Ethio Construction Engineering
32.3K subscribers
6.28K photos
359 videos
1.99K files
3.35K links
🔨 World Construction Engineering
Latest updates, tips, and tutorials on building, civil engineering, and construction in World.
Learn, build, and grow with us!

📨 @Philemona7 Or @ETCONpBOT

For Ad:- https://telega.io/c/etconp
Download Telegram
The Importance of Water/Cement Ratio
.
Three simple ingredients can be blended and proportioned numerous ways to make concrete: aggregate, cement and water.
In concrete, the single most significant influence on most or all of the properties is the amount of water used in the mix.
In concrete mix design, the ratio of the amount of water to the amount of cement used (both by weight) is called the water to cement ratio (w/c). These two ingredients are responsible
for binding everything together.
The water to cement ratio, or w/c ratio, largely determines the
strength and durability of the concrete when it is cured
properly.
The w/c ratio refers to the ratio of the weights of water and cement used in the concrete mix.
A w/c ratio of 0.4 means that for every 100 lbs of cement used in the concrete, 40 lbs of water is added.
For ordinary concrete (sidewalks and driveways), a w/c ratio of 0.6 to 0.7 is considered normal.
A lower w/c ratio of 0.4 is generally specified if a higher quality concrete is desired.
The practical range of the w/c raio is from about 0.3 to over 0.8. A ratio of 0.3 is very stiff (unless superplasticizers are used), and a ratio of 0.8 makes a wet and fairly weak concrete. For reference, a 0.4 w/c ratio is generally expected to make a concrete with a compressive strength (its f’c) of about 5600 psi when it is properly cured.
On the other hand, a ratio of 0.8 will make a weak concrete of only about 2000 psi.
The simplest way to think about the w/c ratio is to think that the greater the amount of water in a concrete mix, the more
dilute the cement paste will be.
This not only affects the compressive strength, it also affects the tensile and flexural strengths, the porosity, the shrinkage and the color.
The more the w/c ratio is increased (that is, the more water that is added for a fixed amount of cement), the more the strength of the resulting concrete is reduced.
This is mostly because adding more water creates a diluted paste that is weaker and more susceptible to cracking and shrinkage.
Shrinkage leads to micro-cracks, which are zones of weakness. Once the fresh concrete is placed, excess water is squeezed out of the paste by the weight of the aggregate and
the cement paste itself. When there is a large excess of water,
that water bleeds out onto the surface. The micro channels
and passages that were created inside the concrete to allow
that water to flow become weak zones and micro-cracks.
Using a low w/c ratio is the usual way to achieve a high
strength and high quality concrete, but it does not guarantee
that the resulting concrete is always appropriate for
countertops. Unless the aggregate gradation and proportion
are balanced with the correct amount of cement paste,
excessive shrinkage, cracking and curling can result. Good
concrete results from good mix design, and a low w/c ratio is
just one part of a good mix

@etconp