๐แจแคแฐ แญแญแตแฒแซแ แแแ แฒแแญแ แแญแแแณแ แญแแฑ แ แฅแ แจแแ แจแณแ แจแแแ แ แซแแต แฅแตแจ แจแฐแแซแฉ แญแแแฝแ แจแแแ แ
แญแแฝ แ แแแแ แแแจแณแต แจแฐแแแ แแญแฅ แจแ แแญแ แฎแแตแตแซแญแฝแ แแ
แแ แจแแแ แจแณแฝ แฃแแ แแแญ แซแแญแฑแต๐
https://ye-buna.com/etconp?ref=product_detail&product=6a8a873add2d7_etconp
https://ye-buna.com/etconp?ref=product_detail&product=6a8a873add2d7_etconp
Ye-Buna
แจแคแฐ แญแญแตแฒแซแ แแแ แ แฐแซแญแฆ แจแ แซแแตแฃ แจแญแแแฝแ แจแ
แญแแฝ แแ แแแชแซ
แจแคแฐ แญแญแตแฒแซแ แแแ แ แฐแซแญแฆ แจแ แซแแตแฃ แจแญแแแฝแ แจแ
แญแแฝ แแ แแแชแซ แจแคแฐโฆ 499 ETB ยท โ
4.0 (1 review) ยท 15 sold. Instant download from Ethio Construction Engineering on Ye-Bunaโฆ
โค4๐1
๐HOW MANY ROOF SHEETS DO YOU NEED?๐ ๐
๐Calculating the number of roofing sheets is simple when you consider the actual roof dimensions, roof slope, and sheet overlaps.
๐Hereโs a complete step-by-step example:
๐น Project Data
โข Building Width: 5 m
โข Building Length: 15 m
โข Overhang: 0.40 m
โข Roof Slope: 35% โ 19.3ยฐ
โข Sheet Size: 3.0 m ร 0.90 m
๐น Step 1:
Calculate Actual Roof Dimensions Always include the overhang on both sides:
Total Length = 15 + (2 ร 0.40) = 15.80 m
Total Width = 5 + (2 ร 0.40) = 5.80 m
๐น Step 2:
Calculate Slope Length For a pitched roof:
Slope Length = Width รท (2 ร cos ฮธ)
L = 5.80 รท (2 ร cos 19.3ยฐ)
L = 3.085 m โ 3.09 m
๐น Step 3: Calculate Roof Area
Area of One Roof Slope = 3.09 ร 15.80 = 48.82 mยฒ
Since there are two slopes:
Total Roof Area = 2 ร 48.82 = 97.64 mยฒ
๐น Step 4:
Calculate Usable Area of One Sheet
Sheet overlaps must be considered:
โข Side Overlap = 5 cm
โข End Overlap = 10 cm
Usable Width = 0.90 โ 0.10 = 0.80 m
Usable Length = 3.00 โ 0.10 = 2.90 m
Usable Area = 2.90 ร 0.80 = 2.32 mยฒ
๐น Step 5: Calculate Number of Sheets
Number of Sheets = Total Roof Area รท Usable Area of One Sheet
N = 97.64 รท 2.32 = 42.09
Always round up to the next whole number:
โ Required Roofing Sheets = 43 Sheets
โ ๏ธImportant: In actual construction, sheet quantity should also be checked based on the sheet layout, effective cover width, sheet direction, cutting waste, ridge details, and manufacturer-recommended overlaps.
@etconp
๐Calculating the number of roofing sheets is simple when you consider the actual roof dimensions, roof slope, and sheet overlaps.
๐Hereโs a complete step-by-step example:
๐น Project Data
โข Building Width: 5 m
โข Building Length: 15 m
โข Overhang: 0.40 m
โข Roof Slope: 35% โ 19.3ยฐ
โข Sheet Size: 3.0 m ร 0.90 m
๐น Step 1:
Calculate Actual Roof Dimensions Always include the overhang on both sides:
Total Length = 15 + (2 ร 0.40) = 15.80 m
Total Width = 5 + (2 ร 0.40) = 5.80 m
๐น Step 2:
Calculate Slope Length For a pitched roof:
Slope Length = Width รท (2 ร cos ฮธ)
L = 5.80 รท (2 ร cos 19.3ยฐ)
L = 3.085 m โ 3.09 m
๐น Step 3: Calculate Roof Area
Area of One Roof Slope = 3.09 ร 15.80 = 48.82 mยฒ
Since there are two slopes:
Total Roof Area = 2 ร 48.82 = 97.64 mยฒ
๐น Step 4:
Calculate Usable Area of One Sheet
Sheet overlaps must be considered:
โข Side Overlap = 5 cm
โข End Overlap = 10 cm
Usable Width = 0.90 โ 0.10 = 0.80 m
Usable Length = 3.00 โ 0.10 = 2.90 m
Usable Area = 2.90 ร 0.80 = 2.32 mยฒ
๐น Step 5: Calculate Number of Sheets
Number of Sheets = Total Roof Area รท Usable Area of One Sheet
N = 97.64 รท 2.32 = 42.09
Always round up to the next whole number:
โ Required Roofing Sheets = 43 Sheets
โ ๏ธImportant: In actual construction, sheet quantity should also be checked based on the sheet layout, effective cover width, sheet direction, cutting waste, ridge details, and manufacturer-recommended overlaps.
@etconp
โค8๐5
#Advertisement
๐แขแแแแแแ แแแญ แญแแแแ?
๐แ แฅแแแต Grammar แแแแญ แฅแแฒแแ Scholarship apply แแแจแ แฅแ IELTS แแแแฐแ แฃแ แแแญ แขแแแแแ แแแแ แ แแแ แแแแแต แญแ แ แชแ แแญแฅ แแ แแ แ แแแ แฐแแ แจแณแฝ แฃแแ แแแญ แซแแญแฑแต๐
https://ye-buna.com/matoro27?ref=product_detail&product=6a909035df904_matoro27
โ๏ธ
๐แฅแแแแแแแ แแแปแปแ แแฌแแ แญแแแฉ!
๐แขแแแแแแ แแแญ แญแแแแ?
๐แ แฅแแแต Grammar แแแแญ แฅแแฒแแ Scholarship apply แแแจแ แฅแ IELTS แแแแฐแ แฃแ แแแญ แขแแแแแ แแแแ แ แแแ แแแแแต แญแ แ แชแ แแญแฅ แแ แแ แ แแแ แฐแแ แจแณแฝ แฃแแ แแแญ แซแแญแฑแต๐
https://ye-buna.com/matoro27?ref=product_detail&product=6a909035df904_matoro27
โ๏ธ
๐แฅแแแแแแแ แแแปแปแ แแฌแแ แญแแแฉ!
๐2โค1
๐แฐแแ แแต แคแฐแฐแฆแปแฝแ แฅแแแฝ แ แ แจแแนแ แแฐแจแต แจ ETABS แฒแถแญแซแ แชแตแฎ แ แ แแญแ แแแ แจ introduction แแแฎ Analysis แฅแ Design แฃแซแฐแ แแญแฅ แชแตแฎ แฃแแแ
แฐแแแนแแแข
๐ซตแฅแแ แแฌ แญแแ 4 แญแแแแน แแฅแฐแแ๐
https://youtu.be/iYTyYlebxjU
๐ซตแฅแแ แแฌ แญแแ 4 แญแแแแน แแฅแฐแแ๐
https://youtu.be/iYTyYlebxjU
YouTube
ETABS Full Course 2026 โ Part 4 | แจแแแช แฅแตแจ Advanced | ETABS Tutorial แ แ แแญแ
๐ ETABS Full Course โ Part 4 | Structural Design Tutorial
Continue the complete ETABS course from Beginner to Advanced with this practical, step-by-step tutorial.
In Part 4, we continue the building modeling and structural design workflow, covering importantโฆ
Continue the complete ETABS course from Beginner to Advanced with this practical, step-by-step tutorial.
In Part 4, we continue the building modeling and structural design workflow, covering importantโฆ
๐4โค2
1. In approximate quantities method of preparing approximate estimate, wall foundations are measured in:
Anonymous Quiz
4%
Kilogram
56%
Cubic meter
31%
Square meter
9%
Running meter
๐3๐3
2. In the case of preliminary estimate prepared per unit basis, the service units to be considered for a school and hospital are respectively:
Anonymous Quiz
44%
Classroom and bed
9%
Bench and ward
11%
Bench and bed
36%
Classroom and ward
โค5๐ฅฐ2
3. Which of the following factors is not accounted for in the cost estimation of a reinforced concrete (RC) water tank?
Anonymous Quiz
65%
Density of water
7%
Height of water tank
12%
Thickness of RC slab and wall
16%
Length of water tank
โค3
๐แจ แ
แแ Quantity Surveying แจ Introduction แแแฎ แฝแแณแแ แ แฐแแฃแซแ แแณแแแฝ แจแแซแณแตแแ แต แแญแฅ แแ
แแ แจแณแฝ แฃแแ แแแญ แซแแญแฑแต๐
https://ye-buna.com/etconp?ref=product_detail&product=6a8dd294cbaa9_etconp
https://ye-buna.com/etconp?ref=product_detail&product=6a8dd294cbaa9_etconp
๐1๐1
4. The capacity of doing work by a skilled labour in the form of quantity of work per day is known as:
Anonymous Quiz
30%
Out-turn work
8%
Extra work
57%
Standard work
4%
Lift work
๐4โค1
5. As per IS dimensioning shall be done normally in:
Anonymous Quiz
40%
Millimeters
31%
Meters
13%
Centimeters
15%
Feet and Inches
โค4๐1
6. The nominal lead and lift allowed for the earthwork in the excavations of the foundations are:
Anonymous Quiz
28%
30 m and 1.5 m
28%
20 m and 1.5 m
30%
15 m and 3.0 m
15%
20 m and 3.0 m
๐4โค3
7. The expected out-turn for earthwork in excavation in ordinary soil per workman per day is:
Anonymous Quiz
26%
1.00 cum
29%
2.00 cum
31%
3.00 cum
14%
4.00 cum
โค4๐3
8. Expected out-turn of cement concrete 1:2:4 per mason per day is:
Anonymous Quiz
19%
1.0 mยณ
32%
1.5 mยณ
33%
2.5 mยณ
15%
5.0 mยณ
๐2โค1
9. In steel and iron works, dimensions excepting cross-section and thickness of plate shall be measured to nearest ____ m except for reinforcement in reinforced concrete works.
Anonymous Quiz
35%
0.005
36%
0.001
21%
0.002
7%
0.003
โค5
10. In brickworks, length and height is measured to the nearest:
Anonymous Quiz
45%
1 cm
21%
0.01 cm
20%
0.1 cm
14%
0.5 cm
โค3๐3
๐RCC / Concrete Staircase โ Structural & Dimension Guide
๐ฅAn RCC staircase is designed to provide safe and comfortable access between different floor levels. The main components include treads, risers, stringers/side beams, landings, reinforcement, and supporting footings.
๐Key Dimensions Shown
- Total height: 2.8 m
- Total length: approximately 5.5 m
- Stair width: 0.9 m
- Rise (R): 0.20 m
- Tread (T): 0.20 m
- Number of steps: 14
- Landing: Provided at the intermediate portion
- Base footing: approximately 1.6 m ร 0.9 m as illustrated
Important Components
1. Stringer / Side Beam โ Supports the staircase along its inclined sides.
2. Tread โ The horizontal surface on which the foot rests.
3. Riser โ The vertical portion between two consecutive treads.
4. Landing โ Provides a resting and turning area.
5. Base Footing โ Transfers the staircase/support loads safely to the ground.
Reinforcement & Construction Notes
- The illustration indicates M20 concrete for treads and landing.
- Minimum reinforcement shown is 8 mm diameter bars at 150 mm c/c, subject to structural design.
- Reinforcement detailing should be finalized according to the span, loading, support conditions, and applicable design code.
- Maintain uniform rise and tread dimensions for comfortable movement.
- Proper concrete compaction and curing are essential for strength and durability.
- Provide adequate side support/stringers and proper anchorage at landings and supports.
Staircase Formula
A commonly used comfort relationship is:
2R + T โ 600 mm
For the dimensions shown:
2(200) + 200 = 600 mm
The drawing also shows a 45ยฐ slope calculation, although the stated slope angle elsewhere in the illustration is approximately 37ยฐ. The actual stair slope should be determined from the final verified rise and horizontal going dimensions.
Note: Staircase dimensions and reinforcement must be verified by a qualified structural engineer before construction. The values in this illustration should be treated as an educational reference, not a construction drawing.
@etconp
๐ฅAn RCC staircase is designed to provide safe and comfortable access between different floor levels. The main components include treads, risers, stringers/side beams, landings, reinforcement, and supporting footings.
๐Key Dimensions Shown
- Total height: 2.8 m
- Total length: approximately 5.5 m
- Stair width: 0.9 m
- Rise (R): 0.20 m
- Tread (T): 0.20 m
- Number of steps: 14
- Landing: Provided at the intermediate portion
- Base footing: approximately 1.6 m ร 0.9 m as illustrated
Important Components
1. Stringer / Side Beam โ Supports the staircase along its inclined sides.
2. Tread โ The horizontal surface on which the foot rests.
3. Riser โ The vertical portion between two consecutive treads.
4. Landing โ Provides a resting and turning area.
5. Base Footing โ Transfers the staircase/support loads safely to the ground.
Reinforcement & Construction Notes
- The illustration indicates M20 concrete for treads and landing.
- Minimum reinforcement shown is 8 mm diameter bars at 150 mm c/c, subject to structural design.
- Reinforcement detailing should be finalized according to the span, loading, support conditions, and applicable design code.
- Maintain uniform rise and tread dimensions for comfortable movement.
- Proper concrete compaction and curing are essential for strength and durability.
- Provide adequate side support/stringers and proper anchorage at landings and supports.
Staircase Formula
A commonly used comfort relationship is:
2R + T โ 600 mm
For the dimensions shown:
2(200) + 200 = 600 mm
The drawing also shows a 45ยฐ slope calculation, although the stated slope angle elsewhere in the illustration is approximately 37ยฐ. The actual stair slope should be determined from the final verified rise and horizontal going dimensions.
Note: Staircase dimensions and reinforcement must be verified by a qualified structural engineer before construction. The values in this illustration should be treated as an educational reference, not a construction drawing.
@etconp
โค10๐4๐1
Ethio Construction Engineering
๐แฐแแ แแต แคแฐแฐแฆแปแฝแ แฅแแแฝ แ แ แจแแนแ แแฐแจแต แจ ETABS แฒแถแญแซแ แชแตแฎ แ แ แแญแ แแแ แจ introduction แแแฎ Analysis แฅแ Design แฃแซแฐแ แแญแฅ แชแตแฎ แฃแแแ
แฐแแแนแแแข ๐ซตแฅแแ แแฌ แญแแ 4 แญแแแแน แแฅแฐแแ๐ https://youtu.be/iYTyYlebxjU
YouTube
ETABS Full Course 2026 โ Part 5 | แจแแแช แฅแตแจ Advanced | ETABS Tutorial แ แ แแญแ
๐ ETABS Full Course โ Part 5 | Structural Design Tutorial
Continue the complete ETABS course from Beginner to Advanced with this practical, step-by-step tutorial.
In Part 5, we continue the building modeling and structural design workflow, covering importantโฆ
Continue the complete ETABS course from Beginner to Advanced with this practical, step-by-step tutorial.
In Part 5, we continue the building modeling and structural design workflow, covering importantโฆ
๐2๐ฅ2
๐แแแ แ แแ แจแฎแแตแตแซแญแฝแ แฅแ แจแขแแแแชแแ แดแญแแแ แณแแแณแ แณแฐแณ
โแ แแฌแ แ แแแ แ แแ แฐแจแ แ แแญแ แฅแจแฐแตแฐแแ แซแ แ แณแฒแต แดแญแแแแแฝแแฃ แแแ แแแต แ แฐแซแฎแฝแ แฅแ แจแแ แซ แตแซแแฝแ แฅแแแแแแข
โแ แ แญแดแแปแ แขแแฐแแแแต (AI) แจแณแแ แจแ แแ แฐแ แแแต แญแตแตแ
โแ แณแฒแต แดแญแแแแแฝ แ แแแฃแณ แตแแซแแฝ แแญ แแจแฐแฑ แจแแฝแ แ แฐแแแฝแ แ แตแแตแ แ แแฐแแ แญ แฅแ แจแฐแซแฐแแฝแ แจแฐแ แแแต แแ แ แแซ แฅแแแฝ (PPE) แ แ แแแ แ แซแแซ แ แแจแณแฐแ แจแแณแต แแ แแ แแแแต แจแแซแตแฝแ แฒแตแฐแแฝ แ แตแแต แฅแจแฐแแแ แญแแแแข
โแแ แฐแ แจแซแญแฆแ แแแต แซแแธแ แ แจแแแด แจแแแฃแณ แฅแแแฝ
โแจแ แจแญ แแฅแจแต แแแฅแ แแแแแ แ แแฐแจแแ แฅแจแต แแแ แ แแ แจแฎแแตแตแซแญแฝแ แขแแฑแตแตแชแแฝ แจแฃแ แแ แฒแแแถ แญแแ แ แแญแต แแฐแต แแตแฅ แ แแตแฐแ แซแญแฆแ แจแแซแแแฉ แ แณแฒแต แจแฒแแแถ แ แแซแฎแฝแ แฅแ แฅแแฐแแ แฅแ แ แแญ แแแ แจแแฝแ แจแฅแจแต แแญแถแฝแ แ แแ แแ แแญ แแธแแข
โแจแขแ แญแคแ (BIM - Building Information Modeling) แดแญแแแ
แแตแแต โแจแแฎแแญแถแฝแ แจแแตแแฃ แจแ แแต แฅแ แจแแ แฐแแณ แ แ แแต แฒแแณแ แแตแจแญ แแญ แ แแแ แถ แ แแซแ แจแแแฃแณ แตแ แฐแถแฝแ แฅแ แจแแฅแต แแฃแตแ แ แจแแฐแ แฐแจแ แจแแซแตแแญ แจแถแแตแแญ แ แ แแแ แ แ แแ แ แแ แฐแจแ แฅแแฐ แแแแ แฅแจแฐแแฐแฐ แญแแแแข
โแแฑแแญ แฅแ แแตแแ แฐแฐแแตแฐแ แจแแแ แ (Prefabricated) แคแถแฝ
โแจแฐแแต แฅแ แจแแแ แต แแชแ แแแแแต แฒแฃแ แจแ แแ แ แซแแต แ แแฅแชแซ แแตแฅ แฐแแแ แฐแ แจแแแฃแณ แฆแณ แแญ แ แแแ แจแแแ แแ แต แแแแ แ แฐแซแญ แ แแฃแ แจแฐแแฝ แแตแแแต แแญแแซแต แฐแแซแญ แฅแจแแ แแฅแทแแข
โแแแฌ แซแแแแแธแ แแแ แ แแ แดแญแแแแแฝ แฅแแแ แญแแตแแแค แแณแฅ แฅแ แ แตแฐแซแจแต แฅแแฒแแ แ แแแญ แแตแฅ แซแ แจแแแฃแณ แฅแ แจแขแแแแชแแ แแณแฎแฝแ แ แแซแฐแต แ แฅแจแ แฅแแแซแแแข
@etconp
โแ แแฌแ แ แแแ แ แแ แฐแจแ แ แแญแ แฅแจแฐแตแฐแแ แซแ แ แณแฒแต แดแญแแแแแฝแแฃ แแแ แแแต แ แฐแซแฎแฝแ แฅแ แจแแ แซ แตแซแแฝแ แฅแแแแแแข
โแ แ แญแดแแปแ แขแแฐแแแแต (AI) แจแณแแ แจแ แแ แฐแ แแแต แญแตแตแ
โแ แณแฒแต แดแญแแแแแฝ แ แแแฃแณ แตแแซแแฝ แแญ แแจแฐแฑ แจแแฝแ แ แฐแแแฝแ แ แตแแตแ แ แแฐแแ แญ แฅแ แจแฐแซแฐแแฝแ แจแฐแ แแแต แแ แ แแซ แฅแแแฝ (PPE) แ แ แแแ แ แซแแซ แ แแจแณแฐแ แจแแณแต แแ แแ แแแแต แจแแซแตแฝแ แฒแตแฐแแฝ แ แตแแต แฅแจแฐแแแ แญแแแแข
โแแ แฐแ แจแซแญแฆแ แแแต แซแแธแ แ แจแแแด แจแแแฃแณ แฅแแแฝ
โแจแ แจแญ แแฅแจแต แแแฅแ แแแแแ แ แแฐแจแแ แฅแจแต แแแ แ แแ แจแฎแแตแตแซแญแฝแ แขแแฑแตแตแชแแฝ แจแฃแ แแ แฒแแแถ แญแแ แ แแญแต แแฐแต แแตแฅ แ แแตแฐแ แซแญแฆแ แจแแซแแแฉ แ แณแฒแต แจแฒแแแถ แ แแซแฎแฝแ แฅแ แฅแแฐแแ แฅแ แ แแญ แแแ แจแแฝแ แจแฅแจแต แแญแถแฝแ แ แแ แแ แแญ แแธแแข
โแจแขแ แญแคแ (BIM - Building Information Modeling) แดแญแแแ
แแตแแต โแจแแฎแแญแถแฝแ แจแแตแแฃ แจแ แแต แฅแ แจแแ แฐแแณ แ แ แแต แฒแแณแ แแตแจแญ แแญ แ แแแ แถ แ แแซแ แจแแแฃแณ แตแ แฐแถแฝแ แฅแ แจแแฅแต แแฃแตแ แ แจแแฐแ แฐแจแ แจแแซแตแแญ แจแถแแตแแญ แ แ แแแ แ แ แแ แ แแ แฐแจแ แฅแแฐ แแแแ แฅแจแฐแแฐแฐ แญแแแแข
โแแฑแแญ แฅแ แแตแแ แฐแฐแแตแฐแ แจแแแ แ (Prefabricated) แคแถแฝ
โแจแฐแแต แฅแ แจแแแ แต แแชแ แแแแแต แฒแฃแ แจแ แแ แ แซแแต แ แแฅแชแซ แแตแฅ แฐแแแ แฐแ แจแแแฃแณ แฆแณ แแญ แ แแแ แจแแแ แแ แต แแแแ แ แฐแซแญ แ แแฃแ แจแฐแแฝ แแตแแแต แแญแแซแต แฐแแซแญ แฅแจแแ แแฅแทแแข
โแแแฌ แซแแแแแธแ แแแ แ แแ แดแญแแแแแฝ แฅแแแ แญแแตแแแค แแณแฅ แฅแ แ แตแฐแซแจแต แฅแแฒแแ แ แแแญ แแตแฅ แซแ แจแแแฃแณ แฅแ แจแขแแแแชแแ แแณแฎแฝแ แ แแซแฐแต แ แฅแจแ แฅแแแซแแแข
@etconp
โค5๐ฅฐ1
๐๏ธRCC & Masonry Structural Design Guide๐
๐แจRCC แฅแ Masonry แฒแแญแ แ แฐแแฃแญ แแแญ แญแแแแ? แญแ แแญแฅ แแ แแ แจแณแฝ แฃแแ แแแญ แซแแญแฑแต๐
https://ye-buna.com/etconp?ref=product_detail&product=6a951fc24c62a_etconp
๐แจRCC แฅแ Masonry แฒแแญแ แ แฐแแฃแญ แแแญ แญแแแแ? แญแ แแญแฅ แแ แแ แจแณแฝ แฃแแ แแแญ แซแแญแฑแต๐
https://ye-buna.com/etconp?ref=product_detail&product=6a951fc24c62a_etconp
โค1๐1
โแ แ แฒแต แ แ แฃ แ แแฃแฎแน 5 แแแณแต แ แจแแแฑ 100 แบแ
แจแแแชแซ แคแถแฝ แญแแแฃแ
โแจแ แฒแต แ แ แฃ แจแฐแ แ แตแฐแณแฐแญ แจแคแถแฝ แแแตแ แ แตแฐแณแฐแญ แขแฎ แฃแแแต แ แแตแต แแแณแต แฃแจแแแแธแ แแแแฅ แจแคแต แแแต แตแซแแฝ แจ496 แบแ แ แแญ แแแชแซ แคแถแฝแ แแแแฃแต แแปแแ แ แตแณแแแกแก
โแขแฎแ แ แแชแแน แ แแตแต แแแณแตแ แ แจแแแฑ 100 แบแ แคแถแฝแ แแแฅแถ แแคแต แแแแแน แแแ แจแฅ แฅแ แต แญแ แแฐ แตแซ แแแฃแฑแ แจแขแฎแ แแแ แแญแแฎ แ แตแตแต แแแฐแแฎแญแแต แแ แฒแต แแฒแซ แแตแแญแญ แแแธแแแข
โแจแแแชแแฝแ แจแแแชแซ แคแต แแแแต แ แแแแแต แแแแแต แ แฐแจแแแ แแแแฅ แตแซแแฝ แจแคแต แแแแตแ แ แ แญแฆแตแ แแแฃแฃแ แฐแ แฅแจแต แแฐแจแแ แจแ แแแต แแแแแฃ แฃแแแต แแแณแต แจแฐแแแแก แแ แแ แตแฌแถแฝ แจแแจแฐแแต แแธแแก
โแจแฐแจแแแ แจแแแฃแณ แแคแถแฝแฆ แฃแแแต แ แแตแต แแแณแต แแตแฅ แฅแป แแฐ 496 แบแ แจแแ แ แแแชแซ แคแถแฝ แฐแแแฅแฐแแแข
โแจแแ แแญแ แฐแณแตแแฆ แจแแแแตแตแ แฅแจแต แฅแป แณแญแแตแฅแค แจแแแ แแญแแ แชแ แตแดแต แ แแแแฝแ แ แแณแฐแ แแน แแแณแแฝแ แแฐแแฐแแฝ แฐแแฅแจแแแข
โแจแฐแ แแแแฝ แแแแแฆ แแ แ แซแตแ แ แแฐแซแแตแฃ แจ40/60 แฅแ แจ20/80 แจแแซ แแแชแซ แคแต แ แฃแแแฝแแฃ แจแแแแตแต แฐแซแฐแแฝแ แฅแแฒแแ แจแฐแแซแฉ แจแ แฅแจแฐแฐแฅ แญแแแฝแ แ แแแ แแฐ แคแต แแแต แฅแแฒแแก แฐแฐแญแแแข
โแ แแแแตแตแ แ แแ แ แแญแแต (PPP) แจแฐแจแแแ แ แณแฒแต แจแแแต แแณแแฒแแฝ แแคแต แแแซแณแธแแ แจแแแนแต แแญแแฎ แ แตแตแตแฃ แจแแแ แแญแ แ แตแแต แ แแณแฐแ แจแแแชแแฝแ แจแแฐแ แจแแแชแซ แคแต แฅแซแ แ แแแแแต แแแแต แจแแชแแน แ แแตแต แแแณแต แแ แแ แตแตแซแดแแแฝแ แฅแ แถแฝ แแซแจแ แ แแฑ แแแแ แ แตแแแแ แแแข
@etconp
โแจแ แฒแต แ แ แฃ แจแฐแ แ แตแฐแณแฐแญ แจแคแถแฝ แแแตแ แ แตแฐแณแฐแญ แขแฎ แฃแแแต แ แแตแต แแแณแต แฃแจแแแแธแ แแแแฅ แจแคแต แแแต แตแซแแฝ แจ496 แบแ แ แแญ แแแชแซ แคแถแฝแ แแแแฃแต แแปแแ แ แตแณแแแกแก
โแขแฎแ แ แแชแแน แ แแตแต แแแณแตแ แ แจแแแฑ 100 แบแ แคแถแฝแ แแแฅแถ แแคแต แแแแแน แแแ แจแฅ แฅแ แต แญแ แแฐ แตแซ แแแฃแฑแ แจแขแฎแ แแแ แแญแแฎ แ แตแตแต แแแฐแแฎแญแแต แแ แฒแต แแฒแซ แแตแแญแญ แแแธแแแข
โแจแแแชแแฝแ แจแแแชแซ แคแต แแแแต แ แแแแแต แแแแแต แ แฐแจแแแ แแแแฅ แตแซแแฝ แจแคแต แแแแตแ แ แ แญแฆแตแ แแแฃแฃแ แฐแ แฅแจแต แแฐแจแแ แจแ แแแต แแแแแฃ แฃแแแต แแแณแต แจแฐแแแแก แแ แแ แตแฌแถแฝ แจแแจแฐแแต แแธแแก
โแจแฐแจแแแ แจแแแฃแณ แแคแถแฝแฆ แฃแแแต แ แแตแต แแแณแต แแตแฅ แฅแป แแฐ 496 แบแ แจแแ แ แแแชแซ แคแถแฝ แฐแแแฅแฐแแแข
โแจแแ แแญแ แฐแณแตแแฆ แจแแแแตแตแ แฅแจแต แฅแป แณแญแแตแฅแค แจแแแ แแญแแ แชแ แตแดแต แ แแแแฝแ แ แแณแฐแ แแน แแแณแแฝแ แแฐแแฐแแฝ แฐแแฅแจแแแข
โแจแฐแ แแแแฝ แแแแแฆ แแ แ แซแตแ แ แแฐแซแแตแฃ แจ40/60 แฅแ แจ20/80 แจแแซ แแแชแซ แคแต แ แฃแแแฝแแฃ แจแแแแตแต แฐแซแฐแแฝแ แฅแแฒแแ แจแฐแแซแฉ แจแ แฅแจแฐแฐแฅ แญแแแฝแ แ แแแ แแฐ แคแต แแแต แฅแแฒแแก แฐแฐแญแแแข
โแ แแแแตแตแ แ แแ แ แแญแแต (PPP) แจแฐแจแแแ แ แณแฒแต แจแแแต แแณแแฒแแฝ แแคแต แแแซแณแธแแ แจแแแนแต แแญแแฎ แ แตแตแตแฃ แจแแแ แแญแ แ แตแแต แ แแณแฐแ แจแแแชแแฝแ แจแแฐแ แจแแแชแซ แคแต แฅแซแ แ แแแแแต แแแแต แจแแชแแน แ แแตแต แแแณแต แแ แแ แตแตแซแดแแแฝแ แฅแ แถแฝ แแซแจแ แ แแฑ แแแแ แ แตแแแแ แแแข
@etconp
โค6๐2๐ฅ1