Ethio Construction Engineering
Basic mechanics question if you remember What’s the difference between between I. Free vector II. Sliding vector III. Fixed vector @etconp PARTICIPATE ❕❗️ Our digital library:- https://t.me/ETCONpDigitalLibrary_Bot Facebook:- https://www.face…
Basic mechanics question if you remember
What’s the difference between between
I. Free vector 
Answer
➪ a vector which is neither a point nor a line, and something that can move freely around the space though it has a fixed magnitude and fixed direction. Unit vector means the direction where you divide the vector by its magnitude.
II. Sliding vector
Answer
➪ a vector which has specific line of action in a space but doesn’t specify its line of action
III. Fixed vector
Answer
➪ a vector which has specific line of action and point of application
@etconp
Facebook:- https://www.facebook.com/etconp/
Our digital library:- https://t.me/ETCONpDigitalLibrary_Bot
Telegram:- https://t.me/ETCONp
What’s the difference between between
I. Free vector 
Answer
➪ a vector which is neither a point nor a line, and something that can move freely around the space though it has a fixed magnitude and fixed direction. Unit vector means the direction where you divide the vector by its magnitude.
II. Sliding vector
Answer
➪ a vector which has specific line of action in a space but doesn’t specify its line of action
III. Fixed vector
Answer
➪ a vector which has specific line of action and point of application
@etconp
Facebook:- https://www.facebook.com/etconp/
Our digital library:- https://t.me/ETCONpDigitalLibrary_Bot
Telegram:- https://t.me/ETCONp
ውድ የ @etconp ቤተሰቦች የምትፈልጉት መፅሀፍ ወይም lecture note አለ 10 ሰው ወደ ቻናላችን ጋብዙ screen shot በ @ETCONp_Bot ላኩልን ከዚያም የምትፈልጉትን መፅሀፍ ወይም lecture note እንልካለን ነገር ግን assignment መስራት research መስራት ወንጀል ነው አትጠይቁን ከ ህግም በ ሞራልም አግባብ ያፈነገጠ ነው እና በዚህ ጉዳይ አንተባበርም። ነገር ግን research questionnaire እዚ ላይ ለቀን ልንተባበራችሁ ዝግጁ ነን በተጨማሪም discussion points መወያያ ነጥቦችንም እናበረታታለን ሁሌም ከጎናችሁ ነን።
እንደምታውቁት እንደ መንደርደሪያ እንዲሆን holistic project sample attach አርገንላችኋል በተጨማሪም research proposal and research too እንደ sample እንዲሆን hint ለመስጠት።
Dear @etconp members is there any lecture note or book you are looking for regarding construction, architecture and engineering we are here for you. Invite 10 friends of yours and send us the screenshot via @ETCONp_Bot we will send you book and lecture note you’re looking for
Thank you in advance 🙏
እናመሰግናለን 🙏
@etconp
Facebook:-https://www.facebook.com/etconp/
እንደምታውቁት እንደ መንደርደሪያ እንዲሆን holistic project sample attach አርገንላችኋል በተጨማሪም research proposal and research too እንደ sample እንዲሆን hint ለመስጠት።
Dear @etconp members is there any lecture note or book you are looking for regarding construction, architecture and engineering we are here for you. Invite 10 friends of yours and send us the screenshot via @ETCONp_Bot we will send you book and lecture note you’re looking for
Thank you in advance 🙏
እናመሰግናለን 🙏
@etconp
Facebook:-https://www.facebook.com/etconp/
👍1
👉PROPERTIES OF AGGREGATES FOR CONCRETE @COTMp
.
▶Approximately 75% of the volume of concrete is occupied by aggregates,so
quality of aggregates plays an important role in determining properties of concrete.
*Aggregates come in various shapes, sizes, and materials ranging from fine particles of sand to large, coarse rocks. *Natural aggregates are formed by process of weathering and abrasion or by artificially crushing large parent mass.
Because cement is the most expensive ingredient in making concrete, it is
desirable to minimize the amount of cement used. 70 to 80% of the volume of
concrete is aggregate in order to keep the cost of the concrete low.
*Soft, porous aggregates can result in weak concrete with low wear resistance, while using hard aggregates can make strong concrete with a high resistance to abrasion.
*Aggregates are of two basic types: Coarse: crushed rock, gravel or screenings.
*Fine: fine and coarse sands and crusher fines Aggregates should be clean, hard, and strong.
*The aggregate is usually washed to remove any dust, silt, clay, organic matter, or other impurities that would interfere with
the bonding reaction with the cement paste.
*The choice of aggregate is determined by the proposed use of the concrete.
*Normally sand, gravel, and crushed stone are used as aggregates to make concrete.
*The aggregate should be well-graded to improve packing efficiency and minimize the amount of cement paste needed. Also, this makes the concrete more workable.
Some of the important properties of aggregates are discussed below.
▶PROPERTIES OF AGGREGATES
1. SOUNDNESS:Rocks that undergo volume changes due to wetting and drying are rare. However, aggregate is susceptible to volume change during freezing and thawing cycles.
*Freezing can cause internal stresses to build up as water inside the aggregate freezes and expands.
2. WEAR RESISTANCE
A good aggregate will be hard, dense, strong, and
free of porous material. The abrasion resistance of
aggregate can be tested by the Los Angeles abrasion test; however, this test does not match
well with concrete wear in the field.
3. ALKALI-AGGREGATE
REACTION: An expansive reaction between some reactive forms of silica with the aggregate and alkalis in the cement paste.
*The result is overall cracking in the
structure, manifesting itself in map or pattern cracking at the surface. *This reaction can be
controlled most easily by using low-alkali cements.
However, due to changes in manufacturing, low-
alkali cements may not be feasible.
*A better approach is to avoid aggregate with the potential or proven record of reactivity. A low w/c ratio is very impermeable and will slow down the reaction but not stop it. No adverse reactions will occur without external water.
4. OTHER ALKALI-SILICA
REACTIONS: Sand-gravels found in river systems of Kansas and Nebraska are highly reactive and cause map cracking. *Replacement of 30% of the aggregate with
crushed limestone is effective in reducing the damage. Basically, it results in the separation of flat clay minerals causing very slow expansion.
5. ALKALI-CARBONATE REACTIONS: An expansive reaction involving clayey
carbonate rock. Reaction can be controlled by using low-alkali cements or blending aggregate with other less reactive material.
*ASTM has set standards for deleterious substances in aggregates, which depend on application.
6. IMPURITIES: Solid materials – particles passing a 200- mesh sieve.
*These fine particles may increase water requirements and interfere with surface bonding
between cement and coarse aggregates.
Soluble substances –organic matter may interfere chemically with alkaline cement pastes affecting setting time. *Aggregates obtained from the sea should be thoroughly cleaned
to avoid problems from salt contamination.
7. UNSOUND PARTICLES
Soft particles such as clay lumps, wood, and coal
will cause pitting and scaling at the surface.
Organic compounds can be released which interfere
with setting and hardening. Weak material of low density which have low wear resistance should also be avoided.
https://telegram.me/COTMp
.
▶Approximately 75% of the volume of concrete is occupied by aggregates,so
quality of aggregates plays an important role in determining properties of concrete.
*Aggregates come in various shapes, sizes, and materials ranging from fine particles of sand to large, coarse rocks. *Natural aggregates are formed by process of weathering and abrasion or by artificially crushing large parent mass.
Because cement is the most expensive ingredient in making concrete, it is
desirable to minimize the amount of cement used. 70 to 80% of the volume of
concrete is aggregate in order to keep the cost of the concrete low.
*Soft, porous aggregates can result in weak concrete with low wear resistance, while using hard aggregates can make strong concrete with a high resistance to abrasion.
*Aggregates are of two basic types: Coarse: crushed rock, gravel or screenings.
*Fine: fine and coarse sands and crusher fines Aggregates should be clean, hard, and strong.
*The aggregate is usually washed to remove any dust, silt, clay, organic matter, or other impurities that would interfere with
the bonding reaction with the cement paste.
*The choice of aggregate is determined by the proposed use of the concrete.
*Normally sand, gravel, and crushed stone are used as aggregates to make concrete.
*The aggregate should be well-graded to improve packing efficiency and minimize the amount of cement paste needed. Also, this makes the concrete more workable.
Some of the important properties of aggregates are discussed below.
▶PROPERTIES OF AGGREGATES
1. SOUNDNESS:Rocks that undergo volume changes due to wetting and drying are rare. However, aggregate is susceptible to volume change during freezing and thawing cycles.
*Freezing can cause internal stresses to build up as water inside the aggregate freezes and expands.
2. WEAR RESISTANCE
A good aggregate will be hard, dense, strong, and
free of porous material. The abrasion resistance of
aggregate can be tested by the Los Angeles abrasion test; however, this test does not match
well with concrete wear in the field.
3. ALKALI-AGGREGATE
REACTION: An expansive reaction between some reactive forms of silica with the aggregate and alkalis in the cement paste.
*The result is overall cracking in the
structure, manifesting itself in map or pattern cracking at the surface. *This reaction can be
controlled most easily by using low-alkali cements.
However, due to changes in manufacturing, low-
alkali cements may not be feasible.
*A better approach is to avoid aggregate with the potential or proven record of reactivity. A low w/c ratio is very impermeable and will slow down the reaction but not stop it. No adverse reactions will occur without external water.
4. OTHER ALKALI-SILICA
REACTIONS: Sand-gravels found in river systems of Kansas and Nebraska are highly reactive and cause map cracking. *Replacement of 30% of the aggregate with
crushed limestone is effective in reducing the damage. Basically, it results in the separation of flat clay minerals causing very slow expansion.
5. ALKALI-CARBONATE REACTIONS: An expansive reaction involving clayey
carbonate rock. Reaction can be controlled by using low-alkali cements or blending aggregate with other less reactive material.
*ASTM has set standards for deleterious substances in aggregates, which depend on application.
6. IMPURITIES: Solid materials – particles passing a 200- mesh sieve.
*These fine particles may increase water requirements and interfere with surface bonding
between cement and coarse aggregates.
Soluble substances –organic matter may interfere chemically with alkaline cement pastes affecting setting time. *Aggregates obtained from the sea should be thoroughly cleaned
to avoid problems from salt contamination.
7. UNSOUND PARTICLES
Soft particles such as clay lumps, wood, and coal
will cause pitting and scaling at the surface.
Organic compounds can be released which interfere
with setting and hardening. Weak material of low density which have low wear resistance should also be avoided.
https://telegram.me/COTMp
Telegram
ETCONp Discussion
✌️ይህ የ @etconp መወያያ ግሩፓቹ ነው።
✋This is discussion group of @ETCONpWORK
.
🔖ማሳሰብያ ...
.
⚡️ግሩፑ ላይ ማነኛውም ከ ኮንስትራክሽን ጉዳዮች ውጪ መለጠፍ በፍፁም አይፈቀድም!
.
📩ለማነኛውም ሀሳብ እና አስተያየት @ETCONpBOT ፃፉልን። እናመሰግናለን🙏
✋This is discussion group of @ETCONpWORK
.
🔖ማሳሰብያ ...
.
⚡️ግሩፑ ላይ ማነኛውም ከ ኮንስትራክሽን ጉዳዮች ውጪ መለጠፍ በፍፁም አይፈቀድም!
.
📩ለማነኛውም ሀሳብ እና አስተያየት @ETCONpBOT ፃፉልን። እናመሰግናለን🙏
Roof drainage system
@etconp
Our digital library:- https://t.me/ETCONpDigitalLibrary_Bot
Facebook:- https://www.facebook.com/etconp/
@etconp
Our digital library:- https://t.me/ETCONpDigitalLibrary_Bot
Facebook:- https://www.facebook.com/etconp/
Steel structure
The weakest section of diamond riveting , is the section which passes through
The weakest section of diamond riveting , is the section which passes through
Anonymous Quiz
6%
Second row
55%
One rivet hole of the end row
21%
Central row
19%
First row
This are welding joints
Name them A-L
@etconp
If you want quick answers join us on Facebook
Our digital library:- https://t.me/ETCONpDigitalLibrary_Bot
Facebook:- https://www.facebook.com/etconp/
Name them A-L
@etconp
If you want quick answers join us on Facebook
Our digital library:- https://t.me/ETCONpDigitalLibrary_Bot
Facebook:- https://www.facebook.com/etconp/
Ethio Construction Engineering
Every Enginner should answer this What if you want to apply in some construction company with good reputation in Addis Ababa and they gave this questions how are you gonna answer 🇵 🇦 🇷 🇹 🇮 🇨 🇮 🇵 🇦 🇹 🇪 ❕ 1. What’s the height of single store building ?…
Part II
14. What’s deflection ?
15. What’s deformation ?
16. What’s the formula of tensile
strength of concrete?
17. What’s the minimum thickness of
slab ?
@etconp
Facebook:- https://www.facebook.com/etconp/
Telegram:- @etconp
14. What’s deflection ?
15. What’s deformation ?
16. What’s the formula of tensile
strength of concrete?
17. What’s the minimum thickness of
slab ?
@etconp
Facebook:- https://www.facebook.com/etconp/
Telegram:- @etconp
🕊1
Brick quantity : bricks calculation for wall in cumbic meter
Wall length (L) = 10 meters
Wall height (H) = 5 meters
Wall thickness (T) = 0.2 meters
Volume of wall = L * H * T
= 10 x 5 x 0.2
= 10 m³
✍︎︎ Let’s say mortar thickness 10 mm which is 0.1 m
➪ As you can see in this picture the dimension of single brick is 90 mm x 190 mm x 90mm
➪ volume of brick = 90 mm x 190 mm x 90 mm
( without mortar)
➪ volume of brick without mortal
= 0.09 x 0.09 x 0.19 = 0.001539 m³
➪ Volume of brick with brick [ +10mm each sides]
= 0.20 x 0.1 x 0.1 ( with mortar )
= 0.002m³
# of brick 🧱 in the wall = 10 / 0.002 = 5000 bricks
✈︎ Let’s add 5% of wastage of bricks
☞︎ 5000 x 5/100 = 250 bricks 🧱
Total number of bricks including wastage
= 5000 + 250 = 5250 bricks 🧱
Facebook:- https://www.facebook.com/etconp/
Our digital library:- https://t.me/ETCONpDigitalLibrary_Bot
Wall length (L) = 10 meters
Wall height (H) = 5 meters
Wall thickness (T) = 0.2 meters
Volume of wall = L * H * T
= 10 x 5 x 0.2
= 10 m³
✍︎︎ Let’s say mortar thickness 10 mm which is 0.1 m
➪ As you can see in this picture the dimension of single brick is 90 mm x 190 mm x 90mm
➪ volume of brick = 90 mm x 190 mm x 90 mm
( without mortar)
➪ volume of brick without mortal
= 0.09 x 0.09 x 0.19 = 0.001539 m³
➪ Volume of brick with brick [ +10mm each sides]
= 0.20 x 0.1 x 0.1 ( with mortar )
= 0.002m³
# of brick 🧱 in the wall = 10 / 0.002 = 5000 bricks
✈︎ Let’s add 5% of wastage of bricks
☞︎ 5000 x 5/100 = 250 bricks 🧱
Total number of bricks including wastage
= 5000 + 250 = 5250 bricks 🧱
Facebook:- https://www.facebook.com/etconp/
Our digital library:- https://t.me/ETCONpDigitalLibrary_Bot
👍1
Just in : we posted Collapsing of tunnel in Iran 🇮🇷 on our Facebook page
በ Facebook ገፃችን በ ኢራን የተደረመሰውን tunnel post አድርገናል
Link :- https://fb.watch/8fXyv24lt6/
#tunnel #collapse #iran
ወደ በኋላ ያልተመለሱ ጥያቄዎችን መልስ ይዘን እንመጣለን
☞︎ ቪዲዩዎችን በfacebook ገፃቻን እንለቃለን ቴሌግራም ቪዲዮ ለማየት የግድ download መደረግ ስላለበት space እንዳይወስድባችሁ Facebook የተሻለ ነው።
☞︎ from now on we will post videos on our Facebook page because telegram takes space to watch uploaded videos whereas Facebook doesn’t take your space to watch video .... it’s kind of difficult to clean up your catch size on telegram so Facebook is better regarding this
Thank you 🙏
እናመሰግናለን 🙏
@etconp @cotmp
Facebook:- https://www.facebook.com/etconp/
Our digital library:- https://t.me/ETCONpDigitalLibrary_Bot
በ Facebook ገፃችን በ ኢራን የተደረመሰውን tunnel post አድርገናል
Link :- https://fb.watch/8fXyv24lt6/
#tunnel #collapse #iran
ወደ በኋላ ያልተመለሱ ጥያቄዎችን መልስ ይዘን እንመጣለን
☞︎ ቪዲዩዎችን በfacebook ገፃቻን እንለቃለን ቴሌግራም ቪዲዮ ለማየት የግድ download መደረግ ስላለበት space እንዳይወስድባችሁ Facebook የተሻለ ነው።
☞︎ from now on we will post videos on our Facebook page because telegram takes space to watch uploaded videos whereas Facebook doesn’t take your space to watch video .... it’s kind of difficult to clean up your catch size on telegram so Facebook is better regarding this
Thank you 🙏
እናመሰግናለን 🙏
@etconp @cotmp
Facebook:- https://www.facebook.com/etconp/
Our digital library:- https://t.me/ETCONpDigitalLibrary_Bot
Ethio Construction Engineering
Part II 14. What’s deflection ? 15. What’s deformation ? 16. What’s the formula of tensile strength of concrete? 17. What’s the minimum thickness of slab ? @etconp Facebook:- https://www.facebook.com/etconp/ Telegram:- @etconp
Answers
Part II
14. What’s deflection ?
Answer
➪ the movement of a beam from its original position . It happens due to the forces and loads being applied to the body. Deflection also referred to as displacement, which can occur from externally applied loads or from the weight of the body structure itself. The stress which causes deflection is called Flexural stress
15. What’s deformation ?
Answer
➪ is a permanent warping, bending, twisting and springiness in structural components
16. What’s the formula of tensile strength of
concrete?
Answer
➪ 0.7√𝑓𝑐𝑘
where ; 𝑓𝑐𝑘 is characteristics of compressive strength of
17. What’s the minimum thickness of
slab ?
Answer
➪ 12 mm (0.012meters)
@etconp
Our digital library :- https://t.me/ETCONpDigitalLibrary_Bot
Facebook:- https://www.facebook.com/etconp/
Telegram:- @etconp
Part II
14. What’s deflection ?
Answer
➪ the movement of a beam from its original position . It happens due to the forces and loads being applied to the body. Deflection also referred to as displacement, which can occur from externally applied loads or from the weight of the body structure itself. The stress which causes deflection is called Flexural stress
15. What’s deformation ?
Answer
➪ is a permanent warping, bending, twisting and springiness in structural components
16. What’s the formula of tensile strength of
concrete?
Answer
➪ 0.7√𝑓𝑐𝑘
where ; 𝑓𝑐𝑘 is characteristics of compressive strength of
17. What’s the minimum thickness of
slab ?
Answer
➪ 12 mm (0.012meters)
@etconp
Our digital library :- https://t.me/ETCONpDigitalLibrary_Bot
Facebook:- https://www.facebook.com/etconp/
Telegram:- @etconp
Telegram
ETCONp Digital Library
ማሻሸያ እና አስተያየት ፃፋልን @Philemona7
👉ይህ የ ኢትየጵያዊያን የኮንስትራክሽን ስራ ባለሞያዎች ቻናል ዲጅታል ላይብረሪ ቦት ነው፡!
👉ይህ የ ኢትየጵያዊያን የኮንስትራክሽን ስራ ባለሞያዎች ቻናል ዲጅታል ላይብረሪ ቦት ነው፡!
👍1
What does plinth beam mean ?
@etconp
Facebook:- https://www.facebook.com/etconp/
Our digital library:- https://t.me/ETCONpDigitalLibrary_Bot
@etconp
Facebook:- https://www.facebook.com/etconp/
Our digital library:- https://t.me/ETCONpDigitalLibrary_Bot
Ethio Construction Engineering
What does plinth beam mean ? @etconp Facebook:- https://www.facebook.com/etconp/ Our digital library:- https://t.me/ETCONpDigitalLibrary_Bot
Answer
Plinth beam or grade beam is the beam which lies on the ground which helps us to restrain the foundation column
Facebook:- https://www.facebook.com/etconp/
Our digital library:- https://t.me/ETCONpDigitalLibrary_Bot
Plinth beam or grade beam is the beam which lies on the ground which helps us to restrain the foundation column
Facebook:- https://www.facebook.com/etconp/
Our digital library:- https://t.me/ETCONpDigitalLibrary_Bot
What’s the difference between
True slump , zero slump , collapsed slump and shear slump
𝑃𝑎𝑟𝑡𝑖𝑐𝑖𝑝𝑎𝑡𝑒 @cotmp @etconp
we will post te answer soon
Facebook:- https://www.facebook.com/etconp/
Our digital library:- https://t.me/ETCONpDigitalLibrary_Bot
True slump , zero slump , collapsed slump and shear slump
𝑃𝑎𝑟𝑡𝑖𝑐𝑖𝑝𝑎𝑡𝑒 @cotmp @etconp
we will post te answer soon
Facebook:- https://www.facebook.com/etconp/
Our digital library:- https://t.me/ETCONpDigitalLibrary_Bot
Ethio Construction Engineering
What’s the difference between True slump , zero slump , collapsed slump and shear slump 𝑃𝑎𝑟𝑡𝑖𝑐𝑖𝑝𝑎𝑡𝑒 @cotmp @etconp we will post te answer soon Facebook:- https://www.facebook.com/etconp/ Our digital library:- https://t.me/ETCONpDigitalLibrary_Bot
Answer
True slump :- the concrete mass after the test when slump evenly all around without disintegration
Shear slump :- when one half of the concrete mass slide down down the other. This type of slump is obtained in a lean concrete mix.
Where do we use lean concrete mix @etconp @cotmp answer on our discuss group
Collapse slump :- when the sample is collapsed due to adding excessive water.
Zero slump:- for very stiff or dry mixes it doesn’t show any changes of slump after removing the slump cone
I salute you @MenbTW 🙌
Thank you 🙏
Facebook:- https://www.facebook.com/etconp/
Our digital library:- https://t.me/ETCONpDigitalLibrary_Bot
True slump :- the concrete mass after the test when slump evenly all around without disintegration
Shear slump :- when one half of the concrete mass slide down down the other. This type of slump is obtained in a lean concrete mix.
Where do we use lean concrete mix @etconp @cotmp answer on our discuss group
Collapse slump :- when the sample is collapsed due to adding excessive water.
Zero slump:- for very stiff or dry mixes it doesn’t show any changes of slump after removing the slump cone
I salute you @MenbTW 🙌
Thank you 🙏
Facebook:- https://www.facebook.com/etconp/
Our digital library:- https://t.me/ETCONpDigitalLibrary_Bot
Unit of measurement
Facebook:- https://www.facebook.com/etconp/
Our digital library:- https://t.me/ETCONpDigitalLibrary_Bot
Facebook:- https://www.facebook.com/etconp/
Our digital library:- https://t.me/ETCONpDigitalLibrary_Bot
Ever Wondered Why Your Measuring Tape Has Black Diamonds On It ?
Participate on @cotmp we will post the answer
@etconp
Facebook:- https://www.facebook.com/etconp/
Participate on @cotmp we will post the answer
@etconp
Facebook:- https://www.facebook.com/etconp/
👍1
Ratio of shear stress to shear strain is ____?
1. Modulus of elasticity
2. Modulus of rigidity
3. Modulus of bulk
4. All of the above
#strength_of_material
@etconp
Facebook:- https://www.facebook.com/etconp/
1. Modulus of elasticity
2. Modulus of rigidity
3. Modulus of bulk
4. All of the above
#strength_of_material
@etconp
Facebook:- https://www.facebook.com/etconp/
💔1
Ethio Construction Engineering
Ever Wondered Why Your Measuring Tape Has Black Diamonds On It ? Participate on @cotmp we will post the answer @etconp Facebook:- https://www.facebook.com/etconp/
Ever Wondered Why Your Measuring Tape Has Black Diamonds On It ?
Answer
The black diamonds ♦️ on the tap represents the spacing in (I-beam timber).
These diamonds appear at the 19.2-inch mark and allow the construction workers to make five trusses in an eight-foot space. Truss layouts or items are usually eight feet in length, and when you divide 8 feet (38.4, 57.6, 76.8 and 96 inches) into five, you get 19.2.
It is vital for the construction workers as most of the American construction materials come in lengths of eight feet.
Note that :- USA 🇺🇸 uses FPS (foot pound second) SYSTEM
ሜትር ላይ ያሉ አምስቱ ጥቁር የ diamond ቅርፅ ያላቸው የሚወክሉት ምንድንነው?
⁃ ለ አናፂዎች "truss" ሲሰሩ ስራ ለማቅለል በተደጋጋሚ እንዳያሰምሩ የተደረገላቸው ምልክት ነው። በየ 19.2 inch ( 48.7cm) ርቀት ማለትም (38.4, 57.6, 76.8 and 96 inches) 5 ቦታ የተደረገ ነው። floor truss spacing በ “ጣውላ” / timber ለሚሰሩ ቤቶች 19.2 inch ነው። ያው ባደጉ የ አለም ሀገራት አብዛኛ ነገር በ standardize ተደርጓል።
⁃ እንደሚታወቀው አሜሪካ 🇺🇸 FPS (foot pound second) system ተጠቃሚ ሀገር ነች። እንደኛ SI unit አይደለም።
Thank you @MenbTW I salute you sir 🙏
@etconp
Facebook:- https://www.facebook.com/etconp/
Our digital library:- https://t.me/ETCONpDigitalLibrary_Bot
Answer
The black diamonds ♦️ on the tap represents the spacing in (I-beam timber).
These diamonds appear at the 19.2-inch mark and allow the construction workers to make five trusses in an eight-foot space. Truss layouts or items are usually eight feet in length, and when you divide 8 feet (38.4, 57.6, 76.8 and 96 inches) into five, you get 19.2.
It is vital for the construction workers as most of the American construction materials come in lengths of eight feet.
Note that :- USA 🇺🇸 uses FPS (foot pound second) SYSTEM
ሜትር ላይ ያሉ አምስቱ ጥቁር የ diamond ቅርፅ ያላቸው የሚወክሉት ምንድንነው?
⁃ ለ አናፂዎች "truss" ሲሰሩ ስራ ለማቅለል በተደጋጋሚ እንዳያሰምሩ የተደረገላቸው ምልክት ነው። በየ 19.2 inch ( 48.7cm) ርቀት ማለትም (38.4, 57.6, 76.8 and 96 inches) 5 ቦታ የተደረገ ነው። floor truss spacing በ “ጣውላ” / timber ለሚሰሩ ቤቶች 19.2 inch ነው። ያው ባደጉ የ አለም ሀገራት አብዛኛ ነገር በ standardize ተደርጓል።
⁃ እንደሚታወቀው አሜሪካ 🇺🇸 FPS (foot pound second) system ተጠቃሚ ሀገር ነች። እንደኛ SI unit አይደለም።
Thank you @MenbTW I salute you sir 🙏
@etconp
Facebook:- https://www.facebook.com/etconp/
Our digital library:- https://t.me/ETCONpDigitalLibrary_Bot