🛑ልዩ የ Interior Design እና Software ስልጠና ከሰርተፊኬት ጋር

📞 0984121839

📍የማታ

ሰኞ - እሁድ (ከ11:30-1:30)

📍የቅዳሜ እና እሁድ

ቅዳሜ ጠዋት 3:00 - 6:00 ፣ ከሰዓት 7:30-10:30
እሁድ ጠዋት 3:00 - 6:00 ፣ ከሰዓት 7:30-10:30


✅ልምድ ባላቸው የዩኒቨርሲቲ መምህራን ና አርክቴክቶች የሚሰጥ ልዩ ስልጠና።


✅ይህ Course ስለ Interior Design, ማወቅ ያለቦትን ሁሉንም መሰረታዊ ነገሮች የሚያካትት ነው

✳️ የኮርሱ ዝርዝሮች

✅ Fundamental of Interior Design

✅ Archicad 3D For Interior Design

✅ Rendering in Lumion



✳️ በተመጣጣኝ ዋጋ 15, 000 ETB ለ3 ወር!


📞 0984121839
📥
Telegram:- https://t.me/archidemyy

የአውሮፓ ረዥሞቹ ሰማይጠቀስ ህንጻዎች።

ከዘጠኙ ረዣዥም ህንጻዎች ውስጥ ሰባቱ ሩስያ ውስጥ ይገኛሉ።

በ Sara Wiatrak የተዘጋጀ ምስል

@etconp

Intercon Construction Chemicals 
    
👉 Authorized agent of MC, SIMENTEK, Sika, Weber

● Concrete Admixtures
● Bonding Agents
● Waterproofings
● Concrete Repair, Grouting   
● Tile Adhesive & Tile Joint Fillers 
● Wall Putty, Prime Coat, Rush Coat
● Quartz, Contextra
● Floor hardener, Epoxy              
● Geotextiles, Geo-membranes and other construction chemicals and materials

Tel: 0961955555 or 0944774267
Address: Signal, around signal mall

👉What is Bridge

🚧A bridge is a structure that spans a physical obstacle, such as a body of water, valley, or road, to provide a passage for vehicles, pedestrians, trains, or utilities.

Bridges are vital for transportation and infrastructure, facilitating the movement of people and goods. There are various types of bridges, each designed to meet specific architectural, structural, and functional requirements.

💫Here are some common types of bridges:

1. Beam Bridge: This is one of the simplest types of bridges, consisting of horizontal beams supported by piers. The weight of the bridge and the load is transferred directly to the supports. Beam bridges are typically used for short spans.

2. Arch Bridge: Arch bridges have a curved structure that transmits the load to supports at either end. The arch shape allows for the distribution of weight evenly, making it suitable for longer spans than beam bridges.

3. Truss Bridge: Made of a framework of triangular trusses, this bridge design allows for efficient weight distribution. Truss bridges can be built with various materials, including wood and steel, and are suitable for longer spans.

4. Suspension Bridge: Characterized by cables suspended between towers, with additional cables supporting the bridge deck, suspension bridges are ideal for long spans and are particularly effective in areas prone to strong winds.

5. Cable-Stayed Bridge: Similar to suspension bridges, cable-stayed bridges have cables that are attached directly to one or more towers. The design allows for a rigid structure that is efficient for medium to long spans.

6. Cantilever Bridge: This type of bridge is built using cantilevers, which are structures that project horizontally into space, supported only on one end. Cantilever bridges are typically used for medium spans and can be constructed with various materials.

7. Arch-Rib Bridge: This variation of an arch bridge features ribs that support the deck, combining the aesthetics of an arch with the structural benefits of a truss.

8. Floating Bridge: Also known as a pontoon bridge, this type of bridge is supported by floating structures. Floating bridges are often used in bodies of water where traditional piers cannot be constructed.

@etconp

👉Increasing the bearing capacity of soil

🏷Increasing the bearing capacity of soil Use To support building construction footings is a crucial aspect of geotechnical engineering.

⭐️There are several methods and techniques that can be employed, depending on the site's specific conditions, soil characteristics, and the type of structure being built.

📜Here are some common approaches:

❇️1. Soil Improvement Techniques

- Compaction: Increasing the density of soil through mechanical means can enhance its bearing capacity. This can be done using various compaction equipment like rollers, vibratory plates, or compactors.

- Densification: Techniques such as dynamic compaction or vibro-replacement (adding gravel columns) can help densify loose or soft soils.

- Grouting: Injecting grout or other materials into the soil can increase its strength and reduce settlement. This includes methods like pressure grouting, chemical grouting, or polyurethane grouting.

- Soil Stabilization: This involves mixing soil with stabilizing agents (such as lime, cement, or fly ash) to improve its physical and chemical properties, resulting in increased strength and reduced plasticity.

❇️2. Foundation Design Alternatives

- Wider Footings: Increasing the size of the footings (making them wider) distributes the load over a larger area, reducing the pressure on the ground and increasing the effective bearing capacity.

- Deep Foundations: If the soil near the surface has low bearing capacity, deep foundations such as piles or drilled shafts can be extended into more competent soil layers that can support the loads.

- Raft or Mat Foundations: These large, thick slabs spread the load over a wider area and can be effective in reducing the pressure on weaker soils.

❇️3. Drainage and Groundwater Control

- Drainage Systems: Poor drainage can lead to soil saturation, which decreases bearing capacity. Implementing proper drainage systems (like French drains or ditches) can help manage groundwater levels, ensuring the soil remains stable.

- Excavation and Backfill: In some cases, it may be necessary to excavate unsuitable soils and replace them with better material or engineered fill compacted to achieve the desired bearing capacity.

@etconp

👉A hydrometer test is a laboratory procedure used primarily in geotechnical engineering and soil science to determine the particle size distribution of fine-grained soil (particles smaller than 0.074 mm or #200 sieve).

🏷The test involves measuring the specific gravity of soil suspensions at different heights over time, which allows for the calculation of the concentration of soil particles in suspension.

⭐️Purpose and Uses:

💫1. Soil Classification: The hydrometer test helps classify soils according to their grain size, which is essential in many engineering and construction applications.

💫2. Geotechnical Engineering: Engineers use the results to evaluate the physical and engineering properties of soils, such as their permeability, compaction characteristics, and stability.

💫3. Environmental Studies: It helps assess soil contamination and erosion processes by analyzing the distribution of fine particles.

💫4. Agriculture: Understanding soil texture helps farmers make informed decisions about irrigation, crop selection, and soil amendment practices.

🚧Test Procedure:

⏺1. Soil Sample Preparation: A soil sample is taken and mixed with water and a dispersing agent to separate the particles.

⏺2. Sedimentation: The mixture is placed in a graduated cylinder, and the hydrometer is inserted into the liquid. The hydrometer measures the specific gravity of the suspension at predetermined time intervals.

⏺3. Data Collection: The density of the suspension decreases over time as the larger particles settle more quickly than the finer ones. The readings from the hydrometer, combined with the time of measurement, are used to calculate the particle size distribution.

⏺4. Analysis: The results are plotted on a graph, typically a particle size distribution curve, which provides valuable information on the soil texture.

📜Overall, the hydrometer test is a crucial tool for a wide range of fields, enabling the analysis and understanding of soil behavior under different environmental and engineering conditions.

@etconp

👉ውድ ቤተሰቦቻችን ምርጥ የ SAP ሶፍትዌር ቲቶርያል በ YOUTUBE ቻናላችን እንደጀመርን ይታወቃል

🌟እንሆ SAP 2000 በ ኣማርኛ ክፍል 3 አሁን ለቀነዋል

✳️በ ክፍል 3 የዳስነው Roof በ SAP እንዴት ዲዛይን እንደሚደረግ ነው

🙏ለ YOUTUBE ቻናላችን አዲስ ከሆኑ SUBSCRIBE በማረግ ቤተሰብ ይሁኑ እንዲሁም ለወዳጅዎ ያጋሩ

🖱Amharic SAP 2000 Tuetorial Part 3 👇

https://youtu.be/5pJVBdxjW8Y

#ADVERTISEMENT

🔧📐📐ፀግሽ ፕሌት እና ጄቦልት 📐📐  
                 መማምረቻ ድርጅት⚙🔧🛠


🛠🛠🛠የምንሰጣቸው አገልግሎቶች🛠🛠🛠

1 መገለጫችን የሆነው የሞደፊክ ስራዎች

2 እዲሁም ፕሌት ከ 1ሚሊም እስከ 30 ሚሊም እንቆርጣለን እበሳለን

3 በመቀጠል ጄቦልት 12ሚ እስከ 32ድረስ ጥርስ አውጥተን አጥፈን እናቀርባለን

4 የተለያዩ ቦልቶች በፈለጉት መጥን

                መገኛችን

ቁ1በእጆት ባለ ስልክ ለናተ ቅርብ

ቁ2 በታታሪዎች መገኛ ኮርቻ ተራ

ቁ3 አየር ጤና ኪዳን ምህረት ጊቢ ማንኛውም ልሜራ   
      እዛው በዘመናዊ ማሽን እቆርጣለን
ቁ  4 ሴሚት ፍየል ቤት በቅርባ ባራቱም አቅጣጫ

ማሳሰብያ
ከጊዜው አንፃር የዋጋ ንረት ካሳሰቦት እኛጋ እሚገርም መፍትሄ አለ በማያስቡት መልክ ስራዎን ይሰራሉ ይደውሉ

ስልክ ቁጥር
0912492727
0913061530
0923764834

መልካም ስራ ለራስ ነው ቸር ይግጠማቹ ፀግሽ   
ፕሌት እና ጄቦልት!

🛑ልዩ የ Interior Design እና Software ስልጠና ከሰርተፊኬት ጋር

📞 0984121839

📍የማታ

ሰኞ - እሁድ (ከ11:30-1:30)

📍የቅዳሜ እና እሁድ

ቅዳሜ ጠዋት 3:00 - 6:00 ፣ ከሰዓት 7:30-10:30
እሁድ ጠዋት 3:00 - 6:00 ፣ ከሰዓት 7:30-10:30


✅ልምድ ባላቸው የዩኒቨርሲቲ መምህራን ና አርክቴክቶች የሚሰጥ ልዩ ስልጠና።


✅ይህ Course ስለ Interior Design, ማወቅ ያለቦትን ሁሉንም መሰረታዊ ነገሮች የሚያካትት ነው

✳️ የኮርሱ ዝርዝሮች

✅ Fundamental of Interior Design

✅ Archicad 3D For Interior Design

✅ Rendering in Lumion



✳️ በተመጣጣኝ ዋጋ 15, 000 ETB ለ3 ወር!


📞 0984121839
📥
Telegram:- https://t.me/archidemyy