Ethio Construction Engineering
32.3K subscribers
6.27K photos
359 videos
1.99K files
3.33K links
🔨 World Construction Engineering
Latest updates, tips, and tutorials on building, civil engineering, and construction in World.
Learn, build, and grow with us!

📨 @Philemona7 Or @ETCONpBOT

For Ad:- https://telega.io/c/etconp
Download Telegram
👉Mix design can be divided into following two categories
.
➡ 1. Design mix concrete
.
➡ 2. Nominal mix concrete.
.
1. DESIGN MIX CONCRETE:
.
*When the proportions of concrete ingredients are decided by adopting certain established relationships (based on assumptions from a lot
of experiments) to produce the concrete it is known as design mix concrete.
*In design mix concrete, it is assumed that compressive strength of concrete is totally
dependent on the water- cement ratio.
.
2. NOMINAL MIX CONCRETE:
.
*When the concrete is produced by taking standard arbitrary proportions of concrete ingredients, it is known as nominal mix concrete. *This method is generally used when the quality control requirement for design mixes are difficult to execute. As we have explained for normal work, nominal mix concrete can be designed by taking cement, fine aggregate and coarse aggregate in
the ratio of 1 : n : 2n.
.
👇👇👇👇👇
Join for more updates via the link below;
t.me/COTMp

@etconp

Facebook:- https://www.facebook.com/etconp/
Components of building

➪ parapet wall- low or dwarf wall built along the edge of the roof, terrace, walkway, balcony
➪ roof slab
➪ brick masonry
➪ concrete floor
➪ plinth beam or grade beam
➪ lintel - a horizontal member, which is placed across the openings, left in the wall for the provision of doors, windows etc. ... The slab may be supported by walls or by reinforced concrete beams usually cast monolithically with the slab or by structural steel beams or by columns, or by the ground.

@etconp

Facebook:- https://www.facebook.com/etconp/
👍3
👉Tip For Today @COTMp
.
1.1 Classification of Construction Materials
Construction materials can be classified into:
I) Metallic and Non-metallic
a. Non-metallic
- Cementing materials
- Concrete
- Timber
- Stone
- Plastics
- Ceramics
b. Metallic
- Ferrous
• Wrought iron
• Cast iron
• Steel
- Non Ferrous
• Aluminium
• Copper
• Lead
• Zinc
II) Based on their physical Nature:
a) Solid
b) Liquid
c) Gaseous
III) Based on their mode of manufacture
a) Naturally occurring materials
b) Industrially produced materials
c) Materials produced at construction site
1.2 Properties of Materials
a) Physical properties
• Density and specific gravity
•Mechanical properties
• Thermal properties
• Acoustical properties
b) Chemical properties
• Corrosion Here only the mechanical properties are dealt with since they have a great practical significance in Civil Engineering.
1.2.1 Mechanical Properties When forces are applied to a solid body, two results are produced:
1) Internal resisting forces
2) Deformation .
The internal forces and deformations are called stresses and strains respectively.
Depending up on the arrangement and direction of the external forces, the stress produced may be:
a) Tensile stress
b) Compressive stress
c) Shearing stress
d) Bending stress
e) Torsional stress
f) Combinations of the above stresses
Deformation:
a) Elastic if it recovers when the external force is released
b) Plastic if it fails to recover when the external force is released If a material is capable to carry its own weight and any applied load, it is assumed to be strong material.
This way is that the strength of the material is determined. When a material is said to be strong it is its strength in tension or compression that is usually referred to, but it is often necessary to know its strength in shear and torsion as well.
1.3 Tests for Mechanical Properties Selection of material for a particular structural application depends on its mechanical properties.
There are standard mechanical tests to measure these properties. Mechanical tests are used to examine the performance of materials under the action of external force.
1.3.1 Classification of Mechanical Tests
I) II) With reference to the direction of the external
forces
a) Tension test
b) Compression test
c) Shear test
d) Bending test
e) Torsion test
With reference to the rate and duration of the load application
a) Static Tests: these are made with gradually
increasing load, such as ordinary tests in tension,
compression etc.
b) Dynamic test: these are made with suddenly
applied loads, as by falling weight
c) Wear tests: these are made to determine
resistance to abrasion and impact, as in the case of
paving materials
d) Longtime tests: there are made with loads
applied to the object under test for a long period of
time. They are used for materials such as concrete.
e) Fatigue test: these are made with fluctuating
stresses repeated a large number of times
III) With reference to the effect of the test on the
specimen
a) Destructive tests: Under these test methods, the
specimens are either crushed or ruptured and made useless at the end of the tests
b) Non-destructive tests: These are usually used to
test the strength of members of existing structures without affecting their performance.
.
➡Join for more updates via the link below;
t.me/COTMp
👆👆👆👆👆

Facebook:- https://www.facebook.com/etconp/

Library 📚:- @ETCONpDigitalLibrary_Bot
Removal of foundation

@etconp

Facebook:- https://www.facebook.com/etconp/
👉PROPERTIES OF HARDENED CONCRETE @COTMp
.
⏩The following are the properties of concrete in its hardened state, used by the designer during design process of reinforced concrete structure.
1. COMPRESSIVE STRENGTH
*The characteristics strength is defined as
the strength of concrete below which not
more than 5% of the test results are expected to fall. As per IS: 456 concrete
mix always designed for the target strength computed as,
Target strength: Characteristics strength + (1.65 x standard deviation) M20 is the minimum grade of concrete for use in RCC work.
2. TENSILE STRENGTH
*Flexural strength is one measure of the Tensile strength of concrete. In concrete structure one set of visible cracks occur under flexure to compute load factor against cracking .According to IS: 456 the tensile strength of concrete can be computed from the compressive strength using empirical relation given by:
Flexural strength:
f =0.7√fck N/mm
3. MODULUS ELASTICITY
*Modulus of elasticity of concrete which is
significantly influenced by the following
factors.
*Type of the aggregates used, Type of cement and
Mix proportions This property is required for the
computations of deflections of structural
concrete members which forms an important limit state in the design of
concrete members. In the absence of test data, the modulus of elasticity of concrete is normally related to the compressive
strength and is computed by the empirical
relationship recommended by IS: 456-2000
code and is expressed as,
E =5000√fck
*Where E is the short term static modulus of elasticity of concrete expressed in N/mm f is the characteristic compressive
strength of concrete expressed in N/mm .
4. SHRINKAGE OF CONCRETE
*The ingredients of concrete and environmental conditions like temperature and humidity influence the total shrinkage of concrete. Water content in concrete significantly affects the shrinkage. The IS: 456-2000 recommends the total shrinkage
strain as 0.0003 in the absence of test data. Drying shrinkage in plain concrete may result in surface cracks. Shrinkage of concrete also influences the deflections of reinforced concrete members.
5. CREEP OF CONCRETE
*The inelastic time dependent strain
developed in a concrete ember under sustained loading is referred to as creep of concrete. Creep of concrete is influenced
by following factors.
Cement content,
W/C ratio, Temperature and humidity, Size of structural element,
*Type of loading and period of loading. In the absence of reliable experimental data, the creep coefficient is expressed as the ratio of ultimate creep strain/elastic strain at various ages of loading as recommended by IS: 456-2000 are given
below.
*Age at Loading Creep Coefficient
7 days 2.2
28 days 1.6
1 year 1.1
*Creep of concrete significantly affects the deflections of reinforced concrete flexural
members. Higher creep coefficient results
in large deflections. The value of creep coefficient is useful in the computation of time dependent deflections in reinforced concrete members.
6. COEFFICIENT OF THERMAL EXPANSION
*The coefficient of thermal expansion of concrete, influenced mainly by the type of aggregate used in concrete is required for
the design of structures like chimneys, water tanks, silos etc.
.
👇👇👇👇👇
Join for more updates via the link below;
t.me/COTMp
👆👆👆👆👆
Facebook:- https://www.facebook.com/etconp/
👍1
👉HOW TO CHECK QUALITY OF CEMENT AT SITE @COTMp
~~~~~~~~~~~~
➡Cement is one of the most important materials
used in construction. The strength of a structure
depends upon several factors, cement quality is one of them. To achieve the desired strength of
concrete and to increase the longevity of structure
good quality cement should always be used.
So it is important to check the quality of cement
before using. In our previous article, we have
already discussed the different types of cement and their uses in construction. Today we will discuss how to check the quality of cement at site.
To check the quality of cement we need to pass
some easy tests which are described below.
1. DATE OF PACKING:
The strength of cement decreases with time. First
of all, check the manufacturing date in the bag before using. Generally, cement should be used before 90 days from the manufacturing date.
three months stored cement decreases its strength by 20-30 %, six months stored cement decreases its strength by 30-40% and 12 months stored cement decrease its strength by 40-50%
2. CEMENT COLOR:
The cement should be uniform in color. Good
quality cement should have gray color with greenish shade.
3. CHECK FOR LUMPS:
No lumps should be present in the cement. Lumps are formed due to absorption of moisture from the climate.
4. RUBBING TEST:
Cement should feel smooth while rubbing in
between fingers. If it gives a rough feeling that
means cement is mixed with sand.
5 TEMPERATURE TEST:
Simply insert your hand into the cement bag, it should give cool feeling if its quality is good.
Otherwise, you may feel warm because of hydration reaction.
6. FLOAT TEST:
Take some amount of cement and throw it in water.
The cement should float for sometimes before it sinks in the water.
7. SETTING TEST:
Make a thick cement paste with water and immerse it in water for 24 hours.
It should be set and should not develop cracks.
8. STRENGTH TEST:
Prepare a cement block of 25 mm x 25 mm and 200 mm in length.
Now submerge it in water for 7 days. Now place it on supports 15 cm apart and load it with 34 kg weight. Block made from good cement will not show any signs of failure.

Facebook:- https://www.facebook.com/etconp/

@etconp
👍2
Shattering work component

@etconp

https://www.facebook.com/etconp/
How to calculate cement , sand and brick 🧱 in one cubic meter (m³)

Join our telegram:- https://t.me/ETCONp

Facebook:- https://www.facebook.com/etconp/

@etconp
Is this acceptable? And what will this defect cause?

ተወባይነት አለው ? ምን ሊያስትል ይችላል ይሄ ስህተት ?

@etconp

Comment down below @cotmp discuss group

Telegram:- https://t.me/ETCONp

Facebook:- https://www.facebook.com/etconp/
Name the following elements
A,B,C,D,E
#steel
@etconp

Facebook:- https://www.facebook.com/etconp/
Ethio Construction Engineering
Name the following elements A,B,C,D,E #steel @etconp Facebook:- https://www.facebook.com/etconp/
Answer 👆🏾👆🏾👆🏾

A. Anchor Rods
B. Grout Pad
C. Steel column
D. Base Plate
E. Concrete Footing

@etconp

Facebook:- https://www.facebook.com/etconp/

የፌስቡክ ገፃችንን ተቀላቀሉ እናመሰግናለን 🙏
Retaining Wall
Name the following Elements
A,B,C,D,E,F

@etconp

Facebook:- https://www.facebook.com/etconp/
Ethio Construction Engineering
Retaining Wall Name the following Elements A,B,C,D,E,F @etconp Facebook:- https://www.facebook.com/etconp/
Answer 👆🏾👆🏾👆🏾

A. Base slab , footing
B. Key
C. Stem
D. Drainage
E. Construction joint
F. Back fill

@etconp

Facebook:- https://www.facebook.com/etconp/

የፌስቡክ ገፃችንን ተቀላቀሉ እናመሰግናለን 🙏
👉ዛሬ ደሞ ስለ የ cement ኣይነቶች እንማማር @COTMp
.
⏩There are various types of cement used in concrete construction. Each type of cement has its own properties, uses and advantages based on composition materials used during its manufacture.
⏩13 Types of Cement and their Uses👇
1. Ordinary Portland Cement (OPC)
2. Portland Pozzolana Cement (PPC)
3. Rapid Hardening Cement
4. Quick setting cement
5. Low Heat Cement
6. Sulphates resisting cement
7. Blast Furnace Slag Cement
8. High Alumina Cement
9. White Cement
10. Coloured cement
11. Air Entraining Cement
12. Expansive cement
13. Hydrographic cement
.
▶1. Ordinary Portland Cement (OPC)
Ordinary Portland cement is the most widely used type of cement which is
suitable for all general concrete construction.
It is most widely produced
and used type of cement around the world with annual global production of around 3.8 million cubic meters per year.
*This cement is suitable for all type of concrete construction.
▶2. Portland Pozzolana Cement (PPC)
*Portland pozzolana cement is prepared by
grinding pozzolanic clinker with Portland
cement. It is also produced by adding pozzolana with the addition of gypsum or
calcium sulfate or by intimately and uniformly blending portland cement and fine pozzolana.
*This cement has high resistance to various
chemical attacks on concrete compared
with ordinary portland cement and thus it
is widely used. It is used in marine structures, sewage works, sewage works
and for laying concrete under water such
as bridges, piers, dams and mass concrete
works etc.
▶3. Rapid Hardening Cement
*Rapid hardening cement attains high strength in early days it is used in
concrete where formworks are removed at an early stage and is similar to ordinary portland cement (OPC). This cement has
increased lime content and contains higher c3s content and finer grinding which gives greater strength development
than OPC at an early stage.
*The strength of rapid hardening cement at
the 3 days is similar to 7 days strength of
OPC with the same water-cement ratio.
Thus, advantage of this cement is that
formwork can be removed earlier which increases the rate of construction and
decreases cost of construction by saving
formwork cost.
*Rapid hardening cement is used in prefabricated concrete construction, road works, etc.
▶4. Quick setting cement
The difference between the quick setting cement and rapid hardening cement is
that quick setting cement sets earlier while rate of gain of strength is similar to Ordinary Portland Cement, while rapid
hardening cement gains strength quickly.
Form works in both cases can be removed
earlier.
*Quick setting cement is used where works is to be completed in very short period and for concreting in static or running water.
▶5. Low Heat Cement
*Low heat cement is prepared by maintaining the percentage of tricalcium Almunate below 6% by increasing the proportion of C2S. This makes the concrete to produce low heat of hydration and thus is used in mass concrete
*construction like gravity dams, as the low heat of hydration prevents the cracking of concrete due to heat.
*This cement has increased power against sulphates and is less reactive and initial
setting time is greater than OPC.
▶6. Sulphates Resisting Cement
*Sulfate resisting cement is used to reduce the risk of sulphate attack on concrete and thus is used in construction of foundations where soil has high sulphate content.
*This cement has reduced
contents of C3A and C4AF.
Sulfate resisting cement is used in construction exposed to severe sulphate
action by water and soil in places like canals linings, culverts, retaining walls, siphons etc. ...

@etconp

Facebook:- https://www.facebook.com/etconp/
👍1
Research እየሰራችሁ questionnaire ካላችሁ እዚ ቻናል ላይ እንዲለቀቅላችሁ ከፈለጋችሁ ለመተባበር ዝግጁ ነን።

We can share your ongoing research questionnaire here in this channel. We are here to collaborate

@etconp

Facebook:- https://www.facebook.com/etconp/
Parts of window 🪟

Name parts of the window

We will later post the answers

@etconp

Facebook:- https://www.facebook.com/etconp/

ብዙ የ research questionnaire ልካችሁልናል በኋላ የምናጋራ ይሆናል እዚ channel ላይ።
👍1
Ethio Construction Engineering
Parts of window 🪟 Name parts of the window We will later post the answers @etconp Facebook:- https://www.facebook.com/etconp/ ብዙ የ research questionnaire ልካችሁልናል በኋላ የምናጋራ ይሆናል እዚ channel ላይ።
👆🏾👆🏾👆🏾👆🏾Answer 👆🏾👆🏾

A. Top Rail
B. Head
C. Lifts
D. Grills
E. Middle Rails
F. Window sills
G. Glass panels
H. Frame
I. Jambs
J. Bottom rails

@etconp

Facebook:- https://www.facebook.com/etconp/


የፌስቡክ ገፃችንን ተቀላቀሉ እናመሰግናለን 🙏