Ethio Construction Engineering
32.3K subscribers
6.28K photos
359 videos
1.99K files
3.36K links
🔨 World Construction Engineering
Latest updates, tips, and tutorials on building, civil engineering, and construction in World.
Learn, build, and grow with us!

📨 @Philemona7 Or @ETCONpBOT

For Ad:- https://telega.io/c/etconp
Download Telegram
👉Tests on Concrete @ETCONp
.
▶️The following are some of the important tests conducted on concrete:
1. Slump test.
2. Compaction factor test.
3. Crushing strength test.
.
1. Slump Test:
This test is conducted to determine the workability of concrete. It needs a slump cone for test Slump cone is a vessel in the shape of a frustum of a cone with diameter at bottom 200mm and 50mm at top and 300 mm high. This cone is kept over a impervious platform and is filled with concrete in four layers. Each layer is tamped with a 16 mm pointed rod for 25 times. After filling completely the cone is gently pulled up. The decrease in the height of the concrete is called slump. Higher the slump, more workable is the concrete.
.
2. Compaction Factor Test:
This is another test to identify the workability of concrete. This test is conducted in the laboratory. The test equipment consists of two hoppers and a cylinder fixed to a stand, the dimensions and the distances between the three vessels being standardized.
*Vessel A and B are having hinged bottoms whereas cylinder C is having fixed bottom. Top vessel A is filled with the concrete to be tested. As soon as it is filled, the hinged door is opened. Concrete is collected in vessel B. Then the hinged door of B is opened to collect concrete in cylinder C. The concrete in cylinder C is weighted.
*Let it be W1.Now cylinder is again filled with the sample of concrete in 50 mm layers, which is compacted by ramming and vibrating. Then the weight of compacted concrete is determined. Let this weight be W2. The ratio W1/W2 is termed as compaction factor.
:
3. Crushing Strength Test: Metallic moulds of size 150 mm × 150 mm × 150 mm are used for casting concrete cubes. Before filling mould, it is properly oiled on its inner surfaces, so that cubes can be easily separated. Fresh cube is filled with concrete to be tested in 3 layers and kept in the room. After 24 hours, cube is removed from the mould and kept under water for curing.
*After 28 days of curing cubes are tested in the compression testing machine. In this test cubes are placed over the smooth surface which is in contact with side plates of mould. The crushing load is noted and crushing strength is found as load divided by surface area (150 × 150 mm2).
Code specify the desirable strength of concrete for 3 days and 7 days for quick assessment of strength of concrete.Desirable Properties of Concrete Appropriate quality and quantity of cement, fine aggregate, coarse aggregate and water should be used so that the green concrete has the following properties:
(a) Desired workability
(b) No segregation in transporting and placing
(c) No bleeding and
(d) No harshness.
:
▶️Hardened concrete should have
(a) required characteristic strength
(b) minimum dimensional changes
(c) good durability
(d) impermeable
(e) good resistance to wear and tear.
▶️Uses of Concrete
1. As bed concrete below column footings, wall footings, on wall at supports to beams
2. As sill concrete
3. Over the parapet walls as coping concrete
4. For flagging the area around buildings
5. For pavements
6. For making building blocks.
*However major use of concrete is as a major ingredient of reinforced and prestressed concrete. Many structural elements like footings, columns, beams, chajjas, lintels, roofs are made with R.C.C. Cement concrete is used for making storage structures like water tanks, bins, silos, bunkers etc. Bridges,dams, retaining walls are R.C.C. structures in which concrete is the major ingredient.
.
http://t.me/COTMp
👉FIELD TESTS FOR AGGREGATE (PART-1) @ETCONp
.
▶️1. SURFACE MOISTURE CONTENT & ABSORPTION
:
*The surface moisture in the aggregate, influences the water
cement ratio, strength and durability of the mix.
*To determine the surface moisture of moist or wet aggregate,
method is as follows-
FRYING PAN METHOD
*
The following apparatus are required:
°A frying pan or metal tray,
°Gas stove or an electric hair dryer,
°A metal or glass stirring rod and
°Scales to measures.
*The following procedure is followed during the test
1. For coarse aggregate 2 kg sample is adequate and for
fine aggregate 0.5 kg sample is adequate.
2. The wet/moist sample is then weighed wet weight (W)
3. Heated very gently on the frying pan or metal plate and stirred with a glass or metallic rod to maintain uniform
distribution of heat, until the sheen disappears from the
surface. The fine aggregates become surface dry when
it just starts showing free flowing characteristics.
4. The aggregates is then cooled and reweighed. The
surface dry aggregate weight (W ) is noted. The
surface moisture is then calculated as follows-
Surface moisture = [(W – W ) / W ] x 100%
5. Overheating must be avoided, as it will not give the
correct surface moisture .
6. If heating is continued either on the fry pan or in the
oven till the aggregate is bone dry aggregate weight is
then noted (Wbd) after continuous heating.
*The absorption (absorbed water content) is then calculated
as follows- Absorption = [(W – W ) / W ] x 100%
*Similarly, if the dry aggregates are received on site and
absorption capacity is to be determined then the aggregates
are first soaked in water and then the above methods are
deployed to determine the absorption capacity of
aggregates.
:
👋ሌሎች ቴስቶችም ይቀጥላሉ...
፡
http://t.me/COTMp
👉በመቐለ ስለሚገነቡት መኖሪያ ቤቶች @ETCONp

- ባለ 17 ወላል ያላቸው 200 ህንጻዎች ይገነባሉ።

- በግንባታው ውስጥ ባለ ሁለት ፣ ባለ ሶስትና አራት መኝታ ክፍሎች ያሉዋቸው 75 ሺ ህዝብ የመያዝ አቅም ያላቸው 15 ሺህ መኖሪያ ቤቶች ይኖራሉ።

- ግንባታው በ100 ሄክታር የሚያርፍ ሲሆን 60 በመቶ የሚሆን ቦታው ለአረንጋዴ ልማት ይውላል።

- የስፖርት ማዘውተሪያ ፣ ባንክ ፤ የጤና የትምህርት ተቋማት ያሟላ ነው። በግንባታው ሂደት ለ10ሺህ ሰዎች ጊዜያዊ የስራ እድል የመፍጠር አቅም አለው።

▶️የሱር ኮንስትራክሽን ስራ አስኪያጅ ኢ/ር የማነ ታደሰ
👍1
👉እንድታውቁት @ETCONp
.
▶️Current Price per Berga including VAT
.
▶️LOCAL REBARS(G75)
:
*8mm=174
*10mm=271
*12mm=389
*14mm=530
*16mm=693
*20mm=1,082
*24mm=1,558
.
▶️TURKEY REBAR(G75)
.
*8mm=181
*10mm=282
*12mm=405
.
.
▶️Machine current rental price in birr
.
*Grader 1000 per hour
*Dozer 1800 per hour
*Excavator 900 per hour
*Roller 400 per hour
👉Shortcut Keys For AutoCad
.
👌SHARE @ETCONp
❤1
What’s this mode of failure ?
This media is not supported in your browser
VIEW IN TELEGRAM
Dear Ethiopian construction work professionals !
This is how you make Homemade Sanitizer.

900ml 70% Alcohol and 100m glycerin - Total 1000ml, then mix it well.
ቤቶ ሳኒታይዘር እንዲህ ያዘጋጁ እራሶን ከ ኮሮና ቫይረስ ይከላከሉ


https://t.me/ETCONp
Source :-Sheger gebeta
ጥያቄ

regarding to construction material

Wearing of stone is determined by ____?
1. Abrasion test
2. Impact test
3. Crushing test
4. Attrition test

https://t.me/ETCONp
👉መቄዶንያ የአረጋውያንና የአዕምሮ ሕሙማን መርጃ ማዕከል ከ1.2 ቢሊዮን ብር በላይ የሚፈጅ ባለ 2 ቤዝመንት ግራውንድ ፕላስ 11 (2B+G+11) የሆነ ዘመናዊ ሆስፒታልና ምቹ የአረጋውያን መኖሪያ ህንፃ ከነቴራሱ 15 ወለሎች ያሉትና 3,600 ካ.ሜ ቦታ ላይ የሚያርፍ፣ ለሕክምና ብቻ 1,200 አልጋዎች ያሉት፣ 5,000 ሰው የሚይዝ አዳራሽ፣ ለ120 መኪኖች የማቆሚያ ስፍራ ያለው፣ ለአካል ጉዳተኞችና አቅመ ደካሞች ምቹ የሆነ ሕንፃ በከፍተኛ በማስገንባት ላይ ሲገኝ ዛሬ በሚሊኒየም አዳራሽ የምስጋናና የገቢ ማሰባሰቢያ መርኃግብር እየተካሄደ ይገኛል፡፡
:
👉8161 📞 Ok
:
👉ሰው ለመርዳት ሰው መሆን በቂ ነው፡፡ @ETCONp
New York USA 🇺🇸
ሰናይ ቀን ተመኘን

@ETCONp
This media is not supported in your browser
VIEW IN TELEGRAM
What type of method is that?
@ETCONp
Forwarded from Ethio Construction Engineering (जॉर्डनो ג׳ורדנו ጆርዳኖ جوردانو จอร์แดโน่ JORDANO Ιορδάνοςஜார்டானோ)
ይህ የምትመለከቱት ህንፃ ሳር ቤት አካባቢ የሚገኝ ነው፤ እናም በሮዝ ቀለም የተከበውን beam ለማቆም ይህን ሁሉ scaffold ተጠቅመዋል ተገቢ ነው ትላላችሁ? እስኪ discussion group ላይ እንወያይ


https://t.me/COTMp
Paris France 🇫🇷
ሰናይ ቀን ተመኘን
@etconp
Ties are used to prevent ____?
1. Shear failure
2. Buckling
3. Crushing
4. Torsion
Steel structural systems and the number of storeys

@etconp
This media is not supported in your browser
VIEW IN TELEGRAM
Rapid impact compact

Rapid impact compaction (RIC) is soil improvement technique used to treat loose granular soil and permits shallow spread footing construction. The RIC technique applies impact energy to the ground surface resulting in densification of loosing granular soil to a depth of up to 15 feet. The impact energy is applied using a hydraulic (typically) ram with a drop weight (4-8 tons) falling on an impact plate in designed pattern.


@ETCONp
👉ውቢትዋ ሀዋሳ ከተማ😍
፡
👌የናንተ ከተማም ላኩልን😎
፡
▶️ውብ ምሽት ተመኘን❤️
👉Formwork @ETCONp
.
▶️Formwork is the structure, usually temporary, used to contain poured concrete and to mould it to the required dimensions and support until it is able to support itself. It consists primarily of the face contact material and the bearers that directly support the face contact material. Falsework is the more robust structure that holds temporary formwork in place is used in the temporary condition.
Formwork systems used for concrete frame construction have continued to develop significantly since the early 1990s. The major innovations have focused on on-site efficiency of production, health and safety, and environmental issues, driving the concrete construction industry towards ever-increasing efficiency.
*Different formwork systems provide a wide range of concrete construction solutions that can be chosen to suit the needs of a particular development.
Traditional formwork for concrete construction normally consisted of bespoke solutions requiring skilled craftsmen. This type of formwork often had poor safety features and gave slow rates of construction on-site and huge levels of waste.
The main types of formwork systems in use now are:
● System column formwork

● Horizontal panel

● Slipform

● Jumpform

● Vertical panel systems

● Permanent formwork used in some types of hybrid concrete construction

Still in use, but not as common as previously, are the types of forms that require swinging out from the side of the building. This is due to concerns about moving large objects over unprotected spaces:
● Table form/flying forms

● Tunnel form

The modern formwork systems listed above are mostly modular, which are designed for speed and efficiency. They are designed to provide increased accuracy and minimise waste in construction and most have enhanced health and safety features built-in.
.
http://t.me/COTMp
👉What Does A Construction Manager Do? @ETCONp
.
PART 1
:
▶️A Construction Manager must ensure a project is completed safely, making sure the project runs on time and within the allocated budget allowance.
They typically come into the process quite early on in the project so they can help the client with preliminary planning. They also help with aspects such as selecting an architect and contractor.
.
▶️Duties of a Construction Manager
**The typical functions of a construction manager include:
1. : This involves planning
the entire project and documenting all the jobs that must be completed. It helps allow for budgeting and access to materials that are required Project Management Planning
2. : The expenses of each project must
be efficiently managed throughout the process to ensure
for adjustments for unexpected issues or difficulties Cost Management
3. : A construction manager must
make sure that the contractors employed for the project are completing it to a high-quality standard. Monitoring the process, costs and quality is all highly critical Quality Management
4. : Extensive contracts with the
client are all part of the project construction process.
The contract provisions must be being met to ensure that all parties involved are satisfied Contract Administration
5. : As a construction site can be a
dangerous place with many safety hazards, the building manager must ensure that correct processes are in place to make sure there are no accidents.
The construction manager needs to ensure that the work meets all the legal requirements and Building Regulations
Safety Management Responsibility of Construction Manage
.
👉Who They Manage and How
Construction managers will be responsible for managing individuals in various roles appropriate for the project. Before
any of the actual building work can take place, the plans
must be discussed with the architect, surveyors and buyers.
These types of managers will be required to hire the relevant
staff needed to complete the project to the client’s standard. It is important that all these members of staff are
managed effectively so that the plans for the project can be
fully understood and developed. The construction manager
will need to hire and organise various contractors and
suppliers, and coordinate the subcontractor’s activities.
:
👉What Skills/Qualifications Are Required?
1. Construction managers have an obligation to
communicate with many different people. Therefore,
are essential. people skills
2. Construction managers must be able to their
team to ensure the project is completed to a high quality
motivate
3. Construction Managers need to be
to overcome any obstacles they may face in the
process. creative in problem- solving
4. Having excellent are
also important so that the project can be both effectively
and efficiently plan to run according to schedule
organisational and planning skills
5. are essential. They will need to have
in-depth knowledge of different building methods and
project management computer software. They need
these core competencies to plan the project and keep the
information and finances updated.
Maths and IT skills
6. An of health and safety is fundamental to
maintain a safe work environment.
awareness To become a construction manager, HNC/HND, a foundation degree, or degree in a related area is usually required.
.
▶️What to Expect as a Construction Manager
1. Construction managers are typically employed by
building companies or specialist subcontractors
2. Will be responsible for running all or part of a
construction site
3. Primary person to contact for sub-contractors and public
4. Senior construction managers will often oversee several
projects at once
5. Project meetings must take place at various intervals to
discuss the progress of the project and any issues or
concerns
6. Diaries and daily logs are kept to keep track of activities
taking place on each job site
.
http://t.me/COTMp