Ethio Construction Engineering
32.3K subscribers
6.27K photos
359 videos
1.99K files
3.33K links
🔨 World Construction Engineering
Latest updates, tips, and tutorials on building, civil engineering, and construction in World.
Learn, build, and grow with us!

📨 @Philemona7 Or @ETCONpBOT

For Ad:- https://telega.io/c/etconp
Download Telegram
Forwarded from Ethio Construction Engineering (जॉर्डनो ג׳ורדנו ጆርዳኖ جوردانو จอร์แดโน่ JORDANO Ιορδάνοςஜார்டானோ)
👍1
Soil texture refers to the amount – and size – of clay, sand and silt particles in a sample of soil. It’s an important property for soil – it can tell you how much water and nutrients that soil can hold, how fast soil will drain, how much air is in the soil and how deep your grass roots extend. Your soil make up can also give a good idea about how your turf grass will grow by where it falls on the soil texture triangle.   

ይነበብ/Read on

PDF download ማድረግ የማትፈልጉ እታች 👇🏾👇🏾instant view ማለት “ፈጣን እይታ “ ማለት ነው instant view የሚለውን ስትጫኑት በ microsecond ልዩነት ወደ page’ሁ ይወስዳችዋል data ቢያልቅባችውም አንዴ ከከፈታችሁት data አጥፈታችው ደጋግማችው ማየት ትችላላችሁ ወደሌላ website አይወስዳችሁም load’ም አያደርግም በmicrosecond ልዩነት ወደሌላ page ይወስዳችኋል።

https://telegra.ph/What-is-soil-texture-Classification-system-of-soil-texture-04-26
Forwarded from Ethio Construction Engineering (Fîłmøñ Łûël)
❇️የውሃ ጋኖች (water supply Reservoir)
.
የውሃ ጋኖች ከጥቅማቸው አንፃር ለ ሶስት ይከፈላሉ 
.
1-Collector reservoir
2-Service reservoir
3-Supply reservoir
.
እያንዳንዱ ጥቅማቸው ምንድነው……
✅1 [Collector reservoir ]
.
ይህ የጋን አይነት ዋና ስራው ውሃው ከሚመነጭበት (የገጸ ምድር ወይም የከርሰ ምድር ውሃ) ቦታ ህክምና ከተደረገለት በኋላ የሚቀመጥበት ጋን ነው፡፡ ጥቅሙ የተሰበሰበውን ውሃ ወደተለያዩ ጋኖች እስኪሰራጭ በጊዜያዊነት እንዲቀመጥና ውሃው ለጋኖቹ እንዲደርስ የሚያደርገውን ጉልበት እንዲያገኝ ይረዳዋል፡፡ ብዙን ጊዜ ውሃው ከሚመነጭበት ቦታ አቅራቢያ ይተከላል፡፡ ውሃ ፈሳሽ እንደመሆኑ ብዙን ግዜ ሚፈልቀው ከፍታቸው ካነሱ ቦታዎች ስለሆነ ከሌሎች ጋኖች ይልቅ የዚህ ጋን ከፍታ (elevation) ያንሳል፡፡
.
✅2 [Service reservoir]
.
ይህ የጋን አይነት በቋሚነት ከcollecter reservoir የተቀበለውን ውሃ የሚያርፍበት ነው፡፡ አሰራሩም ከሌሎቹ ጋኖች ለየት ይላል ፡፡ ውሃው የሚያደርስበትን ግፊት ለመቋቋም የሚያስቸለውን መካች ጉልበት(reaction force) በበቂ ሁኔታ እንዲኖረው ይደረጋል፡፡ በቁመትም በመጠንም ትልቅ ነው፡፡ ወጪ ለመቀነስ ከፍ ካለ ቦታ ይተከላል (ውሃ በ3 አይነት መንገድ ይከፋፈላል
.
1-የሞተር ሀይልን በመጠቀም

2-የመሬት የመሳብ ሃይልን (gravity force) በመጠቀም።

3-የሞተር ሃይልንና የመሬት የስበት ሃይልን በማጣመር በመጠቀም እንዲሰራጭ ይደረጋል፡፡
፡
በአሁን ጊዜ ሶስተኛው አማራጭ በስፋታ አገልግሎት ላይ ይውላል ይህ አማራጭ ከወጪም አንፃር በጣም ተመራጭ ነው ለዚህ ዘዴ ተመራጩ ደግሞ የservice reservoir ከፍ ካለ ቦታላይ መተከል ወሳኝነት አለው፡፡)
ከዚህ ጋን ቀጥታ ለስርጭት ቧንቧ አይገጠምም ምክንያቱም ከጋኑ የሚወጣው ውሃ ከፍተኛ ጉልበት ስላለው የማሰራጫ ቱቦዎችን ሊያፈነዳ ይችላል፡፡ ይህን ችግር ለመፍታት ቀጣዩን የጋን አይነት መገንባት አስፈላጊ ነው፡፡
.
✅3.[Supply reservoir]
፡
የዚህ ጋን ዋና ጥቅም ውሃውን ለስርጭት ወደ ስርጭት ቱቦዎች እንዲገባ ማድረግ ነው፡፡ ከላይ እንደጠቀስኩት ከሰርቪስ ጋን ቀጥታ ወደ ስርጭት ቧንቧ ውሃ አይገባም ምክንያቱም ከፍተኛ ሀይል ስላለው የቧንቧዎቹን የመቆየት አቅም ያሳጥራል ብሎም እስከ ማፈንዳት ያደርሳል፡፡ ይህ እንዳይከሰት የሳፕላይ ጋኖች ይገነባሉ፡፡ ይህ ጋን በቱቦዎቹ የሚያልፈውን ውሃ ግፊት በመቀነስና ፈጥነቱን (velocity) ከ 0.5-2 m/s በማድረግ እና ወደ ቱቦዎቹ የሚገባን ሃይል በመቀነስ (Energy dissipate ) ቱቦዎቹ ላይ የሚደርሰውን ጉዳት ያስወግዳል፡፡ ይህ ጋን ከፍ ባለ ቦታ ይተከላል ነገር ግን ከፍታው ከService reservoir ያነሰ ነው። እናመሰግናለን።
፡
▶️SHARE SHARE SHARE
Forwarded from Ethio Construction Engineering (Fîłmøñ Łûël)
*Stress* vs *strain*
Stress is the ratio of applied force F to a cross section area - defined as "force per unit area".
tensile stress - stress that tends to stretch or lengthen the material - acts normal to the stressed area
compressive stress - stress that tends to compress or shorten the material - acts normal to the stressed area

shearing stress - stress that tends to shear the material - acts in plane to the stressed area at right-angles to
compressive or tensile stress

Tensile or Compressive Stress - Normal Stress

Tensile or compressive stress normal to the plane is usually denoted "normal stress " or "direct stress " and can be
expressed as
σ = F n / A (1)
where
σ = normal stress (Pa (N/m 2 ), psi (lb f /in 2 ))
F n = normal force acting perpendicular to the area (N, lb f)
A = area (m 2 , in 2 )
a kip is an imperial unit of force - it equals 1000 lb f (pounds-force)
1 kip = 4448.2216 Newtons (N) = 4.4482216 kilo Newtons (kN)

A normal force acts perpendicular to area and is developed whenever external loads tends to push or pull the two segments of a body.

Example - Tensile Force acting on a Rod A force of 10 kN is acting on a circular rod with diameter 10 mm . The stress in the rod can be calculated as

σ = (10 10 3 N) / (π ((10 10 -3 m) / 2) 2 )
= 127388535 (N/m 2 )
= 127 (MPa)

Example - Force acting on a Douglas Fir Square Post A compressive load of 30000 lb is acting on short square 6 x 6 in post of Douglas fir. The dressed size of the post is 5.5 x 5.5 in and the compressive stress can be calculated as

σ = (30000 lb) / ((5.5 in) (5.5 in))
= 991 (lb/in 2 , psi)

Shear Stress
Stress parallel to a plane is usually denoted as "shear stress "and can be expressed as

τ = F p / A (2)
where
τ = shear stress (Pa (N/m 2 ), psi (lb f /in 2 ))
F p = shear force in the plane of the area (N, lb f)
A = area (m 2 , in 2 )
A shear force lies in the plane of an area and is developed when external loads tend to cause the two segments of a body to slide over one another.

@etconp
Forwarded from Ethio Construction Engineering (जॉर्डनो ג׳ורדנו ጆርዳኖ جوردانو จอร์แดโน่ JORDANO Ιορδάνοςஜார்டானோ)
This media is not supported in your browser
VIEW IN TELEGRAM
የከበሩ ድንጋዎች ወደ Damptruck ሲጫን እንዲህ ነው፤ ተመልከቱ ! #damptruck#equipment


📹8.4MB(WiFi ቢሆን ይመረጣል)

@etconp
▶️ Doubly reinforced beam
.
👉beams with tension reinforcement only( reinforcement to assist concrete carry tension) are called singly reinforced beams

👉 due to different reasons, it isn't always possible to use singly reinforced beam and it becomes necessary to assist concrete to carry compression too. And beams with both tension and compression reinforcement are called doubly reinforced beams.

▶️ doubly reinforced beams are advantageous over singly reinforced beams for the following reasons :

*Reduces sustained deflection( long term deflection)

* Increases ductility

* Enhances tension mode of failure

* Decreased depth of section, leading to astetics

@etconp

Facebook:- https://www.facebook.com/etconp/
Forwarded from Ethio Construction Engineering (Fîłmøñ Łûël)
👉Types of Benchmarking
.
▶️There are four primary types of benchmarking: internal, competitive, functional, and generic.
.
1. Internal benchmarking is a comparison of a business process to a similar process inside the organization.
2. Competitive benchmarking is a direct competitor-to-competitor comparison of a product, service, process, or method.
3. Functional benchmarking is a comparison to similar or identical practices within the same or similar functions outside the immediate industry.
4. Generic benchmarking broadly conceptualizes unrelated business processes or functions that can be practiced in the same or similar ways regardless of the industry.

@etconp
Forwarded from Ethio Construction Engineering (जॉर्डनो ג׳ורדנו ጆርዳኖ جوردانو จอร์แดโน่ JORDANO Ιορδάνοςஜார்டானோ)
How to read contour lines on topographic maps

@etconp
Forwarded from Ethio Construction Engineering (Fîłmøñ Łûël)
▶️ስለ Grouting ኣብረን እንይ
.
👉Grouting is a method of filling up and repair of cracks in concrete.
Step by step grouting procedure needs to be followed for effective repair of concrete cracks.
Grouting Procedure for Repair of Cracks in Concrete Structures: Procedure of grouting for repair of concrete cracks in structures are:
1. Holes are drilled in structure along cracks and in an around hollow spots.
2.If there are several cracks, holes can be drilled in a staggered manner at 500 to 750mm spacing in both directions covering adequately the area proposed to be grouted.
Holes spacing can be altered as per site conditions.
3. G.I. pieces (12 to 20mm dia x 200mm) with one end threaded or PVC nozzles are fixed in the holes with rich cement mortar.
4. All the cracks and annular space around G.I. pipes are sealed with rich cement mortar.
5. All the cracks are cut open to a ‘V’ shaped groove, cleaned & sealed with rich cement mortar.
6. All the grout holes should be sluiced with water using the same equipment a day before grouting as per following sequence; so as to saturate the masonry.
All holes are first plugged with proper wooden plugs or
locked in the case of PVC nozzles. The bottom most
plug and the two adjacent plugs are removed and
water injected in the bottom most hole under pressure.
When the clear water comes out through the adjacent
holes the injection of water is stopped and the plugs in the
bottom most hole and the one immediately above are
restored.
The process of grouting of concrete cracks is repeated with other holes till all the holes are covered.
On the day of grouting all the plugs are removed to drain out excess water and restored before commencing grouting.
The same sequence as described above is adopted for
injecting the cement grout also.
The grout is kept fully stirred/ agitated under pressure throughout the grouting.
The grouting is carried out till refusal and/ or till grout starts flowing from the adjacent hole.
A proper record of the quantity of grout injected into every hole should be maintained.
After grouting, curing should be done for14 days. Tell tales
are provided for checking the effectiveness of grouting.
Only such quantities of material for preparing grout should be
used, as can be used within 15 minutes of its
mixing. Grouting equipment must be cleaned thoroughly after
use.

@etconp
Forwarded from Ethio Construction Engineering (Fîłmøñ Łûël)
Things Site Engineers Must Know About Reinforcement and
Steel Bars
.
Clear cover to main reinforcement
.
Footings : 50 mm
Raft foundation Top : 50 mm
Raft foundation Bottom/ sides : 75 mm
Strap Beam : 50 mm
Grade Slab : 20 mm
Column : 40 mm (d>12mm) 25 mm (d= 12mm)
Shear Wall : 25 mm
Beams : 25 mm
Slabs : 15 mm or not less than diameter of the bar.
Flat Slab : 20 mm
Staircase : 15 mm
Retaining Wall on Earth : 20/ 25 mm
Water retaining structures : 20 / 30 mm
Sunshade (Chajja) : 25 mm
.
Hook for stirrups is 9D for one side
No. of stirrups = (clear span/Spanning) + 1
.
For Cantilever anchorage length for main steel is 69D
.
“L” for column main rod in footing is minimum of 300mm
.
Chairs of minimum 12 mm diameter bars should be used.
.
Minimum diameter of dowel bars should be 12 mm.

@etconp
Forwarded from Ethio Construction Engineering (Fîłmøñ Łûël)
▶️Flexural Strength vs Tensile Strength
.
👉Flexural Strength is the capacity of the concrete
(usually beams) to resist deformation under
bending moment. It is sometimes called Bending
Strength.
.
👉Tensile Strength is the capacity of concrete to resist
tension/stretched tight.
The similarity is that, by definition - They are both
concrete’s capacity in resisting deformation under
loads. But the loads to which they are resisting
are different.
Multi-modal bridge Design

For this example of multimodal bridge highway traffic travels on the upper level , while the lower level features high speed rail and light rail transit along with pedestrian and bike lanes

What do you think ?

እንዲህ አይነት ድልድይ ጠቀሜታው ብዙ ነው ከላይ የተሽከርካሪ ፍሰት ያለው ከስር ለ እግረኛ እና ለቀላል ባቡር መተላለፊያ ይሆናል

ምን ታስባላችሁ ?

@etconp

Facebook:-https://www.facebook.com/etconp/
Forwarded from Ethio Construction Engineering (Fîłmøñ Łûël)
👉ስለ የ joint ዓይነቶች አብረን እንይ
፡
▶️An expansion joint or movement joint is an
assembly designed to safely absorb the heat-
induced expansion and contraction of construction
materials, to absorb vibration, to hold parts
together, or to allow movement due to ground
settlement or earthquakes. They are commonly
found between sections of buildings, bridges ,
sidewalks, railway tracks, piping systems, ships,
and other structures.
Building faces, concrete slabs, and pipelines
expand and contract due to warming and cooling
from seasonal variation, or due to other heat
sources. Before expansion joint gaps were built into
these structures, they would crack under the stress
induced.
.
▶️Control joints, or contraction joints, are sometimes
confused with expansion joints, but are completely
different in purpose and function. Control joints are
cut into pavement at regular intervals to control
cracking. Concrete and asphalt have relatively
weak tensile strength, and typically form cracks as
they age, shrink, and are exposed to environmental
stresses (including stresses of thermal expansion
and contraction). Without the control joint, cracking
can occur in a random fashion, and compromise
the surface of the structure. This is primarily an
aesthetic issue. Control joints attenuate the
cracking in a more controlled fashion. The cracks
will tend to form along the cut planes that makes
up the control joints.
.
▶️A construction joint occurs when there are multiple
concrete placements. It can occur between different
days of concrete placements as shown below.
There is a construction joint between the placement
of a footing and the placement of the column.

@etconp

Facebook:- https://www.facebook.com/etconp/
👍1
Forwarded from Ethio Construction Engineering (Fîłmøñ Łûël)
👉ስለ STAIRS ትንሽ ጠቃሚ ሃሳብ እንማማር 👇
.
▶️Calculations for the construction of stairs, ramps and guards are set out in various national building regulations. The guidelines here are based on German standards.
.
▶️Dwellings with no more than two flats must have an effective stair width of at least 0.80 m and 17/29 rise-to-tread ratio. Stairs which are not strictly covered by building regulations may be as little as 0.50m wide and have a 21/21 ratio. Stairs governed by building regulations must have a width of 1.00m and a ratio of 17/28. In high rise flats they must be 1.25 m wide . The length of stair runs from 23 steps up to,,; 18 steps --> @. Landing length = n times the length of stride + 1 depth of step (e.g. with a rise-to-tread ratio of 17/29 = 1 x 63 + 29 = 92 cm or 2 x 63 + 29 = 1.55 m). Doors opening into the stairwell must not restrict the effective width.

▶️The time required for complete evacuation must be calculated for stair widths in public buildings or theatres. Such staircases or front entrance steps are climbed slowly, so they can have a more gradual ascent. A staircase at a side entrance or emergency stairs should make a rapid descent easy.
.
▶️The experiences one has of ascending and descending stairs varies greatly with the stair design, for example there is a significant difference between an interior domestic design and a grand flight of entrance steps. Climbing stairs takes on average seven times as much energy as walking on the flat. From the physiological point of view, the best use of 'climbing effort' is with an angle of incline of 30° and a ratio of rise of: rise of step/going of step; r/g= 17/29.
.
▶️The angle of rise is determined by the length of an adult's stride (about 61-64cm). To arrive at the optimum rise, which takes the least energy, the following formula can be applied:
2r+ g= 63cm (1 stride)
.
▶️In the dimensioning and design of flights of stairs, the function and purpose of the staircase is of primary importance, taking in the factors mentioned above.
.
▶️Not only is the gaining of height important, but also the way that the height is gained. For front door steps in frequent use, low steps of 16 x 30cm are preferable. However, stairs in a workplace, or emergency stairs, should enable height to be gained rapidly. Every main staircase must be set in its own continuous stairwell, which together with its access routes and exit to the open air, should be designed and arranged so as to ensure its safe use as an emergency exit. The width of the exit should be greater than or equal tothe width of the staircase.

Source: Neufert,Architect's data

@etconp
❤1👍1
Forwarded from Ethio Construction Engineering (जॉर्डनो ג׳ורדנו ጆርዳኖ جوردانو จอร์แดโน่ JORDANO Ιορδάνοςஜார்டானோ)
What is the reason for this give valid reason? Use discussion group

@etconp
Forwarded from Ethio Construction Engineering (Haroun Maju)
ASTU research guide.docx
19.2 KB
▶️ሪሰርች ስትሰሩ ኣጋዥ ነው ተጠቀሙበት፡፡

@etconp
❤1
Forwarded from Ethio Construction Engineering (जॉर्डनो ג׳ורדנו ጆርዳኖ جوردانو จอร์แดโน่ JORDANO Ιορδάνοςஜார்டானோ)
G+1 ARCHITECTURAL@ETCONP.dwg
13.2 MB
Architectural drawing for holistic project you can see the pervious drawing(original one) and modified one

Prepared by:- AUTOCAD 2007

@etconp
👍1
Forwarded from Ethio Construction Engineering (जॉर्डनो ג׳ורדנו ጆርዳኖ جوردانو จอร์แดโน่ JORDANO Ιορδάνοςஜார்டானோ)
Structural design etabs@etconp.EDB
110.2 KB
Structural design for holistic project . This design file is automated

Prepared by :- ETABS 2017

@etconp
Forwarded from Ethio Construction Engineering (जॉर्डनो ג׳ורדנו ጆርዳኖ جوردانو จอร์แดโน่ JORDANO Ιορδάνοςஜார்டானோ)
G+1 STRUCTURAL @ETCONP.dwg
4.5 MB
Structural drawings for holistic project

Prepared by :- 2007 autocad

@etconp