#ADVERTISEMENT

የSEO እና Google Business Profile ማስተዋወቂያ መግለጫ – ለConstruction ድርጅቶች

የግንባታ ኩባንያዎ Google ላይ ይታያል፣ ይታመናል፣ ይመረጣል! በተጠናከረ የSEO ብቃት እና በተቀናጀ የGoogle Business Profile አስተካክለን ኩባንያዎን በConstruction ገበያ ውስጥ ማየት የሚችሉት ደንበኞች ቁጥር በእጅግ ይጨምራል።

⭐ የSEO (Search Engine Optimization) ጥቅሞች
• ኩባንያዎ በGoogle መመሪያ ገፅ ላይ በመጀመሪያ ላይ እንዲታይ ያግዛል
• “Construction company in Addis Ababa” ያሉ ቁልፍ ቃላት ላይ ውስጥ ይመደባል
• የደንበኞች እይታ እና የትዕዛዝ መጥራት ይጨምራል

⭐ የGoogle Business Profile (GBP) ጥቅሞች
• ኩባንያዎ በGoogle Maps እና በGoogle Search ውስጥ በቀላሉ ይታያል
• ስልክ ቁጥር፣ አድራሻ፣ የስራ ሰዓት፣ ፎቶዎች እና አገልግሎቶች በሙሉ እንዲታዩ ያደርጋል
• ደንበኞች በቀጥታ ለመደወል፣ መልዕክት መላክ ይችላሉ
• በስራዎ ላይ የተሰጡ ግምገማዎች እና ኮመንቶች ያሳያል
• የተሻለ የአካባቢ ገበያ (Local SEO) ትርፍ ያመጣል

ይሄንን ሁሉ
በ 2,000 ብር ብቻ 🔥

@BemiCreatives

0902397727

How many times can we use Plywood formwork:

The number of times you can reuse wooden plywood formwork for slab depends mainly on:

I. Quality of plywood:

1.Ordinary commercial plywood 2–3 times (because it absorbs water, swells, and weakens quickly).

2.Shuttering plywood (film-faced, waterproof, WBP grade) → 6–10 times with good care.

3.High-quality phenolic film-faced plywood→ 15–25 times or more.

II. Handling & storage:

If edges are damaged during striking → reuse reduces.

If stored in dry, shaded place after use → reuse increases.

Applying form oil / release agent before concreting prevents sticking and extends life.

III. Workmanship:

Careful nailing and removal reduces breakage.

Cutting into smaller pieces for adjustments reduces future usability.

👉 In practice, on site conditions (normal quality + average care), you can expect:

Ordinary plywood: 3–4 repetitions.

Film-faced shuttering plywood: 8–12 repetitions.

Premium imported shuttering plywood: up to 20+ repetitions.

@etconp

👉 INTERCON Construction Chemicals 

● Concrete Admixtures
● Bonding Agents
● Waterproofings
● Wall Putty, Prime Coat
● Concrete Repair Mortar
● Floor hardener, Epoxy
● Grout, Self-level mortar
● Quartz paint, Contextra
● Tile Adhesive & Tile Joint Fillers 
● Geotextiles and other construction chemicals and materials

☎️ Tel: 0961955555

🔹 Address 1: Signal road, around
      Dinberwa Hospital

🔹 Addres 2: Wellosefer, Infront of
     Dani Plaza

👉Types of Septic Tanks

🏷1. Conventional (Single-Chamber) Septic Tank

⏺One chamber only.
⏺Wastewater settles → sludge at bottom, scum floats.
⏺Suitable for small houses.

🏷2. Two-Chamber / Three-Chamber Septic Tank

⭐️Most common type.

⏺First chamber: solids settle.
⏺Second/third chamber: further treatment and overflow to soak pit.
⏺Better performance and less clogging.

🏷3. RCC Septic Tank (Reinforced Cement Concrete)

⏺Constructed with RCC walls and slab.
⏺Very strong and durable.
⏺Suitable for permanent buildings.

🏷4. Brick Masonry Septic Tank

⏺Constructed with burnt bricks and plaster.
⏺More economical but less durable than RCC.

🏷5. FRP / PVC / Polyethylene Septic Tank (Prefabricated)

⏺Factory-made tanks.
⏺Lightweight, quick to install, leakproof.
⏺Ideal for small plots or temporary structures.

🏷6. Biodigester / Bio-Septic Tank

⏺Uses bacteria to convert waste into water + gas.
⏺Almost no sludge cleaning required.
⏺Eco-friendly and suitable for areas without drainage.

🏷7. Aerobic Septic Tank (Aeration-Based)

⏺Uses air pumps and aerators.
⏺Faster treatment, cleaner effluent.
⏺Higher cost and requires electricity.

🏷8. Soak Pit / Leach Pit (Used With Septic Tank)

⏺Not a septic tank itself but connected to it.
⏺Helps in groundwater infiltration.

⚡️Related Hashtag:

#SepticTank #TypesOfSepticTank #fblifestyle #RCCSepticTank #BrickMasonrySepticTank #BioSepticTank #Biodigester #FRPSepticTank #PVCSepticTank #PolyTankSeptic #SewageTreatment #DomesticWastewater #OnSiteSanitation #CivilEngineering

@etcono

የህንፃዎች የቀለም ኮድ በስታንዳርዱ መሠረት እየተተገበረ እንደሆነ ተገለፀ

በኮሪደር ልማት መንገዶች ላይ የሚገኙ በስታንዳርዱ መሠረት ቀለም የቀቡ ÷አጥር ያጠሩ÷ መብራቶች የሰቀሉ ነዋሪዎች በአጠቃላይ 11.3 ቢሊየን ብር በላይ ወጪ እንዳደረጉ ሰምተናል።

የህንፃዎች የቀለም ኮድ ስታንዳርድ ከማስጠበቅ ጋር በተያያዘ የአዲስ አበባ ከተማ አስተዳደር የግንባታ ፍቃድ እና ቁጥጥር ባለስልጣን እየሰራሁ እገኛለሁ ብሏል።

የባለስልጣን መስሪያ ቤቱ ዋና ዳይሬክተር ህይወት ሳሙኤል የግንባታ ፍቃድ እና ቁጥጥር ባለስልጣን የህንፃዎችን የቀለም ኮዶች ስታንዳርድ ማዘጋጀቱን ነግረዉናል።

የህንፃ ባለቤቶች ህንፃዎችን ቀለም ለመቀባት ይህንን ስታንዳርድ ከባለስልጣን መስሪያ ቤቱ የሚሰጣቸዉ ብቻ መሆኑንም ዳይሬክተሯ አያይዘዉ ገልፀዋል።

ለከተማዋ የሚስማሙ 13 አይነት ቀለማት መለየታቸዉ ከዚህ ቀደም ተነግሯል።

ይህም ግንባታው ተጠናቆ አገልግሎት በመስጠት ላይ የሚገኝ ህንጻ ከተማ አስተዳደሩ በሚያወጣው የአፈጻጸም እርከን አቅጣጫ የቀለም ዲዛይኑን የሚተገብር ይሆናል።

ኮሪደር ልማት ባለፈባቸዉ አካባቢዎች ያሉ ግራ እና ቀኝ ቤቶች እድሳት የተደረገባቸዉ እና በስታንዳርዱ መሠረት ቀለም የተቀቡ መሆኑን የባለስልጣኑ ዳይሬክተር ተናግረዋል።

እስካሁን ባለዉ መረጃ በኮሪደር መንገዶች ላይ የሚገኙ ነዋሪዎች በስታንዳርዱ መሠረት ቀለም የቀቡ ÷አጥር ያጠሩ÷ መብራቶች የሰቀሉ ነዋሪዎች በአጠቃላይ 11.3 ቢሊየን ብር በላይ ወጪ ያደረጉ መሆኑን ሰምተናል።

ከተማዋ በህንጻዎች የራሷ የሆነ ስታንዳርድ እና በቀለም የሚገለጽ ብራንድ እንዲኖራት የአረንረጓዴ ልማት የአርባን ዲዛይን ቅርጽ ይዞ እንዲለማ ማድረግ እንደሚኖርበት ባለስልጣኑ በመመሪያው አስቀምጧል።

@etconp

👉Common Issue In Fresh Concrete:

📌1. Segregation: This occurs when the coarse aggregate separates from the finer particles, leading to uneven distribution of materials. It can weaken the concrete and affect its overall strength and durability.

📌2. Bleeding: Bleeding is the phenomenon where water rises to the surface of freshly placed concrete due to gravitational forces. This can lead to a weaker surface layer and potential issues with bonding for subsequent layers or finishes.

📌3. Honeycombing: Honeycombing refers to voids or air pockets left in the concrete due to inadequate compaction or improper placement techniques. These voids can compromise the structural integrity and durability of the concrete.

📌4. Plastic Shrinkage: This occurs when fresh concrete shrinks as it loses moisture before it sets, leading to cracks on the surface. It is often exacerbated by high temperatures, low humidity, or wind conditions.

📌5. Setting Time Delay: Factors such as low temperatures or high moisture can delay the setting time of concrete, causing scheduling issues in construction. Delayed setting can also affect the planned sequence of work and lead to quality concerns.

📌6. Rapid Stiffening: This happens when concrete stiffens too quickly due to high temperatures or certain admixtures, making it difficult to work with. It can lead to poor finishing and increased risk of defects in the final product.

📌7. Cold Joint: A cold joint occurs when there is a delay in pouring subsequent layers of concrete, causing a lack of bonding between them. This can weaken the structure and create pathways for water infiltration.

📌8. Over Vibrating: Excessive vibration during consolidation can lead to segregation and loss of workability in fresh concrete. It can also cause excessive bleeding and surface defects, compromising the quality of the finished product.

📌9. Plastic Settlement: Plastic settlement occurs when fresh concrete settles unevenly due to gravitational forces, often resulting in surface cracking. It is commonly influenced by factors such as mix design, aggregate size, and placement technique.

@etconp

👉ኒው ዮርክ ስጋት ውስጥ ነች

💫ሳይንቲስቶች እንደገለጹት፣ ኒው ዮርክ ከተማ በሰማይ ጠቀስ ህንፃዎቿ ከፍተኛ ክብደት ምክንያት በየዓመቱ ወደ 2 ሚሊ ሜትር ያህል ወደ መሬት እየሰጠመች ነው፤

🚧በሚሊዮን የሚቆጠሩ ቶን የሚመዝኑ ህንፃዎች መሬቱን በመጫናቸው፣ በከተማዋ የተለያዩ ክፍሎች ላይ ቀስ በቀስ የሚከሰት ነገር ግን ቋሚ የሆነ የመሬት መርገብ (ወደ ታች የመሄድ ሂደት) እያስከተለ ነው፤

🏷ይህ ለውጥ አዝጋሚ ቢሆንም፣ ከባህር ወለል ከፍ ማለት እና ከባህር ዳርቻዎች መጥለቅለቅ ጋር ተያይዞ እያደገ ላለው ስጋት ተጨማሪ ምክንያት ሆኗል፤

⏺ጉዳዩ በከተማ እድገት እና በአካባቢ ጥበቃ ገደቦች መካከል ያለውን ጥንቃቄ የሚሻ ሚዛን አጉልቶ ያሳያል። የከተማ ፕላነሮች እና መሐንዲሶች፣ የከተማዋ መለያ የሆኑት ረጃጅም ህንፃዎች የከተማዋን የረጅም ጊዜ ተጋላጭነት እንዳይጨምሩ በማድረግ የኒው ዮርክን ቀጣይ ህልውና እንዴት መጠበቅ እንደሚቻል እያጠኑ ነው።

https://t.me/ETCONpWORK

@etconp

👉Punching reinforcement bar in flat slab:

💫Is reffering to extra reinforcement provided around columns in a flat slab to resist punching shear failure.

🚧1.What is Punching Shear in Slabs?

⏺In flat slabs (slabs directly supported on columns, without beams), the concentrated load from a column can cause the slab to fail by punching through around the column area.

⏺This type of failure is sudden and brittle → dangerous.

🚧2.Reinforcement Against Punching Shear

⏺To strengthen the slab near columns, civil engineers provide punching reinforcement in addition to normal flexural reinforcement.

Continue...

@etconp

#ADVERTISEMENT

የSEO እና Google Business Profile ማስተዋወቂያ መግለጫ – ለConstruction ድርጅቶች

የግንባታ ኩባንያዎ Google ላይ ይታያል፣ ይታመናል፣ ይመረጣል! በተጠናከረ የSEO ብቃት እና በተቀናጀ የGoogle Business Profile አስተካክለን ኩባንያዎን በConstruction ገበያ ውስጥ ማየት የሚችሉት ደንበኞች ቁጥር በእጅግ ይጨምራል።

⭐ የSEO (Search Engine Optimization) ጥቅሞች
• ኩባንያዎ በGoogle መመሪያ ገፅ ላይ በመጀመሪያ ላይ እንዲታይ ያግዛል
• “Construction company in Addis Ababa” ያሉ ቁልፍ ቃላት ላይ ውስጥ ይመደባል
• የደንበኞች እይታ እና የትዕዛዝ መጥራት ይጨምራል

⭐ የGoogle Business Profile (GBP) ጥቅሞች
• ኩባንያዎ በGoogle Maps እና በGoogle Search ውስጥ በቀላሉ ይታያል
• ስልክ ቁጥር፣ አድራሻ፣ የስራ ሰዓት፣ ፎቶዎች እና አገልግሎቶች በሙሉ እንዲታዩ ያደርጋል
• ደንበኞች በቀጥታ ለመደወል፣ መልዕክት መላክ ይችላሉ
• በስራዎ ላይ የተሰጡ ግምገማዎች እና ኮመንቶች ያሳያል
• የተሻለ የአካባቢ ገበያ (Local SEO) ትርፍ ያመጣል

ይሄንን ሁሉ
በ 2,000 ብር ብቻ 🔥

@BemiCreatives

0902397727

ADVERTISMENT

ታምራት ፕሌት እና ጄ ቦልት አቅራቢ

✅የምንሰጣቸው አገልግሎቶች

🔅 ፕሌት any Size & thickness
🔅 ጄ ቦልት (ጥርስ ማዉጣትና ማጠፍ)

🔅 የተለያዩ  [modefic] ስራዎችን እንሰራለን።

♦️ ማንኛዉንም ብረታ ብረት እንገዛለን።

☎️ስልክ 0904040477 ወይም 0911016833 ደውለው ያግኙን
📱ቴሌግራም ላይ ፦https://t.me/heavenic1

አድራሻ፦  ቁ 1.መርካቶ
                ቁ.2 አየር ጤና  ኪዳነ ምህረት

ጥራትና ታማኝነት መለያችን ነው።
ታምራት ፕሌት እና ጄ ቦልት አቅራቢ

👉Plain Concrete (PC) vs Reinforced Concrete (RC)

⭐️Plain Concrete (PC):

⏺No steel inside
⏺Strong in compression
⏺Weak in tension (cracks easily)
⏺Used for small works: pavements, simple foundations
⏺Cheap but limited strength

⭐️Reinforced Concrete (RC):

⏺Has steel bars
⏺Strong in both compression & tension
⏺Used for structural members: beams, slabs, columns
⏺More durable and carries heavy loads

@etconp

👉The image illustrates the principles of reinforced and prestressed concrete.

💫It shows how a plain concrete beam bends and cracks under heavy load, and how embedding steel rods enhances its strength.

📌Concrete beams bend and crack under heavy loads because concrete is weak in tension.

📌Reinforced concrete uses embedded steel rods to hold the concrete together and prevent cracking.

📌Prestressed concrete involves stretching the steel rods before the concrete sets, which creates internal compression that makes the beam exceptionally strong and durable.

📌This technique is used in major construction projects, such as the Burj Khalifa.

@etconp

👉difference between a bridge and a culvert

🚧A bridge is a large structure built to allow people, vehicles, or trains to cross over obstacles such as rivers, deep valleys, roads, or railways.

⏺It usually has a span longer than 6 meters and is supported by piers, abutments, or columns.

⏺Bridges are designed to carry heavy loads and provide safe passage over spaces where normal ground cannot support a road.

⏺They are built above the surface, leaving a clear open space underneath.

🏷A culvert, on the other hand, is a small passageway built primarily to allow water to flow beneath a road, railway, or embankment.

⏺Culverts usually have a span less than 6 meters and are generally buried under soil. They are made using concrete pipes, box sections, steel pipes, or stone masonry.

⏺Unlike bridges, culverts do not provide space for people or vehicles underneath; their main purpose is drainage, water management, and preventing erosion or flooding by letting streams or stormwater pass through.

📜In simple terms, a bridge is a major crossing structure built above an obstacle, while a culvert is a small water-carrying structure built within an embankment to let water pass under the road.

@etconp