Ethio Construction Engineering
32.3K subscribers
6.27K photos
359 videos
1.99K files
3.33K links
🔨 World Construction Engineering
Latest updates, tips, and tutorials on building, civil engineering, and construction in World.
Learn, build, and grow with us!

📨 @Philemona7 Or @ETCONpBOT

For Ad:- https://telega.io/c/etconp
Download Telegram
👉BASICS OF CRACKING PROBLEMS: @COTMp
.
▶The subject “ CRACKS “ or “ CRACKING “ in
concrete is indeed much debated. However, there is
inadequate clarity as to the reason for cracking and what may be done to limit its occurrence or
eliminate it altogether.
The phenomenon of the appearance of cracks in
concrete is often a subject that raises several
questions. Either at the initial stage or with time,
cracks may appear in a concrete structure. It should first of all be accepted that cracks of some type or other are inevitable in any concrete. They can be minimized to a large extent by proper practices.
*Cracks may be big or small, structural or non-
structural. All of them can be a nuisance by way of
either marring the appearance or function as a passage for atmospheric polluting gases and
moisture to either the body of concrete and causes
distress.
*Cracks in the concrete structure do not always
mean that the structure is not usable. As cracking
of concrete is inherent, what really matters is the
type of structure and the nature of cracking. Cracks
that are acceptable for building structures may not be acceptable for water relating structures.
Considering that cracking can never be completely
eliminated, it is necessary to be aware of the
causes, evaluation and the methods of repair
whoever required.
CRACKS Cracks are generally of tow types : Structural and nonstructural
*Cracks can occur in hardened or unhardened concrete.
*STRUCTURAL CRACKS
It is fundamental that hardened reinforced concrete cracks in the tensile zone when subjected to externally imposed structural loads. By means of appropriate design and detailing technique, these cracks can be limited to acceptable levels in terms
of structural integrity and aesthetics.
*NON_STRUCTURAL CRACKS
**Concrete is also liable to crack in both the plastic
and hardened states due to the nature of its
constituent materials. These intrinsic cracks are as inevitable as structural cracks. It is often possible
to predict when intrinsic cracks are likely and to
limit them to acceptable levels by means of good
design and/or proper construction techniques.
*DORMANT AND LIVE CRACKS:
Cracks caused by shrinkage, temperature gradient due to hydration and alkali silica reaction ( ASR ) are less dangerous the cracks caused by thermal expansion and loads. This is because shrinkage and hydration temperature gradient result in dormant cracks ( where the width does not vary with time) and other mechanisms result in live
cracks (where the width increases with time
Dormant cracks, especially narrow ones, are more
likely to undergo auto genius healing and
realkalisation. The crack may heal owing to
following conditions:
• carbon dioxide diffusing into the crack leading to
carbonation of the calcium hydroxide and
precipitation of calcium carbonate.
• Cement hydration due to presence of moisture.
• Hydration diffusing from the bulk concrete into the
heaked zone thereby increasing the pH in that area.
Live cracks are more likely than domant ones. They
result in collection of debris at the base owing to movement of the sides on the cracks. This can
impede temporarily the passage of depassivating
substances to the reinforcements. However,
autodeneous healing is unlikely with live cracks.
▶CAUSES OF CRACKING:
Cracking will occur whenever the applied strain exceeds the tensile strain capacity of the concrete.
*The tensile strain capacity of concrete varies with age and with
Age at which cracks may occur.
*Cracks can appear at any time. The age which
some typical can occur are given in the Table.
▶TABLE – AGE AT WHICH CRACKS MAY APPEAR:
*Sr. no. types of cracks Age
1. plastic shrinkage First few minutes or hours after
concreting .
2. plastic settlement First few minutes or hours
after concreting.
3. due to corrosion After one year or many years.
4. due to loads After loads are imposed and the
time duration of loading.
👇👇👇👇👇
👆👆👆👆👆
🇪 🇫 🇫 🇱 🇴 🇷 🇪 🇸 🇨 🇪 🇳 🇨 🇪

Efflorescence is one type of defect found on plaster surface. Efflorescence is the whitish crystalline substance which appears on the surface of walls due to presence of soluble salts, such as suphates of sodium, calcium and magnesium.

WHY EFFLORESCENCE HAPPENS ON PLASTER SURFACE?

Presence of salts in the lime, cement, sand, bricks and sometimes even in water used in construction work are the cause of efflorescence on plaster surface. After completion of plaster work and when it becomes completely dry; the soluble salts dissolved by moisture are drawn to the surface through pores. These soluble salts absorbs moisture from atmosphere and on drying, they get deposited in patches in form of white crystalline substance. The surface gets disfigured by ugly damp patches of efflorescence. This defect gradually disintegrates the structure. It is normally of temporary in nature as it disappears during wet weather and reappears during dry weather.

HOW TO RECTIFY EFFLORESCENCE OR WHAT ARE THE REMEDIES?

👉Efflorescent salts cannot be removed by washing with water as it may carry some of the salts back into the pore.

👉Dry brushing of the growth as it appears on the surface is one of remedies.

👉 The treatment of an old wall with silicon solution will frequently stop the efflorescence as the liquid blocks the passage for movement of moisture.

👉 When efflorescence is due to the rising of salt solutions through capillary action from subsoil; the only remedy is to provide bitumen or metallic seals in the walls above the ground level so that an effective barrier to the capillary action is created.

👉 In case of brickwork, the salt can be removed with a solution of zinc sulphate and water. The surface is brushed off when dry.

@etconp
👍2
Buckling types

#structure

@etconp
A. 1️⃣
B. 2️⃣
C. 3️⃣
D. 4️⃣

#stair
ለጓደኞቻችው ይህን Channel በማጋራት ቤተሰብ እናፍራ
@etconp

Facebook:- https://www.facebook.com/etconp/
❤1
Ethio Construction Engineering via @like
A. 1️⃣ B. 2️⃣ C. 3️⃣ D. 4️⃣ #stair ለጓደኞቻችው ይህን Channel በማጋራት ቤተሰብ እናፍራ @etconp Facebook:- https://www.facebook.com/etconp/
The answer for this question is

2R + T = 60

The answer is A. 1️⃣


@etconp
Forwarded from Ethio Construction Engineering (Selman💯®©)
👉ዛሬ ደሞ ስለ Load Combination በ ኣዲሱ የ EBCS ኮድ ኣብረን እንይ
.
Combo 1= DL + LL
Combo 2= 1.35DL + 1.5LL
Combo 3= DL + 0.3LL + EQx
Combo 4= DL + 0.3LL - EQx
Combo 5= DL + 0.3LL + EQy
Combo 6= DL + 0.3LL - EQy
Combo 7= max( Combo 2 up to 6)
.
.
ሁሌ ግን ኢሄ ነው ማለት አይደለም፡፡ ለምሳሌ 0.3LL የሚለው
ህንፃውን የምንጠቀመው ለDomestic/residential purpose
ከሆነ ነው፡፡ Shop ከሆነ 0.6LL storage ከሆነ ደሞ 0.8LL
ይሆናል፡፡ ከዚህም በተጨማሪ ሁሉም ፎርሙላ ላይ የተለያዩ
ኮንዲሽኖች ስላሉ እነሱን ማየት ያስፈልጋል፡፡ መገኛቸውም EBCS
EN 1990: 2014 ከ Equation 6.9 እስከ 6.16 ነው፡፡

ፎርሙላዎቹ ውስጥ የሚገቡትን variable ለማግኘት ደሞ
check the Annex part እዩት።
.
combination ሰባት ነው ዘጠኝ ነው ስላልኩት ደሞ ብዙዎች
Earth Quakeም እያለ በሁለትና በሶስት Combination ሲሰሩ
ስላየው ነው፡፡ እንጂ ግዴታ 7 ወይ ምናምን መሆን የለበትም፡፡
ለምሳሌ Serviceability ብቻ ኮንሲደር ካደረግን አንድ ኮምቦ //
ማለትም DL+LL// ሊበቃ ይችላል፡፡ ፅሁፉ ግልፅ ስላልሆነና
ወዳልሆነ አቅጣጫ እንዳይወሰድ አንስቼዋለው፡፡
.
👉ለተጨማሜ የ ኮንስትራክሽን እውቀቶች...
🚩 እዚህ ይጫኑ
👇👇👇👇👇
@COTMp
@COTMp
👍1👌1
What is the name of this shuttering equipment??
Anonymous Quiz
23%
Flange clamp
25%
Tie rod
37%
Props jack
15%
Ledger
Forwarded from Ethio Construction Engineering (Fîłmøñ Łûël)
👉Construction engineering Questions with Answers Part 1 @COTMp
.
Q1. What is the Unit Weight of concrete?
A:- The unit weight of concrete depends on the type of aggregates and amount of voids. As per IS : 456-200 Unit weight of PCC is 24KN/m3 and RCC
is 25KN/m3
Q2. What is the unit weight of Steel?
A. The unit weight of Steel is 78.5KN/m3
Q3. What are the Nominal Concrete Mix proportions
for different grades:
A. Important: C-15 - 1:2:4 and C-5 - 1:4:8,C-20 and C-25 - 1:2:3,
(Cement:Sand:aggregate)
Q4. What is ductility?
A. Ductility is the Ability to deform under tensile
stress.
Q5. How to find the weight of steel bar used in
reinforcement?
A. Weight of Bar in kg/m = Dsquare/162.2 D- Dia
of bar in mm
Q6. What’s the difference between one-way slab
and two-way slab?
A. One way slab: Ratio of Longer Span / Shorter
span > 2 Two way slab: Ratio of Longer span/ shorter span <= 2
Q7. What is flat slab?
A. The slab which is supported on columns (Flab slab don’t have beams)
Q8. What do you mean by One storeyed, Two
storeyed building?
A. The building which has two floors is called two
storeyed building.
Q9. What’s the height of each floor?
A. 3m
Q10. What’s the length of rise and tread in Stair
case?
A. Rise – 150mm to 200mm, Tread – 250mm to 300mm
Q11. What’s the slope of Staircase?
A. As per IS 456, the slope or pitch of stair should
be between 25 degrees to 40 degrees.
Q12. What do you mean by the moment of inertia?
A. A quantity expressing a body’s tendency to resist
angular acceleration, which is the sum of the
products of the mass of each particle in the body
with the square of its distance from the axis of
rotation.
Q13. What is a crank length in the slab?
A. The crank length in Slab is 0.42 D. Where D is
Depth of Slab- Top cover – Bottom Cover.
Q14. What are the types of a slump?
A. True Slump: The concrete mass after the test when slumps evenly all around without disintegration is called the true slump.
*Shear Slump: When one-half of the concrete mass
slide down the other is called the shear slump. This type of slump is obtained in a lean concrete mix.
*Collapse Slump: When the sample is collapsed due to adding excessive water, it is known as collapse slump.
*Zero Slump: For very stiff or dry mixes it does not
show any changes of the slump after removing the
slump cone.
Q15. What is honeycomb in concrete? How is it
formed? How to eradicate honey comb in concrete?
A. Learn about Honeycomb concrete –
Q16. What is grouting?
A. Grout is a fluid form of concrete which is used
to fill the voids.
Q17. What is allowable moisture content in Fine
aggregate for the concrete mix?
A. We won’t use the aggregate if its moisture
content is more than 5%.
Q18. What do you mean by segregation?
A. Segregation is a separation of cement, sand from aggregate. This is caused due to Water
cement ratio and when concrete is poured about
more than 1.5m
Q19. What is Seepage?
A. Slow percolation of water through soil is called
Seepage.
Q20. What is the Compressive Strength of brick?
A. Second class brick-70kg/cm2
First class brick-105kg/cm2 Fire brick-125kg/cm2
Q21. How do you check the quality of cement on
the site?
A. 1. Date of Mfg: Cement strength decreases with
its age.
2. Color: Colour should be grey with light greenish
shade and it should be uniform. Color gives an
indication of excess lime or clay.
3. Float test: A good cement won’t float if you
throw a cement in water.
4. When you put your hand in cement bag you
should feel cool.
Q22. 1BHK full form : 1 Bedroom, 1 Hall, 1kitchen
Q23. What are the Different types of Slabs?
A. There are 16+ different types of slabs –
Q24. What is Initial & final setting time of concrete?
A. Intial Setting time : 30mins, Final setting time : 10hrs
Q25. What is durability?
A. Ability to withstand under pressure is called
Durability.
Q26. What are the concrete tests?
A. Slump test, Compressive strength test, water permeability test, Water absorption test
🚩ይቀጥላል ...