🔍 QUALITY ASSURANCE (QA) vs. QUALITY CONTROL (QC)

Quality Assurance and Quality Control are closely related, but they serve different purposes in construction.

🔹 1. Quality Assurance (QA)

QA focuses on the processes and systems established to prevent quality problems and ensure that work is planned and performed according to requirements.

Examples:

- Establishing a project quality management plan.
- Preparing inspection and test plans.
- Defining responsibilities and approval procedures.
- Ensuring that suitable procedures are available.

🔹 2. Quality Control (QC)

QC focuses on inspecting, measuring, testing, and verifying that materials and completed work meet specified requirements.

Examples:

- Inspecting reinforcement before casting.
- Checking dimensions and levels.
- Testing concrete samples.
- Verifying installed materials against specifications.

🏗️ Practical Example

QA establishes the required concrete inspection and testing procedures.

QC carries out the specified inspections and tests and records the results.

📌 Both systems are important for construction quality, but neither replaces sound engineering design or competent workmanship.

@ETCONp

#ADVERTISEMENT

INTRODUCE A CUSTOMER. EARN A COMMISSION!

ደንበኛ ያስተዋውቁ፣ ኮሚሽን ያግኙ!

WELCOME TO SUNSPACE FINISHING MATERIALS!

✨ BETTER QUALITY. LOWER PRICES.
✨ የተሻለ ጥራት፣ በተሻለ ዋጋ!

✨ OUR PRODUCTS | የምርት ዓይነቶቻችን

🛁 Bathroom Solutions (WC Set, Shower Panel, Heaters & Accessories)

✨ Ceramics and Porcelain

🔧 PPR Pipes & Fittings

🏠 Granite (Staircase & Kitchen Tops)

💧 Construction Chemicals & Waterproofing Products

📍 VISIT US: Signal Shopping Centre, 1st Floor.

📞 CALL US: 09 11 51 87 40

🤝 SUNSPACE TRADING — LET’S GROW TOGETHER!

#finishing materials #construction materials

🏢 EXPANSION JOINTS — WHY DO BUILDINGS NEED THEM?

An expansion joint is a designed separation that accommodates specified movement between parts of a building or structure.

Materials expand, contract, shrink, and move in response to environmental conditions and structural behavior.

🔹 Why Are Expansion Joints Used?

🌡️ To accommodate temperature-related movement.

🧱 To help manage movement between designated building sections.

🏗️ To reduce unwanted restraint between parts of a structure.

💧 To maintain appropriate weatherproofing or waterproofing where required.

🔹 Where Might They Be Used?

- Long building structures.
- Building envelopes and roofs.
- Floors and pavements.
- Other systems requiring designed movement accommodation.

🔹 What Should Be Considered?

📐 Joint location and width.

🧱 Movement capacity.

💧 Weatherproofing and waterstops where required.

🔩 Connections and detailing.

📋 Maintenance requirements.

⚠️ Expansion joints are not interchangeable with construction joints or control joints. Each serves a different purpose and must be detailed for its intended function.

@ETCONp

🏗️ የህንፃ ዲዛይን እና የግንባታ ፈቃድ Approval Checklist 📋

🏛በኢትዮጵያ የህንፃ ዲዛይን ለማስፀደቅ አስፈላጊ የሆኑ ሰነዶችንና የDrawing መስፈርቶችን ሳይረሱ ለመፈተሽ የተዘጋጀ Professional PDF Checklist

⏱️ ጊዜዎን ይቆጥቡ! አስፈላጊ ሰነድ እንዳይረሳ ያድርጉ!

🗂ይህን በ PDF ፋይል ከፈለጉ ከታች ባለው ሊንክ ያውርዱት👇

https://ye-buna.com/etconp?ref=product_detail&product=6a76b89233390_etconp

💧 DRAINAGE PIPE SLOPE — WHY DOES IT MATTER?

Drainage pipes are installed with a designed gradient to help wastewater flow toward its intended destination.

An unsuitable gradient can contribute to poor drainage performance.

🔹 Why Is Correct Slope Important?

✅ Supports the intended flow of wastewater.

✅ Helps reduce the risk of sediment accumulation.

✅ Supports reliable operation of the drainage system.

✅ Helps avoid drainage problems caused by unsuitable installation.

🔹 What Should Be Checked on Site?

📐 Pipe gradient and alignment.

📏 Pipe diameter.

🔗 Joint connections.

🧱 Pipe bedding and support.

💧 Testing and inspection requirements.

📋 Compliance with approved plumbing drawings.

⚠️ Too little or too much slope can be unsuitable depending on the pipe size, system, and design. Do not assume that a steeper pipe is always better.


@ETCONp

📋 WHAT IS A NONCONFORMANCE REPORT (NCR) IN CONSTRUCTION?

A Nonconformance Report, commonly called an NCR, documents work or materials that do not meet specified project requirements.

It helps the project team record the problem, assess its significance, and manage corrective action.

🔹 When Might an NCR Be Raised?

🧱 Concrete that fails to meet a specified acceptance requirement.

🔩 Reinforcement installed contrary to approved drawings.

📐 Dimensions outside specified tolerances.

📦 Materials that do not comply with approved requirements.

🔹 Typical NCR Process

1️⃣ Identify the nonconformance.

2️⃣ Record the relevant facts and evidence.

3️⃣ Notify the responsible parties.

4️⃣ Assess the issue and determine the appropriate disposition.

5️⃣ Obtain the required approval for corrective action.

6️⃣ Complete the action and verify its effectiveness.

7️⃣ Close the NCR in accordance with project procedures.

📌 Important: Do not conceal nonconforming work or make unauthorized changes. Structural issues may require assessment and approval by the responsible design professional.


@ETCONp

👉ባሁኑ ባለው ዋጋ የተሰራ፣ጨረታ ስትሞሉም የሚጠቅማቹ የመንገድ ስራ BOQ ከፈለጉ ከታች ባለው ሊንክ ያውርዱት👇

https://ye-buna.com/etconp?ref=product_detail&product=6aa4f7a526f13_etconp