👉Finishing Materials

💫PART ONE

🚧Finishing materials in building construction are applied to surfaces to provide protection, durability, and aesthetic appeal.

⏺They are broadly categorized based on the surface they cover: walls, floors, or ceilings, and whether they are for the interior or exterior.

🎨 Wall Finishes

⏺Wall finishes cover and protect the structural elements, often serving as the primary decorative element.
* Plastering and Rendering: These are "wet" finishes applied in a plastic state.
* Plaster (Cement, Lime, Gypsum): Used primarily on interior walls and ceilings to create a smooth, level surface. Gypsum plaster is popular for dry interiors, while cement and lime plasters offer higher durability and moisture resistance, often used as a base coat.
* Stucco/Rendering: A durable, decorative, and weather-resistant finish (made of cement, lime, and sand) used mainly on the exterior of buildings.
* Pointing: The process of finishing the joints in masonry (brick or stone work) to protect them from weather and enhance the aesthetic of the laid pattern.
* Painting and Coatings: Applied to almost any surface (plaster, wood, metal) for protection and color.
* Paints: Available in various types like emulsions (common for walls), enamels (durable, high-gloss for woodwork/metal), and specialty coatings to protect surfaces from weathering, corrosion, and decay.
* Varnishes: Transparent or semi-transparent liquid coatings for wood surfaces, designed to highlight the natural grain while providing protection.
* Cladding and Coverings: Materials applied in layers for aesthetic or functional purposes.
* Tiles (Ceramic, Porcelain, Glass): Highly durable, non-porous, and water-resistant. They are used extensively in wet areas like kitchens and bathrooms, and for decorative exterior facades.
* Natural Stone Veneer: Thin cuts of materials like marble, granite, or slate applied to walls. This offers a high-end, extremely durable, and natural look, especially popular for exterior accents.
* Wood Paneling/Siding: Boards or engineered wood sheets used to cover walls. Wood siding is a classic exterior finish, while paneling is often used indoors for a warm, natural feature wall.
* Gypsum Board (Drywall): The standard for interior walls and ceilings. It provides a smooth, continuous surface that is ready to be painted or covered with wallpaper.

👣 Floor Finishes

⏺Floor finishes are selected for their durability, maintenance, and aesthetic contribution to a space.
* Hard Finishes:
* Tiles (Ceramic, Porcelain, Quarry): The most common hard floor finish, valued for their durability, easy cleaning, and resistance to water.
* Natural Stone: Materials like granite, marble, and slate are cut into tiles or slabs. They are highly durable, often polished for a reflective, luxurious look, and suitable for high-traffic areas.
* Terrazzo: A composite flooring material created by mixing marble, quartz, or glass chips with a binder (cement or epoxy), which is then ground and polished to a smooth finish.
* Polished/Treated Concrete: Offers a modern, minimalist, and extremely durable surface, often stained or sealed.
* Wood Finishes:
* Hardwood: Traditional solid wood planks that can be sanded and refinished multiple times over the building's lifespan.
* Engineered Wood: More stable than solid wood, consisting of a thin layer of real wood veneer over a plywood or fiberboard core.
* Resilient and Soft Finishes:
* Vinyl (LVT/LVP, Sheet): Highly water-resistant, low-maintenance, and economical, making it ideal for utility and commercial spaces.
* Carpet: Provides excellent underfoot comfort, warmth, and sound absorption, commonly used in bedrooms and living spaces.

To Be Continued ...

@etconp

👉አዳዲስ የሚመሰረቱ ከተሞች ደረጃቸውን በጠበቀ መልኩ ፕላንና ዲዛይን እንዲገነቡ እየተደረገ መሆኑ ተገለጸ

አዳዲስ የሚመሰረቱ ከተሞች የከተማ ስታንዳርድን ወይም ደረጃን በጠበቀ ፕላንና ዲዛይን መሠረት እንዲገነቡ እየተደረገ መሆኑን የከተማና መሰረተ ልማት ሚኒስቴር አስታውቋል።

አጠቃላይ በኢትዮጵያ ውስጥ 2 ሺሕ 543 ከተሞች መኖራቸውን የገለጹት፤ የሚኒስቴሩ ሚኒስትር ዲኤታ አቶ ፈንታ ደጀን ናቸው።

ከእነዚህም ውስጥ የከተማን ደረጃ የሚያሟሉት 275 ብቻ መሆናቸውን የገለጹ ሲሆን፤ ከ2 ሺሕ በላይ የሚሆኑት ደግሞ የማዘጋጃ ቤት ደረጃ ያላቸው መሆኑን ተናግረዋል።

ከዚህ ውጪ አዲስ አበባን ጨምሮ የክልል ዋና ዋና ከተሞች ላይ ደግሞ፤ ዓለም አቀፍ ደረጃን ጭምር እንዲያሟሉ በማድረግ እየተሰራ መሆኑን ገልጸዋል።

ከዚህ በተጨማሪ የተሰሩ ከተሞችን ከማሻሻልና ከማደስ ባሻገር አዳዲስ ከተሞች ገና ሲቆረቆሩ የከተማ ስታንዳርድን ወይም ደረጃን በጠበቀ ፕላንና ዲዛይን መሰረት እንዲሰሩ የማድረግ ሥራ መጀመሩን ሚንስትር ዴኤታው አስታውቀዋል።

አዳዲስ የሚመሰረቱ ከተሞች ደረጃቸውን በጠበቀ መልኩ ፕላንና ዲዛይን እንዲገነቡ እየተደረገ መሆኑንም ተናግረዋል፡፡

በዚህም መሠረት የመኖሪያ ቤት አካባቢን፣ የአስተዳደር፣ የገበያ፣ የመናኸሪያ እና የመዝናኛ ቦታ የሚሉትን እንዲሁም አጠቃላይ ደረጃውን የጠበቀ የከተማ ፕላን እንዲኖረው አስቀድሞ ልየታ እንደሚደረግ አብራርተዋል።
                                
የኢትዮጵያ ከተሞች ደረጃቸውን የጠበቁ እንዲሆን ለማስቻል የመሰረተ ልማት እና ልዩ ልዩ አገልግሎቶችን የማሟላት ሥራም በስፋት እንደሚሰራበት አመላክተዋል።

Via አሐዱ ሬዲዮ

@etconp

👉ኢትዮጵያ ዓለም አቀፍ ደረጃውን የጠበቀ የህፃናት ሙዚየም ልትገነባ ነው።

💫ኢትዮጵያ ለመጀመሪያ ጊዜ ዓለም አቀፍ ደረጃውን የጠበቀ የህፃናት ሙዚየም ልትገነባ መሆኑን የቱሪዝም ሚኒስቴር ሚኒስትር ዲኤታ አቶ ስለሺህ ግርማ አስታወቁ። ፡

ሚኒስትር ዴኤታው አቶ ስለሺህ ግርማ ለጋዜጣ ፕላስ እንደገለጹት በአዲስ አበባ ከተማ ዓለም አቀፍ ደረጃውን የጠበቀ የህፃናት ሙዚያም ለመገንባት የሚያስችሉ እንቅስቃዎች ተጀምረዋል፡፡

በተለያዩ የዓለም ክፍሎች የህጻናት (የልጆች) ሙዚየም ተከፍተው ይጎበኛሉ ያሉት አቶ ስለሺህ ህጻናትን ስለአገራቸው እንዲያውቁና በትምህርት ቤት የሚማሯቸውን በሙዚየሙ የሚመለከቱበትን ዕድል ይፈጥራል ብለዋል፡፡

ከቼክ ሪፐብሊክ መንግስት ጋር በመቀናጀት የህጻናት ሙዚየም ለመገንባት የዲዛይን ሥራ እየተከናወነ መሆኑን ጠቅሰው በቅርቡ ለመጀመሪያ ጊዜ እንደአገር የህጻናት ሙዚየም እንደሚገነባ ገልጸዋል፡፡

ሙዚየሙን በወዳጅነት ፓርክ አካባቢ ለመገንባታ ታቅዷል። አስፈላጊው የዝግጅት ሥራ መጠናቀቁንም ጠቁመዋል፡፡

ህጻናት ስለሳይንስ ፣ ማህበራዊ ህይወት ፣ ጂኦግራፊፈ፣ ታሪክ እና ባህል እውቀት የሚቀስሙበት እንደሚሆን የገለጹት አቶ ስለሺህ፣ ተማሪዎች በንድፈ ሀሳብ የተማሩትን በተግባር የሚያዩበትን እድል ይፈጥራል ብለዋል፡፡

ሙዚየሙ ህጻናት ስለአገራቸው የሚማሩባቸው አምሳያዎችን ጨምሮ ፣ መዝናኛና መመገቢያ ቦታዎች እንደሚኖሩት በመግለጽ ፣ ህጻናቱ እየነኩና እያዩ የሚማሩበት በመሆኑ ዓለም አቀፍ ደረጃውን የጠበቀ እንደሚሆን አስረድተዋል፡፡

የግንባታ ሥራው አጠቃላይ ሁኔታ በኢትዮጵያና በቼክ ሪፐብሊክ መንግሥት በጋራ ቅንጅት እንደሚከናወን ጠቅሰው፣ ግንባታውን ለማስጀመር መሰረታዊ የሆነ የቅድመ ዝግጅት ሥራ መጠናቀቁንና ፕሮጀክቱ መጽደቁን ተናግረዋል፡፡

ዘገባው የጋዜጣ ፕላስ ነው።

@etconp

👉 INTERCON Construction Chemicals 

● Concrete Admixtures
● Bonding Agents
● Waterproofings
● Wall Putty, Prime Coat
● Concrete Repair Mortar
● Floor hardener, Epoxy
● Grout, Self-level mortar
● Quartz paint, Contextra
● Tile Adhesive & Tile Joint Fillers 
● Geotextiles and other construction chemicals and materials

☎️ Tel: 0961955555

🔹 Address 1: Signal road, around
Dinberwa Hospital

🔹 Addres 2: Wellosefer, Infront of
Dani Plaza

👉joints are the intentional separations or gaps placed between materials or structural elements to allow movement, prevent cracks, or simplify construction.

🏷Here are the main types of joints in construction with clear explanations:

🚧1. Construction Joints

⏺These are joints provided when concrete placing is stopped and continued later.
⏺They separate different concreting stages.
⏺Used in large slabs, beams, or walls that cannot be concreted in one go.
⏺They provide a bond between old and new concrete.

❇️Example: Between two slab pours done on different days.

🚧2. Expansion Joints

⏺These joints allow expansion and contraction due to temperature changes.
⏺They prevent cracks caused by thermal movement.
⏺A flexible material (like rubber or bitumen) is placed inside the joint.

❇️Example: Found in bridges, long pavements, or concrete roads.

🚧3. Contraction (Control) Joints

⏺These are provided to control shrinkage cracks when concrete dries and shrinks.
⏺A groove or cut is made on the surface to guide the crack formation along the joint.

❇️Example: In concrete floors, pavements, and slabs.

🚧4. Isolation Joints

⏺These joints separate structural elements so that one part can move independently of another.
⏺Used where a slab meets a wall, column, or footing to prevent stress transfer.

❇️Example: Between building columns and floor slabs.

🚧5. Movement Joints

⏺A general term that includes expansion, contraction, and isolation joints.
⏺They accommodate any type of movement—thermal, structural, or settlement.

🚧6. Slip Joints

⏺Used to allow movement between two parts without bonding.
⏺Typically used in walls or slabs connected to columns to prevent cracking due to differential movement.

🚧7. Butt Joints

⏺A simple joint where two components are placed end-to-end or edge-to-edge.
Common in masonry, steel, and timber construction.

🚧8. Dowel Joints

⏺These use dowel bars (short steel rods) to transfer load between adjacent concrete slabs while allowing movement.
Often found in pavements and floor slabs.

@etconp

👉Type of bar used in reinforced concrete construction:

🚧1. Main Bar

⏺The main bar (also called longitudinal bar) is the primary reinforcement placed in beams, slabs, or columns to resist tensile stresses that occur due to bending.

⏺It carries the main load.
In beams, it is placed at the bottom (tension zone) and sometimes at the top near supports.

⏺In slabs, it runs in the direction of the main span (the longer direction).

🚧2. Top Bar

⏺The top bar is the reinforcement placed at the top portion of a beam or slab.

⏺It mainly resists negative bending moments that occur over supports.

⏺In cantilever beams, the top bar is the main tension bar, because the top side of the cantilever is in tension.

🚧3. Distribution Bar

⏺The distribution bar is placed perpendicular to the main bar in a slab.

⏺Its main purpose is to distribute the load evenly and control shrinkage and temperature cracks.

⏺It helps maintain the correct spacing and supports the main bars in position.

🚧4. Negative Bar

⏺The negative bar is a type of main reinforcement placed where bending moment is negative, such as over supports in continuous beams or slabs.

💫In those regions, the top fibers are in tension, so negative bars are provided at the top side to resist that tension.

🏷In short:

⏺Main bar:- carries main tension.
⏺Top bar:- at top, resists negative moments.
⏺Distribution bar:- spreads load and controls cracking.
⏺Negative bar:-top reinforcement over supports to handle negative bending.

@etconp

ADVERTISMENT

ታምራት ፕሌት እና ጄ ቦልት አቅራቢ

✅የምንሰጣቸው አገልግሎቶች

🔅 ፕሌት any Size & thickness
🔅 ጄ ቦልት (ጥርስ ማዉጣትና ማጠፍ)

🔅 የተለያዩ  [modefic] ስራዎችን እንሰራለን።

♦️ ማንኛዉንም ብረታ ብረት እንገዛለን።

☎️ስልክ 0904040477 ወይም 0911016833 ደውለው ያግኙን
📱ቴሌግራም ላይ ፦https://t.me/heavenic1

አድራሻ፦  ቁ 1.መርካቶ
                ቁ.2 አየር ጤና  ኪዳነ ምህረት

ጥራትና ታማኝነት መለያችን ነው።
ታምራት ፕሌት እና ጄ ቦልት አቅራቢ

👉The purpose of masonry work in building construction is to create strong, durable, and stable structures using materials like bricks, concrete blocks, or stones that are bonded together with mortar. Below are the main purposes explained clearly:

🧱 1. Load Bearing (Structural Strength)

⏺Masonry work is used to carry and transfer loads from the roof, floors, and beams safely down to the foundation. In load-bearing structures, the walls themselves support the building’s weight.

🏠 2. Enclosure and Partition

⏺Masonry forms the outer and inner walls of a building.
Outer walls protect against weather, wind, and temperature.
Inner walls (partition walls) divide the space into rooms and provide privacy.

🔥 3. Fire Resistance

⏺Masonry materials such as brick, stone, and concrete are non-combustible, offering excellent fire protection compared to wooden structures.

🌡️ 4. Thermal and Sound Insulation

⏺Masonry provides good insulation against heat, cold, and noise, helping maintain comfortable indoor conditions and reducing energy use.

💧 5. Weather and Moisture Resistance

⏺Masonry walls protect the interior from rain, humidity, and wind. Properly finished masonry can prevent water penetration and weather damage.

🧍 6. Aesthetic Appearance

⏺Brick or stone masonry gives the building a beautiful and solid appearance, enhancing both architectural style and property value.

⚙️ 7. Durability and Longevity

⏺Masonry construction is long-lasting and requires low maintenance, making it ideal for permanent buildings and structures.

🧩 8. Structural Stability and Safety

⏺Masonry adds rigidity and stability to the structure, resisting external forces like wind, earthquakes, and impact loads when properly reinforced.

@etconp

👉Ultimate bearing capacity means the maximum load per unit area that the soil can support before it fails or collapses.

📜In simple terms:

💫It is the highest pressure the ground can take from the foundation without the soil shearing or giving way.

💡 Example:

⏺If a foundation rests on soil, and we keep increasing the load on it, the soil will deform slightly at first. But after a certain point, it will fail — the foundation will start to sink or tilt.

⏺That maximum safe pressure just before failure = Ultimate bearing capacity.

📘 Formula (general form):

qu = c * Nc + q * Nq + 0.5 * γ * B * Nγ

= ultimate bearing capacity
= cohesion of soil
= overburden pressure at foundation level
= unit weight of soil
= width of foundation
= bearing capacity factors (depend on soil friction angle)

🧱 In practice:

⏺We don’t use the ultimate value directly.

⏺We divide it by a factor of safety (usually 2.5–3) to get the safe bearing capacity, which ensures no failure happens.

🚧 qsafe = qu / F.S.

🏷In short:

➡ Ultimate bearing capacity = maximum load soil can carry before failure.
➡ Safe bearing capacity = load we can safely apply in design.

@etconp

👉Short History of Karl Terzaghi – The Father of Soil Mechanics❤

Karl Terzaghi (1883–1963) was an Austrian civil engineer and geologist who is widely known as the “Father of Soil Mechanics.”

He was the first to develop a scientific understanding of how soil behaves under different conditions, especially under loads.

In the early 1900s, engineers designed foundations based only on experience, without real understanding of soil behavior. Terzaghi changed this by combining engineering, geology, and physics.

In 1925, he published his famous book “Erdbaumechanik auf bodenphysikalischer Grundlage” (Soil Mechanics Based on the Physics of Soils), which laid the foundation of modern soil mechanics.

He introduced key theories such as effective stress, consolidation, and bearing capacity of soils, which are still used today.

He taught at several universities, including Harvard University, and influenced generations of geotechnical engineers worldwide.

📜In summary

💫Karl Terzaghi (1883–1963) – Austrian engineer and geologist, known as the Father of Soil Mechanics, founded the modern science of soil behavior through his 1925 work and theories like effective stress and consolidation.

@etconp