โCenter of gravity Vs Centroid
.
Center of Gravity = แ แแต แ แซแ แ แฅแ แฅแแ แ แ แซแแต
แจแฐแแฐแจแฐแ แจแฅแแแ แ แซแแต แตแฅแตแฅ แแแ แญแณแแแแกแก แฅแแ
แฅแแแ แ แซแแต แจแจแซแณแธแ weight แแญแ แญแฅแฐแต แ แแธแ -
weighแณแธแแแ แ แ แแต weight แแแจแ แฅแแฝแแแ แญแ แ
Resultant แญแฃแแแกแก แญแ Resultant act แจแแซแฐแญแแ แต แฆแณ
Center of Gravity แญแฃแแแกแก
.
Center of Mass = แจCenter of Gravity แแญ แจแแแซแจแ แ
โWeightโ แฆแณ โMassโ แตแแตแแฃแ แต Center Of Mass
แฅแแแแแ (W = mg)
.
Centroid = แจแ แแต แ แซแ แ แญแ แแญ ( length , width &
height ) แแญ แจแแแฐแจแต แจแ แซแ แแแจแแ แฆแณ แแแกแก แฅแแฒแ
แ แฐแแแถ แจแ แแต แ แซแ แแแ แแ แจแแแแ แแฅแฅ Centroid
แแแกแก แแแณแ แจแ แซแต แแ แแ แแแ แ แณแญ แตแตแฃแ แจแแณแณแจแ
แฆแณ
.
Centroid of a Volume = centroid of แแแต - แญแแแตแ
แแญแต แซแแ แ แซแ แแญแ 3D object
Centroid of an Area = 2D แแญแ แตแแตแ แญแแแต แฅแป
แซแแ แ แซแ centroid
Centroid of a Line = แญแแแต แฅแป แซแแ แ แซแ centroid
แแแณแ แแแต
.
Centroid แ Center of Gravity แ แแต แแฅแฅ แแญ แจแแแแต
แ แซแ แแ แแแ แ แแต แแฅ แจแแ material แจแฐแฐแซ แแ -
density แจแฐแแซแจ แแแฑ แแฅแฆแฝ แจแแซแญแแ แต แฆแณแ แญแแซแซแแกแก
@etconp
Facebook:- https://www.facebook.com/etconp/
.
Center of Gravity = แ แแต แ แซแ แ แฅแ แฅแแ แ แ แซแแต
แจแฐแแฐแจแฐแ แจแฅแแแ แ แซแแต แตแฅแตแฅ แแแ แญแณแแแแกแก แฅแแ
แฅแแแ แ แซแแต แจแจแซแณแธแ weight แแญแ แญแฅแฐแต แ แแธแ -
weighแณแธแแแ แ แ แแต weight แแแจแ แฅแแฝแแแ แญแ แ
Resultant แญแฃแแแกแก แญแ Resultant act แจแแซแฐแญแแ แต แฆแณ
Center of Gravity แญแฃแแแกแก
.
Center of Mass = แจCenter of Gravity แแญ แจแแแซแจแ แ
โWeightโ แฆแณ โMassโ แตแแตแแฃแ แต Center Of Mass
แฅแแแแแ (W = mg)
.
Centroid = แจแ แแต แ แซแ แ แญแ แแญ ( length , width &
height ) แแญ แจแแแฐแจแต แจแ แซแ แแแจแแ แฆแณ แแแกแก แฅแแฒแ
แ แฐแแแถ แจแ แแต แ แซแ แแแ แแ แจแแแแ แแฅแฅ Centroid
แแแกแก แแแณแ แจแ แซแต แแ แแ แแแ แ แณแญ แตแตแฃแ แจแแณแณแจแ
แฆแณ
.
Centroid of a Volume = centroid of แแแต - แญแแแตแ
แแญแต แซแแ แ แซแ แแญแ 3D object
Centroid of an Area = 2D แแญแ แตแแตแ แญแแแต แฅแป
แซแแ แ แซแ centroid
Centroid of a Line = แญแแแต แฅแป แซแแ แ แซแ centroid
แแแณแ แแแต
.
Centroid แ Center of Gravity แ แแต แแฅแฅ แแญ แจแแแแต
แ แซแ แแ แแแ แ แแต แแฅ แจแแ material แจแฐแฐแซ แแ -
density แจแฐแแซแจ แแแฑ แแฅแฆแฝ แจแแซแญแแ แต แฆแณแ แญแแซแซแแกแก
@etconp
Facebook:- https://www.facebook.com/etconp/
๐4
โPoints...
The d/n b/n spacer and concrete cover is that,,
Spacer is used to know the thickness of concrete cover It produced before concrete work of column,beam or slab starts or during reinforcements work.
No more attention given to Quality and mix ratio.
Care only given to thickness of the spacer.
But concrete cover is amass of concrete used to cover the reinforcement bar.
Quality, mix ratio and other important considerable measures taken during concrete covering work.
The d/n b/n spacer and concrete cover is that,,
Spacer is used to know the thickness of concrete cover It produced before concrete work of column,beam or slab starts or during reinforcements work.
No more attention given to Quality and mix ratio.
Care only given to thickness of the spacer.
But concrete cover is amass of concrete used to cover the reinforcement bar.
Quality, mix ratio and other important considerable measures taken during concrete covering work.
๐2
๐ADMIXTURES
~~~~~~~~~~~~~~
Admixtures are the special ingredients added during
concrete mixing to enhance the properties and performance of fresh concrete. Various types of
admixtures are available in the market which is
used in construction work.
FUNCTION OF ADMIXTURES:
1. To accelerate or retard the setting time of fresh
concrete.
2. To improve the workability or flowability of
concrete.
3. To increase the strength and durability of concrete.
4. To reduce the heat of hydration.
5. To reduce the segregation and bleeding.
6. To decrease the permeability.
7. To achieve other desired properties.
TYPES OF ADMIXTURES:
1. ACCELERATING ADMIXTURES:
This admixture is added in concrete or mortar for
increasing the rate of hydration of hydraulic cement and for shortening the setting time. Calcium
chloride (CaCl2) is the most widely used
accelerating admixture.
2. RETARDING ADMIXTURES:
Retarding admixtures delay the initial rate of
hydration of cement and extend the setting time of
cement paste. This admixture can be used in high temperature and where the concrete has to be transported to a long distance. It is also suitable for using in grouting oil wells.
3. AIR-ENTRAINING ADMIXTURES:
Air entraining admixtures help to produce a certain
amount of air bubbles in the concrete mixture. The
main goal of this admixture is to increase the resistance against freeze-thaw degradation and cohesion. It also improves the workability of fresh concrete without changing the setting or the rate of hardening.
4. WATER REDUCING ADMIXTURES:
As the name suggest, water reducers are added to a concrete mixture, mortar or grout to increase the flow ability without increasing the water content.
Advantages Of Water Reducing Admixtures:
1. The rate of concrete placement is faster.
2. Strength, durability, density etc. are significantly improved.
3. Segregation, permeability, and cracking are reduced.
SPECIAL ADMIXTURES:
1. Superplasticizing admixtures.
2. Corrosion-inhibiting admixtures.
3. Grouting admixtures.
4. Coloring admixtures etc.
~~~~~~~~~~~~~~
Admixtures are the special ingredients added during
concrete mixing to enhance the properties and performance of fresh concrete. Various types of
admixtures are available in the market which is
used in construction work.
FUNCTION OF ADMIXTURES:
1. To accelerate or retard the setting time of fresh
concrete.
2. To improve the workability or flowability of
concrete.
3. To increase the strength and durability of concrete.
4. To reduce the heat of hydration.
5. To reduce the segregation and bleeding.
6. To decrease the permeability.
7. To achieve other desired properties.
TYPES OF ADMIXTURES:
1. ACCELERATING ADMIXTURES:
This admixture is added in concrete or mortar for
increasing the rate of hydration of hydraulic cement and for shortening the setting time. Calcium
chloride (CaCl2) is the most widely used
accelerating admixture.
2. RETARDING ADMIXTURES:
Retarding admixtures delay the initial rate of
hydration of cement and extend the setting time of
cement paste. This admixture can be used in high temperature and where the concrete has to be transported to a long distance. It is also suitable for using in grouting oil wells.
3. AIR-ENTRAINING ADMIXTURES:
Air entraining admixtures help to produce a certain
amount of air bubbles in the concrete mixture. The
main goal of this admixture is to increase the resistance against freeze-thaw degradation and cohesion. It also improves the workability of fresh concrete without changing the setting or the rate of hardening.
4. WATER REDUCING ADMIXTURES:
As the name suggest, water reducers are added to a concrete mixture, mortar or grout to increase the flow ability without increasing the water content.
Advantages Of Water Reducing Admixtures:
1. The rate of concrete placement is faster.
2. Strength, durability, density etc. are significantly improved.
3. Segregation, permeability, and cracking are reduced.
SPECIAL ADMIXTURES:
1. Superplasticizing admixtures.
2. Corrosion-inhibiting admixtures.
3. Grouting admixtures.
4. Coloring admixtures etc.
๐3
๐How can you increase the bearing capacity of soil?
*The following techniques can be used for
improving bearing capacity of soil as per the site
condition.
=>Increasing depth of foundation
=>Draining the soil
=>Compacting the soil
=>Confining the soil
=>Replacing the poor soil
=>Using grouting material
=>Stabilizing the soil with chemicals
*The following techniques can be used for
improving bearing capacity of soil as per the site
condition.
=>Increasing depth of foundation
=>Draining the soil
=>Compacting the soil
=>Confining the soil
=>Replacing the poor soil
=>Using grouting material
=>Stabilizing the soil with chemicals
๐3
๐Load Combination
.
Load Combination - แ แแต แแ แแญ แจแแแก แแถแฝแ Analyze แตแแฐแญแ แแแ แแถแฝ (LL,DL,EQ,WL, etc)
แ แฐแแณแณแญ แฐแแต แญแจแฐแณแ แฐแฅแ แ แญแณแฐแฅแ แฅแแฐแ แขแแ แแฎ แแตแแแฝ แแแฝ แตแแแ size แซแแธแ Beam, Column แฅแ
Slab แฃแตแแแแแ Uneconomical แ แแแ แแ แญแกแก แฅแแตแ แแตแ แฅแแตแ แแต แ แแต แแญ แฒแจแฐแต แแแฐ แฅแซแแ Load
Combination แฅแแแฃแแแกแก แแถแนแแ แ Factor แฅแแฃแแธแแแ:: Factor แซแตแแแแ แตแ แแญแแซแต Load
occurrence probability แฅแ แ แฐแแซแฉ แแญแแซแถแฝ แจแแแ แฉ
Load Uncertainties แแแตแแแต แแแกแก
.
แตแแต Load Combination แ แ??
.
.
แฅแ แแแซแ แ Load Combination แฅแแต แฒแแแแก แญแณแซแแกแก
แ แแณแแถแฝ 2 แแ แญแแ แค แแแฝ 7 แแ แญแแ แค แแแแแฝ 5
แค แแแแแแแฝ 11โฆโฆ..แแแแแแ แฐแฃแตแ แแ แ แแธแ!!!
.
.
แฐแฃแต แจแแแแ Earth Quake แฅแ Wind Loadแ แฅแ
แซแแฉแแต แ แตแญแแ แจแแแฑ Govern แจแแซแฐแญแแแ แจแแจแ แ แแ
Governing แแฑแ แ แแฅแญ แแดแแตแแฉ (SAP/Etabs)
แตแแฐแ แ แฐแฃแต แแแกแก
.
.
แแ แ แจแแแแ แจ Earth Quake แแญแ Wind แแฑแ แจแฐแแซแฉ แแญแฐแฎแฝ แแถแแตแแฉ แฅแแฐแ แแ แฅแซแฑ แถแแตแแฉ แแฑแ แซแแฉแแต แ แตแญแ แ แแฒแ แแ แจแแแแ แแ แ Combo แฅแแ แแแแแกแก
.
Load Combination - แ แแต แแ แแญ แจแแแก แแถแฝแ Analyze แตแแฐแญแ แแแ แแถแฝ (LL,DL,EQ,WL, etc)
แ แฐแแณแณแญ แฐแแต แญแจแฐแณแ แฐแฅแ แ แญแณแฐแฅแ แฅแแฐแ แขแแ แแฎ แแตแแแฝ แแแฝ แตแแแ size แซแแธแ Beam, Column แฅแ
Slab แฃแตแแแแแ Uneconomical แ แแแ แแ แญแกแก แฅแแตแ แแตแ แฅแแตแ แแต แ แแต แแญ แฒแจแฐแต แแแฐ แฅแซแแ Load
Combination แฅแแแฃแแแกแก แแถแนแแ แ Factor แฅแแฃแแธแแแ:: Factor แซแตแแแแ แตแ แแญแแซแต Load
occurrence probability แฅแ แ แฐแแซแฉ แแญแแซแถแฝ แจแแแ แฉ
Load Uncertainties แแแตแแแต แแแกแก
.
แตแแต Load Combination แ แ??
.
.
แฅแ แแแซแ แ Load Combination แฅแแต แฒแแแแก แญแณแซแแกแก
แ แแณแแถแฝ 2 แแ แญแแ แค แแแฝ 7 แแ แญแแ แค แแแแแฝ 5
แค แแแแแแแฝ 11โฆโฆ..แแแแแแ แฐแฃแตแ แแ แ แแธแ!!!
.
.
แฐแฃแต แจแแแแ Earth Quake แฅแ Wind Loadแ แฅแ
แซแแฉแแต แ แตแญแแ แจแแแฑ Govern แจแแซแฐแญแแแ แจแแจแ แ แแ
Governing แแฑแ แ แแฅแญ แแดแแตแแฉ (SAP/Etabs)
แตแแฐแ แ แฐแฃแต แแแกแก
.
.
แแ แ แจแแแแ แจ Earth Quake แแญแ Wind แแฑแ แจแฐแแซแฉ แแญแฐแฎแฝ แแถแแตแแฉ แฅแแฐแ แแ แฅแซแฑ แถแแตแแฉ แแฑแ แซแแฉแแต แ แตแญแ แ แแฒแ แแ แจแแแแ แแ แ Combo แฅแแ แแแแแกแก
๐3๐1
๐แ แตแฒ แแฌ แฐแ แตแ Cohesion แตแแฝ แแ แ....
.
Cohesion โ soil แแญแฒแญแแฝ แ แแต แแญ แฅแแฒแฃแ แ แจแแซแฐแญแ แแญแต แแ แจแแแแแแ แ Kilo Newton แแ::
.
Angle of Internal friction - แ แแต soil แแญแฒแญแแ แฅแแแตแต
แ แซแฑ แญแฅแฐแต แแญแ แ แแแฝ แแญแฒแญแแฝ แแญแแซแต แ แแแ แญ
แแตแแซ (friction) แแญแแซแต Horizontal (H) แฅแ Vertical
(V) แแต แฐแ แฅแ แแตแฅ แญแแตแแ - แฅแแแ แ แแถแฝ
แจแแแแแ แ แ แซแฃแขแ แซแแต แแญแฒแญแแฝ Normal แฅแ
Shear (T) react แตแแแซแฐแญแ แแโฆ แจแแแ แแญแถแฝ
Resultant (R) แจ โNโ แแญ แจแแฐแซแ แ แแแ แแ Angle of
internal friction.
.
Angle of Wall friction โ แฅแแฐ angle of internal friction
แแ แแแญ แแ soil แแญแฒแญแแ Slip แแแ แจแฐแแซแฉ แแดแชแซแแฝ
แจแฐแฐแฉ angle of wall friction แญแฃแแแกแก Lateral Earth
Pressure แแญ Coulomb Method แญแ แแ แจแ แแแ แ แญแแต
แญแ แแแ::
.
Cohesion แฅแ Angle of internal friction แตแแ แแ แแแต Bearing capacity แตแแ แแ แแแต แแ::
.
Cohesion โ soil แแญแฒแญแแฝ แ แแต แแญ แฅแแฒแฃแ แ แจแแซแฐแญแ แแญแต แแ แจแแแแแแ แ Kilo Newton แแ::
.
Angle of Internal friction - แ แแต soil แแญแฒแญแแ แฅแแแตแต
แ แซแฑ แญแฅแฐแต แแญแ แ แแแฝ แแญแฒแญแแฝ แแญแแซแต แ แแแ แญ
แแตแแซ (friction) แแญแแซแต Horizontal (H) แฅแ Vertical
(V) แแต แฐแ แฅแ แแตแฅ แญแแตแแ - แฅแแแ แ แแถแฝ
แจแแแแแ แ แ แซแฃแขแ แซแแต แแญแฒแญแแฝ Normal แฅแ
Shear (T) react แตแแแซแฐแญแ แแโฆ แจแแแ แแญแถแฝ
Resultant (R) แจ โNโ แแญ แจแแฐแซแ แ แแแ แแ Angle of
internal friction.
.
Angle of Wall friction โ แฅแแฐ angle of internal friction
แแ แแแญ แแ soil แแญแฒแญแแ Slip แแแ แจแฐแแซแฉ แแดแชแซแแฝ
แจแฐแฐแฉ angle of wall friction แญแฃแแแกแก Lateral Earth
Pressure แแญ Coulomb Method แญแ แแ แจแ แแแ แ แญแแต
แญแ แแแ::
.
Cohesion แฅแ Angle of internal friction แตแแ แแ แแแต Bearing capacity แตแแ แแ แแแต แแ::
โค1๐1
๐ แฃแแ แฐแ แตแ Foundation (แแ แจแต) แตแแฝ แฅแแ แ...
.
โShallow Foundation-แฅแแแ แ แแแแดแฝแแฝ แจแแแ แแแ แ แแฉ แฅแแ แณแญแแแญ แ แ แญแฅ แฅแแแต แ แแซแซ แจแ แแญ แแแณ แซแ แแแกแก แแแแแฃแต แตแแแ แแบแแฝ แ แซแตแแแแ แฅแ แฝแแณแ แ แญแ แญแแ::
.
Spread/ Pad/ Isolated Footing - แ แแต แฎแแ แฅแป แแ
support แจแแซแฐแญแแต- แจแแแฃแแ แแญแต eccentricity แแฐแจแต แ แแตแจแ circular/ rectangular or square แจแแ แ แญแ แแแซแธแ แญแฝแแแกแก แซแแแฎ แแแแก แญแฝแแ แแแณแ แแฑแ slopped แ แแตแจแ::
.
Combined Footing - แแแตแ แจแ แ แแญ แฎแแแฝแ แ แ แแต แแต
support แแแตแจแ แแ แจแแแ แแแฃแธแแกแก แฅแแแ แ
แจแแแ แแแ แแแต แฐแแซแซแข Isolated Footing แซแ แแแฑแ
แ แแต แแญ combine แ แแตแจแ แฎแแญแชแตแ แแฎแ แดแญ แแตแจแ
แฅแแฝแแแแกแก แ แฐแจแแชแ isolated แแแ แแ property
limit แซแ แฅแแแ แ แแ แแ แฅแแฝแแแ:: 2 แ แญแแต Combined
Footing แ แ- แฅแแญแฑแ แก-
.
1. Rectangular Combined Footing โ แญแ แแ แจแแแ แแแ แแแฑแ แฎแแแฝ แจแแธแจแแต แแต แฐแแซแซแข
แแญแ แฅแฉแ แจแแ แแญแ แตแซแแแญแณแ แแแ แแ แจแตแแต
แแฐแฅ แซแ แแแข
.
2. Trapezoidal Combined Footing - แแแฑ แฎแแแฝ แจแแธแจแแต แแต แแฉแแต แจแฐแแแ แจแแ แแแข
.
Strap/ Cantilever Footing - แแแต แแถแฝแ แ แขแ แ แแซแซแ
แแต แจแ แแฑ แแต แแฐแแแ แฅแแฒแฐแแแ แแตแจแ แฅแแฝแแแแกแก
แขแ แ แซแฑ แแต แ แญแธแจแแ แแต แซแตแฐแแแแ
แฅแแโฆโฆ.แฅแแแ แ แจแแแ แแแ แฎแแแน แจ7 แแตแญ แ แแญ แจแฐแซแซแ combined footing แฅแแ แแ แขแฎแแแซแ แตแแแแแ แแถแนแ แ แขแ แ แแซแซแ แฅแแฐ combined footing
แแแ แแแฃแธแ แฅแแฝแแแแกแก
.
Mat/ Raft foundation - แฅแแแ แ แจแแแ แแแ แแฌแฑ
แจแแธแจแ แ แ แ แตแแฝ แจแแแ spread footing แตแแ แแ
แจแ แแธแแ แตแแต แจ50 แแญแฐแแต แ แแญ แจแธแแแต แแ โฆ.. แ แแณแแด
แแ spread footing แจ50 แแญแฐแแต แ แแญ แขแธแแแตแ แ
spread footing negative reinforcement แตแแแแ แแ แจ Mat แญแแ แขแฎแแแซแ แแแ แญแฝแแ - แแญแแซแฑแ Mat
negative & positive reinforcement แญแ แแแแกแก แแ แขแฎแแแซแ แฅแแฐแแ แผแญ แแตแจแ แจแขแแ แแฉ แตแญแป แแแกแก
.
๐แผแญ แ แแตแจแ แแแแ แซแแฉแข
.
โShallow Foundation-แฅแแแ แ แแแแดแฝแแฝ แจแแแ แแแ แ แแฉ แฅแแ แณแญแแแญ แ แ แญแฅ แฅแแแต แ แแซแซ แจแ แแญ แแแณ แซแ แแแกแก แแแแแฃแต แตแแแ แแบแแฝ แ แซแตแแแแ แฅแ แฝแแณแ แ แญแ แญแแ::
.
Spread/ Pad/ Isolated Footing - แ แแต แฎแแ แฅแป แแ
support แจแแซแฐแญแแต- แจแแแฃแแ แแญแต eccentricity แแฐแจแต แ แแตแจแ circular/ rectangular or square แจแแ แ แญแ แแแซแธแ แญแฝแแแกแก แซแแแฎ แแแแก แญแฝแแ แแแณแ แแฑแ slopped แ แแตแจแ::
.
Combined Footing - แแแตแ แจแ แ แแญ แฎแแแฝแ แ แ แแต แแต
support แแแตแจแ แแ แจแแแ แแแฃแธแแกแก แฅแแแ แ
แจแแแ แแแ แแแต แฐแแซแซแข Isolated Footing แซแ แแแฑแ
แ แแต แแญ combine แ แแตแจแ แฎแแญแชแตแ แแฎแ แดแญ แแตแจแ
แฅแแฝแแแแกแก แ แฐแจแแชแ isolated แแแ แแ property
limit แซแ แฅแแแ แ แแ แแ แฅแแฝแแแ:: 2 แ แญแแต Combined
Footing แ แ- แฅแแญแฑแ แก-
.
1. Rectangular Combined Footing โ แญแ แแ แจแแแ แแแ แแแฑแ แฎแแแฝ แจแแธแจแแต แแต แฐแแซแซแข
แแญแ แฅแฉแ แจแแ แแญแ แตแซแแแญแณแ แแแ แแ แจแตแแต
แแฐแฅ แซแ แแแข
.
2. Trapezoidal Combined Footing - แแแฑ แฎแแแฝ แจแแธแจแแต แแต แแฉแแต แจแฐแแแ แจแแ แแแข
.
Strap/ Cantilever Footing - แแแต แแถแฝแ แ แขแ แ แแซแซแ
แแต แจแ แแฑ แแต แแฐแแแ แฅแแฒแฐแแแ แแตแจแ แฅแแฝแแแแกแก
แขแ แ แซแฑ แแต แ แญแธแจแแ แแต แซแตแฐแแแแ
แฅแแโฆโฆ.แฅแแแ แ แจแแแ แแแ แฎแแแน แจ7 แแตแญ แ แแญ แจแฐแซแซแ combined footing แฅแแ แแ แขแฎแแแซแ แตแแแแแ แแถแนแ แ แขแ แ แแซแซแ แฅแแฐ combined footing
แแแ แแแฃแธแ แฅแแฝแแแแกแก
.
Mat/ Raft foundation - แฅแแแ แ แจแแแ แแแ แแฌแฑ
แจแแธแจแ แ แ แ แตแแฝ แจแแแ spread footing แตแแ แแ
แจแ แแธแแ แตแแต แจ50 แแญแฐแแต แ แแญ แจแธแแแต แแ โฆ.. แ แแณแแด
แแ spread footing แจ50 แแญแฐแแต แ แแญ แขแธแแแตแ แ
spread footing negative reinforcement แตแแแแ แแ แจ Mat แญแแ แขแฎแแแซแ แแแ แญแฝแแ - แแญแแซแฑแ Mat
negative & positive reinforcement แญแ แแแแกแก แแ แขแฎแแแซแ แฅแแฐแแ แผแญ แแตแจแ แจแขแแ แแฉ แตแญแป แแแกแก
.
๐แผแญ แ แแตแจแ แแแแ แซแแฉแข
๐5
๐Mat(raft) foundation
โก๏ธCommonly two types of mat foundation are available.
โ Ribbed mat( beam and slab mat)
โ solid mat ( flat slab mat )
โก๏ธ Ribbed mat can be described simply as an inverted solid slab subjected to bearing pressure as load.
โก๏ธ solid mat( uniform depth mat ) can be described as a flat slab subjected to bearing pressure as load.
โก๏ธCommonly two types of mat foundation are available.
โ Ribbed mat( beam and slab mat)
โ solid mat ( flat slab mat )
โก๏ธ Ribbed mat can be described simply as an inverted solid slab subjected to bearing pressure as load.
โก๏ธ solid mat( uniform depth mat ) can be described as a flat slab subjected to bearing pressure as load.
๐1
ัะฝัฮฑั ฦฮฑฮนโฯ
ัั
๐shear failure is sudden and brittle failure. The failure is with diagonal cracks occuring some distance from the face of support.
๐on any given section shear and flexure occur at the same time( except point with either shear or moment is zero). The interaction of the two stresses, if the principle of stress transformation is followed, develop tension and shear at an angle different from 0 or 90ยฐ.
๐The diagonal tension resulting from interaction of shear and flexure is responsible for shear failure.
๐beams without shear reinforcement faile in one of the five modes:
โ๏ธdiagonal tension
โ๏ธshear compression
โ๏ธshear tension
โ๏ธweb crushing and
โ๏ธarch rib failure.
๐The failure mode likely to occur depends on:
โ๏ธmoment to shear ratio( M/V),
โ๏ธ type of loading(concentrated or distributed)
โ๏ธbeam cross section.
๐ concrete without shear reinforcement resists shear by the contribution of:
โ๏ธconcrete uncracked section,
โ๏ธaggregate interlock and
โ๏ธdue to dowel action of longitudinal reinforcement.
๐shear failure is sudden and brittle failure. The failure is with diagonal cracks occuring some distance from the face of support.
๐on any given section shear and flexure occur at the same time( except point with either shear or moment is zero). The interaction of the two stresses, if the principle of stress transformation is followed, develop tension and shear at an angle different from 0 or 90ยฐ.
๐The diagonal tension resulting from interaction of shear and flexure is responsible for shear failure.
๐beams without shear reinforcement faile in one of the five modes:
โ๏ธdiagonal tension
โ๏ธshear compression
โ๏ธshear tension
โ๏ธweb crushing and
โ๏ธarch rib failure.
๐The failure mode likely to occur depends on:
โ๏ธmoment to shear ratio( M/V),
โ๏ธ type of loading(concentrated or distributed)
โ๏ธbeam cross section.
๐ concrete without shear reinforcement resists shear by the contribution of:
โ๏ธconcrete uncracked section,
โ๏ธaggregate interlock and
โ๏ธdue to dowel action of longitudinal reinforcement.
๐3โค1๐ข1