đ1
Ethio Construction Engineering
https://t.me/COTMp
Telegram
ETCONp Discussion
đŠáááááá ááŗáĨ áĨá á áĩá°áĢá¨áĩ @Philemona7
âī¸áá ᨠ@etconp áááĢáĢ ááŠááš áááĸ
âThis is discussion group of @ETCONpWORK
.
đááŗá°áĨáĢ ...
.
âĄī¸ááŠá áá ááááá ᨠáŽááĩáĩáĢááŊá ááŗáŽáŊ ááĒ ááá á á ááá á ááááĩá!
@ETCONpBOT áááá áĨááá°ááááđ
âī¸áá ᨠ@etconp áááĢáĢ ááŠááš áááĸ
âThis is discussion group of @ETCONpWORK
.
đááŗá°áĨáĢ ...
.
âĄī¸ááŠá áá ááááá ᨠáŽááĩáĩáĢááŊá ááŗáŽáŊ ááĒ ááá á á ááá á ááááĩá!
@ETCONpBOT áááá áĨááá°ááááđ
đFACTORS AFFECTING CONCRETE STRENGTH
.
âļī¸Concrete strength is effected by many factors, such as quality of raw materials, water/cement ratio, coarse/fine aggregate ratio, age of concrete, compaction of concrete,
temperature, relative humidity and curing of concrete.
1. Quality of Raw Materials:
*Cement: Provided the cement conforms with the appropriate standard and it has been stored correctly (i.e. in dry conditions), it should be suitable for use in concrete.
*Aggregates: Quality of aggregates, its size, shape, texture,
strength etc determines the strength of concrete. The
presence of salts (chlorides and sulphates), silt and clay also
reduces the strength of concrete.
*Water: frequently the quality of the water is covered by a
clause stating â..the water should be fit for drinking..â. This
criterion though is not absolute and reference should be
made to respective codes for testing of water construction
purpose.
2. Water / Cement Ratio:
The relation between water cement ratio and strength of
concrete is shown in the plot as shown below:
The higher the water/cement ratio, the greater the initial spacing between the cement grains and the greater the
volume of residual voids not filled by hydration products.
There is one thing missing on the graph. For a given cement
content, the workability of the concrete is reduced if the
water/cement ratio is reduced. A lower water cement ratio
means less water, or more cement and lower workability.
However if the workability becomes too low the concrete
becomes difficult to compact and the strength reduces. For a
given set of materials and environment conditions, the
strength at any age depends only on the water-cement ratio,
providing full compaction can be achieved.
3. Coarse / fine aggregate ratio:
Following points should be noted for coarse/fine aggregate
ratio: If the proportion of fines is increased in relation to
the coarse aggregate, the overall aggregate surface
area will increase.
If the surface area of the aggregate has increased, the water demand will also increase.
*Assuming the water demand has increased, the
water cement ratio will increase Since the water cement ratio has increased, the compressive strength will decrease.
4. Aggregate / Cement Ratio:
*Following points must be noted for aggregate cement ratio:
If the volume remains the same and the proportion of cement in relation to that of sand is increased the surface area of the solid will increase.
*If the surface area of the solids has increased, the
water demand will stay the same for the constant
workability.
*Assuming an increase in cement content for no
increase in water demand, the water cement ratio will
decrease.
*If the water cement ratio reduces, the strength of
the concrete will increase.
*The influence of cement content on workability and strength
is an important one to remember and can be summarized as
follows:
1. For a given workability an increase in the proportion of
cement in a mix has little effect on the water demand and results in a reduction in the water/cement ratio.
2. The reduction in water/cement ratio leads to an increase
in strength of concrete.
3. Therefore, for a given workability an increase in the
cement content results in an increase in strength of concrete.
5. Age of concrete: The degree of hydration is synonymous with the age of concrete provided the concrete has not been allowed to dry out or the temperature is too low.
*In theory, provided the concrete is not allowed to dry out,
then it wil always be increasing albeit at an ever reducing
rate. For convenience and for most practical applications, it
is generally accepted that the majority of the strength has been achieved by 28 days.
6. Compaction of concrete: Any entrapped air resulting from inadequate compaction of the plastic concrete will lead to a reduction in strength.
If there was 10% trapped air in the concrete, the strength will fall down in the range of 30 to 40%. CONT'D đđđ
.
âļī¸Concrete strength is effected by many factors, such as quality of raw materials, water/cement ratio, coarse/fine aggregate ratio, age of concrete, compaction of concrete,
temperature, relative humidity and curing of concrete.
1. Quality of Raw Materials:
*Cement: Provided the cement conforms with the appropriate standard and it has been stored correctly (i.e. in dry conditions), it should be suitable for use in concrete.
*Aggregates: Quality of aggregates, its size, shape, texture,
strength etc determines the strength of concrete. The
presence of salts (chlorides and sulphates), silt and clay also
reduces the strength of concrete.
*Water: frequently the quality of the water is covered by a
clause stating â..the water should be fit for drinking..â. This
criterion though is not absolute and reference should be
made to respective codes for testing of water construction
purpose.
2. Water / Cement Ratio:
The relation between water cement ratio and strength of
concrete is shown in the plot as shown below:
The higher the water/cement ratio, the greater the initial spacing between the cement grains and the greater the
volume of residual voids not filled by hydration products.
There is one thing missing on the graph. For a given cement
content, the workability of the concrete is reduced if the
water/cement ratio is reduced. A lower water cement ratio
means less water, or more cement and lower workability.
However if the workability becomes too low the concrete
becomes difficult to compact and the strength reduces. For a
given set of materials and environment conditions, the
strength at any age depends only on the water-cement ratio,
providing full compaction can be achieved.
3. Coarse / fine aggregate ratio:
Following points should be noted for coarse/fine aggregate
ratio: If the proportion of fines is increased in relation to
the coarse aggregate, the overall aggregate surface
area will increase.
If the surface area of the aggregate has increased, the water demand will also increase.
*Assuming the water demand has increased, the
water cement ratio will increase Since the water cement ratio has increased, the compressive strength will decrease.
4. Aggregate / Cement Ratio:
*Following points must be noted for aggregate cement ratio:
If the volume remains the same and the proportion of cement in relation to that of sand is increased the surface area of the solid will increase.
*If the surface area of the solids has increased, the
water demand will stay the same for the constant
workability.
*Assuming an increase in cement content for no
increase in water demand, the water cement ratio will
decrease.
*If the water cement ratio reduces, the strength of
the concrete will increase.
*The influence of cement content on workability and strength
is an important one to remember and can be summarized as
follows:
1. For a given workability an increase in the proportion of
cement in a mix has little effect on the water demand and results in a reduction in the water/cement ratio.
2. The reduction in water/cement ratio leads to an increase
in strength of concrete.
3. Therefore, for a given workability an increase in the
cement content results in an increase in strength of concrete.
5. Age of concrete: The degree of hydration is synonymous with the age of concrete provided the concrete has not been allowed to dry out or the temperature is too low.
*In theory, provided the concrete is not allowed to dry out,
then it wil always be increasing albeit at an ever reducing
rate. For convenience and for most practical applications, it
is generally accepted that the majority of the strength has been achieved by 28 days.
6. Compaction of concrete: Any entrapped air resulting from inadequate compaction of the plastic concrete will lead to a reduction in strength.
If there was 10% trapped air in the concrete, the strength will fall down in the range of 30 to 40%. CONT'D đđđ
7. Temperature: The rate of hydration reaction is temperature dependent.
*If the temperature increases the reaction also increases. This
means that the concrete kept at hi gher temperature will gain
strength more quickly than a similar concrete kept at a lower
temperature. However, the final strength of the concrete kept at the higher temperature will be lower. This is because the physical form of the hardened cement paste is less well structured and more porous when hydration proceeds at faster rate.
*This is an important point to remember because temperature
has a similar but more pronounced detrimental effect on
permeability of the concrete.
8. Relative humidity: If the concrete is allowed to dry out, the hydration reaction will stop.
*The hydration reaction cannot proceed without
moisture. The three curves shows the strength development
of similar concretes exposed to different conditions.
9. Curing: It should be clear from what has been said above that the detrimental effects of storage of concrete in a dry
environment can be reduced if the concrete is adequately
cured to prevent excessive moisture loss.
@etconp
*If the temperature increases the reaction also increases. This
means that the concrete kept at hi gher temperature will gain
strength more quickly than a similar concrete kept at a lower
temperature. However, the final strength of the concrete kept at the higher temperature will be lower. This is because the physical form of the hardened cement paste is less well structured and more porous when hydration proceeds at faster rate.
*This is an important point to remember because temperature
has a similar but more pronounced detrimental effect on
permeability of the concrete.
8. Relative humidity: If the concrete is allowed to dry out, the hydration reaction will stop.
*The hydration reaction cannot proceed without
moisture. The three curves shows the strength development
of similar concretes exposed to different conditions.
9. Curing: It should be clear from what has been said above that the detrimental effects of storage of concrete in a dry
environment can be reduced if the concrete is adequately
cured to prevent excessive moisture loss.
@etconp
áá
á¨ááĩááá¨áąáĩ á
áá áŗá á¤áĩ á áĢáŖáĸ á¨ááá ááᤠáĨáá á áŽá ááá á¨á°á¨á áá beam áááá áá
á áá scaffold á°á á
ááá á°ááĸ áá áĩáááŊá? áĨáĩáĒ discussion group áá áĨáááĢá
https://t.me/COTMp
https://t.me/COTMp
đá áŽááĩáĩáĢááŊá áá á¨áááŖáŗ áááá¨áĩ á
áŖáĩ/Liquidated damage/
---------------
âļī¸á ááŖá á á°á(á á áá á¨á á á ááĢáĒ)
====================
*á áŽááĩáĩáĢááŊá áá áá á¨áá á¨áááŖáŗ áĩáĢ á°áĨá á¨á°ááá áá á á˛ááá áĨá áááá áĩááĩááŦáŊá áá°á¨áĩ á áá á á°ááá á á¨áá áá°áĨ á°ááļ áá ááá á¨á°ááĢአáááááĩ áááĄáĄ
*á°ááĢአá¨ááá á¨áááŖáŗ áĩáĢ á áá á á°ááá á á¨áá áá°áĨ á áá áą á°ááļ áĢáá ááá áĨáá°áá á¨áá áá ááááĢ áá/completion date/ á áá áááŖáŗá áĨáĩá¨áá ááá á áĩ áá áĩá¨áĩ ááĨáĢááŗááą áá á°ááĢአá¨áááŖáŗ áááá¨áĩ á áŖáĩ/Liquidated damage/ á¨áááá áááááĩ áááá áŗááĄáĄ
*á áá á á°ááá á á¨áá áá°áĨ á˛áŖá áá áááĩ áá? á ááŗááĩ á á°áĒááŊ/client/ á áááᤠáĨáĨá¨áĩ á áá áá á¨á°ááá á á°ááĢáŠá á á°áĒá ááááŖáŗá áá ááááĢ á¨á°áĩááá áĩá á¨áá áĨááĩ/á¨áá áĨáááá/ ááá á á¨áááá¨á áá á ááĢ áá á¨á°áá¨áá áĩ áá ááᎠáĨáá°áá áá¨áąáŗááĄáĄáá á á¨áŗáĩ áĩá á°áĩ áááĄáĄ
*á áŽááĩáĩáĢááŊá áá áĩá áá á ááŖá á á á°áá á¨áááŖáŗ áá á¨á°á°á¨áá áĩ áá/contract signing date/ áŖááĸááááŊá ááŦáĩ/mobilization period/áŖá¨áŗááĩ ááááĨ/site handover/áŖ á¨áĩáĢ ááááĒáĢ áá/commencement date/ áĨá á¨áĩáĢ áá ááááĢ áá/completion date/ á¨áááĩá áá¨áŗáĩ á¨áááŖáŗ áááá¨áĩ á áŖáĩ/Liquidated damage/ á¨áááá á á ááŖáĄ áááá áá á áááĄáĄ
*á áá°á¨áą á áá á¨á°ááá á á¨áĩáĢ áá¨ááá á¨áá áá°áĨ ááá á á¨áááá¨á á°ááĢአá¨áááŖáŗáá áŗááĩ á¨á á°áĒá á¨á°á¨á¨á á áá áááĄáĄáááá á¨áŗááĩ ááááĨ á áá á¨áĩáĢ ááááĒáĢ áá /commencement date/ á áááá˛áą á¨ááá°á áĨá áá°ááĢአá¨ááááŊááĩ áááááĄáĄ
*áĨááá˛á á¨áá á áááá˛áą á¨ááá°áá á¨áĩáĢ ááááĒáĢ áá ááᎠá áá áá á¨á°ááá á áá ááá áá á¨áĩáĢ áá ááááĢ áá/completion date/ áḠáĨáá°áá áááá áĢáĩáŊáá áááĩ áááĄáĄ
*áĨáá áá ááŗáá á¨áááŖá ááá á áŽááĩáĩáĢááŊá áá áá á¨á°áá°ááá á¨áĩáĢ ááá á¨áá á¨áá ááááĢ áá á áĩááĩá ááá ááá áá áá°á¨á á¨ááŊáá áĩ áĨáĩáá á ááĄáĄ/part work completion/ áááĩ áááĄáĄá¨áá á ááŖá አá¨áá áĨáá°á°áĨáĢáĢá á¨áá°á áááááĄáĄ
*áĩáááá á¨áááŖáŗ áááá¨áĩ á áŖáĩ á¨ááá ááŗá á¨áááŖá á°ááĢአá¨ááá á¨áááŖáŗ áĩáĢ á áá áĩáĢ á¨áá ááááĢ áá /completion date/ áŗáĢá áá á á¨áᨠáĨáá°áá áááĄáĄá¨ááááĨ á áŖáą á¨ááŖáá á á°ááĢአáá áááĄáĄá°ááĢአáááŖáŗáá áááá¨á áĩ ááĨáĢááŗááą áá á áá á¨á°ááá áá á¨áááŖáŗ áááá¨áĩ á áŖáĩ á¨áá¨áá áááááĄáĄá áááĢáŊá áá áĨá¨á°áᥠááĩáĢáĩ áá°ááĢአááĨáĩá ááá áááĄáĄáá áááĩ á á°áĒá á¨áá áá ááááĢ áá áĩááá áá á áááŖáá áááĩ á ááŊáááĄáĄá áá áá á¨á°ááá á á¨áááá¨áĩ á áŖáĩ áŖáĒáĢ áá á á¨áá á áá áá á á°áĒá áá ááá¨áĨ ááŊáááĄáĄáá á¨á°áá¨á á áá á¨áááá¨áĩ á áŖáĩ á¨ááŖá áááá á¨áááĄáĄ
*ááá á°ááĢአáá° áááá¨áĩ á áŖáĩ áĨáá˛ááŖ á¨áá°á¨á á áĩááĩá á á ááŖáĄ áá¨áááĨ áĢáá áĩ ááá áááá˛áą áá°ááĢአá¨áá ááĢáááĢ/time extension/ áá áˇá áááĩ á áááá°á á¨ááá ááĨáĨ áááĄáĄááááĢáąá áá°ááĢአá¨áá ááĢáááĢ á°áá áļááĩ á¨áá á¨áááŖáŗ áá ááááĢ áááá á áĨᎠáĩáááĢááá áá áĩáááá¨á áááĄáĄ
*á¨áááĢáŊáá á¨á á ááĨáá á áá á¨ááĩ áá ááá? á¨áááá áááááĩ á ááĩááĨáá á á á áááŊ 1887 áĨáĩᨠ1895 áĩá¨áĩ á¨á°á°ááááĩá ááŗá°áĩ áá ááááĄáĄ
*á ááĩááĨáá á á á áááŊ 1889 áá á°áááŽáŊ á ááá¸á ááááŖáĩ á áá°áá ááá áĨáá°áá áá´áŗáá áĢááá¸á áĨáá°áá ááá á ááĩá á¨áá¸á áĨáá°áá ááá á ááááļ á¨áá¸á áĨáá°áá á¨áá¨áááá á¨ááᎠáá á á áĩááĩáá á ááá¸á áááá°á áĨáá°ááŊá á ááá áĩ ááአá°á°áááááĄáĄáĨáá áá á¨áá áá´áŗá á ááááļ ááá¸á áĩáááĢáĩá¨áĩáá á áŖáĩ á¨áááááĩ á á°áá á¨áááŖáŗ áááá¨áĩ á áŖáĩ/liquidated damage/ á¨áááá¨áĩ áááááĄáĄ
*á¨áááá¨áĩ á áŖáĩ áĩááááĩ áŖá áá á á°áĒá á¨áá áĩáĢ áĨáá˛áá¸áá á¨á áŖáĩ ááááĄáá áááá á ááĨáĩ áĨáá°ááá¨á á¨á/á /á 1890(2) áá°áááááĄáĄáĨáá°ááá á á°áĒá áĒáŗáĢ áŖáá°ááĩá áĩ áĨááŗ á¨áááá¨áĩ á áŖáĩ áááᥠáá¨ááá áĨáá°áááŖ á¨á/á /á 1892(1) áá°áááááĄáĄáĨááá˛á á°ááĢአáááŖáŗáá á áá áą áĢáá áááá á á°áĒáá áá áĨá ááááŗáĩ á áĩáĻ ááá á áá á¸áá°áááĩ ááá á á¨áŖáĩ áĨááĩ ááá á¨á°á¨ááá áĨáá°áá á á°áĒá á áá á¨á°ááá á á¨á áŖáĩ ááááĨ á áá á á°á¨á°á áĩ áĩáááá ááŗáĩ áá á áá á¨á°ááĢአáá áĒáŗáĢ ááá á¨á áĨáá°ááŊá á¨á/á /á 1892(2) áá°áááááĄáĄ
*ááá á¨áááá¨áĩ á áŖáĩ áá á á áŗááŊ ááááĩ á¨ááŊáá áĩ áĨáĩá áĩáááአá¨á/á /á 1893 áá°áááááĄáĄáááá á°ááĢአáá´áŗáá á á¨áá á¨áá¸á áá á˛áá áááĄáĄáá áááĩ á°ááĢአáŖá¨áááá áĩáĢ áá á áŖáĩ á¨ááŖáá áĩ á áááá áááĩ áááĄáĄ
*á áá á¨ááĩ á á˛áĒá áááŖáŗ áĩáĢááŊ áá á¨áá áá°áŗá°áĒáĢ á áááŊ 47(1) áá á°ááĢአáĩáĢáá á áá á¨áá ááááĢ áá áĢáá ááá áááá¨á áĩ ááĨáĢááŗááą áá á¨ááá áá 1/1000 áĨáá°áá¨áá áĨá áááá á á ááá áá á á¨áá áá á¨20% ááĨááĨ áĨáá°áááŊá áá°áááááĄáĄááá áá á á¨áá áá°á¨áááá áĩáĢ áááá˛áą áá¨áááĢ á°áá°ááŦáĩ á á°á áá á¨á áŖáą áá á á¨áá°áá áŖáá°á¨áááá áĩáĢ áá á áá áá á áááĩá¨áĩ áááá áááĩ áááĄáĄ
*á áá¨á¨áģá á¨áááá¨áĩ á áŖáĩ á á ááá á¨áá áĨááŗá¨áá áĨáá°á áŖáĩ á¨ááá áá á á á á áŖáą áĨáá á á¨áá°á á á˛áá á áŽáá áá á¨á á áĩáá áĩ áá á áŖáĩ á áá°áááĄáĄá áŽáá áá ááŠá´áĩáĩ áŗáá á á á°áĒá áá á¨á°á¨á°á ááŗáĩ áá áĨáŠá áá ááááá á¨áááá áĩ á˛áá á¨á áŖáĩ á áááĩ á°ááŗáŗá áŖá áĒ áĢáá á°ááģáááĩ á ááá¨áááĄáĄ á áá°áááá!
@etconp
---------------
âļī¸á ááŖá á á°á(á á áá á¨á á á ááĢáĒ)
====================
*á áŽááĩáĩáĢááŊá áá áá á¨áá á¨áááŖáŗ áĩáĢ á°áĨá á¨á°ááá áá á á˛ááá áĨá áááá áĩááĩááŦáŊá áá°á¨áĩ á áá á á°ááá á á¨áá áá°áĨ á°ááļ áá ááá á¨á°ááĢአáááááĩ áááĄáĄ
*á°ááĢአá¨ááá á¨áááŖáŗ áĩáĢ á áá á á°ááá á á¨áá áá°áĨ á áá áą á°ááļ áĢáá ááá áĨáá°áá á¨áá áá ááááĢ áá/completion date/ á áá áááŖáŗá áĨáĩá¨áá ááá á áĩ áá áĩá¨áĩ ááĨáĢááŗááą áá á°ááĢአá¨áááŖáŗ áááá¨áĩ á áŖáĩ/Liquidated damage/ á¨áááá áááááĩ áááá áŗááĄáĄ
*á áá á á°ááá á á¨áá áá°áĨ á˛áŖá áá áááĩ áá? á ááŗááĩ á á°áĒááŊ/client/ á áááᤠáĨáĨá¨áĩ á áá áá á¨á°ááá á á°ááĢáŠá á á°áĒá ááááŖáŗá áá ááááĢ á¨á°áĩááá áĩá á¨áá áĨááĩ/á¨áá áĨáááá/ ááá á á¨áááá¨á áá á ááĢ áá á¨á°áá¨áá áĩ áá ááᎠáĨáá°áá áá¨áąáŗááĄáĄáá á á¨áŗáĩ áĩá á°áĩ áááĄáĄ
*á áŽááĩáĩáĢááŊá áá áĩá áá á ááŖá á á á°áá á¨áááŖáŗ áá á¨á°á°á¨áá áĩ áá/contract signing date/ áŖááĸááááŊá ááŦáĩ/mobilization period/áŖá¨áŗááĩ ááááĨ/site handover/áŖ á¨áĩáĢ ááááĒáĢ áá/commencement date/ áĨá á¨áĩáĢ áá ááááĢ áá/completion date/ á¨áááĩá áá¨áŗáĩ á¨áááŖáŗ áááá¨áĩ á áŖáĩ/Liquidated damage/ á¨áááá á á ááŖáĄ áááá áá á áááĄáĄ
*á áá°á¨áą á áá á¨á°ááá á á¨áĩáĢ áá¨ááá á¨áá áá°áĨ ááá á á¨áááá¨á á°ááĢአá¨áááŖáŗáá áŗááĩ á¨á á°áĒá á¨á°á¨á¨á á áá áááĄáĄáááá á¨áŗááĩ ááááĨ á áá á¨áĩáĢ ááááĒáĢ áá /commencement date/ á áááá˛áą á¨ááá°á áĨá áá°ááĢአá¨ááááŊááĩ áááááĄáĄ
*áĨááá˛á á¨áá á áááá˛áą á¨ááá°áá á¨áĩáĢ ááááĒáĢ áá ááᎠá áá áá á¨á°ááá á áá ááá áá á¨áĩáĢ áá ááááĢ áá/completion date/ áḠáĨáá°áá áááá áĢáĩáŊáá áááĩ áááĄáĄ
*áĨáá áá ááŗáá á¨áááŖá ááá á áŽááĩáĩáĢááŊá áá áá á¨á°áá°ááá á¨áĩáĢ ááá á¨áá á¨áá ááááĢ áá á áĩááĩá ááá ááá áá áá°á¨á á¨ááŊáá áĩ áĨáĩáá á ááĄáĄ/part work completion/ áááĩ áááĄáĄá¨áá á ááŖá አá¨áá áĨáá°á°áĨáĢáĢá á¨áá°á áááááĄáĄ
*áĩáááá á¨áááŖáŗ áááá¨áĩ á áŖáĩ á¨ááá ááŗá á¨áááŖá á°ááĢአá¨ááá á¨áááŖáŗ áĩáĢ á áá áĩáĢ á¨áá ááááĢ áá /completion date/ áŗáĢá áá á á¨áᨠáĨáá°áá áááĄáĄá¨ááááĨ á áŖáą á¨ááŖáá á á°ááĢአáá áááĄáĄá°ááĢአáááŖáŗáá áááá¨á áĩ ááĨáĢááŗááą áá á áá á¨á°ááá áá á¨áááŖáŗ áááá¨áĩ á áŖáĩ á¨áá¨áá áááááĄáĄá áááĢáŊá áá áĨá¨á°áᥠááĩáĢáĩ áá°ááĢአááĨáĩá ááá áááĄáĄáá áááĩ á á°áĒá á¨áá áá ááááĢ áá áĩááá áá á áááŖáá áááĩ á ááŊáááĄáĄá áá áá á¨á°ááá á á¨áááá¨áĩ á áŖáĩ áŖáĒáĢ áá á á¨áá á áá áá á á°áĒá áá ááá¨áĨ ááŊáááĄáĄáá á¨á°áá¨á á áá á¨áááá¨áĩ á áŖáĩ á¨ááŖá áááá á¨áááĄáĄ
*ááá á°ááĢአáá° áááá¨áĩ á áŖáĩ áĨáá˛ááŖ á¨áá°á¨á á áĩááĩá á á ááŖáĄ áá¨áááĨ áĢáá áĩ ááá áááá˛áą áá°ááĢአá¨áá ááĢáááĢ/time extension/ áá áˇá áááĩ á áááá°á á¨ááá ááĨáĨ áááĄáĄááááĢáąá áá°ááĢአá¨áá ááĢáááĢ á°áá áļááĩ á¨áá á¨áááŖáŗ áá ááááĢ áááá á áĨᎠáĩáááĢááá áá áĩáááá¨á áááĄáĄ
*á¨áááĢáŊáá á¨á á ááĨáá á áá á¨ááĩ áá ááá? á¨áááá áááááĩ á ááĩááĨáá á á á áááŊ 1887 áĨáĩᨠ1895 áĩá¨áĩ á¨á°á°ááááĩá ááŗá°áĩ áá ááááĄáĄ
*á ááĩááĨáá á á á áááŊ 1889 áá á°áááŽáŊ á ááá¸á ááááŖáĩ á áá°áá ááá áĨáá°áá áá´áŗáá áĢááá¸á áĨáá°áá ááá á ááĩá á¨áá¸á áĨáá°áá ááá á ááááļ á¨áá¸á áĨáá°áá á¨áá¨áááá á¨ááᎠáá á á áĩááĩáá á ááá¸á áááá°á áĨáá°ááŊá á ááá áĩ ááአá°á°áááááĄáĄáĨáá áá á¨áá áá´áŗá á ááááļ ááá¸á áĩáááĢáĩá¨áĩáá á áŖáĩ á¨áááááĩ á á°áá á¨áááŖáŗ áááá¨áĩ á áŖáĩ/liquidated damage/ á¨áááá¨áĩ áááááĄáĄ
*á¨áááá¨áĩ á áŖáĩ áĩááááĩ áŖá áá á á°áĒá á¨áá áĩáĢ áĨáá˛áá¸áá á¨á áŖáĩ ááááĄáá áááá á ááĨáĩ áĨáá°ááá¨á á¨á/á /á 1890(2) áá°áááááĄáĄáĨáá°ááá á á°áĒá áĒáŗáĢ áŖáá°ááĩá áĩ áĨááŗ á¨áááá¨áĩ á áŖáĩ áááᥠáá¨ááá áĨáá°áááŖ á¨á/á /á 1892(1) áá°áááááĄáĄáĨááá˛á á°ááĢአáááŖáŗáá á áá áą áĢáá áááá á á°áĒáá áá áĨá ááááŗáĩ á áĩáĻ ááá á áá á¸áá°áááĩ ááá á á¨áŖáĩ áĨááĩ ááá á¨á°á¨ááá áĨáá°áá á á°áĒá á áá á¨á°ááá á á¨á áŖáĩ ááááĨ á áá á á°á¨á°á áĩ áĩáááá ááŗáĩ áá á áá á¨á°ááĢአáá áĒáŗáĢ ááá á¨á áĨáá°ááŊá á¨á/á /á 1892(2) áá°áááááĄáĄ
*ááá á¨áááá¨áĩ á áŖáĩ áá á á áŗááŊ ááááĩ á¨ááŊáá áĩ áĨáĩá áĩáááአá¨á/á /á 1893 áá°áááááĄáĄáááá á°ááĢአáá´áŗáá á á¨áá á¨áá¸á áá á˛áá áááĄáĄáá áááĩ á°ááĢአáŖá¨áááá áĩáĢ áá á áŖáĩ á¨ááŖáá áĩ á áááá áááĩ áááĄáĄ
*á áá á¨ááĩ á á˛áĒá áááŖáŗ áĩáĢááŊ áá á¨áá áá°áŗá°áĒáĢ á áááŊ 47(1) áá á°ááĢአáĩáĢáá á áá á¨áá ááááĢ áá áĢáá ááá áááá¨á áĩ ááĨáĢááŗááą áá á¨ááá áá 1/1000 áĨáá°áá¨áá áĨá áááá á á ááá áá á á¨áá áá á¨20% ááĨááĨ áĨáá°áááŊá áá°áááááĄáĄááá áá á á¨áá áá°á¨áááá áĩáĢ áááá˛áą áá¨áááĢ á°áá°ááŦáĩ á á°á áá á¨á áŖáą áá á á¨áá°áá áŖáá°á¨áááá áĩáĢ áá á áá áá á áááĩá¨áĩ áááá áááĩ áááĄáĄ
*á áá¨á¨áģá á¨áááá¨áĩ á áŖáĩ á á ááá á¨áá áĨááŗá¨áá áĨáá°á áŖáĩ á¨ááá áá á á á á áŖáą áĨáá á á¨áá°á á á˛áá á áŽáá áá á¨á á áĩáá áĩ áá á áŖáĩ á áá°áááĄáĄá áŽáá áá ááŠá´áĩáĩ áŗáá á á á°áĒá áá á¨á°á¨á°á ááŗáĩ áá áĨáŠá áá ááááá á¨áááá áĩ á˛áá á¨á áŖáĩ á áááĩ á°ááŗáŗá áŖá áĒ áĢáá á°ááģáááĩ á ááá¨áááĄáĄ á áá°áááá!
@etconp
đáŖáá áĨáĩᲠáĩá Pile foundation áĩááŊ áĨáá á...
.
âļī¸Pile foundations are the part of a structure used to carry and transfer the load of the structure to the bearing ground located at some depth below ground surface.
*The main components of the foundation are the pile cap and the piles.
*Piles are relatively long and slender members used to transmit foundation loads through soil strata of low bearing capacity to deeper soil or rock having a higher bearing capacity
áĄ
âī¸The purpose of apile foundation
đ to transmit a foundation load to a solid ground
đ to resist vertical ,lateral and uplift load
đ to reduce excessive settlement
áĄ
â When pile foundation is used ??
âĄī¸The soil near the surface does not have sufficient bearing capacity to support the structural loads
âĄī¸The estimate settlement of the soil exceed tolerable limits
âĄī¸Differential settlement due to soil variability is happen
âĄī¸The structural loads consist of lateral loads ,moments & uplift force singly or in combination
áĄ
âŗī¸pile capacity
đ´The ultimate bearing capacity of a pile is the maximum load which it can carry without failure or excessive settlement of the ground
đ´The allowable load on a pile is the load which can be imposed upon it with an adequate margin of safety ,it may be the ultimate load divided by a suitable factor of safety,or the load at which the settlement reaches the allowable value
:
đ žThe bearing capacity of apile depends on:-
đThe method of installation
đpile c-xes such as pile length ,cross section ,and shape
đsoil configuration and short and long-term soil properties.
@etconp
.
âļī¸Pile foundations are the part of a structure used to carry and transfer the load of the structure to the bearing ground located at some depth below ground surface.
*The main components of the foundation are the pile cap and the piles.
*Piles are relatively long and slender members used to transmit foundation loads through soil strata of low bearing capacity to deeper soil or rock having a higher bearing capacity
áĄ
âī¸The purpose of apile foundation
đ to transmit a foundation load to a solid ground
đ to resist vertical ,lateral and uplift load
đ to reduce excessive settlement
áĄ
â When pile foundation is used ??
âĄī¸The soil near the surface does not have sufficient bearing capacity to support the structural loads
âĄī¸The estimate settlement of the soil exceed tolerable limits
âĄī¸Differential settlement due to soil variability is happen
âĄī¸The structural loads consist of lateral loads ,moments & uplift force singly or in combination
áĄ
âŗī¸pile capacity
đ´The ultimate bearing capacity of a pile is the maximum load which it can carry without failure or excessive settlement of the ground
đ´The allowable load on a pile is the load which can be imposed upon it with an adequate margin of safety ,it may be the ultimate load divided by a suitable factor of safety,or the load at which the settlement reaches the allowable value
:
đ žThe bearing capacity of apile depends on:-
đThe method of installation
đpile c-xes such as pile length ,cross section ,and shape
đsoil configuration and short and long-term soil properties.
@etconp
đáá
á ááĩá á¨ááĩááá¨áąáĩ á áĩáá áŗááĢáŗ áááĸáᤠá¨á°á°á á¤á°áááĩá˛áĢá ááááĩ 130 á ááŗáĩ á áá á áááŖáŗ áá áááááĸ
âļī¸áĨáĩáĢáá áĢáá°á ááá á˛áá á áá¨áááš 2026 áá áááá á°áĨá áá á áááĸ
đá¨130 áááŗáĩ á áá á¨áááŖáŗ áá°áĩ áĢáááá á¤á°áááĩá˛áĢá ááá¨áĩ á ááĢáļáŊ ááá°áááĸ
.
âļī¸ááĨ ááŊáĩ á°áááđ
âļī¸áĨáĩáĢáá áĢáá°á ááá á˛áá á áá¨áááš 2026 áá áááá á°áĨá áá á áááĸ
đá¨130 áááŗáĩ á áá á¨áááŖáŗ áá°áĩ áĢáááá á¤á°áááĩá˛áĢá ááá¨áĩ á ááĢáļáŊ ááá°áááĸ
.
âļī¸ááĨ ááŊáĩ á°áááđ
Columns are designed for minimum eccentricity
A. 10mm
B. 20mm
C. 40mm
D. All
Use discussion group and we justify the reason
A. 10mm
B. 20mm
C. 40mm
D. All
Use discussion group and we justify the reason