Ethio Construction Engineering
32.3K subscribers
6.28K photos
359 videos
1.99K files
3.34K links
๐Ÿ”จ World Construction Engineering
Latest updates, tips, and tutorials on building, civil engineering, and construction in World.
Learn, build, and grow with us!

๐Ÿ“จ @Philemona7 Or @ETCONpBOT

For Ad:- https://telega.io/c/etconp
Download Telegram
๐Ÿ‘†๐Ÿ‘†๐Ÿ‘†๐Ÿ‘†๐Ÿ‘†๐Ÿ‘†๐Ÿ‘†๐Ÿ‘†๐Ÿ‘†๐Ÿ‘†๐Ÿ‘†๐Ÿ‘†To whom it may concern! The above courses are the most relevant course for MSc in construction engineering and management program entrance exam! So any one who is going to take that, shall prepare him/her self based on those above listed courses! Thanks
Civil engineering huge machinery ๐Ÿ‘‡๐Ÿ‘‡๐Ÿ‘‡๐Ÿ‘‡๐Ÿ‘‡
DEEP BEAMS
Deep beams are Reinforced concrete structural elements with large depths in relation to their spans. A deep beam is a beam in which a significant amount of the load is carried to the supports by a compression thrust joining the load and the reactions. According to the EBCS 2 1995, beams are considered as deep beams when
l/hโ‰ค...2 for simple span
...2.5 for continuous
Where l is the effective span measured center to center of supports or 1.15 times clear span, whichever is smaller and h is the overall depth of the deep beam.
Deep beams are usually found at at transfer girders (girders support one or more columns transferring it laterally to other columns) used in multistory buildings to provide column offset , in foundation wall, pile cap rectangular suspended containers (tanks), raft slabs, pile caps, floor diaphragms, shear walls etc.
Behavior of Deep Beams
The behavior of deep beams is significantly different from that of beams of normal proportion (shallow beams) that it requires special consideration in analysis, design and detailing of reinforcement. Elastic analysis of such beams indicates that the usual hypothesis plane section before bending remains plane after bending is not valid for such members. Thus flexural stresses are not linearly distributed even in the elastic range and hence the usual methods used for analysis and design of ordinary reinforced concrete beams are neither suitable nor adequate to determine the strength of reinforced concrete deep beams.
The followings are the major different of deep beam element compared with ordinary beam:
๏ถ Two-Dimensional Action: because of the dimension of deep beam they behave as two-
dimensional action rather than one-dimensional action.
๏ถ Plane Section Do Not Remain Plane: the assumption of plane section remains plane cannot
be used in the deep beam design. The strain distribution is no longer linear.
๏ถ Shear Deformation: the shear deformation cannot be neglected as ๏ถ The stress distribution is not linear even in the elastic stage. At the ultimate limit state the
shape of concrete compressive stress block is not parabolic shape again.
๏ถ The distribution of tensile stress at bottom fiber is constant over the span. In other word the value of tensile stress at bottom fiber at support and at mid span is only little different, for this reason in deep beam the tension reinforcement must be extend to the end of support although that region is small bending moment region (in ordinary beam we can cut off the tension reinforcement and not all of the tension reinforcement in mid span is extended to the end of support, practically only two for anchor the stirrups).
๏ถ The maximum tensile stress at the bottom fiber is far exceeding the magnitude of
compressive stress.

For more information u can join us on
๐Ÿ‘‡๐Ÿ‘‡๐Ÿ‘‡๐Ÿ‘‡๐Ÿ‘‡๐Ÿ‘‡๐Ÿ‘‡
http://t.me/COTMp
๐Ÿ‘†๐Ÿ‘†๐Ÿ‘†๐Ÿ‘†๐Ÿ‘†๐Ÿ‘†๐Ÿ‘†
๐Ÿ‘1
Concrete Cover Blocks is also known as Spacers which is used to provide
spacing at Slab, Column, Beam & foundation.

Application is very simple
as place COVER BLOCK between Rebar (Reinforcement bar) and ground/wall.


Spacers are used to provide specific height for your concrete reinforcement structure before pouring.
There are four types of cover block or Spacers!
1. Slab Cover
2. Column & Beam Cover
3. Foundation Cover
4. Piling Cover

Various Photographs of Cover Blocks according to itโ€™s type, โฌ‡๏ธโฌ‡๏ธโฌ‡๏ธโฌ‡๏ธโฌ‡๏ธ