Ethio Construction Engineering
32.3K subscribers
6.28K photos
359 videos
1.99K files
3.34K links
🔨 World Construction Engineering
Latest updates, tips, and tutorials on building, civil engineering, and construction in World.
Learn, build, and grow with us!

📨 @Philemona7 Or @ETCONpBOT

For Ad:- https://telega.io/c/etconp
Download Telegram
👉ኣዲስ ኣበባ መስቀል ኣደባባይ❤
.
"ለመላው የክርስትና ዕምነት ተከታዮች እንኳን ለብርሃነ መስቀሉ ደመራ በዓል በሠላም አደረሳችሁ።
.
🚩በዓሉ የሠላም ፣ የጤና ፣ የፍቅር ፣ የአንድነት ፣ የብልፅግና እንዲሆን ፈጣሪ አምላክ ፍቃዱ ይሁን!" @COTMp
👉FIELD TESTS FOR AGGREGATE @COTMp
.
1. SURFACE MOISTURE CONTENT & ABSORPTION
*The surface moisture in the aggregate, influences the water cement ratio, strength and durability of the mix.
To determine the surface moisture of moist or wet aggregate, method is as follows- FRYING PAN METHOD
*The following apparatus are required:
A frying pan or metal tray,
Gas stove or an electric hair dryer, A metal or glass stirring rod and Scales to measures. The following procedure is followed during the test
1. For coarse aggregate 2 kg sample is adequate and for fine aggregate 0.5 kg sample is adequate.
2. The wet/moist sample is then weighed wet weight (W)
3. Heated very gently on the frying pan or metal plate and stirred with a glass or metallic rod to maintain uniform distribution of heat, until the sheen disappears from the surface.
*The fine aggregates become surface dry when
it just starts showing free flowing characteristics.
4. The aggregates is then cooled and reweighed. The
surface dry aggregate weight (W ) is noted. The
surface moisture is then calculated as follows-
Surface moisture = [(W – W ) / W ] x 100%
5. Overheating must be avoided, as it will not give the correct surface moisture .
6. If heating is continued either on the fry pan or in the oven till the aggregate is bone dry aggregate weight is then noted (Wbd) after continuous heating. The absorption (absorbed water content) is then calculated as follows-
Absorption = [(W – W ) / W ] x 100%
Similarly, if the dry aggregates are received on site and absorption capacity is to be determined then the aggregates are first soaked in water and then the above methods are
deployed to determine the absorption capacity of
aggregates.
👍1
👆👆👆👆👆👆
.
👉Today Book Tip @COTMp
.
✌Structural analysiss
👉የ ዓለማችን ውብ ከተሞች @COTMp
.
✌ዱባይ ይህንን ትመስላለች።
.
🚩ውብ ምሽት ተመኝን።
⏩TYPES OF PIPES COMMONLY USED IN WATER SUPPLY SYSTEM @COTMp
⭕
▶TYPES OF PIPES:
The types of pipes commonly used in water
distribution system are described below.
.
⭕1. CAST IRON PIPES:
.
Cast iron pipes or CI pipes are broadly utilized for distribution of water because they are less
expensive, corrosion resistant, and long lasting.
CI pipes are mainly produced by following four techniques.
.
1. Horizontally cast ( MC ware pipes)
2. Vertically cast ( Pit cast in sand molds)
3. Centrifugally cast in sand lines molds spun
type.
4. Centrifugally cast in water cooled molds.

Uses of horizontally cast CI pipes are presently pretty much outdated, that’s why they are infrequently produced these days. Centrifugally cast pipes are most widely used because they have more grained dense structure and uniform thickness. Generally, CI pipes are 3-6 m long, so much heavy, and require extra care to avoid from damaging while transporting and creating connections.
.
⭕2. STEEL PIPES:
.
Steel pipes are utilized in water mains circumstances where the pipes are going through very high pressure ( More than 7 kg/cm2) and required large diameter pipes. These pipes have greater strength and less weight than CI pipes. Satisfactory treatments should be given to maintain antagonistic climatic conditions.
.
⭕3. GALVANIZED IRON PIPES:
.
Galvanized pipes are also known as GI pipes are fashioned steel pipes with zinc coating. GI pipes are mostly utilized for water supply and service connections.
.
⭕4. COPPER PIPES:
.
Copper pipes are most commonly utilized in hot water supply establishment. Some features of
this pipes are as following:
1. They possess high tensile strength.
2. They can be bent easily.
3. Copper pipes can be used in thin wall. Copper pipes are sometimes chromium plated to enhance their appearance and to match with the chromium plated water supply fittings.
.
⭕5. POLYTHENE PIPES:
.
Polythene and PVC pipes are being utilized progressively nowadays for cold water supply inside and outside works. These pipes are lightweight, cheaper, corrosion resistant, and require no threading for making any connections.

Besides these, there are other pipes commonly used for water distribution such as :

asbestos cement (AC) pipes,

reinforced concrete (RCC) pipes,

prestressed reinforced concrete (PSC) pipes etc.
.
The selection of the types of pipe for utilizing any purposes is adopted according to the design criteria, material availability, cost, and other comparative variables.
.
🔵⭕🔵 Thank you 🔵⭕🔵
👍1
Ethio Construction Engineering
Photo
🚩የ ዲዛይን ግዜ @COTMp👆👆👆
.
👉አራት መአዘን ቅርፅ ያለው ለአነስተኛ ቤተሰብ የሚውል የውሃ ታንከር ዲዛይን እናርግ...
.
ዲዛይን ከማረጋችን በፊት ስለውሃ ምናልባትም ያልሳማችሁትን እውነታዎች ልጥቀስላችሁ
.
1)የሰውነታችን ሰባ ፐርሰንቱ (70%) ውሃ ነው። ይህ ቁጥር አዲስ ለተወለደ ህፃን ከፍ ይላል።
አዲስ የተወለደ ህፃን ሰውነት 80% ውሃ ነው።
.
2)አንድ ጤነኛ ሰው በቀን እስከ 3 gallon ውሃ ሊጠጣ ይችላል
.
3)በጣም ተጠምታችሁ ታውቃላችሁ? ይህ ከምን የመነጪ ይመስላችኋል በጣም የተጠማችሁት ሰውነታችሁ ውስጥ ያለው የውሃ መጠን በ 1% ሲቀንስ ነው።

4)በአንድ ግዜ ብዙ መጠን ያለው ውሃ መጠጣት ለ"ውሃ ስካር" (water intoxication ) ይዳርጋል።
ብዙ ውሃ ስንጠጣ ውሃ በደማችን ውስጥ የሚገኘውን ሶድየም መጠን በማሟሟት በአእምሮዋችን የሚገኘውን የውሃ መጠን እንዳይመጣጠን ያደርጋል ይህ ደሞ እራስን እስከመሳት ሊያደርስ ይችላል። ሲጠጡ መጠንዎን አይለፉ ውሃም ቢሆን :D
.
5)በቀን ልንጠጣው የሚገባው (recommended) የውሃ መጠን 8 ብርጭቆ ነው።
እንደ አለማቀፋዊው የIS ኮድ አንድ ሰው በቀን ውስጥ ለተለያየ አገልግሎቶች የሚጠቀመው የውሃ መጠን 135 liter ነው።
ይህ ኮድ
*ለመጠጥ - 5 ሊትር
*ለማብሰል- 5 ሊትር
*ለመታጠብ እና ፍሳሽ ለማስወገድ - 85 ሊትረ
*ልብስ እና እቃዎችን ለማጠብ - 30 ሊትር
*ቤት ለማፅዳት - 30 ሊትር ውሃ መጠቀም እንዳለብን ይጠቁማል።
.
▶ይህን የIS ኮድ ይዘን 4 አባላት ላሉት አንድ ቤተሰብ እንደ Hydraulic ኢንጂንየርነታችን አራት መአዘን ቅርፅ ያለው የውሃ ታንከር ዲዛይን እናርግ።
.
4 አባላት (ሰዎች) ላሉት የቤተሰብ አባል ተፈላጊ የውሃ መጠን በliter
135×4 = 650 liter (ለአንድ ሰው በቀን 135 liter )
የውሃ ታንከሩን መጠን ለማወቅ ከርዝመቱ (length ) ከየጎን ስፋት (width ) እና ከቁመቱ/ጥልቀቱ( depth) አንዱን ማወቅ አለብን ።
▶ከ Volume ቀመር እንደምንረዳው
1cu.m = 1000liters
1liter = 0.001 cu.m ነው ስለዚህ
650liter = 0.65 cu.m
.
የታንከራችንን ቁመት 0.6m ብናደርገው የታንከራችን ስፋት (area ) እንዲ ማግኘት እንችላለን
Area= 0.65÷0.6 = 1.083 sq.m ስፋት (area) ማለት ርዝመት (length) ሲባዛ የጎን ስፋት (width) ይሆናል ። ይህም
A=L×W= 1.083 sq.m
በ IS ተጠቃሽ (recommended) የርዝመት መጠን ከሁለት እጥፍ የጎን ርዝመት መጠን ጋር እኩል ነው ።
ይህም L= 2W
L×W=1.083 sq.m
2W×W = 1.083 sq.m
B^2 = 0.054 sq.m
B= 0.74
L= 2×0.74 = 1.48 m
.
▶ስለዚህ 650 liter የሚይዝ ታንከር ፦
ርዝመት (L) =1.48m
የጎን ርዝመት (W) = 0.74m
ቁመት/ጥልቀት= 0.6 m ይሆናል ማለት ነው ። ልንረሳው ማይገባ ነገር ለታንከሩ free flow provide ማረግ አለብን [125mm free flow ]
.
👇👇👇👇👇
Join for more updates via the link below;
t.me/COTMp
👆👆👆👆👆
⚡ አሁኑኑ Join በማረግ እና ለጓደኛዎ እና ለሚያቁት ሁሉ ሼር ያድርጉ። እናመሰግናለን።
❤1
👉Solid mat Foundation which is uniform depth mat
.
🚩SHARE SHARE SHARE
.
✌ @COTMP
🚩ѕнєαя ƒαιℓυяє @COTMp
.
👉shear failure is sudden and brittle failure. The failure is with diagonal cracks occuring some distance from the face of support.

👉on any given section shear and flexure occur at the same time( except point with either shear or moment is zero). The interaction of the two stresses, if the principle of stress transformation is followed, develop tension and shear at an angle different from 0 or 90°.

👉The diagonal tension resulting from interaction of shear and flexure is responsible for shear failure.

👉beams without shear reinforcement faile in one of the five modes:

☑️diagonal tension

☑️shear compression

☑️shear tension

☑️web crushing and

☑️arch rib failure.

👉The failure mode likely to occur depends on:

☑️moment to shear ratio( M/V),

☑️ type of loading(concentrated or distributed)

☑️beam cross section.

👉 concrete without shear reinforcement resists shear by the contribution of:
☑️concrete uncracked section,

☑️aggregate interlock and

☑️due to dowel action of longitudinal reinforcement.
.
👇👇👇👇👇
Join for more updates via the link below;
t.me/COTMp
👆👆👆👆👆
⚡ አሁኑኑ Join በማረግ እና ለጓደኛዎ እና ለሚያቁት ሁሉ ሼር ያድርጉ።
What do you know about vertical circulation system ?

First what does vertical circulation system mean?
It’s the system of building which connects one floor to another or one level to another.

What are vertical circulations of building ?

Stair
Lift
Escalator
Ramp
Ladder
👉በሚያመነጩት ሃይል የአለም 10 ታላላቅ የኤሌክትሪክ ማመንጫ ግድቦች: @COTMp

1.Three Gorges(China)
⚡22500MW

2.Itaipu(Paraguay & Brazil
⚡14000MW

3.Guru(Venezuela)
⚡10,200MW

4.Tucurui(Brazil)
⚡8,370MW

5.Grand Coulee(USA)
⚡6809MW

6.Sayano-Shushenskaya (Russia)
⚡6400MW

7.Longtan(China)
⚡6300MW

8.Krasnoyarsk (Russia)
⚡5988MW

9.Robert-Bourassa(Canada)
⚡5616MW

10.Churchill Falls(Canada)
⚡5428MW