Intercon Construction Chemicals 
    
👉 Authorized agent of MC, SIMENTEK, Sika, Weber

● Concrete Admixtures
● Bonding Agents
● Waterproofings
● Concrete Repair, Grouting   
● Tile Adhesive & Tile Joint Fillers 
● Wall Putty, Prime Coat, Rush Coat
● Quartz, Contextra
● Floor hardener, Epoxy              
● Geotextiles, Geo-membranes and other construction chemicals and materials

Tel: 0961955555 or 0944774267
Address: Signal, around signal mall

#ADVERTISEMENT

🔧📐📐ፀግሽ ፕሌት እና ጄቦልት 📐📐  
                 መማምረቻ ድርጅት⚙🔧🛠


🛠🛠🛠የምንሰጣቸው አገልግሎቶች🛠🛠🛠

1 መገለጫችን የሆነው የሞደፊክ ስራዎች

2 እዲሁም ፕሌት ከ 1ሚሊም እስከ 30 ሚሊም እንቆርጣለን እበሳለን

3 በመቀጠል ጄቦልት 12ሚ እስከ 32ድረስ ጥርስ አውጥተን አጥፈን እናቀርባለን

4 የተለያዩ ቦልቶች በፈለጉት መጥን

                መገኛችን

ቁ1በእጆት ባለ ስልክ ለናተ ቅርብ

ቁ2 በታታሪዎች መገኛ ኮርቻ ተራ

ቁ3 አየር ጤና ኪዳን ምህረት ጊቢ ማንኛውም ልሜራ   
      እዛው በዘመናዊ ማሽን እቆርጣለን
ቁ  4 ሴሚት ፍየል ቤት በቅርባ ባራቱም አቅጣጫ

ማሳሰብያ
ከጊዜው አንፃር የዋጋ ንረት ካሳሰቦት እኛጋ እሚገርም መፍትሄ አለ በማያስቡት መልክ ስራዎን ይሰራሉ ይደውሉ

ስልክ ቁጥር
0912492727
0913061530
0923764834

መልካም ስራ ለራስ ነው ቸር ይግጠማቹ ፀግሽ   
ፕሌት እና ጄቦልት!

👉በሲሚንቶ ኮንክሪት የሚገነቡ መንገዶች በመላው አለም ተመራጭነታቸው ከጊዜ ወደ ጊዜ እየጨመረ መጥቷል።

ኢትዮጵያን ለመሳሰሉ ከፍተኛ የመንገድ መሠረተ ልማት ለሚያካሂዱ ሀገሮች ደግሞ በሲሚንቶ ኮንክሪት የሚገነቡ መንገዶች አዋጪ መሆናቸው ሳይታለም የተፈታ ነው።

በተለይ ኢትዮጵያ በከፍተኛ የውጪ ምንዛሬ ለአስፋልት ኮንክሪት የሚሆን ቢቱሜን (ሬንጅ) ከውጪ ከማስመጣት፣ ሲሚንቶን በስፋት አምርታ ተጠቃሚ መሆን ትችላለች።

በመጪዎቹ ወራትም በኢትዮጵያ በቀን 10 ሺህ ቶን ሲሚንቶ የሚያመርት ግዙፍ ሲሚንቶ ማምረቻ ፋብሪካ ወደ ሥራ ይገባል።

አሁን በቅርቡ ህንድ እንኳን፣ ከሙምባይ እስከ ናግፑር ከተማ 700 ኪሎ ሜትር የሚሸፍን ስድስት ሌን ያለው የፈጣን መንገድ ግንባታን በሲሚንቶ ኮንክሪት ገንብታ ለምርቃት ዝግጁ ማድረጓ እየተሰማ ነው።

በህንድ በ2018 የመሠረት ድንጋይ ተቀምጦለት የነበረው የዚህ መንገድ ጅምሮ በመጪው ሰኔ ይመረቃል። ይህ በሲሚንቶ ኮንክሪት የተገነባው መንገድ ላይ 33 ትላልቅ ድልድዮች፣ 274 አነስተኛ ድልድዮች እና 6 የዋሻ ውስጥ መተላለፊያዎች እና ሌሎች 65 ተሻጋሪ መንገዶችን ያቀፈ ነው።

በሲሚንቶ ኮንክሪት የሚገነቡ መንገዶች፣ በአስፋልት ኮንክሪት ከሚገነቡ መንገዶች ይልቅ ተመራጭ እየሆኑ የመጡት፣ በሲሚንቶ የሚገነቡ መንገዶች ረጅም አመት ስለሚቆዩ ነው። በዚያም ላይ በሲሚንቶ ኮንክሪት የሚገነባ መንገድ የጥገና ወጪም የለበትም።
-------------------------------------------

@etconp

👉ሰላም ውድ ቤተሰቦቻችን ኣዲስ የ ETABS በ ኣማርኛ ቲቶርያል ከ introduction ጀምሮ Analysis እና Design ኣካተን ምርጥ ቪድዮ እየለቀቅን እንደምንገኝ ይታወቃል።

🫵እንሆ ቀጣዩ ክፍል 4 👇

https://youtu.be/gKJ1EOwLP-k?si=ILh-MEkFRI0Yiamt

👉የግንባታ ዲዛይን ከተሰራ በኋላ የሚመለከተው የመንግሥት ቢሮ ዲዛይኖቹን (All drawings, details and BOQ) አይቶ እስከማረጋገጥ (መርምሮ አስተያየት ከመስጠት እስከማጽቀድ) የሚወስድበት ጊዜ በመመሪያ የተደነገገ ሲሆን ከፍተኛው ውስብስብነት እና ግዝፈት ላላቸው ሕንጻዎች (ምድብ ሐ) የሚወስደው ጊዜ 21 ቀን ነው።

➡️አንድ የግንባታ ፍቃድ ከ21 ቀን በላይ የማጽደቂያ ጊዜ ሊራዘምበት አይገባም።

➡️የህንጻ መመሪያና ስታንዳርድ  ቁጥር 3/2015  (4.8)

📩የተለያዩ ማነዋል ቅፅ ወይም መፅሐፍ ከፈለጋችሁ በውስጥ መስመር አናግሩን!

@ETCONpWORK

👉Amazing Fact etconp

💫የጥንት ቻይናውያን 21,196 ኪሜ የሚረዝመውን ታላቁን ግንብ ሲገነቡ የኖራ(Calcium hydro oxide) እና የሚያጣብቅ ሩዝ ድብልቅን እንደ ማያያዣ ወይም እንደ ሲሚንቶ ይጠቀሙ ነበር።

⭐️ይህ ዘዴ ድንጋዮቹን አንድ ላይ ለማገናኘት የሚረዳ ጠንካራ እና በውሃ የማይበላሽ ማጣበቂያን ፈጥሮ የታላቁ ግንብ ክፍሎችን ጨምሮ ብዙ መዋቅሮቹ ለብዙ መቶ ዘመናት ሳይፈርሱ እንዲቆዩ ማድረግ ችሏል።

@etconp

👉በነገራችን ላይ የ Youtube ቻናላችን ቤተሰብ ካልሆነ ከታች ባለው ሊንክ ገብተው ይቀላቀሉን

🏷የ ኮንስትራክሽን ሶፍትዌሮች በ ኣማርኛ ቋንቋ ይማሩ👇

https://youtube.com/@ethiopianconstruction?si=i3B2u9LyWBNjqAAO

@etconp

👉Summary for the Difference between Construction Engineer and Site Engineer

-----------------------------------------------

@etconp

👉አንዳንድ ሳይት ላይ የተለመዱ የ አማርኛ ቃላቶች እንገራችሁ

➡️ሰጌቶ = steel saw

➡️ፌረዮ = someone who works with reinforcements

➡️ግሪላ = reinforcement used for the placement of footing

➡️ፎንዶ (bottom soffit) = used as a form work for beam and slab at the bottom.

➡️ስፖንዳ (side board) = used as form work for beams and slabs on vertical sides

➡️መቀሰቻ (brace) = supports a vertical side form work of beam, and column panel diagonally

➡️ስታፋ (stirrup) = shear resistant bar of the column, beams, and shear walls

➡️ቱምቢ (plumb Bob) = it is used to check the perpendicularity of columns.

➡️ከበሌቶ = used To separate Top reinforcement Bar From bottom Reinforcement Bar of slab.

➡️ሞዲኖ (profile) = used for setting out works

➡️ሲባጎ (string) = used to maintain alignments

➡️ክራቫት (Yoke) = used to fix the form works together in their position.

📩የቀሩትን ኮሜንት ላይ ፃፉልን🙏

@ETCONpWORK

Intercon Construction Chemicals 
    
👉 Authorized agent of MC, SIMENTEK, Sika, Weber

● Concrete Admixtures
● Bonding Agents
● Waterproofings
● Concrete Repair, Grouting   
● Tile Adhesive & Tile Joint Fillers 
● Wall Putty, Prime Coat, Rush Coat
● Quartz, Contextra
● Floor hardener, Epoxy              
● Geotextiles, Geo-membranes and other construction chemicals and materials

Tel: 0961955555 or 0944774267
Address: Signal, around signal mall

ታምራት  ፕሌት እና ጄቦልት አቅራቢ

📌ፕሌትና ጄቦልት በፈለጉት አይነት የተዘጋጀ አለን

✂️ላሜራ መቁረጫ መብሻና  ማጠፊያ ማሽኖች አሉን

🔗ፌሮ (ቶንዲኖ) ጥርስ እናበጃለን እንዲሁም እናጥፋለን

📐ማንኛዉንም የሞደፊክ ስራዎችን እንሰራለን

📍ኢትዮጵያ ዉስጥ የትም እንልክሎታለን

አድራሻችን፦ ቁ.1 አዉቶብስ ተራ(መሳለሚያ)
                    ቁ.2 መርካቶ
                    ቁ.3 ተክለሀይማኖት

0904040477
0911016833

👉𝑪𝒐𝒔𝒕 𝑬𝒔𝒕𝒊𝒎𝒂𝒕𝒊𝒐𝒏 𝑻𝒆𝒄𝒉𝒏𝒊𝒒𝒖𝒆𝒔 𝒊𝒏 𝑪𝒐𝒏𝒔𝒕𝒓𝒖𝒄𝒕𝒊𝒐𝒏 𝑷𝒓𝒐𝒋𝒆𝒄𝒕𝒔

》Construction Cost Estimate

Predictive process involve application of techniques that convert quantified technical project info into financial resource info by quantifying required resources cost to fulfill project scope
Applied during each phase of project life cycle as project scope is defined, modified & refined

》Major advantages of making solid construction cost estimate:

-Improve Plan
-Save Money
-Allow to Make Better Bid Comparisons
-Reduce Risk
-Cut Down on Change Orders

》Cost Included in Construction Cost Estimate

-Contingency & Variance
-Equipment
-Indirect Cost
-Labor
-Material
-Professional Fee
-Quality

》Estimator Cost Information source

-Historical Data
-Cost Research
-Expert Judgment

》Major Cost Estimation Techniques

-Analogous estimate
-Bottom-up estimate
-Parametric estimate
-Cost of Quality
-Delphi cost estimate
-Empirical Costing Method
-Expert Judgment
-Reserve Analysis
-Resource costing
-3-Point Estimate
-U.S. Government Accountability Office (GAO) 12-step process
-Cost Estimating Software(e.g. Monte Carlo method)
-Vendor Bid Snalysis

》What Makes a Good Cost Estimate?

-Accuracy
-Confidence Level
-Credibility
-Documentation
-Precision
-Reliability
-Risk detailing
-Uniformity
-Validity
-Verification

》Inaccurate Project Cost Estimate Causes (Most Likely)

-Lack of experience with similar projects
-Length of planning horizon & project
-Human resources
-Not fully understand work involved to complete work packages
-Expect resources to work at maximum productivity
-Divide tasks between multiple resources
-Fail to identify risk & to prepare adequate contingency plan & reserve
-Not updating cost estimate after project scope changes
-Creating hasty, inaccurate estimates because of stakeholder pressure
-Stat estimates as fixed sum, rather than ranges
-Make project fit fixed budget amount

》Construction Cost Estimate by Level of Accuracy

American Society of Professional Estimators (ASPE) classify estimates according to 5-level system.

The least accurate & reliable label is Level 1 & most accurate & reliable is Level 5.

Confusingly, some authorities such as AACE & U.S. DOE reverse numbering, designating Level 1 as most precise estimate

-Level 1:Order-of-Magnitude Estimate
(Project definition at 0-2% & accuracy of estimate is within a margin of 20-30%)

-Level 2:Construction Feasibility Estimate
(Definition range 5-20% & accuracy range 10-25%)

-Level 3:Preliminary Construction Estimate
(Project definition range 10-40% & accuracy range 10-15%)

-Level 4:Substantive Construction Estimate
(Project is > 90% defined & accuracy 5-10%)

-Level 5:Definitive Construction Estimate
(maximum accuracy (0-2% variance & virtually 100% project definition)

》Construction Estimate Classification by Accuracy & Phase

-Design Estimate
-Bid Estimate
-Control estimate
-Performance vs. Forecast Estimate
-Current Working Estimate

@etconp

👉THE 3-4-5 METHOD

🚧This is an essential technique in the construction and civil engineering fields to accurately trace right angles on construction sites.

💫Based on the Pythagorean theorem, it guarantees the orthogonality of structures, ensuring their stability and proper alignment.

⭐️Application of the 3-4-5 method:

1. Measurement: Starting from an origin point, measure 3 units along a reference line and mark this point.

2. Second measurement: From the origin point, measure 4 units perpendicularly to the first line and mark this point.

3. Verification: Measure the distance between the two marked points; it should be 5 units. If this is the case, the angle formed is a right angle.

❇️This method is particularly useful for laying foundations, aligning walls, and verifying the perpendicularity of structural elements.

⏺It is simple to implement and only requires basic tools such as a tape measure.

⏺For a visual demonstration of this technique, you can refer to the following tutorial:

▶️3-4-5 method for drawing a perpendicular in construction

📍By adopting the 3-4-5 method, construction and public works professionals can ensure the precision and quality of their projects, thus contributing to the durability and safety of infrastructures.

@etconp