputes are won or lost depending…
▶️ከ ባለፈው የቀጠለ...
.
👉Overview of Dispute Resolution Procedures
.
Most contracts contain clauses for claim dispute resolution. The process usually starts with the simplest and quickest procedure then goes in to the next level and so on. Since the court system is lengthy, costly and complicated, other alternative dispute resolution methods have been used. The following methods are usually used in resolving dispute claims.
a)Negotiation: The most direct method for resolving any type of construction dispute. In many cases, the “truth” may not be entirely known or acknowledged and “fairness” is seen differently by the disputing parties. Negotiation requires certain skills that tend to reduce the gap between the negotiating parties. Although negotiation occurs basically between the disputing parties, independent experts or consultants may be asked to give opinions on certain issues.
b)Mediation: When negotiation does not work, either because of lack of trust or skills, an independent neutral or mediator may get involved to bring the disputing parties together. The mediator can be an individual or a team. The mediator must demonstrate neutrality and patience, and must collect all the facts before making any recommendation. The mediator must be skilled in narrowing the gap between the disputing parties and focusing on the positive side of any proposed solution.
c)Dispute Review Board: Rather than waiting until the end of a project to settle claims, dispute review boards (DRBs) may be used to resolve disputes as they arise on a construction project. An independent neutral panel with construction experience is selected by the owner and contractor when the contract is signed, and the parties agree to call upon the neutral to assist them in resolving dispute during construction.
Negotiation, mediation and DRB’s are nonbinding. This means the solution changes its shape -like a piece of dough- during the process until it reaches a form acceptable to both parties. No party is under obligation until it accepts the proposed solution.
d)Arbitration: Arbitration is usually a formal process that is performed by an independent professional arbitrator. Arbitration in construction is usually performed by experts in the construction industry such as architects, engineers, or construction management professionals. Although arbitration is usually binding to both parties, arbitrators do not have the enforcement power that judges have.
It should be noted here that in many contracts, arbitration is specified as a binding process if negotiation and mediation fail. As mentioned above, unlike judges arbitrators cannot enforce their judgment. If a party refuses to comply with the arbitrator’s judgment, it may be necessary for the other party to seek a court’s intervention.
e) Litigation: If the parties cannot reach a settlement by one of the previous processes; the complaining party may sue the other party in a court of the law. The legal process is complex and often involves pri-trial discovery processes such as interrogatories (written questions to the other party) request for the production of documents and pri-trial testimony in depositions. Construction litigation is usually complicated, lengthy and expensive. Many plaintiffs spend more money on attorney’s fees than they later recover by the court’s judgment

Avoiding a Dispute
It is far better to avoid a dispute than to have to resolve one. Some disputes cannot be prevented by prior action, but many can. Ensuring that a formal contract agreement is executed between parties to a contract is a first step towards avoiding disputes. Contractual precautions that provide some safeguard against disputes include ensuring the following things:
•The parties enter into a finalized contract before work commences;
•The scope of works is clearly defined prior to tender;
•The quality constraints are fully defined prior to tender;
•The conditions of the contract are fair & clear, using standard forms unless non standard provisions are essential.
Philadelphia Pennsylvania USA 🇺🇸
ውብ ምሽት ተመኘን
boq final draft Holistic cost analysis .pdf
368.3 KB
BOQ
Forwarded from Ethio Construction Engineering (Henock)
♦WATERPROOFING MEMBRANES(ውሀን የማያዘልቅ ሽፋን)

A waterproofing membrane is a thin layer of water-tight material that is laid over a surface. This layer is continuous and does not allow water to pass through it. For example, on a flat terrace, a waterproofing membrane could be laid above the structural slab and below the finish tiles. This will ensure that water does not seep into the structural slab. The tiles and membrane must be laid over a filler material that is sloped to ensure that water flows into sumps and drains. Any water that remains as puddles over the tiles is likely to seep into the slab over time, so puddles are to be avoided at all costs.

These membranes are composed of thin layers of waterproof material. Most are about 2 to 4mm thick. There are essentially 2 types of membranes,
1. sheet based membranes and
2. liquid applied membranes.

A. sheet based membranes

As the name implies, these are membranes that arrive at the site in the form of rolls. These are then unfurled and laid on a firm surface. The most common type of sheet based membrane is a bituminous waterproofing membrane. This type of membrane is stuck to the substrate with a hot tar based adhesive using blowtorches. 


Joints between adjacent membranes are also made with the same hot adhesive. The sheets are overlapped by about 100mm (4") to form a waterproof joint. Some membranes are even joined by melting them with a hot air gun and then overlapping them on the previously laid sheet.

With this type of membrane, joints between sheets are critical, and must be done perfectly to avoid leakage.


B. liquid applied waterproofing membranes

Liquid applied membranes come to the site in liquid form, which are then either sprayed or brush-applied on the surface. The liquid cures in the air to form a seamless, joint-free membrane. The thickness can be controlled by applying more of the liquid chemical per unit area.

Since the application procedure is very quick, a contractor will try and finish the entire area to be waterproofed in a single day to avoid cold joints. However, if a very large area is to be done on successive days, cold joints can easily be done by overlapping the new membrane over the old - the chemical will stick to itself readily.


These are generally considered to be superior to sheet based membranes as they are joint-free. However care must be taken in application to provide just the right thickness. The membrane can tear or break if it is too thin. The adhesion of the membrane to concrete must be good.

If a concrete screed (layer) is to be applied over a waterproofing membrane, the membrane is made rough by sand broadcasting. This is throwing a thin layer of sand by hand over the wet membrane (before it has set fully) so that the sand sticks to the membrane and provides a rough surface the concrete can adhere to.

# how to select a waterproofing membrane?? ( ምን ላይ ተመርኩዘን ውሀ የማያዘልቅ ሽፋንን እንምረጥ?)

Check for the following properties of the membrane:

♥UV Stability - if the membrane is to be exposed to the sun, than it must be UV stable or UV resistant, else it will degrade over time.

♥ Elongation - this is the ability of the membrane to stretch. It is measured in percentages. An elongation of 150% means that the membrane can stretch to 1.5 times its length when pulled. Elongation is a must in buildings that will move, such as high-rise buildings, or buildings made with steel, which is flexible. This property will allow the membrane to stretch over cracks that may develop in the future. Membranes with elongation properties of over 200% are available.

♥ Breathability - one disadvantage of good waterproofing is that if water does happen to enter into the structure from a point and spread across a surface, that water is trapped inside the structure, and cannot get out. Breathable membranes help to release that water to the air in the form of water vapor. So some membranes are designed to prevent water from passing through them, while at the same time allowing water vapor to pass through. So over time, breathable membranes allow trap
👍1
Forwarded from Ethio Construction Engineering (Henock)
ped water to evaporate into the atomosphere.

♥ Tear Resistance - this is an important property, as many membranes that have good elongation also can tear easily. Take a small sample of the material in your hand, and try and tear it into two pieces. This gives a fair idea of its tear resistance. You are looking for a membrane that will not tear even if a reasonable force is exerted on it.

♥Abrasion Resistance - this is the ability of a membrane to withstand wear and tear. As most membranes are covered concrete screeds and tiling, the abrasion resistance comes into play during the construction period, when workers are walking on the surface, dropping nails and screws, and scraping hard objects like rebar against the membrane, which can damage it. A very soft membrane with low abrasion resistance may get damaged in such a situation, which can cause it to leak.

♥Chemical stability - check that the membrane is chemically inert with respect to its environment in the building. Some membranes, especially outside basement walls, are exposed to the soil and rainwater outside.

♥ Food Safety - membranes can be applied to the inside of concrete water tanks to make them waterproof. In this case, the membrane must be food safe, as the water is in contact with the membrane.

♥ Geometry - if a membrane has to be installed over a complicated shape, such as the junction of a column and beam, then a liquid applied membrane is preferable, as it can be applied to any type of underlying shape or structure. A sheet membrane would form folds and creases and leave gaps between the underlay and membrane.

where are membranes used?( እነዚን ሽፋኖች የት ነው ምንጠቀማቸው?)

# Membranes can be used in the following parts of a building:

♣ over terrace slabs and balconies

♣ in toilets

♣ underneath and around basements

♣ in concrete water tanks (use a food safe membrane)

♣ in swimming pool

♣ over landscaped concrete decks, between the soil and concrete

♣ ​in gutters

For more updates join the channel by using this link
http://t.me/COTMp

@henokbirhanu
👍1
Forwarded from Ethio Construction Engineering (Henock)
Forwarded from Ethio Construction Engineering (Henock)
Forwarded from Ethio Construction Engineering (Henock)
Forwarded from Ethio Construction Engineering (FILA)
⚡ባለፈው ፅሁፋችን ስለ ዊር (Weir) ፅፈን ነበር ብዙ ሰዎችም ስለ ዊር (Weir) እና ባሬጅ (barrage) ልዩነት ጠይቃችሁናል።
⏩ምላሹም እንሆ ... @COTMp
*እስኪ ቀለል ባለ አማርኛ የዊር (Weir) እና ባሬጅ (Barrage)
ልዩነታቸው ምንድነው ለሚለው መልስ ልስጥ።
.
⏩ [ ዊር - Weir ]
ዊር በወንዝ ወይም በውሃ መሄጃ ሸለቆ የሚገነባ የሃይድራውሊክ
መዋቅር ሲሆን ውሃን በማገድ በላይኛው ተፋሰስ (upstream)
በኩል የውሃውን ቁመት/መጠን በሚፈለገው ልክ እንዲሆን
የሚያስችል መዋቅር ነው። ከተፈለገው መጠን በላይ የተከማቸ ውሃ በዊሩ አናት ላይ (crest level) ፈሶ እንዲያልፍ
የሚያስችለውን የመዋቅር አይነት እና ጉልበት እንዲኖረው ሆኖ
ይገነባል። ዊር የሚገነባው ዝፍቀት (immersion) በሚከሰትበት
የወንዝ ወይም የውሃ መውረጃ ላይ ነው።
.
⏩[ባሬጅ - Barrage]
በመቆጣጠሪያ (manual or automatic) ልንቆጣጠራቸው
የምንችላቸው የውሃ ማለፍያ በሮች በዊራችን ላይ የምንገነባ
ከሆነ ይህ መዋቅር Barrage በመባል ይጠራል። ከዊር በተለየ
በባሬጅ ግዜ የውሃ መጠኑን የምንቆጣጠረው የውሃ ማለፍያ
በሮችን በመክፈትና በመዝጋት ነው እነዚህ በሮች በተለያየ ደረጃ /
ከፍታ ይገነባሉ። በባሬጅ ግዜ ከመጠን ያለፈ ውሃ በበሮቹ
ይወገዳል እንጂ በዊሩ አናት ላይ (Overflow) አያልፍም።
.
🚩 የምትሰጡን አስተያየት ሆነ ማበረታቻ ብርታት ይሆነናል!
ምስጋናችን ከልብ ነው።