Ethio Construction Engineering
#scheduling What’s the difference between PERT ( program Evaluation and Review Technique) and CPM ( critical path method ) ? @etconp Facebook:- https://www.facebook.com/etconp/ Our digital library bot:- https://t.me/ETCONpDigitalLibrary_Bot Telegram:…
Answer
PERT
- it was developed in 1958
- it’s full form project evacuation and review technique
- it’s event oriented technique
- PERT manages unpredictable activities
- it focuses on time control
- it’s a three time estimate
- it’s a probabilistic model
CPM
- it’s full form CRITICAL PATH METHOD
- it’s activity oriented technique
- CPM manages predictable activities
- it was developed 1957
- it’s single time estimate
- it’s deterministic model
What’s the difference between probabilistic and deterministic mean ? if you remember scheduling .... discussion group @cotmp
@etconp
Facebook:- https://www.facebook.com/etconp/
PERT
- it was developed in 1958
- it’s full form project evacuation and review technique
- it’s event oriented technique
- PERT manages unpredictable activities
- it focuses on time control
- it’s a three time estimate
- it’s a probabilistic model
CPM
- it’s full form CRITICAL PATH METHOD
- it’s activity oriented technique
- CPM manages predictable activities
- it was developed 1957
- it’s single time estimate
- it’s deterministic model
What’s the difference between probabilistic and deterministic mean ? if you remember scheduling .... discussion group @cotmp
@etconp
Facebook:- https://www.facebook.com/etconp/
👍1
A building can be divided into how many components?
1️⃣. 3
2️⃣. 2
3️⃣. 6
4️⃣. 8
@etconp
Facebook:- https://www.facebook.com/etconp/
1️⃣. 3
2️⃣. 2
3️⃣. 6
4️⃣. 8
@etconp
Facebook:- https://www.facebook.com/etconp/
Ethio Construction Engineering via @like
A building can be divided into how many components? 1️⃣. 3 2️⃣. 2 3️⃣. 6 4️⃣. 8 @etconp Facebook:- https://www.facebook.com/etconp/
The answer is 2
That is substructure and superstructure
Substructure - basement , SUB FLOOR
foundation etc....beneath
the NGL
Superstructure- above NGL
@etconp
Facebook:- https://www.facebook.com/etconp/
Telegram:- https://t.me/ETCONp
That is substructure and superstructure
Substructure - basement , SUB FLOOR
foundation etc....beneath
the NGL
Superstructure- above NGL
@etconp
Facebook:- https://www.facebook.com/etconp/
Telegram:- https://t.me/ETCONp
The surface of highway is called
Anonymous Quiz
79%
Wearing courses
6%
Sub base
7%
Sub grade
7%
Base course
Float test bitumen is performed to determine
Anonymous Quiz
10%
Hardness
23%
Softening point
13%
Flash and fore point
33%
Consistency
22%
All
Ethio Construction Engineering
Curing days required for Super sulphate cement ? Ordinary Portland cement (OPC) ? Minerals and admixture added cement ? @etconp Facebook:- https://www.facebook.com/etconp/
Answer
For super sulphate cent - 7 days
For OPC (ordinary Portland ember) - 10 days
Mineral and admixture cement - 14 days
@etconp
For super sulphate cent - 7 days
For OPC (ordinary Portland ember) - 10 days
Mineral and admixture cement - 14 days
@etconp
👍1
How to find the slop of stair ?
At least 10 members should participate to get the answer
@etconp
Facebook:- https://www.facebook.com/etconp/
At least 10 members should participate to get the answer
@etconp
Facebook:- https://www.facebook.com/etconp/
👍1
Ethio Construction Engineering
How to find the slop of stair ? At least 10 members should participate to get the answer @etconp Facebook:- https://www.facebook.com/etconp/
Answer
➪ Tan θ = opposition / adjacent
* The opposition is the stringer height, and the adjacent is the total run *
Let’s list down the standards which are suitable for ergonomics
- riser = 15cm
- thread = 30cm
✔︎ Tan^-1 ( 15/30) = > tan-1 (0.5)
➪ θ= 26.567 ⁰
From the definition slop means rise/run
In our case riser/tread
@etconp
Facebook:- https://www.facebook.com/etconp/
➪ Tan θ = opposition / adjacent
* The opposition is the stringer height, and the adjacent is the total run *
Let’s list down the standards which are suitable for ergonomics
- riser = 15cm
- thread = 30cm
✔︎ Tan^-1 ( 15/30) = > tan-1 (0.5)
➪ θ= 26.567 ⁰
From the definition slop means rise/run
In our case riser/tread
@etconp
Facebook:- https://www.facebook.com/etconp/
Answer
θ = tan-1 (riser/ tread)
θ= tan-1(150mm/200mm)
θ= tan-1( 0.75)
θ= 36.9°
@etconp
Telegram:- https://t.me/ETCONp
Facebook:- https://www.facebook.com/etconp/
θ = tan-1 (riser/ tread)
θ= tan-1(150mm/200mm)
θ= tan-1( 0.75)
θ= 36.9°
@etconp
Telegram:- https://t.me/ETCONp
Facebook:- https://www.facebook.com/etconp/
Telegram
Ethio Construction Engineering
🔨 World Construction Engineering
Latest updates, tips, and tutorials on building, civil engineering, and construction in World.
Learn, build, and grow with us!
📨 @Philemona7 Or @ETCONpBOT
For Ad:- https://telega.io/c/etconp
Latest updates, tips, and tutorials on building, civil engineering, and construction in World.
Learn, build, and grow with us!
📨 @Philemona7 Or @ETCONpBOT
For Ad:- https://telega.io/c/etconp
What’s the name of this wall which is bent at some angel horizontally
1️⃣. Wing wall
2️⃣. Bridge wall
3️⃣. Masonry wall
4️⃣. Bent wall
@etconp
Facebook:- https://www.facebook.com/etconp/
1️⃣. Wing wall
2️⃣. Bridge wall
3️⃣. Masonry wall
4️⃣. Bent wall
@etconp
Facebook:- https://www.facebook.com/etconp/
1️⃣. Backhoe
2️⃣. Power shovel
3️⃣. Dragline
4️⃣. Crawler
@etconp
Facebook:- https://www.facebook.com/etconp/
2️⃣. Power shovel
3️⃣. Dragline
4️⃣. Crawler
@etconp
Facebook:- https://www.facebook.com/etconp/
For architects
In 3D printing an overhanging is apart of a model that is
In 3D printing an overhanging is apart of a model that is
Anonymous Quiz
12%
Supported underneath
44%
Partially/ fully unsupported underneath
19%
Vertical
25%
Floating