Ethio Construction Engineering
32.3K subscribers
6.28K photos
359 videos
1.99K files
3.36K links
🔨 World Construction Engineering
Latest updates, tips, and tutorials on building, civil engineering, and construction in World.
Learn, build, and grow with us!

📨 @Philemona7 Or @ETCONpBOT

For Ad:- https://telega.io/c/etconp
Download Telegram
👉TYPES OF DRAWINGS USED IN BUILDING
CONSTRUCTION @COTMp
~~~~~~~~~~~~~~~~
⏩Drawings are the most important things we need to start any construction project. There are different
types of drawings for different purposes. In this
article, we will discuss different types of
construction drawings (also known as working
drawing).
*Construction drawings provide detail measurements and clear section of every building parts.
After reviewing, the drawings are justified and modified and finally approved for construction. *The different types of construction drawings are listed below.👇
.
1 ARCHITECTURAL DRAWING: This type of drawing provides complete view of a building. It demonstrates the location of building and all building parts where they will be placed.
*There are different types of architectural drawings
with different names such as plan, elevation, section
etc.
.
2 STRUCTURAL DRAWING:
As the name suggests, this type of drawing provides information about structure, like strength of
different structural elements, structural materials, grade, size and placement of reinforcement etc.
.
3 ELECTRICAL DRAWING:
This type of drawings provide the details and
location of electrical wiring, fixtures, substation
etc. The electrical load calculation is also given in
the drawing.
.
4 PLUMBING AND SANITARY DRAWINGS:
These drawings give the location of sanitary, piping
for water supply system, fixture, and the process to
connect every fixture etc.
.
👇👇👇👇👇
Join for more updates via the link below;
t.me/COTMp
👆👆👆👆👆
⚡ አሁኑኑ Join በማረግ እና ለጓደኛዎ እና ለሚያቁት ሁሉ ሼር ያድርጉ።
Check out our digital library link below

Digital library’ኣችንን ለመጎብኘት እታች ያለውን link ይጫኑ

@ETCONpDigitalLibrary_Bot
Forwarded from Ethio Construction Engineering (Fîłmøñ Łûël)
👉ኣሁን ደሞ Unit Weight Of Building Materials እንይ @COTMp
.
*Water- 1000 Kg/ m3
*Bricks (broken) - 1420 Kg/ m3
*Bricks(common) -1600 Kg/ m3
*Cement(ordinary)- 1440 Kg/ m3
*Cement (rapid hardening)- 1250 Kg/ m3
*Cement Mortar - 2000 Kg/ m3
*Cement Concrete (Plain) - 2400 Kg/ m3
*Cement Concrete (Reinforced) -2500 Kg/ m3
*Glass - 2500 Kg/ m3
*Lime Concrete - 1900 Kg/ m3
*Cement Plaster - 2000 Kg/ m3
*Lime Plaster - 1700 Kg/ m3
*Stones (Ballast) - 1720 Kg/ m3
*Stones (Aggregates)- 1750 Kg/ m3
*Stones (Basalt)- 2850 Kg/ m3
*Stones (Granite) - 2450 Kg/ m3
*Stones (Marble)- 2650 Kg/ m3
*Timber (Oak, Sal) - 510 Kg/ m3
*Timber (Mango) - 650 Kg/ m3
*Timber (Teak)- 625 Kg/ m3
*Coal- 600 Kg/ m3 *Plastics- 1250 Kg/ m3
*Oils- 800 Kg/ m3
*Ashes- 650 Kg/ m3
*Clinker- 750 Kg/ m3
*Rubber- 1300 Kg/ m3
*Slag- 1500 Kg/ m3
*Clay Soil- 1900 Kg/ m3
*Sand (dry) - 1540 to 1600 Kg/ m3
*Sand (wet)- 1760 to 2000 Kg/ m3
*Steel- 7850 Kg/ m3
*Chalk- 2100 Kg/ m3
*Bitumen- 1040 Kg/ m3
.
👇👇👇👇👇
Join for more updates via the link below;
t.me/COTMp
👆👆👆👆👆
⚡ አሁኑኑ Join በማረግ እና ለጓደኛዎ እና ለሚያቁት ሁሉ ሼር ያድርጉ።
👉Water we used for mixing Concrete @COTMp
.
◇ water is needed for two purposes:
1. Chemical Reaction with cement
2. Workability
□ water is good for preventing plastic shirnkage
cracking and workability.
.
■ Water is bad for permeability, strength, durability.
.
● Impurities in mixing water may cause:
○ Abnormal setting time
○ decreased strength
○ Volume changes
○ Efflorescence
○ Corrosion of reinforcement
.
⚡ አሁኑኑ Join በማረግ እና ለጓደኛዎ እና ለሚያቁት ሁሉ ሼር ያድርጉ።
Properties of R.C.C./✔Requirement of Good R.C.C.
1. It should be capable of resisting expected tensile, compressive, bending and shear forces.
2. It should not show excessive deflection and spoil serviceability requirement.
3. There should be proper cover to the reinforcement, so that the corrossion is prevented.
4. The hair cracks developed should be within the permissible limit.
5. It is a good fire resistant material.
6. When it is fresh, it can be moulded to any desired shape and size.
7. Durability is very good.
8. R.C.C. structure can be designed to take any load.
What is the name of these test performed on a ground surface?
Anonymous Quiz
33%
Field density test
37%
Plate load test
18%
Proctor compaction test
12%
Cone penetration test
It is called a plate load test/ plate bearing test.

Plate load test is used for determining the ultimate bearing capacity of the ground and the likely settlement under a given load.

After backfilling and compacting the built up ground surface with a structural fill material upto the formation level, Plate load test is performed to check the amount of settlement under proposed design load.

A plate diameter of 457mm,loading jack and dial guages are used. A heavy loader machinery is used as a reaction load. An incremental loading and unloading is applyed by a means of a loading jack. A technician will be holding a timer and each loading/unloading will change every 15 mins. The corresponding settlement Is read from a dial gauge. 3 dial gauges at different angles are placed and the average reading from this dial guage is used as a governing reading.

A graph is drawn showing the load vs settlement. The corresponding settlement at the allowable bearing pressure is taken.

The settlement obtained is checked whether it is below the allowable settlement . For instance the allowable settlement for a raft foundation is 75mm.

Note regarding PLT
-performing PLT below a shallow foundation prior to construction is important.
-if the result of test is not satisfactory, all the structural fill material is removed and replaced with another material and compacted again.
- PLT is approximate analysis. It gives bearing capacity of soil upto limited depth only.

The part of report is from our project is shown below and clearly shows settlement vs the load.👷‍♂️✌

@etconp
👍1
📖✔IMPORTANT POINTS FROM THERNAL STRESSES (STRENGTH_OF_MATERIALS)

✔ Stresses produced due to change in temperatures(Rise/Fall) are called as thermal stresses

✔ Actual meaning of coefficient of thermal expansion is strain produced per unit change in temperature

✔Unit of Coefficient of thermal expansion = per degree celcius

✔ Coefficient of thermal expansion for different materials
✴ Aluminium = 24 x 10^(-6)
✴ Copper = 17.5 x 10^(-6)
✴ Steel = 12 x 10^(-6)

✔Higher the value of coefficient of thermal expansion, more will be the material sensitive for temperature change

✔For the bar free to expand, with change in temperature (rise/fall), no stress is developed

✔Prismatic bar with rigidly supported at both ends
✔ As temperature increases, compressive stresses are developes on bar
✔ As temperature decreases, tensile stresses are developes on bar

✔ Copper bar is in series with steel bar
✔ As temperature increases, compressive stresses are developed on both copper and steel bar
✔ As temperature decreases, tensile stresses are developed on both copper and steel bar

✔ Copper plate is in parallel with steel plate and form a composite
✔ As temperature increases, compressive stress developed on copper and tensile stress developed on steel
✔ As temperature decreases, tensile stress developed on copper and compressive stress developed on steel

✔ Copper rod is enclosed in steel tube and both are rigidly fixed at ends
✔As temperature increases, Compressive stresses are developes on both copper and steel
✔ As temperature decreases, tensile stresses are developes on both copper and steel.
👍1