👉Understanding Ribbed Slab Load Transfer Why Beams Look "Oversized"

🚧Ever been on-site and noticed this?

✨ Girders wider than the columns, or
✨ Beams that look too wide compared to their depth...
Especially in ribbed slab systems?

🔰It’s not poor design it’s a structural necessity. Here’s why 👇

🔄 Load Transfer in Ribbed Slabs Unlike solid slabs, ribbed slabs (also called waffle or voided slabs) follow this path:

➡️ Topping Slab ➡️ Ribs ➡️ Beams ➡️ Girders ➡️ Columns

📌 Unlike solid slab systems that transfer loads more uniformly in both directions, ribbed slabs concentrate loads along the ribs.

⏺These ribs act like joists, channeling loads directly to secondary beams, which then deliver the concentrated forces to the main girders.

💡 So why do girders appear wider?

Because they’re receiving multiple concentrated point loads from the ribs.

✅To spread these loads and avoid punching shear or localized failures, the girder's width will be increased, sometimes even wider than the supporting columns.

🏷Also, these wider beams may appear shallow compared to typical T-beams under solid slabs, but their width ensures:

✅ Better load distribution
✅ Reduced deflection
✅ Efficient rib anchorage

💫Why Use Ribbed Slabs?

✅ Lighter dead load
✅ Material savings (less concrete)
✅ Longer span capability
✅ Easier MEP integration
✅ Better thermal & sound insulation
✅ Cost-effective for repetitive layouts

Via ECEM Solutions

@etconp

ታምራት  ፕሌት እና ጄቦልት አቅራቢ

📌ፕሌትና ጄቦልት በፈለጉት አይነት የተዘጋጀ አለን

♧ ሁሉን በአንድ ቦታ ለሁሉም ቅርብ

📍ኢትዮጵያ ዉስጥ የትም እንልክሎታለን

♧ ይደውሉልን ያማክሩን

0904040477
0994941708

👉Design Principles of Deep Foundation

🚧The design of deep foundations depends on a thorough geotechnical analysis and structural requirements.

📜Key principles include:

💫1. Load-Bearing Capacity

⏺The foundation must be able to support the vertical, horizontal, and uplift loads of the structure.

⏺This is determined by soil strength, pile material, and dimensions.

💫2. Settlement Analysis

⏺Excessive settlement can compromise structural integrity.

⏺Designers ensure that the foundation experiences uniform and minimal settlement, aligning with safety margins.

💫3. Depth of Foundation

⏺The depth is determined by factors such as the type of soil, groundwater levels, and the load of the structure.

⏺Deep foundations often extend to layers with high load-bearing capacity.

💫4. Material Selection

⏺Materials must withstand not only the structural loads but also environmental factors like corrosion, temperature fluctuations, and seismic activity.

⏺Concrete and steel are commonly used for their strength and durability.

💫5. Economic Efficiency

⏺Designers aim for cost-effective solutions without compromising safety or functionality.

⏺This involves balancing material costs, labor, and machinery.

@etconp

👉Standard Steps for Measuring Slump of Concrete ( following ASTM C143 / AASHTO T119 ):

💫1. Prepare the Equipment:

● Slump cone (Abrams cone), base plate, tamping rod, and measuring scale.
● Ensure all tools are clean and damp to avoid sticking.

💫2. Position the Cone:

● Place the slump cone on a flat, non-absorbent surface.
● Hold the cone firmly by stepping on its footpieces.

💫3. Fill the Cone in Three Layers:

● Add fresh concrete in three equal layers (each 1/3rd of cone height).
● Avoid overfilling or underfilling.

💫4. Tamp Each Layer:

● Compact each layer with 25 uniform strokes of the tamping rod.
● Penetrate slightly into the layer below when tamping the upper layers.

💫5. Strike Off the Top:

● After the final layer, level the surface with the tamping rod to make it flush.

💫6. Lift the Cone Vertically:

● Carefully lift the cone straight upward in 5–10 seconds without twisting or tilting.

💫7. Measure the Slump:

● Immediately measure the vertical difference between the height of the cone and the highest point of the slumped concrete.

💫8. Record the Slump Type:

● True slump: Uniform subsidence ( desirable ).
● Shear slump: Concrete slides sideways ( may indicate lack of cohesion ).
● Collapse slump: Concrete collapses completely ( too wet or high workability ).

📜Summary:

⏺This procedure outlines the standardized method for determining the slump of fresh concrete using a slump cone apparatus.

⏺The test measures the vertical settlement of concrete under its own weight, which indicates its workability and consistency.

⏺Accurate measurement of slump is essential for assessing the suitability of the concrete mix for various construction applications, ensuring ease of placement and compaction without segregation.

⭐️Conclusion

⏺By adhering to the outlined procedure, the slump of concrete can be measured with precision, providing essential data on its consistency, cohesiveness, and workability. This measurement serves as a critical quality control parameter, ensuring that the concrete mix conforms to specified requirements and supports proper placement, compaction, and structural performance.

@etconp

👉‎የኢትዮጵያ ኮንስትራክሽን ሥራዎች ኮርፖሬሽን በሁለተኛ ዙር ያሰለጠናቸውን 26 የፊውቸር ፕሮጀክት ማናጀሮችን አስመረቀ።

💫‎በምረቃ ፕሮግራሙ ላይ ንግግር ያደረጉት  የኮርፖሬሽኑ ሥራ አመራር ቦርድ ሰብሳቢ እና የኢ.ፌ.ዲ.ሪ መከላከያ ሚኒስትር ኢንጂነር አይሻ መሀመድ ኮርፖሬሽኑ የፕሮጀክት ማኔጅመንት የስልጠና ማዕከልን በማቋቋም በዘርፉ ብቁ ባለሙያዎችን በማሰልጠን ያደረገው አስተዋጽዖ ፕሮጀክትን በጥራት እና በጊዜ ከመፈጸም ባሻገር በኮንስትራክሽን ዘርፉ ኢትዮጵያን በዓለም አቀፍ  ደረጃ ተወዳዳሪ ያደርጋል ብለዋል።

‌‎የኮርፖሬሽኑ ዋና ሥራ አስፈጻሚ ኢንጂነር ዮናስ አያሌው በኮርፖሬሽኑ ኮንስትራክሽን ፕሮፌሽናልስ ዴቨሎፕመንት ኢንስቲትዩት ባለፉት 6 ወራት የተሰጠውን የንድፈ ሀሳብ እና የተግባር ስልጠና የተከታተሉ 26 የፊዩውቸር ፕሮጀክት ማናጀሮች መመረቃቸውን ገልጸው ተመራቂዎች በቀጣይ በኮንስትራክሽን ፕሮጀክቶች ማናጅመንት ሥራዎች ላይ በመሰማራት የኮርፖሬሽኑን ዓለም አቀፋዊ ተወዳዳሪነት እንደሚያሳድጉ ተናግረዋል፡፡

‌‎ተመራቂዎች በ27 የተለያዩ የፕሮጀክት ማኔጅመንት የስልጠና ሞጅሎች ላይ 30 በመቶ የንድፈ ሀሳብ እና 70 በመቶ የመስክ የተግባር ስልጠና የወሰዱ ናቸው።

‌‎በምረቃ ፕሮግራሙ ላይ የኮርፖሬሽኑ የሥራ አመራር ቦርድ አባላት፣ የመንግስት የሥራ ኃላፊዎች፣ የኮርፖሬሽኑ አመራሮች፣ የኮርፖሬሽኑ መሰረታዊ ሰራተኛ ማህበር አመራሮች እና የተመራቂ ቤተሰቦች ተገኝተዋል።

@etconp