Ethio Construction Engineering
32.3K subscribers
6.28K photos
359 videos
1.99K files
3.34K links
🔨 World Construction Engineering
Latest updates, tips, and tutorials on building, civil engineering, and construction in World.
Learn, build, and grow with us!

📨 @Philemona7 Or @ETCONpBOT

For Ad:- https://telega.io/c/etconp
Download Telegram
SIMON part 1 (1).rar
569.6 MB
👉G+3 መኖርያ ህንፃ MODELING ፣ ANALYSING እና DESIGNING በ ETABS @ETCONp
SIMON part 1 (2).rar
330.1 MB
👉G+3 መኖርያ ህንፃ MODELING ፣ ANALYSING እና DESIGNING በ ETABS @ETCONp
SIMON part 1 (3).rar
301 MB
👉G+3 መኖርያ ህንፃ MODELING ፣ ANALYSING እና DESIGNING በ ETABS @ETCONp
SIMON part 1 (4).rar
30.5 MB
👉G+3 መኖርያ ህንፃ MODELING ፣ ANALYSING እና DESIGNING በ ETABS @ETCONp
SIMON part 1 (5).rar
318.4 MB
👉G+3 መኖርያ ህንፃ MODELING ፣ ANALYSING እና DESIGNING በ ETABS @ETCONp
SIMON part 1 (6).rar
398.6 MB
👉G+3 መኖርያ ህንፃ MODELING ፣ ANALYSING እና DESIGNING በ ETABS @ETCONp
👆👆👆👆👆👆👆👆👆👆👆👆👆👆
፡
👉ትላንት ማታ ቃል በገባንላቹ መሠረት ሙሉ የ G+3 መኖርያ ህንፃ MODELING ፣ ANALYSING እና DESIGNING በ ETABS እንዴት መስራት እንደምንችል ቲቶርያል ቪድዮ ከነ ሌክቸር ኖቱ ይሀውላቹ፡፡
፡
🅾አሁኑኑ Join በማረግ እና ለጓደኛዎ እና ለሚያቁት ሁሉ ሼር ያድርጉ።
👉Types of Joints in Construction @ETCONp
.
▶️Construction Joints
▶️Expansion Joints
▶️Contraction Joints
.
👉Construction Joints
*At first, we cannot pour a larger quantity of concrete in a
single time. So at that time, a certain portion has poured as
per the recommended shuttering design and the remaining
portion will be poured after a certain period.
In that, the construction joints are using to connect the old
and fresh concrete and it is also called as cold joints.
:
👉Expansion Joints
*As we discussed, the construction materials are formed by
the different raw material. The concrete may shrink or
expand due to the weather condition.
*So the expansion joints gap are provided to accommodate
the movement happening by the expansion or shrinkages
and it is avoiding the disfiguration of the structure.
*Mostly the expansion joint gaps are providing in large
structure & bridge girder to spread eventual stress. The joint
gaps are filled by the expansion material like fibre, bitumen
or some other special material.
*Expansion joint might be provided in mid of each
span in bridges.
*The provision of expansion joints is when the
structure length exceeding 45m.
*The reinforcements should not be provided on the
expansion joint area.
*The expansion joint material will be different based on
the structure.
*The expansion joints are provided as per IS 3414.
:
👉Contraction Joints
*It is another type of joints which controls the cracks
happening due to shrinkages. The contraction joints are
placed as a groove where the crack may form in concrete.
If the shrinkage crack is formed in the concrete slab then
the contraction joints prevent spreading on the other area.
*Specification The width of the groove should not be less than 5mm.
*The contraction joint depth is 1/4th of the Concrete mean depth.
*It should be placed in the weakest zone of the slab.
Another name of contraction joint is Control Joint .
.
http://t.me/COTMp
👉ኮንክሪት ስላምፕ ቴስት @COTMp
.
⏩የኮንክሪት ስላምፕ ቴስት በሳይት የሚተገበር የፍተሻ አይነት ሲሆን የኮንክሪትን የመስራት አቅም (Workability) እና ፅኑእነት (Consistency) ለመለካት ይጠቅማል
.
➡ኮንክሪት ስላምፕ ቴስት በየእያንዳንዱ የኮንክሪት ሙሌት
ስራውስጥ መተግበር አለበት ። ስላምፕ ቴስት በትንሽ ወጪ
ምንተገብረው የኮንክሪትን Workability ምንመዝንበት ተመራጭ መፈተሻ ነው በዚህ ምክንያት ከ1922 GC ጀምሮ እስካሁን አገልግሎት ላይ እየዋለ ይገኛል።
.
➡የኮንክሪት ስላምፕ ቴስት ላይ ተፅዕኖ የሚያሳርፉ ነገሮች
(Factors which influence the concrete slump test)
.
1- ለ ኮንክሪቱ እንደግብአት የተጠቀምናቸው እቃዎች
ባህርይ...ለምሳሌ ስነውህድ (ኬሚስትሪ) ቅጥነት ፣ የቁሱ
መጠን እና ስርጭት (particle size and distribution) ፣
እርጥበት ፣ የሲሚንቶ ግብአት እና እርጥበት የመያዝ አቅም.
.
2- የኬሚካል አድሚክስቸር መጠን አይነት መስተጋብር...
.
3- የኮንክሪቱ አየር የመያዝ አቅም
.
4- ኮንክሪት ማቀላቀያ ማጓጓዣ ቁስ እና ዘዴ
.
5- የኮንክሪቱ temperature
.
6- በኮንክሪቱ ውስጥ የሚገኝ የውሃ መጠን
.
7- ኮንክሪቱ ለፍተሻ የተወሰደበት ግዜ
.
➡Slump test ለማድረግ የምንጠቀማቸው እቃዎች
.
Slump ለመስራት የሚያገለግል መሃሉ ክፍት የሆነ ኮን (cone) መሰል ቅርፅ ማውጫ ይህ ቅርፅ ማውጫ 30cm ርዝመት 20 cm የታችኛው ዲያሜትር 10cm የላይኛው ዲያሜትር ያለው ነው (mold) መለኪያ ማስመሪያ
ከብረት የተሰራ 16 mm dia. እና 60 cm ርዝመት ያለው መጠቅጠቂያ ብረት ያስፈልጉናል።
.
➡ስላምፕ ቴስትን የመከወኛ ቅደም ተከተል
.
*step-1 መጀመርያ የቅርፅ ማውጫ ኮን (mold ) ንፁ
መሆን አረጋግጥ ኮንክሪቱ በቀላሉ ከሞልድ እንዲላቀቅ ቅርፅ
ማውጫውን ዘይት መቀባት አለበት
.
*step-2 ቅርፅ ማውጫውን (mold ) ትልቅ ዲያሜትር
ባለው ጫፍ በኩል ወንፊት ባልሆነ ስሃን ላይ አቁመው
.
*Step 3- የቅርፅ ማውጫ (mold) በእኩል 4 layer በኮንክሪት ሙሉት
.
*Step 4- እያንዳንዱን የኮንክሪት ላየር 25 ግዜ
በመጠቅጠቂያ ብረት ምቱት (ጠቅጥቁት) የአጠቃጠቅ
ጉልበታችሁ እኩል መሆን አለበት
.
*Step 5- ኮኑ (mold) ከሞላ በኋላ ትንሽ ዲያ ባለው
ጫፍ ላይ ያል ትርፍ ኮንክሪትን አስወግዱት ጫፉንም ለስኑት
.
*Step 6- ቅስ በማለት የኮንክሪት ቅርፅ ማውጫውን
(mold) ከኮንክሪቱ አለያዩት
.
*Step 7- ቀጥሎም ኮንክሪቱ ከቅርፅ ማውጫ (mold)
ያለውን የርዝመት ልዩነት ለኩት
.
.
Note - እዚጋ ማሳሰብ ምፈልገው ነገር ይህን ቴስት ስታደርጉ ቦታው ከእርግብግቢት (Vibration) የፀዳ መሆን አለበት ያልተረጋጋ ቦታ ላይ ማድረግ የቴስቱን ውጤት
ያበላሸዋል...ሳምፕሉ ከተወሰደ በሁለት ደቂቃ ውስጥ ቴስቱን
መከወን አለብን
.
.
➡ከኮንክሪት ስላምፕ ቴስት የምናገኛቸው የውጤት አይነቶች
.
*True Slump - ይህ ከፍተሻው ምናገኘው ብቸኛው ልኬት
ነው ቅርፅ ማውጫው ከኮንክሪቱ ከተለያየ በኋላ ያለው የኮንክሪቱ
ቁመት ከቅርፅ ማውጫው በንፃሬ የምናገኘው ልዩነት (ምስሉን
ይመልከቱ)
.
*Zero Slump - ዜሮ ስላምፕ ኮንክሪቱ አነስተኛ የውሃ-
ሲሚንቶ ratio ያለው መሆኑን ያሳያል ዜሮ ስላምፕ ያለው ኮንክሪት ለመንገድ ግንባታ አገልግቶት ላይ ይውላል...
.
*Collapsed Slump - ይህ ደግሞ ከዜሮ ስላምፕ በተለየ
የኮንክሪቱን የውሃ ሲሚንቶ ውህድ Ratio ትልቅ መሆን ያሳያል
ይህ ማለት የኮንክሪቱ የእርጥበት መጠን ከፍተኛ መሆኑን እና
High workability mix ያሳየናል።
.
*Shear Slump- ይህ ደግሞ የፍተሻው ውጤት ሙሉ
እንዳልሆነ ይነግረናል።
.
ለሁሉም እንዲዳረስ ፖስቶቹን SHARE አድርጉልን።
👇👇👇👇👇
Join for more updates via the link below;
t.me/COTMp
👆👆👆👆👆
👉ስለ ብሎኬት @COTMp
.
⏩Hollow Concret Block (HCB) ወይም የግድግዳ ብሎኬት/Wall HCB/ በመባል ይታወቃል።
*የብሎኬት ምርት ሲደረግ ጠቀሜታው ለሁለት ጉዳይ ነው
1. ሸክም መቌቌም የሚችል/Load Bearing/
2. ሸክም መቌቌም የማይችል /Non-Load Bearing/
*ይሄንን መሰረት ያደረገም የደረጃ ክፍፍል/Class/ ይኖራቸዋል።
*ሸክም መቌቌም የሚችሉት ብሎኬቶች "ክላስ ኤ እና ቢ" /
Class A and B/ በመባል ሲመደቡ ሸክም መቌቌም
የማይችሉት የብሎኬቶች ደግሞ "ክላስ ሲ" /Class C/ በመባል
ይመደባሉ።
➡ብሎኬት በተለምዶ በመጠናቸው ባለ10፣ ባለ15 እና ባለ 20 በመባል ይለያሉ::
ርዝመት x ስፋት x ቁመት/ Length x width x depth/
ማለትም Standard Dimenssion
*40x20x20cm
*40x15x20cm
*40x10x20cm
➡እያንዳንዱ ብሎኬት ሸክም የመቌቌም አቅማቸው
በሜጋ ፓስካል(Mpa) ይለካል ከዚህ በላይ 👆 በምስል አስደግፈናል።
*Note:
1 kilogram per square centimetre = 0.0981 mega pascal

*Class A=3.8mpa
*Class B=3.2mpa
*Class C=1.8mpa
.
⚡ለሁሉም እንዲዳረስ ፖስቶቹን SHARE አድርጉልን።
👉ፎርምወርክ/Formwork/ @COTMp
➡በምን ያህል ቀን ማፍረስ ይቻላል?👇
.
⏩ ለቌሚ ፎርምወርክ 16ሰዓት
⏩ ለወለል እና ደረጃ /ሶሌታ/ ፎርምወረክ 21 ቀን
⏩ ተጨማሪ ለቢም/beam/ እና ወለል/slab/ ድጋፍ የሚገባ
14ቀን
⚡ የፎርም ወርክ ክፍያን በተመለከተ ባትኮዳ/Batcoda/ ከዚህ በታች የተዘረዘሩትን ነጥቦች ይጠቅሳል።
1. ከ 0.25ካ.ሜ በታች የሆነ ክፍት/opening/ ፎርሞርክ ክፍያ
ላይ ሊቀነስ አይገባም።
2. በተለየ ሁኔታ ካልተጠቀሰ በስተቀር በካ. ሜ ሊለካ ይገባል።
3. የወለል ጠርዝ፣ የደረጃ መወጣጫ እና የጎን ፎርምወረክ
ጥልቀቱን በመጥቀስ በሜትር ሊለኩ ይገባል።
.
🚩ለሁሉም እንዲዳረስ ፖስቶቹን SHARE አድርጉልን።
👋ሰላም የዚህ ግሩፕ ኣባላት በሙሉ... @COTMp
.
▶️ይህ ግሩፕ ለ እናንተ ተማሪዎች እና ባለሞያዎች ጠቃሚ የ ኮንስትራክሽን ሌክቸር ኖቶች፣በ ምስል ና ቪድዮ የተደገፉ ትምህርቶች እና የተመረጡ መፅሃፍቶች በማስተላለፍ እንዲሁም እርሰበርሳችን እየተማማርን እንዳለን ይታወቃል።
.
▶️ስለዚህ ከዚህ በይበልጥ እንድናውቅ እዚህ ግሩፕ ላይ ኣወያይ ሃሳቦች እና ጥያቄዎች በ መፃፍ እንዲሁም ጓደኞቻችን እዚህ ግሩፕ እንዲቀላቀሉ Add በማረግ እንዲሁም እዚህ ከታች ባለው ግሩፕ ያልተቀላቀላቹ JOIN በማድረግ እርሰበርሳችን እየተማማርን የ ሃገራችን ኮንስትራክሽን ኢንዱስትሪ እንድንቀይር ሃለፊነታችን እንወጣ ስንል በ ትህትና ነው፡ እናመሰግናለን፡፡🙏
፡
👇👇👇👇👇👇👇
፡
http://t.me/COTMp
Name this test ?

@etconp
Regatta Arch Hotel
Location:- JAKARTA INDONESIA 🇮🇩
Status:- under construction
The magnificent landmark Regatta Arch Hotel is a curvaceous 320 room, 5 star resort towering 169 meters above the Java sea.
Architect:- WS Atkins , UK
Structural engineer:- Davy sukamta
Construction started:- 2009GC

ውብ ምሽት ተመኘን

@etconp
Bonds in brick wall 🧱
Percentage strength of concrete at various stage

@etconp
እንኳን ለአድዋ በዓል በሰላም አደረሳችሁ
ብዙዎቹ በጠየቃችሁን መሰረት የETABS እና የ SAPን ልዩነት ይዘንላችሁ መተናል

The difference between SAP and ETABS


As the name states ETABS( Extended Tridimensional Analyses of Building Structures), this program is mostly used for design of   highrise building structure. While SAP2000( Structural Analyses Programme) is a general purpose analyses software which can be used for any building or non building structures.
The answer to your primary question is that both are used for various aspects of building design depending on which tool is best suited for the application. If there is a more specific question regarding a particular application, I'd be happy to address that as well.  I will try to describe how we utilize both of these tools in current practice. Perhaps this will help bring the strengths of each to light.  SAP2000:
• This program is primarily used for gravity analysis and design
• This tool is often utilized for smaller structures, or portions of a larger structure. 
• It is great at handling complex geometry as it offers users a lot of different element types and a lot of customization with regards to meshing options.
• It can also be used for wind analysis and for more simplified seismic design procedures. However, it will take more data post-processing to retrieve the desired results for story drift, story shear, base shear etc.
• It lacks some of the simplicity that ETABS has of discretizing the structure into macroscopic elements.
ETABS:
• This program is most utilized for handling large scale seismic (or wind) projects, including those that involve Non-Linear modeling.
• It allows for more simplified modeling of the entire structure, enabling the designer to focus on macroscopic performance targets
• It is well equipped to handle simplified lateral procedures, Push-over analysis, Response Spectrum Analysis, and Response History Analysis.
• The data output options are much more conducive to lateral design
Please note that there are likely are some finer points regarding the differences between each program in regards to the analysis engine and solver. This is something only some folks from Computers & Structures Inc (the manufacturer) can answer.

@etconp
Name this test ?

@etconp