This media is not supported in your browser
VIEW IN TELEGRAM
Automated car 🚗 🚙 🚘 parking systems in Germany 🇩🇪
Automated car parking system(APS) is a mechanical system designed to minimize the area and / or volume required for parking cars. Like a multistory parking garage, an APS ,provides parking for cars on multiple levels stacked vertically to maximize the number of parking spaces while minimizing land usage.
Source:- en.wikipidia.org/wiki/automated_parking_system
እኛም ሀገር የ parking ህንፃ መገናኛ አካባቢ ከዘፍመሽ grand mall ወደጎን በስተቀኝ በኩል እና መርካቶ ከ አንዋር መስጊድ ፊትለፊት automated car parking system (APS) ሙሉ በሙሉ በ ብረት የተሰራ (steel structure) የሆነ አለ። ይህም በአፍሪካ የመጀመሪያ ያደርገዋል።
በ መገናኛ የሚገኘው የ parking ህንፃ 52 ሚልየን ብር ወቶበታል።
ምንጭ ፡ - https://youtu.be/B2H1VzH-fXI
ሌላ የ parking ህንፃ ኢሊሌ ሆቴል ካዛንቺስ የ parking ህንፃ ገንብቷል ነገር ግን automated car parking system አይደለም።
@etconp
Automated car parking system(APS) is a mechanical system designed to minimize the area and / or volume required for parking cars. Like a multistory parking garage, an APS ,provides parking for cars on multiple levels stacked vertically to maximize the number of parking spaces while minimizing land usage.
Source:- en.wikipidia.org/wiki/automated_parking_system
እኛም ሀገር የ parking ህንፃ መገናኛ አካባቢ ከዘፍመሽ grand mall ወደጎን በስተቀኝ በኩል እና መርካቶ ከ አንዋር መስጊድ ፊትለፊት automated car parking system (APS) ሙሉ በሙሉ በ ብረት የተሰራ (steel structure) የሆነ አለ። ይህም በአፍሪካ የመጀመሪያ ያደርገዋል።
በ መገናኛ የሚገኘው የ parking ህንፃ 52 ሚልየን ብር ወቶበታል።
ምንጭ ፡ - https://youtu.be/B2H1VzH-fXI
ሌላ የ parking ህንፃ ኢሊሌ ሆቴል ካዛንቺስ የ parking ህንፃ ገንብቷል ነገር ግን automated car parking system አይደለም።
@etconp
👉Building construction @ETCONp
.
▶️Definitions of terms Of Masonry👇
.
1. Course : A course is a horizontal layer of bricks stones
2. Bed : the surface of a stone perpendicular to the line of pressure of (lower surface of bricks or stones in each course)
3. Back : The inner surface of wall not exposed is called back.
The material forming back is known as backing
4. Face : The exterior of the wall exposed to weather is known
as face. The material used in the facing of wall is known as
facing
5. Hearting : It is the interior portion of a wall between facing
and backing
6. Head : It is a brick or stone, which lies with its greatest length at right angles to the face of the work.
7. Stretcher : It is a brick or a stone which lies with its congest
side parallel to the face of the work
8. Bond : The method of arranging bricks so that the individual units are tied together
9. Spalls : The chips of stones used for filling the interstices in
stone masonry
10. Quoins : The stones used for the corners of walls of structure
11. Bat : It is a portion of a brick cut across the width.
12. Closer: It is the portion of a brickcut in such a manner that its one long face remains uncut
13. Queen closer: it is the portion of a brick obtained by cutting a brick length-wise into two portions
14. King closer: It is the portion of brick obtained by cutting off
the triangular piece between the centre of one end and the
centre of one side.
15. Bevelled closer: It is the portion of a brick in which the
whole length of the brick is bevelled for maintaining half
width at one end and full width at the other
16. Frog : It is an indentation or depression on the top face of a
brick made with the object of forming a key for the mortar.
17. Sill : It is a horizontal stone, concrete or wood, employed for
the purpose of shedding off rain water from the face of wall
immediately below the window opening
18. Corbel : It is the extension of one or more course of stone or
brick from the face of a wall to serve as a support for wall
plates
19. Templates : Pieces of stones placed under the end of a beam
to distribute load over a greater area.
20. Coping : It is the course placed upon the exposed top of an external wall to prevent the seepage of water
21. Buttress : It is a sloping or stepped masonry projection from a tall wall intended to strengthen the wall against the thrust of a roof
.
#BuildingConstruction
#Masonary
.
🚧ወደ መወያያ ግሩፓችን ለመቀላቀል ከታች ባለው ሊንክ ተጭነው ይቀላቀሉን...
.
👇👇👇👇
http://t.me/COTMp
.
▶️Definitions of terms Of Masonry👇
.
1. Course : A course is a horizontal layer of bricks stones
2. Bed : the surface of a stone perpendicular to the line of pressure of (lower surface of bricks or stones in each course)
3. Back : The inner surface of wall not exposed is called back.
The material forming back is known as backing
4. Face : The exterior of the wall exposed to weather is known
as face. The material used in the facing of wall is known as
facing
5. Hearting : It is the interior portion of a wall between facing
and backing
6. Head : It is a brick or stone, which lies with its greatest length at right angles to the face of the work.
7. Stretcher : It is a brick or a stone which lies with its congest
side parallel to the face of the work
8. Bond : The method of arranging bricks so that the individual units are tied together
9. Spalls : The chips of stones used for filling the interstices in
stone masonry
10. Quoins : The stones used for the corners of walls of structure
11. Bat : It is a portion of a brick cut across the width.
12. Closer: It is the portion of a brickcut in such a manner that its one long face remains uncut
13. Queen closer: it is the portion of a brick obtained by cutting a brick length-wise into two portions
14. King closer: It is the portion of brick obtained by cutting off
the triangular piece between the centre of one end and the
centre of one side.
15. Bevelled closer: It is the portion of a brick in which the
whole length of the brick is bevelled for maintaining half
width at one end and full width at the other
16. Frog : It is an indentation or depression on the top face of a
brick made with the object of forming a key for the mortar.
17. Sill : It is a horizontal stone, concrete or wood, employed for
the purpose of shedding off rain water from the face of wall
immediately below the window opening
18. Corbel : It is the extension of one or more course of stone or
brick from the face of a wall to serve as a support for wall
plates
19. Templates : Pieces of stones placed under the end of a beam
to distribute load over a greater area.
20. Coping : It is the course placed upon the exposed top of an external wall to prevent the seepage of water
21. Buttress : It is a sloping or stepped masonry projection from a tall wall intended to strengthen the wall against the thrust of a roof
.
#BuildingConstruction
#Masonary
.
🚧ወደ መወያያ ግሩፓችን ለመቀላቀል ከታች ባለው ሊንክ ተጭነው ይቀላቀሉን...
.
👇👇👇👇
http://t.me/COTMp
Telegram
ETCONp Discussion
📩ለማነኛውም ሀሳብ እና አስተያየት @Philemona7
✌️ይህ የ @etconp መወያያ ግሩፓቹ ነው።
✋This is discussion group of @ETCONpWORK
.
🔖ማሳሰብያ ...
.
⚡️ግሩፑ ላይ ማነኛውም ከ ኮንስትራክሽን ጉዳዮች ውጪ መለጠፍ በፍፁም አይፈቀድም!
@ETCONpBOT ፃፉልን እናመሰግናለን🙏
✌️ይህ የ @etconp መወያያ ግሩፓቹ ነው።
✋This is discussion group of @ETCONpWORK
.
🔖ማሳሰብያ ...
.
⚡️ግሩፑ ላይ ማነኛውም ከ ኮንስትራክሽን ጉዳዮች ውጪ መለጠፍ በፍፁም አይፈቀድም!
@ETCONpBOT ፃፉልን እናመሰግናለን🙏
👍1
Automatic REBAR TYING MACHINE
Trying the rebar together can be a time-consuming and laborious job. Most contractors are forced to hand tie them individually after they’ve mounted the rebar structure.
I want to Thank Abebaw for sharing this picture to us.
ይህ የምትመለከቱት machine ብረት ከብረት ጋር ለማሰር የሚጠቅም automatic machine ነው። ይህ ማለት የጉጠትን ስራ ተክቶ ሚሰራልን እጅግ ዘመናዊ machine ነው።
እስኪ እኛ ሀገር ይህ በስፋት ቢስፋፋ የ project’ዎች መርሐ ግብር ላይ( project schedule) ላይ የሚኖረውን አዎንታዊ ተፅዕኖ አስቡት።
ይህን ምስል ላጋራን አበባው ምስጋናችን ይድረሰው።
We got some video to share you showing how this machine operates.
ይህን machine በተመለከተ machine’ሁ እንዴት እንደሚሰራ የሚያሳይ video እንለቅላችኋለን። የግንባታ እቃ አቅራቢዎቻችን ይህን machine ቢመጣ ለ construction industry’ው እጅግ የላቀ ጥቅም አለው እንላለን።
@etconp
Trying the rebar together can be a time-consuming and laborious job. Most contractors are forced to hand tie them individually after they’ve mounted the rebar structure.
I want to Thank Abebaw for sharing this picture to us.
ይህ የምትመለከቱት machine ብረት ከብረት ጋር ለማሰር የሚጠቅም automatic machine ነው። ይህ ማለት የጉጠትን ስራ ተክቶ ሚሰራልን እጅግ ዘመናዊ machine ነው።
እስኪ እኛ ሀገር ይህ በስፋት ቢስፋፋ የ project’ዎች መርሐ ግብር ላይ( project schedule) ላይ የሚኖረውን አዎንታዊ ተፅዕኖ አስቡት።
ይህን ምስል ላጋራን አበባው ምስጋናችን ይድረሰው።
We got some video to share you showing how this machine operates.
ይህን machine በተመለከተ machine’ሁ እንዴት እንደሚሰራ የሚያሳይ video እንለቅላችኋለን። የግንባታ እቃ አቅራቢዎቻችን ይህን machine ቢመጣ ለ construction industry’ው እጅግ የላቀ ጥቅም አለው እንላለን።
@etconp
Ethio Construction Engineering
Automatic REBAR TYING MACHINE Trying the rebar together can be a time-consuming and laborious job. Most contractors are forced to hand tie them individually after they’ve mounted the rebar structure. I want to Thank Abebaw for sharing this picture to us.…
This media is not supported in your browser
VIEW IN TELEGRAM
Automatic REBAR TYING MACHINE
Trying the rebar together can be a time-consuming and laborious job. Most contractors are forced to hand tie them individually after they’ve mounted the rebar structure.
ይህ የምትመለከቱት machine ብረት ከብረት ጋር ለማሰር የሚጠቅም automatic machine ነው። ይህ ማለት የጉጠትን ስራ ተክቶ ሚሰራልን እጅግ ዘመናዊ machine ነው።
እስኪ እኛ ሀገር ይህ በስፋት ቢስፋፋ የ project’ዎች መርሐ ግብር ላይ( project schedule) ላይ የሚኖረውን አዎንታዊ ተፅዕኖ አስቡት።
@etconp
Trying the rebar together can be a time-consuming and laborious job. Most contractors are forced to hand tie them individually after they’ve mounted the rebar structure.
ይህ የምትመለከቱት machine ብረት ከብረት ጋር ለማሰር የሚጠቅም automatic machine ነው። ይህ ማለት የጉጠትን ስራ ተክቶ ሚሰራልን እጅግ ዘመናዊ machine ነው።
እስኪ እኛ ሀገር ይህ በስፋት ቢስፋፋ የ project’ዎች መርሐ ግብር ላይ( project schedule) ላይ የሚኖረውን አዎንታዊ ተፅዕኖ አስቡት።
@etconp
topic ~ Geotechnical engineering
Q] what is value of shrinkage limit if dry unit weight of soil is 19.62KN/m^3 and specific gravity is given as 2.5 @ETCONP
Q] what is value of shrinkage limit if dry unit weight of soil is 19.62KN/m^3 and specific gravity is given as 2.5 @ETCONP
Anonymous Quiz
17%
0.15
30%
0.20
41%
0.25
13%
0.10
Ethio Construction Engineering
matdesign@etconp.pdf
This media is not supported in your browser
VIEW IN TELEGRAM
Casting concrete for mat foundation
how to construct a raft or mat foundation
A raft foundation is constructed by first excavating the ground to a uniform, flat level.
Then, a waterproof plastic sheet is laid over the earth, and a thin 3" layer of plain cement concrete (PCC) is poured just to create a perfectly flat and level base for the foundation.
After this, a waterproofing layer is installed, and then reinforcement steel for the raft slab is tied in place. After all the steel has been put in place, concrete is poured to the desired thickness, which is usually in the range of 200mm (8") to 300mm (12") thick for small buildings: this can be much thicker if heavy loads are to be carried.
Source:- understand construction
Mat foundation ወፍራም slab ብላችው አስቡት እንደ isolated footing አይነት ሆኖ ከላይ እና ከታች (dounble reinforced foundation structure ) ነው።
ይህን አይነት foundation የምንመርጥበት ብዙ ምክንያቶች አሉ ለምሳሌ :- የከረሰምድር ውሃ ግፊት, footing'ሁ ከ70% በላይ ይዞታ ካለው stress overlapእንዳይኖር mat foundation እንመርጣለን ወዘተ.....
@etconp
how to construct a raft or mat foundation
A raft foundation is constructed by first excavating the ground to a uniform, flat level.
Then, a waterproof plastic sheet is laid over the earth, and a thin 3" layer of plain cement concrete (PCC) is poured just to create a perfectly flat and level base for the foundation.
After this, a waterproofing layer is installed, and then reinforcement steel for the raft slab is tied in place. After all the steel has been put in place, concrete is poured to the desired thickness, which is usually in the range of 200mm (8") to 300mm (12") thick for small buildings: this can be much thicker if heavy loads are to be carried.
Source:- understand construction
Mat foundation ወፍራም slab ብላችው አስቡት እንደ isolated footing አይነት ሆኖ ከላይ እና ከታች (dounble reinforced foundation structure ) ነው።
ይህን አይነት foundation የምንመርጥበት ብዙ ምክንያቶች አሉ ለምሳሌ :- የከረሰምድር ውሃ ግፊት, footing'ሁ ከ70% በላይ ይዞታ ካለው stress overlapእንዳይኖር mat foundation እንመርጣለን ወዘተ.....
@etconp
Ethio Construction Engineering
topic ~ Geotechnical engineering
Q] what is value of shrinkage limit if dry unit weight of soil is 19.62KN/m^3 and specific gravity is given as 2.5 @ETCONP
Q] what is value of shrinkage limit if dry unit weight of soil is 19.62KN/m^3 and specific gravity is given as 2.5 @ETCONP
Solution for the question
Atterbergs limit
1. Shrinkage limit
2. Plastic limit test
3. Liquid limit
Tap instant view and check the answer
Instant view ማለት ሌላ website አይደለም ፈጣን እይታ ማለት ነው።
https://telegra.ph/shrinkage-limit-05-16
CHECK SOLUTION!
Atterbergs limit
1. Shrinkage limit
2. Plastic limit test
3. Liquid limit
Tap instant view and check the answer
Instant view ማለት ሌላ website አይደለም ፈጣን እይታ ማለት ነው።
https://telegra.ph/shrinkage-limit-05-16
CHECK SOLUTION!
Telegraph
shrinkage limit
following are three atterbergs limits 1) shrinkage limit2) plastic limit 3) liquid limit > beyond shrinkage limit volume doesn't reduce, it remains constant. > Shrinkage limit is computed by following formula 1) 2) Ws = 1/R - 1/G R = dry unit weight = Yd/Yw…
Caryatids, Erechtheion, Acropolis, Athens
While visiting the Acropolis of Athens today, you can take a closer look at the caryatids in the Temple of Erechtheion. Karyatid is actually the name given to Karyai girls according to their origin. When we look at it as an architectural term, columns in the shape of a female statue are called karyatids. These really look like columns. The vertical lines on his clothes look like the threads on a column. In terminology, due to the position called Conpost, the body weight was loaded on the hind leg. In fact, in order to transfer weight, you need to stand exactly like this. It is not difficult to guess how heavy the fabric is by looking at the condition of the fabric.
@etconp
While visiting the Acropolis of Athens today, you can take a closer look at the caryatids in the Temple of Erechtheion. Karyatid is actually the name given to Karyai girls according to their origin. When we look at it as an architectural term, columns in the shape of a female statue are called karyatids. These really look like columns. The vertical lines on his clothes look like the threads on a column. In terminology, due to the position called Conpost, the body weight was loaded on the hind leg. In fact, in order to transfer weight, you need to stand exactly like this. It is not difficult to guess how heavy the fabric is by looking at the condition of the fabric.
@etconp
Ethio Construction Engineering
Caryatids, Erechtheion, Acropolis, Athens While visiting the Acropolis of Athens today, you can take a closer look at the caryatids in the Temple of Erechtheion. Karyatid is actually the name given to Karyai girls according to their origin. When we look…
👆🏾👆🏾👆🏾Although caryatids are the carrier elements of the structure, they also give us clues about the place of women in the life of the period. These women are thought to represent Karian women who had to undertake all the heavy work while waiting for their husbands going to war. This is why caryatids are often used to carry the door pediments at the entrance of the building.
@etconp
@etconp
Ethio Construction Engineering
Crawl space construction 🚧 Mr. Brandon Parker From USA 🇺🇸 Virginia sent us this video @etconp
This media is not supported in your browser
VIEW IN TELEGRAM
ውድ የቻናላችን ቤተሰቦች እንደሚታወቀው ኢትዮጵያ ዘመናዊ ግንባታ የሚካሄደው በ ብረት እና በ concrete ነው። ሁላችንም ማለት ይቻላል ስለ timber Construction የምናቀው በመፅሃፍ ብቻ ነው በተግባር ሀገራችን ስለሌለ ይህን ነገር በመገንዘብ አጋራችን የሆነው Brandon Parker ከ አሜሪካ ቨርጂኒያ ግዛት የ timber construction inspector ነው እናም ማንኛውም የ Timber ግንባታ’ን በተመለከተ ጥያቄ ካላችው ጥያቄችሁን አድርሱኝ ብሏል።
Design አይደልም ስለ ኮንስትራክሽን ነው።
Mr Brandon Parker እናመሰግናለን
@etconp
Design አይደልም ስለ ኮንስትራክሽን ነው።
Mr Brandon Parker እናመሰግናለን
@etconp
Ethio Construction Engineering
ውድ የቻናላችን ቤተሰቦች እንደሚታወቀው ኢትዮጵያ ዘመናዊ ግንባታ የሚካሄደው በ ብረት እና በ concrete ነው። ሁላችንም ማለት ይቻላል ስለ timber Construction የምናቀው በመፅሃፍ ብቻ ነው በተግባር ሀገራችን ስለሌለ ይህን ነገር በመገንዘብ አጋራችን የሆነው Brandon Parker ከ አሜሪካ ቨርጂኒያ ግዛት የ timber construction inspector ነው እናም ማንኛውም የ Timber…
Message from Timber construction inspector
members of this channel as we all know timber construction is broadly known in western countries because of the weather. Standardization is key for timber Construction. Countries like India 🇮🇳, Ethiopia 🇪🇹 and most African countries use RC (RCC) structure for housing.
So almost all of us are not familiar with timber Construction 🚧 so our member mr. Brandon Parker from USA 🇺🇸 Virginia who is timber Construction inspector has sent us message.
🗣”if you have any question regarding timber Construction reach out to me “
Thank you mr Brandon Parker
@etconp
members of this channel as we all know timber construction is broadly known in western countries because of the weather. Standardization is key for timber Construction. Countries like India 🇮🇳, Ethiopia 🇪🇹 and most African countries use RC (RCC) structure for housing.
So almost all of us are not familiar with timber Construction 🚧 so our member mr. Brandon Parker from USA 🇺🇸 Virginia who is timber Construction inspector has sent us message.
🗣”if you have any question regarding timber Construction reach out to me “
Thank you mr Brandon Parker
@etconp
The site is located near the center of Tokyo. It is a small 44m² corner plot bounded by two streets. Conforming to legal conditions and in response to the client’s wish for a ‘roofed garage’ the volume was trimmed from various directions. Using the words ‘Mineral’ and ‘reflection’ as guiding concepts, Atelier Tekuto proceeded to use subtraction as a positive tool for design.
REFLECTION
By controlling geometries (facets with three factors: transparent, translucent and opaque) and entangling them in a three-dimensional way inside the internal space, visual reflection is induced. This results in a deviation from the restrictiveness of space.
MINERAL
Minerals are phenomena that combine abstract properties (conceptual objects) with nonfigurative properties (objects whose presence of matter is more tangible). Changes from transparent to translucent to opaque occur according to light intensity and angle. The mineral body cannot be regarded as a simple element.
Source:- archidaily
@etconp
REFLECTION
By controlling geometries (facets with three factors: transparent, translucent and opaque) and entangling them in a three-dimensional way inside the internal space, visual reflection is induced. This results in a deviation from the restrictiveness of space.
MINERAL
Minerals are phenomena that combine abstract properties (conceptual objects) with nonfigurative properties (objects whose presence of matter is more tangible). Changes from transparent to translucent to opaque occur according to light intensity and angle. The mineral body cannot be regarded as a simple element.
Source:- archidaily
@etconp
“In Europe,” Jurrian Knijtijzer says, “architecture is responsible for 36% of carbon emissions.”
Pointing to the high carbon footprint of concrete, the wastefulness involved with keeping buildings up and running, and the short lifecycle of many structures, he says, of conventional architecture, “we build wrong, we operate wrong, and we demolish wrong.”
He turned to cross-laminated timber (CLT), a type of engineered, prefabricated, and sustainably sourced wood. Not only does Finch prevent the use of concrete, a material with a high carbon footprint, it also captures carbon with its CLT product.
source: https://www.architecturaldigest.com
By: @wintaassefa for @ETCONp
Pointing to the high carbon footprint of concrete, the wastefulness involved with keeping buildings up and running, and the short lifecycle of many structures, he says, of conventional architecture, “we build wrong, we operate wrong, and we demolish wrong.”
He turned to cross-laminated timber (CLT), a type of engineered, prefabricated, and sustainably sourced wood. Not only does Finch prevent the use of concrete, a material with a high carbon footprint, it also captures carbon with its CLT product.
source: https://www.architecturaldigest.com
By: @wintaassefa for @ETCONp
Ethio Construction Engineering via @like
What is the active earth pressure for a soil of height 3 meters , unit weight of 30KN/m³ the angle of internal friction (φ) =30 ⁰? 1. 15KN 2. 20KN 3. 25KN 4 . 30KN #share this question @etconp
Telegram
Ethio Construction Engineering
🔨 World Construction Engineering
Latest updates, tips, and tutorials on building, civil engineering, and construction in World.
Learn, build, and grow with us!
📨 @Philemona7 Or @ETCONpBOT
For Ad:- https://telega.io/c/etconp
Latest updates, tips, and tutorials on building, civil engineering, and construction in World.
Learn, build, and grow with us!
📨 @Philemona7 Or @ETCONpBOT
For Ad:- https://telega.io/c/etconp
Surveying quiz
A vertical crest with length of 4ft and forward tangent of -2% and backward of 1%. What’s the approximate tangent offset of PVI(point of vertical intersection) ?
1. 3.0ft
2. 1.5ft
3. 3.6ft
4. 1.8ft
NB:- it’s FPS system
1 meter = 3.28 feet
1 centimeter =0.394 inch
1 inch = 2.54 centimeters
@etconp
A vertical crest with length of 4ft and forward tangent of -2% and backward of 1%. What’s the approximate tangent offset of PVI(point of vertical intersection) ?
1. 3.0ft
2. 1.5ft
3. 3.6ft
4. 1.8ft
NB:- it’s FPS system
1 meter = 3.28 feet
1 centimeter =0.394 inch
1 inch = 2.54 centimeters
@etconp
👍1
Ethio Construction Engineering via @like
Surveying quiz A vertical crest with length of 4ft and forward tangent of -2% and backward of 1%. What’s the approximate tangent offset of PVI(point of vertical intersection) ? 1. 3.0ft 2. 1.5ft 3. 3.6ft 4. 1.8ft NB:- it’s FPS system 1 meter = 3.28…
Answer of this question 👆🏾👆🏾
➪ a= g1-g2 = -2-1 = -3/8
2L 2 x4
➪ E =a(L/2)² =-3/8(4/2)² =1.5 feet
So the answer is 2
#share
#watermark
@etconp
➪ a= g1-g2 = -2-1 = -3/8
2L 2 x4
➪ E =a(L/2)² =-3/8(4/2)² =1.5 feet
So the answer is 2
#share
#watermark
@etconp
Telegram
Ethio Construction Engineering
🔨 World Construction Engineering
Latest updates, tips, and tutorials on building, civil engineering, and construction in World.
Learn, build, and grow with us!
📨 @Philemona7 Or @ETCONpBOT
For Ad:- https://telega.io/c/etconp
Latest updates, tips, and tutorials on building, civil engineering, and construction in World.
Learn, build, and grow with us!
📨 @Philemona7 Or @ETCONpBOT
For Ad:- https://telega.io/c/etconp
Factor of safety is the ratio of
1. Yield stress to working stress
2. Working stress to yield stress
3. Bearing stress to yield stress
4. Yield stress to bearing stress
To get the answer updated your telegram
@etconp
1. Yield stress to working stress
2. Working stress to yield stress
3. Bearing stress to yield stress
4. Yield stress to bearing stress
To get the answer updated your telegram
@etconp
Ethio Construction Engineering via @like
Factor of safety is the ratio of 1. Yield stress to working stress 2. Working stress to yield stress 3. Bearing stress to yield stress 4. Yield stress to bearing stress To get the answer updated your telegram @etconp
Factor of safety is the ratio of
Anonymous Quiz
60%
Yield stress to working stress
28%
Working stress to yield stress
6%
Bearing stress to yield stress
6%
Yield stress to bearing stress