Resilience is a form of
1. Creep
2. Shrinkage
3. Strain energy
4. Fatigue
#strength_of_material
#mechanics_of_material
@etconp
1. Creep
2. Shrinkage
3. Strain energy
4. Fatigue
#strength_of_material
#mechanics_of_material
@etconp
Purpose of stirrup
1. It increases the compressive strength of the column (column is compressive member)
2. It can improve the ductility of column
3. Stirrups prevent the buckling of amin reinforcement bar
4. At the time of concreting it prevents the movement of main reinforcement
5. Improve dowel action of column reinforcement
6. In beams stirrups used for lump sum same purpose as in column
7. To provide lateral confinement of longitudinal bars
8. It provide resistance against shear and torsion
9. To hold longitudinal bars during construction
10. It confine the concrete in the core , thus improving ductility and strength
11. It prevents premature buckling of individual bars
👉🏿SHARE IT WITH YOUR FRIENDS
@etconp
1. It increases the compressive strength of the column (column is compressive member)
2. It can improve the ductility of column
3. Stirrups prevent the buckling of amin reinforcement bar
4. At the time of concreting it prevents the movement of main reinforcement
5. Improve dowel action of column reinforcement
6. In beams stirrups used for lump sum same purpose as in column
7. To provide lateral confinement of longitudinal bars
8. It provide resistance against shear and torsion
9. To hold longitudinal bars during construction
10. It confine the concrete in the core , thus improving ductility and strength
11. It prevents premature buckling of individual bars
👉🏿SHARE IT WITH YOUR FRIENDS
@etconp
The difference between main bar and distribution bar
1. Main reinforcement normally used at the bottom of the slab. Distribution bars placed on top of the main bar.
2. Main Reinforcement bars are placed in shorter direction and Distribution bars placed in longer span direction
3. Main Reinforcement Bars are used to transfer the bending moment developed at the bottom of the slab. Distribution Bars are used to hold the slabs on either way and to resist the cracks and shear stress developed at the top.
👉🏿 SHARE IT WITH YOUR FRIENDS
@etconp
1. Main reinforcement normally used at the bottom of the slab. Distribution bars placed on top of the main bar.
2. Main Reinforcement bars are placed in shorter direction and Distribution bars placed in longer span direction
3. Main Reinforcement Bars are used to transfer the bending moment developed at the bottom of the slab. Distribution Bars are used to hold the slabs on either way and to resist the cracks and shear stress developed at the top.
👉🏿 SHARE IT WITH YOUR FRIENDS
@etconp
The advantage and disadvantage of wood formwork
Advantage of wood (timber)formwork
1. Easy handling because it’s light weight
2. Easy to disassemble
3. Damaged parts can be replaced with new one
4. Very Flexible
Disadvantages of timber formwork
1. Can’t be used for long. Have limited reuse. Can only be reused 5 or 6 times
2. If the timber is dry, it will absorb moisture from wet concrete which could weaken the resultant concrete member.
3. Timber with high moisture content (more than 20 % moisture content), wet concrete will shrink & cup leading to open joints & leakage of grout.
አሁኑኑ ለጓደኞቻችሁ SHARE ያድርጉት
@etconp
Advantage of wood (timber)formwork
1. Easy handling because it’s light weight
2. Easy to disassemble
3. Damaged parts can be replaced with new one
4. Very Flexible
Disadvantages of timber formwork
1. Can’t be used for long. Have limited reuse. Can only be reused 5 or 6 times
2. If the timber is dry, it will absorb moisture from wet concrete which could weaken the resultant concrete member.
3. Timber with high moisture content (more than 20 % moisture content), wet concrete will shrink & cup leading to open joints & leakage of grout.
አሁኑኑ ለጓደኞቻችሁ SHARE ያድርጉት
@etconp
Advantage and disadvantage of steel formwork?
Advantage of steel formwork
1. Very strong and able to carry heavy load.
2. Easy to be fixed.
3. Uniform size and surface.
4. Can be used for a very long time.
Disadvantage of steel formwork
1. Limited size or shape
2. Excessive loss of heat.
3. A very smooth surface will be produced which would give problems for finishing process.
👉🏿SHARE IT WITH YOUR FRIENDS
@etconp
Advantage of steel formwork
1. Very strong and able to carry heavy load.
2. Easy to be fixed.
3. Uniform size and surface.
4. Can be used for a very long time.
Disadvantage of steel formwork
1. Limited size or shape
2. Excessive loss of heat.
3. A very smooth surface will be produced which would give problems for finishing process.
👉🏿SHARE IT WITH YOUR FRIENDS
@etconp
CBCPSf (2).ppt
2.1 MB
📚Procurement and contract mgt
lecture 6.pdf
358.7 KB
📚Procurement and contract mgt
Contract Project.pdf
183.4 KB
📚Procurement and contract mgt
lecture 4.pdf
1.9 MB
📚Procurement and contract mgt
lecture 2.pdf
1.6 MB
📚Procurement and contract mgt
Lecture 1.pdf
1.3 MB
📚Procurement and contract mgt
Lecture 5.pdf
572.2 KB
📚Procurement and contract mgt
lecture 3.pdf
1.2 MB
📚Procurement and contract mgt
👆👆👆👆👆👆👆👆👆👆
▶️TODAY TIP ... @ETCONp
:
👉አብዛኛዎቻቹ በጠየቃችሁን Procurement and contract mgt PDF እንካቹ ብለናል፡፡
፡
🅾አሁኑኑ Join በማረግ እና ለጓደኛዎ እና ለሚያቁት ሁሉ ሼር ያድርጉ።
▶️TODAY TIP ... @ETCONp
:
👉አብዛኛዎቻቹ በጠየቃችሁን Procurement and contract mgt PDF እንካቹ ብለናል፡፡
፡
🅾አሁኑኑ Join በማረግ እና ለጓደኛዎ እና ለሚያቁት ሁሉ ሼር ያድርጉ።
Ethio Construction Engineering
Name parts of dumpy levels ! 👆🏾Share it Use the discussion group @etconp Instagram:- https://instagram.com/etconp?igshid=cb6edw9uo55v Facebook:- https://www.facebook.com/115479406977628/posts/129380072254228/?vh=e&d=n
Parts of dumpy levels
1. Telescope 🔭
2. Eye-piece
3. Ray shade
4. Objective End
5. Longitudinal Bubble
6. Focusing screws
7. Foot screws
8. Upper parallel plate
9. Diaphragm adjusting screws
10. Bubble Tube adjusting screws
11. Transverse Bubble tube
12. Foot plate
👉🏿share it with your friends
@etconp
1. Telescope 🔭
2. Eye-piece
3. Ray shade
4. Objective End
5. Longitudinal Bubble
6. Focusing screws
7. Foot screws
8. Upper parallel plate
9. Diaphragm adjusting screws
10. Bubble Tube adjusting screws
11. Transverse Bubble tube
12. Foot plate
👉🏿share it with your friends
@etconp
MILAD TOWER
Milad tower known as the Tehran Tower.
Construction started:- 2000GC
Completed:- 2007GC
Opening:- 7 October 2008GC
Let’s talk about it’s height
Antenna aspire:- 439meter
Roof:- 315meter
Top floor :- 312meter
Technical details
Floor count :- 12
Floor area :- 154,000m2
Lifts/elevators :- 6
Design and construction
Architect:- Mohammed reza hafezi
Contractor:- Boland payeh co.
TEHERAN IRAN 🇮🇷
ውብ ምሽት ተመኘን
كنا نتمنى أمسية جميلة
我們希望有一個美麗的夜晚
हमने एक खूबसूरत शाम की कामना की
We wished a beautiful evening
Мы пожелали прекрасного вечера
ما آرزو کردیم شب زیبا
@ETCONp
Milad tower known as the Tehran Tower.
Construction started:- 2000GC
Completed:- 2007GC
Opening:- 7 October 2008GC
Let’s talk about it’s height
Antenna aspire:- 439meter
Roof:- 315meter
Top floor :- 312meter
Technical details
Floor count :- 12
Floor area :- 154,000m2
Lifts/elevators :- 6
Design and construction
Architect:- Mohammed reza hafezi
Contractor:- Boland payeh co.
TEHERAN IRAN 🇮🇷
ውብ ምሽት ተመኘን
كنا نتمنى أمسية جميلة
我們希望有一個美麗的夜晚
हमने एक खूबसूरत शाम की कामना की
We wished a beautiful evening
Мы пожелали прекрасного вечера
ما آرزو کردیم شب زیبا
@ETCONp