๐ แจ แณแชแญ แแ
แฐแญ แ Building Codes แแญแซ @COTMp
.
Building Codes - แจแแแแก แ แแแแฝ แแแแต แจแแแฃแธแแ
แฅแตแณแแณแญแถแฝ แจแซแ แจแ แแฝ แตแฅแตแฅ แแแกแก แ แแแแฝ แจแแแฃแณ
แแแตแ แแแแแต Building Code แแจแฐแ แ แแฃแธแแกแก
แจแฅแตแณแแณแญแถแน แ แตแแแแแตแ - แดแแฒ แค แคแ แฅแ แ แ แแ
แจแ แแแแ แฐแ แแแต ( Structural , Mechanical , Sanitary , Fire resistance. Earth quake, Flood , Water Supply, Light, Ventilation, แแแฐ ) แแแจแแแฅ แแ โฆโฆ. แฃแแแฝแ แแญ EBCS,Eurocode , IS, BS, แแแฐ แจแแแแธแ แจแ แแป แฎแถแฝ แฃแแกแก แจแ แฐแ EBCS(Ethioian building code of standards) แญแฃแแแข
.
.
แจแแญ แจแแตแแแจแฑแต แ แแ แ แแแจ แฉแฒแซ - แแ แแแ
แจแฅแแจแต แฐแแแ แถ แจแแ แจ แจแ แ แ แแ แฒแแ Fire resistance
standard แฃแแแแแฑ แจแ แซแฃแขแ แฃแแตแแฃแแต แ แแญแฐแแณแแกแก
.
Building Codes - แจแแแแก แ แแแแฝ แแแแต แจแแแฃแธแแ
แฅแตแณแแณแญแถแฝ แจแซแ แจแ แแฝ แตแฅแตแฅ แแแกแก แ แแแแฝ แจแแแฃแณ
แแแตแ แแแแแต Building Code แแจแฐแ แ แแฃแธแแกแก
แจแฅแตแณแแณแญแถแน แ แตแแแแแตแ - แดแแฒ แค แคแ แฅแ แ แ แแ
แจแ แแแแ แฐแ แแแต ( Structural , Mechanical , Sanitary , Fire resistance. Earth quake, Flood , Water Supply, Light, Ventilation, แแแฐ ) แแแจแแแฅ แแ โฆโฆ. แฃแแแฝแ แแญ EBCS,Eurocode , IS, BS, แแแฐ แจแแแแธแ แจแ แแป แฎแถแฝ แฃแแกแก แจแ แฐแ EBCS(Ethioian building code of standards) แญแฃแแแข
.
.
แจแแญ แจแแตแแแจแฑแต แ แแ แ แแแจ แฉแฒแซ - แแ แแแ
แจแฅแแจแต แฐแแแ แถ แจแแ แจ แจแ แ แ แแ แฒแแ Fire resistance
standard แฃแแแแแฑ แจแ แซแฃแขแ แฃแแตแแฃแแต แ แแญแฐแแณแแกแก
๐2
๐ แฃแ
แญแณแญ๐
แธแ แแแต แฐแแแ! @COTMp
แธแ แแแต แฐแแแ! @COTMp
According to ASTM standard types of portland cement are
1. Type 1 or normal portland cement
# general purpose cement
# used where there would be no severe climate change
# used where there is no severe exposure to sulphate attack from water or soil
2. Type 2 or moderate portland cement
# used in climate of moderate sulphate attack
# moderate heat of hydration
3. Type 3 or high early strength pc
# used where high early strength is desired,usually less than one weak
# when a structure must be put into service as quickly as possible
# less C2S and more C3S
4. Type 4 or low heat of hydration pc
# develops strength at a slower rate than does type 1
# intended for mass structures such as large gravity dams
5. Type 5 or sulfate resisting pc
# when high sulfate resistance is desired
# when concrete is to be exposed to severe sulfate action by soil or water
# contains less C3A
For more topics join @COTMp
1. Type 1 or normal portland cement
# general purpose cement
# used where there would be no severe climate change
# used where there is no severe exposure to sulphate attack from water or soil
2. Type 2 or moderate portland cement
# used in climate of moderate sulphate attack
# moderate heat of hydration
3. Type 3 or high early strength pc
# used where high early strength is desired,usually less than one weak
# when a structure must be put into service as quickly as possible
# less C2S and more C3S
4. Type 4 or low heat of hydration pc
# develops strength at a slower rate than does type 1
# intended for mass structures such as large gravity dams
5. Type 5 or sulfate resisting pc
# when high sulfate resistance is desired
# when concrete is to be exposed to severe sulfate action by soil or water
# contains less C3A
For more topics join @COTMp
๐1
Mortar is a mixture of cement, aggregate, and water. The mortar paste hardens on drying and binds the bricks, stones or concrete blocks together.
Uses of mortar:
1: Used in masonry to bind stones, bricks, and concrete block together.
2: Used for pointing the joints and to give the work a pleasing and smooth finish.
3: Bonding masonry units together, either non reinforced or reinforced.
4: Leveling or seating the units.
5: For pointing the joints of masonry.
6: For plastering the masonry to protect it from the weather and give a smooth finish.
7: In concrete, it is used to bind the particles of coarse aggregate into one solid mass.
Uses of mortar:
1: Used in masonry to bind stones, bricks, and concrete block together.
2: Used for pointing the joints and to give the work a pleasing and smooth finish.
3: Bonding masonry units together, either non reinforced or reinforced.
4: Leveling or seating the units.
5: For pointing the joints of masonry.
6: For plastering the masonry to protect it from the weather and give a smooth finish.
7: In concrete, it is used to bind the particles of coarse aggregate into one solid mass.
๐1
LAWS OF CONTRACT
according to civil code art.1675
Contract is an agreement b/n 2 parties and it needs to be
๐concent
๐legal and lawful
๐possible
๐valid before court
๐must has offeree and offerer
.
.
.etc
Purpose of contract
๐to avoid risk of non performance
๐to describe scope of work
๐to establish time frame
๐to establish cost and payment provision
๐to set for the obligation and relationships
๐to manage multiple risk
๐to minimize dispute and claim
Types of construction contract
1Lump sum:- the contractor offered to do the whole work for the total stipulated money
2 Unit rate:- amount to be received by the contractor depends up on the quantities of various items of work actually executed
3 Lump sum and Schedule:- contractor offered to do a particular work at a fixed sum within a specified time as per plan and specifications
4 Cost plus:- used in difficult situation either for the owner or contractor to predict the cost during negotiations
4.1Cost plus fixxed fee
4.2 Cost plus percentage of cost
.
.
.
For more updates join
๐๐๐๐๐๐๐
http://t.me/COTM
๐๐๐๐๐๐๐
according to civil code art.1675
Contract is an agreement b/n 2 parties and it needs to be
๐concent
๐legal and lawful
๐possible
๐valid before court
๐must has offeree and offerer
.
.
.etc
Purpose of contract
๐to avoid risk of non performance
๐to describe scope of work
๐to establish time frame
๐to establish cost and payment provision
๐to set for the obligation and relationships
๐to manage multiple risk
๐to minimize dispute and claim
Types of construction contract
1Lump sum:- the contractor offered to do the whole work for the total stipulated money
2 Unit rate:- amount to be received by the contractor depends up on the quantities of various items of work actually executed
3 Lump sum and Schedule:- contractor offered to do a particular work at a fixed sum within a specified time as per plan and specifications
4 Cost plus:- used in difficult situation either for the owner or contractor to predict the cost during negotiations
4.1Cost plus fixxed fee
4.2 Cost plus percentage of cost
.
.
.
For more updates join
๐๐๐๐๐๐๐
http://t.me/COTM
๐๐๐๐๐๐๐
๐1
Types of Joints in Construction
Construction Joints
Expansion Joints
Contraction Joints
Construction Joints
At first, we cannot pour a larger quantity of concrete in a
single time. So at that time, a certain portion has poured as
per the recommended shuttering design and the remaining
portion will be poured after a certain period.
In that, the construction joints are using to connect the old
and fresh concrete and it is also called as cold joints.
Construction Joints
Expansion Joints
Contraction Joints
Construction Joints
At first, we cannot pour a larger quantity of concrete in a
single time. So at that time, a certain portion has poured as
per the recommended shuttering design and the remaining
portion will be poured after a certain period.
In that, the construction joints are using to connect the old
and fresh concrete and it is also called as cold joints.
๐1
Specification of Construction Joints
The existing concrete should have an uneven surface
and free from dust.
A proper vibration has to be done near to the joint to
develop the proper bond between the old and new
concrete.
After pouring of new concrete the joint surface must
be clean out laitance and slurry by the wire brush.
The existing concrete should have an uneven surface
and free from dust.
A proper vibration has to be done near to the joint to
develop the proper bond between the old and new
concrete.
After pouring of new concrete the joint surface must
be clean out laitance and slurry by the wire brush.
๐1
Expansion Joints
As we discussed, the construction materials are formed by
the different raw material. The concrete may shrink or
expand due to the weather condition.
So the expansion joints gap are provided to accommodate
the movement happening by the expansion or shrinkages
and it is avoiding the disfiguration of the structure.
Mostly the expansion joint gaps are providing in large
structure & bridge girder to spread eventual stress. The joint
gaps are filled by the expansion material like fibre, bitumen
or some other special material.
As we discussed, the construction materials are formed by
the different raw material. The concrete may shrink or
expand due to the weather condition.
So the expansion joints gap are provided to accommodate
the movement happening by the expansion or shrinkages
and it is avoiding the disfiguration of the structure.
Mostly the expansion joint gaps are providing in large
structure & bridge girder to spread eventual stress. The joint
gaps are filled by the expansion material like fibre, bitumen
or some other special material.
Specification
Expansion joint might be provided in mid of each
span in bridges.
The provision of expansion joints is when the
structure length exceeding 45m.
The reinforcements should not be provided on the
expansion joint area.
The expansion joint material will be different based on
the structure.
The expansion joints are provided as per IS 3414.
Contraction Joints
It is another type of joints which controls the cracks
happening due to shrinkages. The contraction joints are
placed as a groove where the crack may form in concrete.
If the shrinkage crack is formed in the concrete slab then
the contraction joints prevent spreading on the other area.
Expansion joint might be provided in mid of each
span in bridges.
The provision of expansion joints is when the
structure length exceeding 45m.
The reinforcements should not be provided on the
expansion joint area.
The expansion joint material will be different based on
the structure.
The expansion joints are provided as per IS 3414.
Contraction Joints
It is another type of joints which controls the cracks
happening due to shrinkages. The contraction joints are
placed as a groove where the crack may form in concrete.
If the shrinkage crack is formed in the concrete slab then
the contraction joints prevent spreading on the other area.
โค1๐1
Contraction Joints
It is another type of joints which controls the cracks
happening due to shrinkages. The contraction joints are
placed as a groove where the crack may form in concrete. If the shrinkage crack is formed in the concrete slab then the contraction joints prevent spreading on the other area.
Specification The width of the groove should not be less than 5mm.
The contraction joint depth is 1/4th of the Concrete mean depth.
It should be placed in the weakest zone of the slab.
Another name of contraction joint is Control Joint .
It is another type of joints which controls the cracks
happening due to shrinkages. The contraction joints are
placed as a groove where the crack may form in concrete. If the shrinkage crack is formed in the concrete slab then the contraction joints prevent spreading on the other area.
Specification The width of the groove should not be less than 5mm.
The contraction joint depth is 1/4th of the Concrete mean depth.
It should be placed in the weakest zone of the slab.
Another name of contraction joint is Control Joint .