Ethio Construction Engineering
32.3K subscribers
6.28K photos
359 videos
1.99K files
3.34K links
๐Ÿ”จ World Construction Engineering
Latest updates, tips, and tutorials on building, civil engineering, and construction in World.
Learn, build, and grow with us!

๐Ÿ“จ @Philemona7 Or @ETCONpBOT

For Ad:- https://telega.io/c/etconp
Download Telegram
๐Ÿ‘‰PROPERTIES OF HARDENED CONCRETE @COTMp
.
โฉThe following are the properties of concrete in its hardened state, used by the designer during design process of reinforced concrete structure.
1. COMPRESSIVE STRENGTH
*The characteristics strength is defined as
the strength of concrete below which not
more than 5% of the test results are expected to fall. As per IS: 456 concrete
mix always designed for the target strength computed as,
Target strength: Characteristics strength + (1.65 x standard deviation) M20 is the minimum grade of concrete for use in RCC work.
2. TENSILE STRENGTH
*Flexural strength is one measure of the Tensile strength of concrete. In concrete structure one set of visible cracks occur under flexure to compute load factor against cracking .According to IS: 456 the tensile strength of concrete can be computed from the compressive strength using empirical relation given by:
Flexural strength:
f =0.7โˆšfck N/mm
3. MODULUS ELASTICITY
*Modulus of elasticity of concrete which is
significantly influenced by the following
factors.
*Type of the aggregates used, Type of cement and
Mix proportions This property is required for the
computations of deflections of structural
concrete members which forms an important limit state in the design of
concrete members. In the absence of test data, the modulus of elasticity of concrete is normally related to the compressive
strength and is computed by the empirical
relationship recommended by IS: 456-2000
code and is expressed as,
E =5000โˆšfck
*Where E is the short term static modulus of elasticity of concrete expressed in N/mm f is the characteristic compressive
strength of concrete expressed in N/mm .
4. SHRINKAGE OF CONCRETE
*The ingredients of concrete and environmental conditions like temperature and humidity influence the total shrinkage of concrete. Water content in concrete significantly affects the shrinkage. The IS: 456-2000 recommends the total shrinkage
strain as 0.0003 in the absence of test data. Drying shrinkage in plain concrete may result in surface cracks. Shrinkage of concrete also influences the deflections of reinforced concrete members.
5. CREEP OF CONCRETE
*The inelastic time dependent strain
developed in a concrete ember under sustained loading is referred to as creep of concrete. Creep of concrete is influenced
by following factors.
Cement content,
W/C ratio, Temperature and humidity, Size of structural element,
*Type of loading and period of loading. In the absence of reliable experimental data, the creep coefficient is expressed as the ratio of ultimate creep strain/elastic strain at various ages of loading as recommended by IS: 456-2000 are given
below.
*Age at Loading Creep Coefficient
7 days 2.2
28 days 1.6
1 year 1.1
*Creep of concrete significantly affects the deflections of reinforced concrete flexural
members. Higher creep coefficient results
in large deflections. The value of creep coefficient is useful in the computation of time dependent deflections in reinforced concrete members.
6. COEFFICIENT OF THERMAL EXPANSION
*The coefficient of thermal expansion of concrete, influenced mainly by the type of aggregate used in concrete is required for
the design of structures like chimneys, water tanks, silos etc.
.
๐Ÿ‘‡๐Ÿ‘‡๐Ÿ‘‡๐Ÿ‘‡๐Ÿ‘‡
Join for more updates via the link below;
t.me/COTMp
๐Ÿ‘†๐Ÿ‘†๐Ÿ‘†๐Ÿ‘†๐Ÿ‘†
โšก แŠ แˆแŠ‘แŠ‘ Join แ‰ แˆ›แˆจแŒ แŠฅแŠ“ แˆˆแŒ“แ‹ฐแŠ›แ‹Ž แŠฅแŠ“ แˆˆแˆšแ‹ซแ‰แ‰ต แˆแˆ‰ แˆผแˆญ แ‹ซแ‹ตแˆญแŒ‰แข
โค1๐Ÿ‘1
How to measure sand, Aggregate in truck
๐Ÿ‘‰ แ‹จแŠ แˆแˆญแŠ• แ‹จแˆ˜แˆธแŠจแˆ แŠ แ‰…แˆ (BEARING CAPACITY) แŠฅแŠ•แ‹ดแ‰ต แŠฅแŠ•แŒจแˆแˆญ??...
.
* แˆถแˆตแ‰ต แŠ แ‹ญแАแ‰ต แ‹จแŠ แˆแˆญแŠ• แ‹จแˆ˜แˆธแŠจแˆ แŠ แ‰…แˆ แˆ›แˆตแ‰ฐแŠซแŠจแ‹ซ แ‰ดแŠญแŠ’แŠฎแ‰ฝ แŠ แˆ‰ - mechanical, chemical & other stabilization techniques
.
A) แˆœแŠซแŠ’แŠซแˆ แ‹แˆตแŒฅ :-
.
1. Compaction - แŠ แˆแˆฉแŠ• แˆตแŠ•แŒ แ‰€แŒฅแ‰€แ‹ density/ unit
weight แ‹ญแŒจแˆแˆซแˆ แ‹ซ แˆ›แˆˆแ‰ต แ‹ฐแŒแˆž แŠ แˆแˆญแŠ• แ‹จแˆ˜แˆธแŠจแˆ แŠ แ‰…แˆ แŒจแˆ˜แˆจ แˆ›แˆˆแ‰ต แАแ‹::
.
2. Excavation and Replacement โ€“ expansive soil แŠจแˆ†แА แ‹ˆแ‹ญแˆ แˆŒแˆ‹ แŠ แˆตแ‰ธแŒ‹แˆช แŠ แˆแˆญ แŠจแˆ†แА แ‹ญแˆ…แŠ• แˆ˜แŒ แ‰€แˆ แŠฅแŠ•แ‰ฝแˆ‹แˆˆแŠ•
.
3. Mixing of Different Soils - แˆณแ‹ญแ‰ณแ‰ฝแŠ• แˆ‹แ‹ญ แ‹ซแˆˆแ‹ แŠ แˆแˆญ
coarse แ‹ˆแ‹ญแˆ fine แ‰ฅแ‰ป แŠจแˆ†แА แ‹ˆแ‹ญแˆ แ‹ฐแŒแˆž แŠ แˆแˆฉ แŠ แŠ•แ‹ต แŠ แ‹ญแАแ‰ต
แ‰ฅแ‰ป แ€แ‰ฃแ‹ญ แŠซแˆˆแ‹ แŠจแ‰ฐแˆˆแ‹ซแ‹ฉ แŠ แˆแˆฎแ‰ฝ แŒ‹แˆญ แ‰ แˆ˜แ‹ฐแ‰ฃแˆˆแ‰… แ‹จแ‰ฐแˆปแˆˆ แ‹จแŠ แˆแˆญ
แ€แ‰ฃแ‹ญ แˆ›แŒแŠ˜แ‰ต แŠฅแŠ•แ‰ฝแˆ‹แˆˆแŠ•
.
B) แŠฌแˆšแŠซแˆ :-
.
1. Lime stabilization - แ‹ญแˆ…แŠ•แŠ• แ‹จแˆแŠ•แŒ แ‰€แˆ˜แ‹ แ‰ แŠ แ‰ฅแ‹›แŠ›แ‹
แˆˆexpansive soil แАแ‹แกแก แŠ แˆแˆฉแŠ• แŠจ Lime แŒ‹แˆญ แ‰ แˆ˜แ‹ฐแ‰ฃแˆˆแ‰…
plasticity แˆ˜แ‰€แАแˆต แŠฅแŠ•แ‰ฝแˆ‹แˆˆแŠ•แกแก แ‹จlime แˆ˜แŒ แŠ‘ แŠจแˆšแ‹ซแˆตแˆแˆแŒˆแ‹
แ‰ แˆ‹แ‹ญ แŠจแ‰ แ‹› แŒแŠ• B.C. แ‹ญแ‰€แŠ•แˆณแˆแกแก
.
2. Cement stabilization - แˆฒแˆšแŠ•แ‰ถแŠ• แŠจแŠ แˆแˆญ แŒ‹แˆญ แ‰ แˆ˜แ‹ฐแ‰ฃแˆˆแ‰…
แ‹จแ‰ฐแˆปแˆˆ แ‹แŒคแ‰ตแŠ• แ‹จแˆแŠ“แŒˆแŠแ‰ แ‰ต แˆ˜แŠ•แŒˆแ‹ต แАแ‹แกแก concrete
pavement แˆตแˆญ แˆ˜แŒ แ‰€แˆ แŠฅแŠ•แ‰ฝแˆ‹แˆˆแŠ• แ‰ แŠ แ‰ฅแ‹›แŠ›แ‹ แˆˆแŠ แ‹จแˆญ
แˆ˜แŠ•แŒˆแ‹ถแ‰ฝ แค แˆˆแŠ แ‹แˆซ แŒŽแ‹ณแŠ“แ‹Žแ‰ฝ แค แŒแ‹ตแ‰ฆแ‰ฝแŠ• แŠจแˆฝแˆญแˆธแˆซ แˆˆแˆ˜แŠจแˆ‹แŠจแˆ
แ‹ˆ.แ‹˜.แ‰ฐ. แˆ˜แŒ แ‰€แˆ แŠฅแŠ•แ‰ฝแˆ‹แˆˆแŠ•แกแก
.
3. Asphalt stabilization - แŠ แˆตแ“แˆแ‰ตแŠ• แŠจแŠ แˆแˆญ แŒ‹แˆญ แ‰ แˆ˜แ‹ฐแ‰ฃแˆˆแ‰…
แ‹จแ‰ฐแˆปแˆˆ แ‹แŒคแ‰ตแŠ• แ‹จแˆแŠ“แŒˆแŠแ‰ แ‰ต แ‹˜แ‹ด แАแ‹ แ‰ แ‰ฐแˆˆแ‹ญแˆ แˆˆcohesive
แŠ แˆแˆฎแ‰ฝแกแก แŠ แˆแˆฉแŠ• water proof แ‰ แˆ›แ‹ตแˆจแŒแŠ“ แ‹แˆƒแˆ›แАแ‰ตแŠ• แ‰ แˆ˜แ‰€แАแˆต
B. CแŠ• แˆ˜แŒจแˆ˜แˆญ แŠฅแŠ•แ‰ฝแˆ‹แˆˆแŠ•แกแก แ‰ แŠ แ‰ฅแ‹›แŠ›แ‹ แ‹ญแˆ…แŠ•แŠ• แ‹ตแ‰ฅแˆแ‰…
แˆˆแˆ˜แŠ•แŒˆแ‹ถแ‰ฝ แŠฅแŠ•แ‹ฐ base course แˆ˜แŒ แ‰€แˆ แŠฅแŠ•แ‰ฝแˆ‹แˆˆแŠ•แกแก
.
.
C) แˆŒแˆŽแ‰ฝ แ‹จแŠ แˆแˆญแŠ• แ‰ฃแˆ…แˆช แˆ›แˆตแ‰ฐแŠซแŠจแ‹ซ แˆ˜แŠ•แŒˆแ‹ถแ‰ฝ:-
.
1. Drainage - แ“แ‹ญแ–แ‰ฝแŠ• แŠ แˆแˆญ แ‹แˆตแŒฅ แ‰ แˆ˜แ‰…แ‰ แˆญ แ‹ˆแ‹ญแˆ
แŒ‰แ‹ตแŒ“แ‹ถแ‰ฝแŠ• แ‰ แˆ˜แŒ แ‰€แˆ ground water แ‹จแˆแŠ•แ‰†แŒฃแŒ แˆญแ‰ แ‰ต แАแ‹
.
2. Precompression - แŒแŠ•แ‰ฃแ‰ณ แŠจแˆ˜แŒ€แˆ˜แˆซแ‰ฝแŠ• แ‰ แŠแ‰ต แŠ แˆแˆฉ แˆ‹แ‹ญ
แˆŽแ‹ต แ‰ แˆ˜แŒซแŠ• แŠฎแˆแ“แŠญแ‰ต แ‹จแˆแŠ“แ‹ฐแˆญแŒแ‰ แ‰ต แ‹˜แ‹ด แАแ‹
.
3. Dynamic Stabilization
.
แˆ€) Blasting - แ‰ฆแˆแ‰ฅ แ‹ˆแ‹ฐแ‹แˆตแŒฅ แ‰ แˆ˜แ‰…แ‰ แˆญ แ‰ แแŠ•แ‹ณแ‰ณแ‹ แŠ แˆแˆฉ แ‹ญแŒ แ‰€แŒ แ‰ƒแˆ::
.
แˆˆ) Compaction Piles - แ“แ‹ญแˆŽแ‰ฝแŠ• แ‹ˆแ‹ฐแ‹แˆตแŒฅ แ‰ แˆ›แˆตแŒˆแ‰ฃแ‰ต
แŠ แˆแˆฉ แ‹ˆแ‹ฐ แŒŽแŠ• แŠฅแŠ•แ‹ฒแˆธแˆฝแŠ“ แŠฅแŠ•แ‹ฒแŒ แ‰€แŒ แ‰… แˆ›แ‹ตแˆจแŒ แ‹ญแ‰ปแˆ‹แˆแกแก
แ“แ‹ญแˆ‰แŠ• แˆตแŠ“แˆตแ‹ˆแŒฃแ‹แˆ แ‰ แ‰ฐแ‰ฆแˆจแ‰ฆแˆจแ‹ แŒ‰แ‹ตแŒ“แ‹ต แ‹แˆตแŒฅ แ‹จแ‰ฐแˆปแˆˆ แŠ แˆแˆญ แ‰ แˆ›แˆตแŒˆแ‰ฃแ‰ต แ‹จแŠ แˆแˆญแŠ• แ‹จแˆ˜แˆธแŠจแˆ แŠ แ‰…แˆ แˆ›แˆตแ‰ฐแŠซแŠจแˆ แŠฅแŠ•แ‰ฝแˆ‹แˆˆแŠ•แกแก
.
4. Injection And Grouting - แŠ แˆแˆฉแŠ• แ‰ แˆฒแˆšแŠ•แ‰ถ แ‹ˆแ‹ญแˆ
แ‰ แ‰ฐแˆˆแ‹ซแ‹ฉ chemical แ‹แˆ…แ‹ถแ‰ฝ แ‰ pressure แ‰ แˆ˜แˆแ‰ณแ‰ต ground
water แŠ“ settlement แˆ˜แ‰†แŒฃแŒ แˆญ แŠฅแŠ•แ‰ฝแˆ‹แˆˆแŠ•แกแก
.
แ‹จแ‰ฐแˆปแˆˆแ‹แŠ• แ‹˜แ‹ด แˆˆแˆ˜แˆแˆจแŒฅ แ‹จแŠ แˆแˆฉแŠ•แŠ“ แ‹จแŠ แŠซแ‰ฃแ‰ขแ‹แŠ• แˆแŠ”แ‰ณ แค
แŠขแŠฎแŠ–แˆš แค แˆดแแ‰ฒแŠ“ แ‹จแˆ˜แˆณแˆฐแˆ‰แ‰ตแŠ• แАแŒˆแˆฎแ‰ฝ แˆ›แŒคแŠ• แŠ แˆˆแ‰ฅแŠ•แกแก
.
๐Ÿ‘‰FOR MORE UPDATED CONSTRUCTION INFO JOIN US HERE ๐Ÿ‘‡
http://t.me/COTMp
แ‰ แ‰ แŒ€แ‰ต แ‹“แˆ˜แ‰ฑ แ‰ แˆ˜แŠ•แŒแˆตแ‰ต แŒแŠ•แ‰ฃแ‰ณแ‹Žแ‰ฝ แˆ‹แ‹ญ แˆˆแ‹œแŒŽแ‰ฝ แ‹จแˆตแˆซ แ‹•แ‹ตแˆ แŠฅแŠ“ แ‹จแŒˆแ‰ แ‹ซ แ‰ตแˆตแˆตแˆญ แŠฅแŠ•แ‹ฐแˆšแˆแŒ แˆญ แ‰ฐแŒˆแˆˆแ€แกแก
แ‰ แ‰ฐแ‹ซแ‹˜แ‹ แ‰ แŒ€แ‰ต แ‹“แˆ˜แ‰ต แˆˆ 2000 แŠฎแŠ•แ‰ตแˆซแŠญแ‰ฐแˆฎแ‰ฝแŠ“ แˆˆ 2000 แŠ แˆ›แŠซแˆช แ‹ตแˆญแŒ…แ‰ถแ‰ฝ แ‰ แˆ˜แŠ•แŒแˆฅแ‰ต แŒแŠ•แ‰ฃแ‰ณแ‹Žแ‰ฝ แˆ‹แ‹ญ แ‰ แ‰‹แˆšแАแ‰ตแŠ“ แ‰ แŒŠแ‹œแ‹ซแ‹ŠแАแ‰ต แ‰…แŒฅแˆญ แˆˆแˆ˜แˆแ€แˆ แŠฅแŠ•แ‹ฐแ‰ณแˆฐแ‰  แ‰ฐแŒˆแˆแ‡แˆแกแก
แ‰ แ‰ฐแŒจแˆ›แˆชแˆ 16,000 แ‹จแŒแŠ•แ‰ฃแ‰ณ แ‰ฃแˆˆแˆžแ‹ซแ‹Žแ‰ฝแŠ• แ‰ แˆ˜แˆ˜แ‹แŒˆแ‰ฅ แ‰ แŒแŠ•แ‰ฃแ‰ณ แˆณแ‹ญแ‰ถแ‰ฝ แˆ‹แ‹ญ แ‰ แŒŠแ‹œแ‹ซแ‹ŠแАแ‰ตแŠ“ แ‰ แ‰‹แˆšแАแ‰ต แŠฅแŠ•แ‹ฒแˆฐแˆฉ แ‹ญแ‹ฐแˆจแŒ‹แˆ แ‹จแ‰ฐแ‰ฃแˆˆ แˆฒแˆ†แŠ• แ‰ แˆšแˆแŒ แˆฉแ‰ต แ‹จแˆตแˆซ แ‹•แ‹ตแˆŽแ‰ฝแˆ แ‹จ 1 แ‰ขแˆŠแ‹ฎแŠ• แ‰ฅแˆญ แ‹จแŒˆแ‰ แ‹ซ แ‰ตแˆตแˆตแˆญ แˆˆแˆ˜แแŒ แˆญ แˆ›แ‰€แ‹ฑแŠ• แ‹จแ‰ขแˆฎแ‹ แ‹จ 2012 แ‹•แ‰…แ‹ต แ‹ซแˆ˜แˆˆแŠญแ‰ณแˆแกแก
แŠ /แŠ /แŠจ/แŠ /แŠฎแŠ•แˆตแ‰ตแˆซแŠญแˆฝแŠ• แ‰ขแˆฎ (แˆ˜แˆตแŠจแˆจแˆ 6/2012 แ‹“/แˆ
Share @cotmp
๐Ÿ‘‰COMMON CONCRETE PROBLEMS AND THEIR
PREVENTION @COTMp
.
โฉThere are many problems we might be facing during and after concreting.
*To produce high quality
concrete we must take some precautions to avoid
those common problems during concreting. In this
article, we will discuss on common concrete
problems and how to prevent them.
A) BLEEDING:
Bleeding refers to as a tendency of water to appear on the top surface of concrete after finishing. Due to bleeding some measure of water (with sand particles and other cementing materials) appears at the surface of the concrete.
*Following precautions should be taken to reduce
bleeding in concrete.
1. Design the mix appropriately.
2. Include least water content in the mix.
3. Use greater amount of cement content.
4. Use greater amount of fine particles.
5. Utilize a little measure of air entraining
admixture.
B) SEGREGATION:
Segregation means separation of coarse aggregates from the concrete surface due to poor compaction.
It is generally seen in the plastic stage of concrete.
As a result honeycomb, laitance, scaling, porous
layer, bond failure etc. can be formed in concrete.
Following precautions should be adopted to prevent segregation in concrete.
1. Design the mix appropriately.
2. Never use excessive water content.
3. Take care of handling, placing, and proper
compaction of concrete.
4. Do not allow the concrete to be dropped from more heights.
5. Use air entraining admixture.
6. Keep the formwork to be watertight.
C) LAITANCE:
The appearance of cement-sand particles on the
surface of freshly placed concrete is known as
laitance. It is mainly occurred due to the bad effect of bleeding and segregation of concrete. The bond between subsequent layers of concrete becomes
weaker and as a result, laitance is developed.
Following precautions can be taken to stop the
occurrence of laitance in concrete.
1. Clay, dust, silt content etc should be removed
before mixing the concrete.
2. Water-cement ratio should be maintained
properly.
3. Water should not be sprayed on the concrete
surface during finishing work.
4. Use well graded fine aggregates in the mix.
5. Add little amount of water reducing admixture in the concrete mix.
D) SCALING:
Scaling is the physical deterioration of concrete in
which the surface layer of concrete broke down,
pitted or flaked away. Due to this effect concrete
surface becomes worse. Scaling can be prevented
by taking same precautions adopted for laitance.
E) PLASTIC SHRINKAGE CRACKS:
When the evaporation rate of water mixed in the
concrete is greater than the bleed water of concrete,
plastic shrinkage cracks are developed on the
surface of the concrete. Basically, this type of
cracks occurs in very hot climate.
F) DUSTING:
Dusting can be prevented by taking following
precautions.
1. Maintain a suitable water/cement ratio in the
concrete.
2. Utilize dust free aggregates in the mix.
3. Guarantee appropriate hydration of concrete.
4. Avoid early surface finishing of concrete.
.
โšก แŠ แˆแŠ‘แŠ‘ Join แ‰ แˆ›แˆจแŒ แŠฅแŠ“ แˆˆแŒ“แ‹ฐแŠ›แ‹Ž แŠฅแŠ“ แˆˆแˆšแ‹ซแ‰แ‰ต แˆแˆ‰ แˆผแˆญ แ‹ซแ‹ตแˆญแŒ‰แข
โค1
๐Ÿ‘‰แ‹แ‹ต แ‹จ @COTMp แ‰ฐแŠจแ‰ณแ‹ฎแ‰ฝ แŠฅแŠ•แ‹ดแ‰ต แŠ“แ‰ฝแˆ แ‹›แˆฌ แ‹ฐแˆž แŠจแ‰ณแ‰ฝ แ‹ซแˆ‰ แŒฅแ‹ซแ‰„แ‹Žแ‰ฝ แŠฃแ‹˜แŒ‹แŒ…แ‰ฐแŠ“แˆ แˆ˜แˆแˆณแ‰น Discussion แˆ‹แ‹ญ แ‰ แˆšแŒˆแŠแ‹ Group แˆ‹แ‹ญ แŠฃแˆตแ‰€แˆแŒกแˆแŠ• แˆ›แˆˆแ‰ตแˆ แ‰ แ‹šแˆ…..
โžก @COTMp แ‹ญแˆ˜แˆแˆฑ แŠฅแŠ“ แŠฅแŠ•แˆ›แˆ›แˆญแข
.
โฉtry these questions...
.
1. List at least four factors that affect design of
concrete mix?
2. Write procedures of laying of rising main pipes in a water supply project.
3. Estimate the quantities of brickwork and
plastering required in a wall 4 m long, 3 m high
and 30 cm thick.
*Calculate also the cost if the rate of brickwork is
320.00birr per cu m and of plastering is 8.50 birr
per sq m.
4. Given 10m3 Concrete C โ€“ 15 Mechanical mixes
with mix ratio 1:2:4. Assuming that 30% shrinkage and 5% wastage and also take density of cement as 1400kg/m3.
Calculate the amount of cement required to make
10m3 of 1:2:4 concrete in kilograms.
*Calculate the volume of sand in cubic meter .
*Calculate the volume of gravel (crushed stone) in
cubic meter.
.
โšก แŠ แˆแŠ‘แŠ‘ Join แ‰ แˆ›แˆจแŒ แŠฅแŠ“ แˆˆแŒ“แ‹ฐแŠ›แ‹Ž แŠฅแŠ“ แˆˆแˆšแ‹ซแ‰แ‰ต แˆแˆ‰ แˆผแˆญ แ‹ซแ‹ตแˆญแŒ‰แข แŠฅแŠ“แˆ˜แˆฐแŒแŠ“แˆˆแŠ•๐Ÿ˜
๐Ÿ‘†๐Ÿ‘†๐Ÿ‘†แˆธแŒˆแˆญ แŠฃแ‹ฑ แŒˆแАแ‰ต๐Ÿ˜
.
๐Ÿšฉแ‹แ‰ฅ แˆˆแˆŠแ‰ต แ‰ฐแˆ˜แŠแŠ• @COTMp
๐Ÿ‘‰แ‹แ‹ต แ‹จ @COTMp แ‰ฐแŠจแ‰ณแ‹ฎแ‰ฝ แŠฅแŠ•แ‹ดแ‰ต แŠ“แ‰ฝแˆ แ‹›แˆฌ แ‹ฐแˆž แˆตแˆˆ แŠซแˆซแŠญแ‰ฐแˆญแˆตแ‰ฒแŠญ แŠฅแˆตแ‰ตแˆฌแŠ•แŒแ‹ แŠฅแŠ“ แŠซแˆซแŠญแ‰ฐแˆญแˆตแ‰ฒแŠญ แˆŽแ‹ต แˆแŠ•แ‹ตแŠ•แАแ‹ แŠฃแ‰ฅแˆจแŠ• แŠฅแŠ•แ‹ญแข
.
โžกCharacteristic Strength-แˆ›แˆˆแ‰ต แ‹จแŠฎแŠ•แŠญแˆชแ‰ต แ‹ˆแ‹ญแˆ แ‹จแ‰ฅแˆจแ‰ต แ‰ดแˆตแ‰ต แŠ แ‹ตแˆญแŒˆแŠ• แˆˆแŠฅแ‹ซแŠ•แ‹ณแŠ•แ‹ฑ แ‰ดแˆตแ‰ต แŠซแŒˆแŠ˜แŠ“แ‰ธแ‹ แ‹แŒคแ‰ถแ‰ฝ แ‹แˆตแŒฅ แŠ แˆแˆตแ‰ต แแˆญแˆฐแŠ•แ‰ฑแŠ• แ‰ฅแ‰ป แ‹จแˆšแ‰ แˆแŒฅ แ‹แŒคแ‰ต แАแ‹ แŠซ - แŠฅแˆตแ‰ตแˆฌแŠ•แŒแ‹ แˆ›แˆˆแ‰ตแกแก แ‹ˆแ‹ญแˆ แ‹ฐแŒแˆž 95 แแˆญแˆฐแŠ•แ‰ฑ แ‹จแ‰ดแˆตแ‰ต แ‹แŒคแ‰ถแ‰ฝ แ‹จแˆšแ‰ แˆแŒกแ‰ต แ‹แŒคแ‰ต แАแ‹แกแก แ‰ตแŠ•แˆน แŠฅแˆตแ‰ตแˆฌแŠ•แŒแ‹ แАแ‹ แˆ›แˆˆแ‰ตแ‹ญแ‰ปแˆ‹แˆแกแก
โฉแŽแˆญแˆ™แˆ‹แ‹แˆ- [ fc = (mean strength)- 1.64(standard
deviation) ]
.
โžกCharacteristic Load-แˆ›แˆˆแ‰ต แˆ…แŠ•แƒแ‹ แ‰ แ‹˜แˆ˜แŠ‘ แ‹ซแŒ‹แŒฅแˆ˜แ‹‹แˆ แ‰ฐแ‰ฅแˆŽ แŠจแˆšแ‰ณแˆฐแ‰ แ‹ แ‹แˆตแŒฅ แŠ แˆแˆตแ‰ต แแˆญแˆฐแŠ•แ‰ฑ แ‰ฅแ‰ป แ‹จแˆšแ‰ แˆแŒกแ‰ต load แАแ‹แกแก
โฉแŽแˆญแˆ™แˆ‹แ‹แˆ - [ fk = (mean load) + 1.64(standard
deviation) ]
.
*แŠซแˆซแŠญแ‰ฐแˆญแˆตแ‰ฒแŠญ แˆŽแ‹ฑแŠ•แˆ แˆ†แА แŠฅแˆตแ‰ตแˆฌแŠ•แŒแ‹™แŠ• แˆตแŠ•แ‹ˆแˆตแ‹ต แ‰ แˆแˆˆแ‰ฑแˆ แ‰ แŠฉแˆ แˆ…แŠ•แƒแ‹ แˆดแ แАแ‹:: แˆแŠญแŠ•แ‹ซแ‰ฑแˆ แŠฅแˆตแ‰ตแˆฌแŠ•แŒแ‹™แŠ• แˆตแŠ•แ‹ˆแˆตแ‹ต แˆ…แŠ•แƒแ‹ แ‰ตแŠ•แˆฝแ‹ฌ แŠฅแˆตแ‰ตแˆฌแŠ•แŒแ‹ แŠ แˆˆแ‹ แ‰ฅแˆˆแŠ• แАแ‹ แ‹จแˆแŠ•แ‹ˆแˆตแ‹ฐแ‹...
*แˆŽแ‹ต แˆตแŠ•แ‹ˆแˆตแ‹ต แ‹ฐแŒแˆž แˆˆแ‰ตแˆแ‰ แˆŽแ‹ต แАแ‹ แ‹จแˆแŠ•แ‹ฐแ‹แАแ‹..
แแˆฎแ‰ฃแ‰ฅแˆŠแ‰ฒ แ“แˆซแˆœแ‰ตแˆฎแ‰นแŠ• ( แˆšแŠ•แŠ“ แˆตแ‰ณแŠ•แ‹ณแˆญแ‹ต แ‹ฒแ‰ญแ‹ฌแˆฝแŠ•) แ‹จแˆแŠ•แ‹ˆแˆตแ‹ฐแ‹ แŠจแ‰ดแˆตแ‰ต แˆชแ‹›แˆแ‰ถแ‰ฝ แ‹แˆตแŒฅ แАแ‹แกแก
.
โšก แŠ แˆแŠ‘แŠ‘ Join แ‰ แˆ›แˆจแŒ แŠฅแŠ“ แˆˆแŒ“แ‹ฐแŠ›แ‹Ž แŠฅแŠ“ แˆˆแˆšแ‹ซแ‰แ‰ต แˆแˆ‰ แˆผแˆญ แ‹ซแ‹ตแˆญแŒ‰แข แŠฅแŠ“แˆ˜แˆฐแŒแŠ“แˆˆแŠ•๐Ÿ˜
๐Ÿ‘‰แ‹›แˆฌ แ‹ฐแˆž แˆตแˆˆ แ‹จ cement แŠฃแ‹ญแАแ‰ถแ‰ฝ แŠฅแŠ•แˆ›แˆ›แˆญ @COTMp
.
โฉThere are various types of cement used in concrete construction. Each type of cement has its own properties, uses and advantages based on composition materials used during its manufacture.
โฉ13 Types of Cement and their Uses๐Ÿ‘‡
1. Ordinary Portland Cement (OPC)
2. Portland Pozzolana Cement (PPC)
3. Rapid Hardening Cement
4. Quick setting cement
5. Low Heat Cement
6. Sulphates resisting cement
7. Blast Furnace Slag Cement
8. High Alumina Cement
9. White Cement
10. Coloured cement
11. Air Entraining Cement
12. Expansive cement
13. Hydrographic cement
.
โ–ถ1. Ordinary Portland Cement (OPC)
Ordinary Portland cement is the most widely used type of cement which is
suitable for all general concrete construction.
It is most widely produced
and used type of cement around the world with annual global production of around 3.8 million cubic meters per year.
*This cement is suitable for all type of concrete construction.
โ–ถ2. Portland Pozzolana Cement (PPC)
*Portland pozzolana cement is prepared by
grinding pozzolanic clinker with Portland
cement. It is also produced by adding pozzolana with the addition of gypsum or
calcium sulfate or by intimately and uniformly blending portland cement and fine pozzolana.
*This cement has high resistance to various
chemical attacks on concrete compared
with ordinary portland cement and thus it
is widely used. It is used in marine structures, sewage works, sewage works
and for laying concrete under water such
as bridges, piers, dams and mass concrete
works etc.
โ–ถ3. Rapid Hardening Cement
*Rapid hardening cement attains high strength in early days it is used in
concrete where formworks are removed at an early stage and is similar to ordinary portland cement (OPC). This cement has
increased lime content and contains higher c3s content and finer grinding which gives greater strength development
than OPC at an early stage.
*The strength of rapid hardening cement at
the 3 days is similar to 7 days strength of
OPC with the same water-cement ratio.
Thus, advantage of this cement is that
formwork can be removed earlier which increases the rate of construction and
decreases cost of construction by saving
formwork cost.
*Rapid hardening cement is used in prefabricated concrete construction, road works, etc.
โ–ถ4. Quick setting cement
The difference between the quick setting cement and rapid hardening cement is
that quick setting cement sets earlier while rate of gain of strength is similar to Ordinary Portland Cement, while rapid
hardening cement gains strength quickly.
Form works in both cases can be removed
earlier.
*Quick setting cement is used where works is to be completed in very short period and for concreting in static or running water.
โ–ถ5. Low Heat Cement
*Low heat cement is prepared by maintaining the percentage of tricalcium Almunate below 6% by increasing the proportion of C2S. This makes the concrete to produce low heat of hydration and thus is used in mass concrete
*construction like gravity dams, as the low heat of hydration prevents the cracking of concrete due to heat.
*This cement has increased power against sulphates and is less reactive and initial
setting time is greater than OPC.
โ–ถ6. Sulphates Resisting Cement
*Sulfate resisting cement is used to reduce the risk of sulphate attack on concrete and thus is used in construction of foundations where soil has high sulphate content.
*This cement has reduced
contents of C3A and C4AF.
Sulfate resisting cement is used in construction exposed to severe sulphate
action by water and soil in places like canals linings, culverts, retaining walls, siphons etc. ...
.
โžกแ‹ญแ‰€แŒฅแˆ‹แˆ ...
.
โšก แŠ แˆแŠ‘แŠ‘ Join แ‰ แˆ›แˆจแŒ แŠฅแŠ“ แˆˆแŒ“แ‹ฐแŠ›แ‹Ž แŠฅแŠ“ แˆˆแˆšแ‹ซแ‰แ‰ต แˆแˆ‰ แˆผแˆญ แ‹ซแ‹ตแˆญแŒ‰แข
๐Ÿ‘†๐Ÿ‘†๐Ÿ‘† แŠจ แ‰…แ‹ตแˆ แ‹จแ‰€แŒ แˆˆ @COTMp
.
โ–ถ7. Blast Furnace Slag Cement
*Blast furnace slag cement is obtained by grinding the clinkers with about 60% slag and resembles more or less in properties of Portland cement. It can be used for works economic considerations is predominant.
โ–ถ8. High Alumina Cement
*High alumina cement is obtained by melting mixture of bauxite and lime and grinding with the clinker.
It is a rapid hardening cement with initial and final setting time of about 3.5 and 5 hours respectively.
*The compressive strength of this cement is very high and more workable than
ordinary portland cement and is used in
*works where concrete is subjected to high temperatures, frost, and acidic action.
โ–ถ9. White Cement
*It is prepared from raw materials free from Iron oxide and is a type of ordinary portland cement which is white in color.
*It is costlier and is used for architectural purposes such as precast curtain wall and facing panels, terrazzo surface etc. and for interior and exterior
decorative work like external renderings of buildings, facing slabs, floorings, ornamental concrete products, paths of gardens, swimming pools etc.
โ–ถ10. Colored cement
*It is produced by mixing 5- 10% mineral pigments with ordinary cement. They are widely used for decorative works in floors.
โ–ถ11. Air Entraining Cement
*Air entraining cement is produced by adding indigenous air entraining agents such as resins, glues, sodium salts of
sulphates etc. during the grinding of clinker.
*This type of cement is especially suited to improve the workability with smaller water cement ratio and to improve frost
resistance of concrete.
โ–ถ12. Expansive Cement
*Expansive cement expands slightly with time and does not shrink during and after the time of hardening.
*This cement is mainly used for grouting anchor bolts and prestressed concrete ducts.
โ–ถ13. Hydrographic cement
*Hydrographic cement is prepared by mixing water repelling chemicals and has high workability and strength.
*It has the property of repelling water and is unaffected during monsoon or rains. Hydrophobic cement is mainly used for the construction of water structures such dams, water tanks, spillways, water retaining structures etc.
.
โšก แŠ แˆแŠ‘แŠ‘ Join แ‰ แˆ›แˆจแŒ แŠฅแŠ“ แˆˆแŒ“แ‹ฐแŠ›แ‹Ž แŠฅแŠ“ แˆˆแˆšแ‹ซแ‰แ‰ต แˆแˆ‰ แˆผแˆญ แ‹ซแ‹ตแˆญแŒ‰แข
โค1
๐Ÿ‘‰แˆธแŒˆแˆญ แŠฃแ‹ฑ แŒˆแАแ‰ต๐Ÿ˜
.
๐Ÿšฉแ‹แ‰ฅ แˆˆแˆŠแ‰ต แ‰ฐแˆ˜แŠแŠ• @COTMp
๐Ÿ‘‰Today Tip @COTMp
.
โžก แ‰  แŠ แŠ•แ‹ต แˆœแ‰ตแˆญ แŠซแˆฌ แˆแŠ• แ‹ซแˆ…แˆ แ‰ฅแˆŽแŠฌแ‰ต แŠฅแŠ•แŒ แ‰€แˆ›แˆˆแŠ•??
โฉแ‹จแ‰ฅแˆŽแŠฌแ‰ต๐Ÿ‘‡
โ–ถ แˆตแ‹แ‰ต =0.4แˆœ
โ–ถแ‰แˆ˜แ‰ต =0.2แˆœ
=1/(0.4*0.2)
=12.5
=~13
๐Ÿšฉแˆตแˆˆแ‹šแˆ… แ‰  แŠ แŠ•แ‹ต แˆœแ‰ตแˆญ แŠซแˆฌ 13 แแˆฌ แ‰ฅแˆŽแŠฌแ‰ต แŠฅแŠ•แŒ แ‰€แˆ›แˆˆแŠ• แˆ›แˆˆแ‰ต แАแ‹แข

Join on telegram:- @etconp

Follow us on Instagram:- @etconp
๐Ÿ‘‰Today Tip 2 @COTMp
.
โžก Question - แŠ แŠ•แ‹ต G+22 แ‹จแˆ†แА แˆ…แŠ•แƒ แŠฅแŠ•แ‹ดแ‰ต แАแ‹ แˆแŠ•แˆ แŠ แ‹ญแАแ‰ต Column แˆณแŠ•แŒ แ‰€แˆ แˆ˜แŒˆแŠ•แ‰ฃแ‰ต แ‹จแˆแŠ•แ‰ฝแˆˆแ‹??
.
โžกAnswer - Shear wall แ‰ แˆ˜แŒ แ‰€แˆ
.
โžก Question - แŠจ36 แˆš.แˆœ แ‰ แˆ‹แ‹ญ แˆˆแˆ†แŠ‘ แŒแˆฎแ‹Žแ‰ฝ แˆˆแˆแŠ•แ‹ตแАแ‹ Lapping แ‹จแˆ›แ‹ญแˆแ‰€แ‹ฐแ‹??
.
โžกAnswer - แŒแˆฎแ‹Žแ‰น แˆณแ‹ญแ‹›แ‰ธแ‹ แ‰ตแˆแˆแ‰… แˆตแˆˆแˆ†แА Lap แ‰ฅแŠ“แ‹ฐแˆญแŒ‹แ‰ธแ‹ แˆŽแ‹ต แ‰ตแˆซแŠ•แˆตแˆแˆญ แŠฅแŠ•แ‹ฒแŠ–แˆญ แˆ‹แ• แˆŒแŠ•แŒแ‹™ แˆจแŒ…แˆ แˆ˜แˆ†แŠ• แŠ แˆˆแ‰ แ‰ต แ‰ แ‰ฐแŒจแˆ›แˆชแˆ แˆแˆˆแ‰ฑแŠ• แŠ แŠ•แ‹ต แˆ‹แ‹ญ แˆ›แˆฐแˆชแ‹ซ แ‰ตแˆแ‰… แ‹ฒแ‹ซแˆœแ‰ตแˆญ แ‹ซแˆˆแ‹ แŒแˆฎ/ แˆฝแ‰ฆ แ‹ซแˆตแˆแˆแŒˆแŠ“แˆ - แŠ แˆตแ‰ธแŒ‹แˆช แАแ‹::
.
โžก Question - แˆŠแแ‰ถแ‰ฝ แ‹แˆตแŒฅ แˆˆแˆแŠ•แ‹ตแАแ‹ แˆ˜แˆตแ‰ณแ‹ˆแ‰ต แ‹จแˆšแŒˆแŒ แˆ˜แ‹??
.
โžกAnswer - แ‰ แŒแ‹ตแŒแ‹ณ แ‹จแ‰ฐแŠจแ‰ แ‰  แ‰ แŒฃแˆ แŒ แ‰ฃแ‰ฅ แ‰คแ‰ต แ‹แˆตแŒฅ แ‹แˆ แ‰ฅแˆˆแŠ• แ‰ฅแŠ•แ‰†แˆ แˆแŠ• แ‹ญแˆฐแˆ›แŠ“แˆ??
แˆŠแแ‰ถแ‰ฝ แŠจแŒฅแ‰ แ‰ณแ‰ธแ‹ แ‰ แ‰ฐแŒจแˆ›แˆช แŠฅแŠ•แ‰…แˆตแ‰ƒแˆด แˆตแˆˆแˆšแ‹ซแ‹ฐแˆญแŒ‰ แˆฐแ‹Žแ‰ฝ แ‹ญแˆฐแŒ‹แˆ‰ แˆแŠ• แŠ แˆแ‰ฃแ‰ต แŠ แ‹ฐแŒ‹ แŠจแ‰ฐแŠจแˆฐแ‰ฐ แค แˆ˜แ‰ฅแˆซแ‰ต แŠจแŒ แ‹ l แˆแŠ“แˆแŠ• แ‰ฅแˆˆแ‹ - แŠฅแŠ“แˆ แˆฐแ‹Žแ‰ฝ แ€แŒ‰แˆซแ‰ธแ‹แŠ• แŠฅแ‹ซแˆตแ‰ฐแŠซแŠจแˆ‰ แค l แ‹แ‰ แ‰ณแ‰ธแ‹แŠ• แŠฅแ‹ซแ‹ฐแАแ‰ แˆแŠ“แˆแŠ• แˆแ‰ณ
แŠฅแŠ•แ‹ฒแˆ‰แŠ“ แˆƒแˆณแ‰ฃแ‰ธแ‹แŠ• แŠฅแŠ•แ‹ฒแˆฐแˆจแ‰… แАแ‹ แˆŠแแ‰ต แ‹แˆตแŒฅ แˆ˜แˆตแ‰ณแ‹ˆแ‰ต แ‹จแˆšแŒˆแŒ แˆ˜แ‹::
.
๐Ÿ‘‡๐Ÿ‘‡๐Ÿ‘‡๐Ÿ‘‡๐Ÿ‘‡
Join for more updates via the link below;
t.me/COTMp
๐Ÿ‘†๐Ÿ‘†๐Ÿ‘†๐Ÿ‘†๐Ÿ‘†
โšก แŠ แˆแŠ‘แŠ‘ Join แ‰ แˆ›แˆจแŒ แŠฅแŠ“ แˆˆแŒ“แ‹ฐแŠ›แ‹Ž แŠฅแŠ“ แˆˆแˆšแ‹ซแ‰แ‰ต แˆแˆ‰ แˆผแˆญ แ‹ซแ‹ตแˆญแŒ‰แข แŠฅแŠ“แˆ˜แˆฐแŒแŠ“แˆˆแŠ•แข
๐Ÿ‘1
๐Ÿ‘‰ แ‰ณแˆชแŠซแ‹Šแ‰ต แŠจแ‰ฐแˆ› แŒŽแŠ•แ‹ฐแˆญ๐Ÿ˜
.
๐Ÿšฉแ‹แ‰ฅ แˆแˆฝแ‰ต แ‰ฐแˆ˜แŠแŠ• @COTMp
Ethio Construction Engineering
Photo
๐Ÿ‘‰10 key terms of Project management and schedule
you should know. @COTMp ๐Ÿ‘†
.
1. WBS (Work Breakdown Structure): Is hierarchical that breaks down the work into manageable clods so that each level of WBS could be easily understood by the project team.
.
2. Milestone:
These are the significant points in time or an event
that mark important moments during the project.
These are mainly used for
โ— Starting phase
โ— Ending phase
โ— Fixed dates on plan
.
3. Baseline:
Is used to measure the performance of the project.
There are three baselines in project management.
These are โ€“
โ— Schedule baseline
โ— Cost baseline
โ— Scope baseline
4. Gantt Chart:
Is a bar chart that displays the scheduled
.
information graphically.
5. Critical Path Method (CPM) Critical Path Method (CPM) is a step by step approach in which one can analyze critical and non- critical tasks.
6. Dummy Activity:
dummy activity is a simulated activity of sorts, one that is of a zero duration.
.
7. Float:
Float, also called slack, is the amount of time a
task can slip before it bumps into another task.
8. Chart Dependencies:
.
the predecessor is the first task; it controls the start
or end date for all related successor tasks. The
successor, by contrast, is the task whose start or
end date is controlled by the predecessor.
.
9. Types of relationship:
โ–  Finish to Start: Predecessor must finish before Successor can start.
โ–  Start to Start:Predecessor must start before Successor can start.
โ–  Finish to Finish: Predecessor must finish before Successor can finish.
โ–  Start to Finish: Predecessor must start before Successor can finish.
.
10. Lead time and Lag time: Lead time causes the successor task to begin
before its predecessor task concludes.
Lag time causes the successor task to begin some time after its predecessor task concludes.
.
๐Ÿ‘‡๐Ÿ‘‡๐Ÿ‘‡๐Ÿ‘‡๐Ÿ‘‡
Join for more updates via the link below;
t.me/COTMp
๐Ÿ‘†๐Ÿ‘†๐Ÿ‘†๐Ÿ‘†๐Ÿ‘†
โšก แŠ แˆแŠ‘แŠ‘ Join แ‰ แˆ›แˆจแŒ แŠฅแŠ“ แˆˆแŒ“แ‹ฐแŠ›แ‹Ž แŠฅแŠ“ แˆˆแˆšแ‹ซแ‰แ‰ต แˆแˆ‰ แˆผแˆญ แ‹ซแ‹ตแˆญแŒ‰แข
Structural_Analysis_by_R_C_Hibbeler.pdf
30.1 MB