đFoundation Types @ETCONp
.
1. Shallow Foundations..
.
âļī¸Types: Strips, Pads, Rafts
.
*Shallow Foundations are common in construction and are inexpensive due to their lightweight properties. It is usually not required to employ heavy equipment for constructing shallow foundations.
Situations where they should be used in:
Shallow foundations are used when the strata at shallow depths is strong and has enough bearing capacity to support the above building loads, with respect to reasonable differential settlements. The strong strata must be consistent at the shallow depth, so that settlement can be relatively small.
â Rock or dense sand or gravel that goes towards great depths
â However, it should be noted that shallow foundations should not be designed below GWT and when there are great uplift conditions. The more moisture content is in he soil, the less resistance the foundation gives to the above loads.
â Firm clays at shallow depths lying on top of soft clays that go towards great depths
â Uniform firm clays when there are no trees around the proximity of the foundation structure and around temporary works and where loads can be distributed on the surface area of the foundation
*Situations where they can be used in with ground improvement techniques:
â Loose sands and soft clays at great depths
â Ground improvement should be used because towards the greater depths, groundwater level changes. Also, vibration of equipment can cause overall and differential settlement.
â Peat
â Consider the acidity of soil when implementing ground improvement techniques
â Fill
â More appropriate if the fill is well compacted which will create a higher bearing capacity
â Stiff or high density sand or clay on top of soft clay lying over compact clays at great depths
â Sloping site where sloping effects should be considered and support, such as ground improvement and temporary works, should be used to construct the foundation
â Site with high GWT where dewatering techniques should be used
2. Deep Foundations
.
âļī¸Types: Piles (Click to learn the different types of piles)
*Deep foundations are heavy foundation structures used to transmit heavy loads created from loading and self-weight of the superstructure into the soils of the deep stratum. They can prevent large differential settlements that will affect the strength and robustness of the building. Information that need to be included during scheme design consist of:
â Number of piles
â Diameter of piles
â Thickness of pile caps
*Situations where they should be used in:
Deep foundations are used when the strong strata is located at a depth and piles, caissons, or piers are driven or bored to the strong strata so that structural columns or walls can transmit loads directly to the rock strata. Deep foundations are also used when the soils between the surface and the rock strata has high settlement rate, such as peat and silt. Loads are transmitted and resisted by end-bearing and skin friction.
â Weak soil stratum or loose sand underneath strong or weak stratum
â Driving piles can also help to increase the density of sand and stiffness of clay
â Uniform stiff and firm clays, with trees at the proximity of the foundation
â Even though trees can affect the shrinkage and expansion of soil, trees will not affect the foundation negatively due to piling.
â Peat
â Consider drag on piles and acidicity of soil when implementing ground improvement techniques
â Suitable for high water tables and uplift conditions
â Deep foundations do not need as much dewatering as shallow foundations
â Bored piles should be cased to prevent water damage to piles
â Temporary works should be carefully designed for the stability of the foundation
â Stiff or high density sand or clay on top of soft clay lying over compact clays at great depth
â Soft clay on top to stiff clay at great depths
â Use deep bored piles with casing
â Proposed foundation is close to adjacent building
.
1. Shallow Foundations..
.
âļī¸Types: Strips, Pads, Rafts
.
*Shallow Foundations are common in construction and are inexpensive due to their lightweight properties. It is usually not required to employ heavy equipment for constructing shallow foundations.
Situations where they should be used in:
Shallow foundations are used when the strata at shallow depths is strong and has enough bearing capacity to support the above building loads, with respect to reasonable differential settlements. The strong strata must be consistent at the shallow depth, so that settlement can be relatively small.
â Rock or dense sand or gravel that goes towards great depths
â However, it should be noted that shallow foundations should not be designed below GWT and when there are great uplift conditions. The more moisture content is in he soil, the less resistance the foundation gives to the above loads.
â Firm clays at shallow depths lying on top of soft clays that go towards great depths
â Uniform firm clays when there are no trees around the proximity of the foundation structure and around temporary works and where loads can be distributed on the surface area of the foundation
*Situations where they can be used in with ground improvement techniques:
â Loose sands and soft clays at great depths
â Ground improvement should be used because towards the greater depths, groundwater level changes. Also, vibration of equipment can cause overall and differential settlement.
â Peat
â Consider the acidity of soil when implementing ground improvement techniques
â Fill
â More appropriate if the fill is well compacted which will create a higher bearing capacity
â Stiff or high density sand or clay on top of soft clay lying over compact clays at great depths
â Sloping site where sloping effects should be considered and support, such as ground improvement and temporary works, should be used to construct the foundation
â Site with high GWT where dewatering techniques should be used
2. Deep Foundations
.
âļī¸Types: Piles (Click to learn the different types of piles)
*Deep foundations are heavy foundation structures used to transmit heavy loads created from loading and self-weight of the superstructure into the soils of the deep stratum. They can prevent large differential settlements that will affect the strength and robustness of the building. Information that need to be included during scheme design consist of:
â Number of piles
â Diameter of piles
â Thickness of pile caps
*Situations where they should be used in:
Deep foundations are used when the strong strata is located at a depth and piles, caissons, or piers are driven or bored to the strong strata so that structural columns or walls can transmit loads directly to the rock strata. Deep foundations are also used when the soils between the surface and the rock strata has high settlement rate, such as peat and silt. Loads are transmitted and resisted by end-bearing and skin friction.
â Weak soil stratum or loose sand underneath strong or weak stratum
â Driving piles can also help to increase the density of sand and stiffness of clay
â Uniform stiff and firm clays, with trees at the proximity of the foundation
â Even though trees can affect the shrinkage and expansion of soil, trees will not affect the foundation negatively due to piling.
â Peat
â Consider drag on piles and acidicity of soil when implementing ground improvement techniques
â Suitable for high water tables and uplift conditions
â Deep foundations do not need as much dewatering as shallow foundations
â Bored piles should be cased to prevent water damage to piles
â Temporary works should be carefully designed for the stability of the foundation
â Stiff or high density sand or clay on top of soft clay lying over compact clays at great depth
â Soft clay on top to stiff clay at great depths
â Use deep bored piles with casing
â Proposed foundation is close to adjacent building
â¤1
đ Facts about the Eiffel Tower @ETCONP
.
đSHARE SHARE SHARE
.
đđđđđđđđđđ
.
đSHARE SHARE SHARE
.
đđđđđđđđđđ
Ethio Construction Engineering
đ Facts about the Eiffel Tower @ETCONP . đSHARE SHARE SHARE . đđđđđđđđđđ
đ Facts about the Eiffel Tower @ETCONP
.
âļī¸The history and design aspects of the Eiffel Tower are interesting for engineers even today. Wrought iron was used for the construction of Eiffel Tower with the employment of scaffolds. Mathematical formulas were deliberated for numerous calculations for wind forces and load conditions.
.
âļī¸History Of Eiffel Tower
.....................................
The Eiffel Tower was constructed in Paris for the World Fair 1889 celebrating the centennial of the French Revolution. The Prince of Wales inaugurated the tower. The number of proposals submitted for the design of Eiffel Tower exceeded 700, and Alexandre Gustave Eiffel was selected for this important task. The Eiffel Tower is an iron lattice of the 19th century that is considered to be a universal symbol. It is amongst the Seven Wonders of the World, and one of the most familiar structures. The Eiffel Tower was initially intended to be built in Barcelona, but the location was changed since it was considered to be an expensive proposal. Three hundred workers were employed for this gigantic task that was completed in 2 years and 2 months. The construction involved extensive risks since the safety technology was not yet developed adequately in that era. Risks were severe since neither the modern skyscrapers were available nor the other modern safety equipment had yet been developed. However, due to the care and precautions adopted in the construction, only one labor died during the process.
.
âļī¸Soil Analysis
............................................
Soil analysis was conducted to accurately establish the suitability of soil for the tower with a weight of approximately 10,000 tonnes. It was discovered that though some of the soil was firm and suitable for enduring the tower load, a lot was soft soil that could not resist the heavy load. Additionally, this area was vulnerable to flooding. Using his engineering genius, Eiffel designed two separate systems for the tower foundations, namely the dry foundation and the compressed air system. The foundations near the riverside were dug deeper than those located on the dry side. These foundations were injected with compressed air and metal components normally used for the underwater construction. After completion of the digging, quick drying cement was poured for the provision of the base for the foundation piers. Massive limestone blocks were placed over the cement and sealed by layers of cut stone.
.
âļī¸Engineering Characteristics of Eiffel Tower
.........................................
The Eiffel Tower was built utilizing the most modern engineering technology available in the nineteenth century. Advanced information about the performance of metal trusses and metal arcs under load, including the calculations related to the wind forces, were incorporated in the design. The tower was made of wrought iron and was intended to withstand high wind pressures near the top and throughout the structure. Many similar structures constructed during that era had much less capability to resist such high wind pressures, and a few of the bridges failed due to inaccurate calculations. The design of the Eiffel Tower was not based on a single mathematical formula. Instead, graphical results were used to determine the necessary structural strength, and empirical evidence was utilized to establish the effects of wind on this gigantic structure.
.
âļī¸The history and design aspects of the Eiffel Tower are interesting for engineers even today. Wrought iron was used for the construction of Eiffel Tower with the employment of scaffolds. Mathematical formulas were deliberated for numerous calculations for wind forces and load conditions.
.
âļī¸History Of Eiffel Tower
.....................................
The Eiffel Tower was constructed in Paris for the World Fair 1889 celebrating the centennial of the French Revolution. The Prince of Wales inaugurated the tower. The number of proposals submitted for the design of Eiffel Tower exceeded 700, and Alexandre Gustave Eiffel was selected for this important task. The Eiffel Tower is an iron lattice of the 19th century that is considered to be a universal symbol. It is amongst the Seven Wonders of the World, and one of the most familiar structures. The Eiffel Tower was initially intended to be built in Barcelona, but the location was changed since it was considered to be an expensive proposal. Three hundred workers were employed for this gigantic task that was completed in 2 years and 2 months. The construction involved extensive risks since the safety technology was not yet developed adequately in that era. Risks were severe since neither the modern skyscrapers were available nor the other modern safety equipment had yet been developed. However, due to the care and precautions adopted in the construction, only one labor died during the process.
.
âļī¸Soil Analysis
............................................
Soil analysis was conducted to accurately establish the suitability of soil for the tower with a weight of approximately 10,000 tonnes. It was discovered that though some of the soil was firm and suitable for enduring the tower load, a lot was soft soil that could not resist the heavy load. Additionally, this area was vulnerable to flooding. Using his engineering genius, Eiffel designed two separate systems for the tower foundations, namely the dry foundation and the compressed air system. The foundations near the riverside were dug deeper than those located on the dry side. These foundations were injected with compressed air and metal components normally used for the underwater construction. After completion of the digging, quick drying cement was poured for the provision of the base for the foundation piers. Massive limestone blocks were placed over the cement and sealed by layers of cut stone.
.
âļī¸Engineering Characteristics of Eiffel Tower
.........................................
The Eiffel Tower was built utilizing the most modern engineering technology available in the nineteenth century. Advanced information about the performance of metal trusses and metal arcs under load, including the calculations related to the wind forces, were incorporated in the design. The tower was made of wrought iron and was intended to withstand high wind pressures near the top and throughout the structure. Many similar structures constructed during that era had much less capability to resist such high wind pressures, and a few of the bridges failed due to inaccurate calculations. The design of the Eiffel Tower was not based on a single mathematical formula. Instead, graphical results were used to determine the necessary structural strength, and empirical evidence was utilized to establish the effects of wind on this gigantic structure.
â¤1
Los angels California USA đēđ¸
ááĨ ááŊáĩ á°ááá
ŲŲØ§ ŲØĒŲ ŲŲ ØŖŲ ØŗŲØŠ ØŦŲ ŲŲØŠ
æå叿æä¸åįžéēį夿
ā¤šā¤Žā¤¨āĨ ā¤ā¤ ā¤āĨā¤Ŧ⤏āĨ⤰⤤ ā¤ļā¤žā¤Ž ā¤āĨ ā¤ā¤žā¤Žā¤¨ā¤ž ā¤āĨ
We wished a beautiful evening
@ETCONp
ááĨ ááŊáĩ á°ááá
ŲŲØ§ ŲØĒŲ ŲŲ ØŖŲ ØŗŲØŠ ØŦŲ ŲŲØŠ
æå叿æä¸åįžéēį夿
ā¤šā¤Žā¤¨āĨ ā¤ā¤ ā¤āĨā¤Ŧ⤏āĨ⤰⤤ ā¤ļā¤žā¤Ž ā¤āĨ ā¤ā¤žā¤Žā¤¨ā¤ž ā¤āĨ
We wished a beautiful evening
@ETCONp
đᨠááá° áááĩ á áá áááģ ᨠ@ETCONp
.
âļī¸á¨áá¨ááá´áŊá ááááĩá áĨáá´áĩ ááĩáááĩ áĨááŊááá?
.
âáá¨ááá´áŊá á áĩáá ááĩ áááŗáŊá ááĩáĨ á¨ááĢááĨáá áá°áļáŊá á¨ááá°á ááááļáŊ ááĩáĨ á ááą áááĄáĄ
*á á°áá á á¨áá°á áĩáá ááĩ áá ááá áĢá á áŗáŗáááááļáŊá áŖ ááŽáááļáŊá áŖ á¨áááá áĩáĢááŊá áĨá á¨ááŗá°ááĩá á°ááĒááŊ á áááĩ ááĩáĨ áá¨áááĩ áĨáá˛áĢá°áá áá ááááĄáĄ
*á¨áĩáá ááĩ á áá ááĒá á á°ááĢᎠá¨áĩáĢ ááŗáŽáŊ áá áá¨áááĩ áĨááĩáá°áá áá á á áĨá ááŊáááĄáĄ
*áŗá˛áĢ á áá¨ááá´áŊá áá á¨áĨáááŊ áŊáá ááááĩ áááĄáĄ á°á ááĩ áá á¨áááá ááááĩáĄáĄ
*á¨áá¨ááá´áŊá ááááĩ á¨áĨá á°ááŊ áŊáá áááĄáĄ áĨááļáŊ áĨáá°áá áááĩ áĨáĩᨠ80 % á¨ááááĩá á°ááŊ áá áĢá áŊáá áááĄáĄ á áĨáááĨ áŊáá áá á°áĨáá áááŗá á ááŊá áááááĄáĄ ááááĢáąá ááá áĢáá á¨áᎠᨠpublic speaking áááĩ áĢáá¸á á áá˛áĩáļáŊáŖ ááá˛á¨ááŊáŖ á¨áááááĩ ááĒááŊ áá á¨áááŠáĩ common áĩááĩ áĩááá áááĄáĄ
*áá á¨áá¨ááá´áŊá (public speaking) ááááĩ á¤áá áĩááĩ áááĄáĄ á¨ááá á°á á¨ááĢ á°ááĩá áĨáá˛áĢáá á¨áĢáą áĨá ááŊá áĢááĩ áĩááĩ áááĄáĄ áŊáá á¨áááá ááááą á áŖá á¨á áá á áĨ áĢáŖ áááĄáĄ
á¨áá¨á°ááĩ ááááļáŊ á¨áá¨ááá´áŊáá ááááĩ áááááĩá áá¤áŗá áá¨ááá´áŊá áááĩá¨á áĢááááĄáĄ
1. á¨áá¨ááá´áŊá ááááĩ á¤ááá common áĩááĩ áĨáá°áá áá¨áŗáĩáĄáĄ
Literally ááá á°á áááĢááĄáĄ ááŽááąáĄá ááŗááļáŊ ááá áĢá°áááŗá á ááŗááļáŊ á áĢá°áááĩááĄáĄ
*áá á¨ááááĩ áĩááĩ ááĢáĩá°ááá á áŗááá á á°ááĨ áĨááĩáááá ááĢáááá°á áááŖááĄáĄ
*ááááĩ áĨá á á áááĄáĄ áááá áŖáŽáááĢá á á°áááŗáŊá ááĩáĨ á¨ááááá áá á á¨á á ááĩá¨á á¨á áá áĸááá áĨáá˛áá¨á áĢá°ááááĄáĄ
2. áá¨ááá´áŊá ááááĩ (rehearsal )
áá¨ááá´áŊá ááááĩ ááááááĄáĄ áá¨áááĩ á¨ááá°áááá ááá á á°ááĨ ááááŊáááŖ ááááŊáááŖ áĩáááŊáá áĨáá˛áá á°á áĩ á á ááááŊáá á¨áááĩá°áĢááá á ááááĩ áááĄáĄ
*áá¨áááĩ á¨ááĢá°áá á°á áá áĨáá° ááĩá¨á á°ááá áááĄáĄ áá¨ááá´áŊáá á áĢáą á á°áá°á ááááĩ áĩáá áááĄáĄ á áááá ááá á°ááá á á°ááĨ áŗáááááĩ ááĩá¨á áá áĨáá°ááááŖ áá¨áááĩ á¨ááĢá°áá á°áá á á á áááŗ ááááĩ ááĩá¨á áááá áŗááĄáĄ
*á ááááááĩá áĩ áá áá°ááģáŊá ááĩ ááá ááŊáá ááá áĨáģáŊáá ááá á°á ááĩ áĨááŗáá á áá°áĨ áááááĩ ááģáááĄáĄ
" Practice makes perfect"
3. áá¨áááĩáŖ áĨáĢáĩá áá¨áááĩ
4. á á á á¨á ááá°áĩ áŖ áá°áááĩ
5. áá¨áááĩ á¨ááá°ááá áĩá áĻáŗá ááá áĢáá ááĩá ááá áĄáĄ áá á á˛áŖá áá¨áááĩ á¨ááá°ááá áĩ áĻáŗ áá°á áĨáá á áááĩ áá¨áĩá á¨ááááá áĩá áĻáŗ áĩááąá áá¨áŗáĩ áááĄáĄ
6. á ááŖá áĩá ááĩá°áĢá¨ááĄáĄ áĨአá ááŖá áĩ á áĢáĩ áá°áááá áá¨ááĢááĄáĄ
7. áá¨áááĩ á¨ááĩá¨á ááááĩá ááŗá ááŖ áá á á˛áŖá áá¨ááá´áŊáá áĨáá° áá´áŗ áŗááá á¨á°áĢááá ááá áá°ááŊ áĨáá°áááŗáá áĩ áĨáá° áĨአá ááŖá ááá°áĩáĄáĄ
8. á á á á¨ááĩ ááĩáļ ááááĩ
9. áá°á áĨá ááááĩ (á áááááĩ)
10. á¨ááááĒáĢá áá¤áŗá áĩáĢ ááĩáĢáĩáĄáĄ ááááĢáąá á¨á ááŗááļáŊ á¨ááááĩ ááá á á áĩáĢ áĢáááĩáĢáĩá áĢááááááĩ áááĄáĄ
.
http://t.me/ETCONp
.
âļī¸á¨áá¨ááá´áŊá ááááĩá áĨáá´áĩ ááĩáááĩ áĨááŊááá?
.
âáá¨ááá´áŊá á áĩáá ááĩ áááŗáŊá ááĩáĨ á¨ááĢááĨáá áá°áļáŊá á¨ááá°á ááááļáŊ ááĩáĨ á ááą áááĄáĄ
*á á°áá á á¨áá°á áĩáá ááĩ áá ááá áĢá á áŗáŗáááááļáŊá áŖ ááŽáááļáŊá áŖ á¨áááá áĩáĢááŊá áĨá á¨ááŗá°ááĩá á°ááĒááŊ á áááĩ ááĩáĨ áá¨áááĩ áĨáá˛áĢá°áá áá ááááĄáĄ
*á¨áĩáá ááĩ á áá ááĒá á á°ááĢᎠá¨áĩáĢ ááŗáŽáŊ áá áá¨áááĩ áĨááĩáá°áá áá á á áĨá ááŊáááĄáĄ
*áŗá˛áĢ á áá¨ááá´áŊá áá á¨áĨáááŊ áŊáá ááááĩ áááĄáĄ á°á ááĩ áá á¨áááá ááááĩáĄáĄ
*á¨áá¨ááá´áŊá ááááĩ á¨áĨá á°ááŊ áŊáá áááĄáĄ áĨááļáŊ áĨáá°áá áááĩ áĨáĩᨠ80 % á¨ááááĩá á°ááŊ áá áĢá áŊáá áááĄáĄ á áĨáááĨ áŊáá áá á°áĨáá áááŗá á ááŊá áááááĄáĄ ááááĢáąá ááá áĢáá á¨áᎠᨠpublic speaking áááĩ áĢáá¸á á áá˛áĩáļáŊáŖ ááá˛á¨ááŊáŖ á¨áááááĩ ááĒááŊ áá á¨áááŠáĩ common áĩááĩ áĩááá áááĄáĄ
*áá á¨áá¨ááá´áŊá (public speaking) ááááĩ á¤áá áĩááĩ áááĄáĄ á¨ááá á°á á¨ááĢ á°ááĩá áĨáá˛áĢáá á¨áĢáą áĨá ááŊá áĢááĩ áĩááĩ áááĄáĄ áŊáá á¨áááá ááááą á áŖá á¨á áá á áĨ áĢáŖ áááĄáĄ
á¨áá¨á°ááĩ ááááļáŊ á¨áá¨ááá´áŊáá ááááĩ áááááĩá áá¤áŗá áá¨ááá´áŊá áááĩá¨á áĢááááĄáĄ
1. á¨áá¨ááá´áŊá ááááĩ á¤ááá common áĩááĩ áĨáá°áá áá¨áŗáĩáĄáĄ
Literally ááá á°á áááĢááĄáĄ ááŽááąáĄá ááŗááļáŊ ááá áĢá°áááŗá á ááŗááļáŊ á áĢá°áááĩááĄáĄ
*áá á¨ááááĩ áĩááĩ ááĢáĩá°ááá á áŗááá á á°ááĨ áĨááĩáááá ááĢáááá°á áááŖááĄáĄ
*ááááĩ áĨá á á áááĄáĄ áááá áŖáŽáááĢá á á°áááŗáŊá ááĩáĨ á¨ááááá áá á á¨á á ááĩá¨á á¨á áá áĸááá áĨáá˛áá¨á áĢá°ááááĄáĄ
2. áá¨ááá´áŊá ááááĩ (rehearsal )
áá¨ááá´áŊá ááááĩ ááááááĄáĄ áá¨áááĩ á¨ááá°áááá ááá á á°ááĨ ááááŊáááŖ ááááŊáááŖ áĩáááŊáá áĨáá˛áá á°á áĩ á á ááááŊáá á¨áááĩá°áĢááá á ááááĩ áááĄáĄ
*áá¨áááĩ á¨ááĢá°áá á°á áá áĨáá° ááĩá¨á á°ááá áááĄáĄ áá¨ááá´áŊáá á áĢáą á á°áá°á ááááĩ áĩáá áááĄáĄ á áááá ááá á°ááá á á°ááĨ áŗáááááĩ ááĩá¨á áá áĨáá°ááááŖ áá¨áááĩ á¨ááĢá°áá á°áá á á á áááŗ ááááĩ ááĩá¨á áááá áŗááĄáĄ
*á ááááááĩá áĩ áá áá°ááģáŊá ááĩ ááá ááŊáá ááá áĨáģáŊáá ááá á°á ááĩ áĨááŗáá á áá°áĨ áááááĩ ááģáááĄáĄ
" Practice makes perfect"
3. áá¨áááĩáŖ áĨáĢáĩá áá¨áááĩ
4. á á á á¨á ááá°áĩ áŖ áá°áááĩ
5. áá¨áááĩ á¨ááá°ááá áĩá áĻáŗá ááá áĢáá ááĩá ááá áĄáĄ áá á á˛áŖá áá¨áááĩ á¨ááá°ááá áĩ áĻáŗ áá°á áĨáá á áááĩ áá¨áĩá á¨ááááá áĩá áĻáŗ áĩááąá áá¨áŗáĩ áááĄáĄ
6. á ááŖá áĩá ááĩá°áĢá¨ááĄáĄ áĨአá ááŖá áĩ á áĢáĩ áá°áááá áá¨ááĢááĄáĄ
7. áá¨áááĩ á¨ááĩá¨á ááááĩá ááŗá ááŖ áá á á˛áŖá áá¨ááá´áŊáá áĨáá° áá´áŗ áŗááá á¨á°áĢááá ááá áá°ááŊ áĨáá°áááŗáá áĩ áĨáá° áĨአá ááŖá ááá°áĩáĄáĄ
8. á á á á¨ááĩ ááĩáļ ááááĩ
9. áá°á áĨá ááááĩ (á áááááĩ)
10. á¨ááááĒáĢá áá¤áŗá áĩáĢ ááĩáĢáĩáĄáĄ ááááĢáąá á¨á ááŗááļáŊ á¨ááááĩ ááá á á áĩáĢ áĢáááĩáĢáĩá áĢááááááĩ áááĄáĄ
.
http://t.me/ETCONp
Telegram
Ethio Construction Engineering
đ¨ World Construction Engineering
Latest updates, tips, and tutorials on building, civil engineering, and construction in World.
Learn, build, and grow with us!
đ¨ @Philemona7 Or @ETCONpBOT
For Ad:- https://telega.io/c/etconp
Latest updates, tips, and tutorials on building, civil engineering, and construction in World.
Learn, build, and grow with us!
đ¨ @Philemona7 Or @ETCONpBOT
For Ad:- https://telega.io/c/etconp
âļī¸TODAY BIG TIP ... @ETCONp
:
đá áĨááááģáš á á á¨ááŊáá áá°á¨áĩ áĨáá˛áá áŖáá áááĩá°áŠáĩ HOLSTIC PROJECT á ááĨ áááá áĨáá áĢá°áĨáá¸á ᨠHOLSTIC PROJECT SAMPLE áĨááĢáš áĨááááĄáĄ
áĄ
đ žá ááá Join á áá¨á áĨá ááá°áá áĨá áááĢááĩ áá áŧá áĢáĩáááĸ
.
đđđđđđđđđđđđđ
:
đá áĨááááģáš á á á¨ááŊáá áá°á¨áĩ áĨáá˛áá áŖáá áááĩá°áŠáĩ HOLSTIC PROJECT á ááĨ áááá áĨáá áĢá°áĨáá¸á ᨠHOLSTIC PROJECT SAMPLE áĨááĢáš áĨááááĄáĄ
áĄ
đ žá ááá Join á áá¨á áĨá ááá°áá áĨá áááĢááĩ áá áŧá áĢáĩáááĸ
.
đđđđđđđđđđđđđ