Ethio Construction Engineering
32.3K subscribers
6.28K photos
359 videos
1.99K files
3.34K links
🔨 World Construction Engineering
Latest updates, tips, and tutorials on building, civil engineering, and construction in World.
Learn, build, and grow with us!

📨 @Philemona7 Or @ETCONpBOT

For Ad:- https://telega.io/c/etconp
Download Telegram
👉ውቢትዋ ባህርዳር ከተማ😍
፡
👌የናንተ ከተማም ላኩልን😎
፡
▶️ውብ ምሽት ተመኘን❤️
❤1
Ethio Construction Engineering
List functions of foundation?
ብዙዎቹ ለጥያቄው ትክክለኛ መልስ ሰታችሁናል ለዚህም እናመሰግናለን

Answer
➡️foundation distribute loads of super structure to large area so that the intensity of load at its base less than bearing capacity of subsoil.
➡️foundation also provide the level surface for the masonry work of which the superstructure can be built.
➡️foundation gives the lateral stability of the building against natural disturbances( wind, earthquake etc...)
➡️ foundation protects the structure against soil movements.
👍1
👉እንወያይበት ... @COTMp
.
✉️simply supported beam ...

▶️I would like to start my discussion on RCC structures by stating some points on modes of failure of RCC sections.
.
*The failure modes to be discussed here are based on the amount of reinforcement present on the section.
:
*Rcc sections can fail in one of the three ways:-

1. The reinforcement yielding before the concerete reaching its maximum stain( 3.5 per thousand in EBCS-2,1995)

2. The reinforcement reaching its yielding stain and at the same time the concerete reaching its ultimate strain.

3. The concerete reaching its crushing stain before the reinforcement yields.

[The second mode of failure is called balanced failure and from this point forward it might be used as balanced failure or in terms of the amount of reinforcement as balanced reinforcement.]

*The first mode of failure, which is the most desirable in the senses that it gives ample time before complete collapse , occurs when the amount of reinforcement provided in the section is less than the balanced reinforcement.

*The second mode of failure occurs when the amount of reinforcement provided is such that the steel and the concerete reach their ultimate carrying capacity at the same time.

*The third mode of failure, which is undesirable in the sense that failure is catastrophic and immediate, is a result of reinforcing the section beyond the balanced reinforcement.
.
👉ሃሳብ ለመስጠት ከታች ባለው ሊንክ ፃፉልን👇
https://t.me/COTMp
👉ቅደመ ክፍያ @COTMp
▶ADVANCE PAYMENT
.
➡በልዩ ሁኔታ ለፕሮጀክቱ የተዘጋጀው የኮንትራት ውል ቅድሚያ ክፍያ/advance payment/ የሚፈቅድ ከሆነ ስራ ተቌራጩ ስራውን ለማሰጀመር ማሽነሪ እና የግንባታ ግብአት ለማስገባት በሚጠየቅ ግዜ የሚከፈል ክፍያ ሲሆን ከዚህ በታች የተጠቀሱትን ቅድመ ሁኔታዎች መሟላት ይኖርባቸዋል
1) ቅድመ ክፍያው ስራ ተቋራጩን የሰራ ውሉን ተፈፃሚ የሚያደርግበትን የጠቅላላ ግምት ነው።
2)በልዩ ሁኔታ የተዘጋጀው የኮንትራት ውል(Special condition of contract) የቅድሚያ ክፍያውን መጠን መግለፅ ሲኖርበት ነገር ግን ከጠቅላላ ፕሮጀክት ወጪ ሰላሳ (30%)ፐርሰንት መብለጥ የለበትም።
3) ውል ተፈፅሞ ፕሮጀክት ሳይት ርክክብ ሳይደረግ ቅድሚያ ክፍያ አይሰጠውም።
4) ስራ ተቋራጩ ለሚወስደው ክፍያ ዋስትና ቦንድ ሊያቀርብ ይገባል።
Forwarded from Ethio Construction Engineering (जॉर्डनो ג׳ורדנו ጆርዳኖ جوردانو จอร์แดโน่ JORDANO Ιορδάνοςஜார்டானோ)
This media is not supported in your browser
VIEW IN TELEGRAM
Demolishing high rise building with in a second
Kensai airport japan 🇯🇵
It’s the first artificial island airport
It’s artificial island like palm jumerh in Dubai

ውብ ምሽት ተመኘን
كنا نتمنى أمسية جميلة
我們希望有一個美麗的夜晚
हमने एक खूबसूरत शाम की कामना की
We wished a beautiful evening
@ETCONp
እንደምን አደራችሁ ውድ የ @ETCONp ቤተሰቦች
Chongqing China 🇨🇳
What machine is this ?
1. Multiple purpose excavator
2. Dumper
3. Loader
4. Hopper
Ethio Construction Engineering pinned «👉WHAT IS PLOT AREA, CARPET AREA, BUILT UP AREA, SUPER BUILT UP AREA & SETBACK AREA??? . ▶️PLOT AREA: Plot area commonly known as site area is a piece of land enclosed by definite boundaries. The mean horizontal distance between the front and rear site boundaries…»
The point of contraflexure is the point where

1. Bending moment changes sign
2. Bending moment is maximum
3. Bending moment is minimum
4. Shear force is zero
👉Staircase Design Principles @ETCONp
.
▶️A staircase is an integral part of a building. It is a series of steps arranged in an order so that people can go from one floor of a building to another . The stair should be as per standard design principles and constructed in a such a manner that people can negotiate the steps with ease.
.
▶️Staircase
.
▶️A staircase is an integral part of a building; residence, office or public utility. It is designed and built according to the local building codes. A staircase may be straight, circular, flared or spiral. Ergonomic design principles are to be followed in the planning and construction of stairs to avoid inconvenience to the users as well as to avoid accidents.
.
▶️Staircase Design Principles
.
▶️Stairs are a series of steps arranged in an order to provide access from one floor of a building to another floor. They should be provided in a convenient location of the building. In case of a multistory building, though elevators will be there for the normal movement from one floor to another, stairs are a must for emergency exit in case of fire or other calamities.
.
▶️Technical Terms
.
👉The following are the technical terms associated with a stair.

1. Step: The portion of the stair where the foot lands during ascending/descending.

2. Tread: The horizontal portion of a step.

3. Riser: The vertical portion of a step.

4. Stringer: The inclined member which supports the steps.

5. Landing: It is the horizontal platform provided at the end of each flight.

6. Pitch: It is the slope of the stair.

7. Railing: It is the inclined member of a stair which is to support the hand.

8. while descending or ascending.

9. Baluster: It is the vertical intermediate support of the hand-rail.

▶️Characteristics of a Good Stair

👉 The following are the characteristics of a good stair.

10. It should have easy access from all sides of the building

11. It should be well ventilated

12. It should have wide landing at end of each flight

13. Normally there should not be more than 12 steps in a flight.

14. The rise and go of the steps should be so proportioned that the ascending and descending of the flight is easy.

15. Handrail must be provided at least on one side of the stair

16. The inclination of the stair should be between 30 to 45 degrees.

▶️Types of Stairs
.
👉The different types of stairs are:
.
*Straight stairs

*Quarter-turn stairs

*Dog-legged stairs

*Open-newel stairs

*Circular stairs

*Bifurcated stairs

*Geometrical stairs

*Spiral stairs

*Construction of Stairs
:
👉Stairs are constructed with any of the following materials.
.
▶️Brick masonry, Stone masonry, Timber, Steel, Reinforced Cement Concrete
.
▶️Summary of Staircase Design Principles

17. Type of Stair: The type of stair depends on the type of building, availability of space and the purpose of stair.

18. Rise and Going: The standard rise and tread is 15 x 25 cm. However the dimensions can be changed depending on the actual site conditions.

19. Number of rises: The number of rises is equal to the total height of the room divided by one rise.

20. Number of threads: This is equal to number of rises minus one.
.
✉️SHARE SHARE SHARE
👉Foundation Types @ETCONp
.
1. Shallow Foundations..
.
▶️Types: Strips, Pads, Rafts
.
*Shallow Foundations are common in construction and are inexpensive due to their lightweight properties. It is usually not required to employ heavy equipment for constructing shallow foundations.
Situations where they should be used in:
Shallow foundations are used when the strata at shallow depths is strong and has enough bearing capacity to support the above building loads, with respect to reasonable differential settlements. The strong strata must be consistent at the shallow depth, so that settlement can be relatively small.
● Rock or dense sand or gravel that goes towards great depths

○ However, it should be noted that shallow foundations should not be designed below GWT and when there are great uplift conditions. The more moisture content is in he soil, the less resistance the foundation gives to the above loads.

● Firm clays at shallow depths lying on top of soft clays that go towards great depths

● Uniform firm clays when there are no trees around the proximity of the foundation structure and around temporary works and where loads can be distributed on the surface area of the foundation

*Situations where they can be used in with ground improvement techniques:
● Loose sands and soft clays at great depths

○ Ground improvement should be used because towards the greater depths, groundwater level changes. Also, vibration of equipment can cause overall and differential settlement.

● Peat

○ Consider the acidity of soil when implementing ground improvement techniques

● Fill

○ More appropriate if the fill is well compacted which will create a higher bearing capacity

● Stiff or high density sand or clay on top of soft clay lying over compact clays at great depths

● Sloping site where sloping effects should be considered and support, such as ground improvement and temporary works, should be used to construct the foundation

● Site with high GWT where dewatering techniques should be used

2. Deep Foundations
.
▶️Types: Piles (Click to learn the different types of piles)
*Deep foundations are heavy foundation structures used to transmit heavy loads created from loading and self-weight of the superstructure into the soils of the deep stratum. They can prevent large differential settlements that will affect the strength and robustness of the building. Information that need to be included during scheme design consist of:
● Number of piles

● Diameter of piles

● Thickness of pile caps

*Situations where they should be used in:
Deep foundations are used when the strong strata is located at a depth and piles, caissons, or piers are driven or bored to the strong strata so that structural columns or walls can transmit loads directly to the rock strata. Deep foundations are also used when the soils between the surface and the rock strata has high settlement rate, such as peat and silt. Loads are transmitted and resisted by end-bearing and skin friction.
● Weak soil stratum or loose sand underneath strong or weak stratum

○ Driving piles can also help to increase the density of sand and stiffness of clay

● Uniform stiff and firm clays, with trees at the proximity of the foundation

○ Even though trees can affect the shrinkage and expansion of soil, trees will not affect the foundation negatively due to piling.

● Peat

○ Consider drag on piles and acidicity of soil when implementing ground improvement techniques

● Suitable for high water tables and uplift conditions

○ Deep foundations do not need as much dewatering as shallow foundations

○ Bored piles should be cased to prevent water damage to piles

○ Temporary works should be carefully designed for the stability of the foundation

● Stiff or high density sand or clay on top of soft clay lying over compact clays at great depth

● Soft clay on top to stiff clay at great depths

○ Use deep bored piles with casing

● Proposed foundation is close to adjacent building
❤1
👉 Facts about the Eiffel Tower @ETCONP
.
👌SHARE SHARE SHARE
.
👇👇👇👇👇👇👇👇👇👇
Ethio Construction Engineering
👉 Facts about the Eiffel Tower @ETCONP . 👌SHARE SHARE SHARE . 👇👇👇👇👇👇👇👇👇👇
👉 Facts about the Eiffel Tower @ETCONP
.
▶️The history and design aspects of the Eiffel Tower are interesting for engineers even today. Wrought iron was used for the construction of Eiffel Tower with the employment of scaffolds. Mathematical formulas were deliberated for numerous calculations for wind forces and load conditions.
.
▶️History Of Eiffel Tower
.....................................
The Eiffel Tower was constructed in Paris for the World Fair 1889 celebrating the centennial of the French Revolution. The Prince of Wales inaugurated the tower. The number of proposals submitted for the design of Eiffel Tower exceeded 700, and Alexandre Gustave Eiffel was selected for this important task. The Eiffel Tower is an iron lattice of the 19th century that is considered to be a universal symbol. It is amongst the Seven Wonders of the World, and one of the most familiar structures. The Eiffel Tower was initially intended to be built in Barcelona, but the location was changed since it was considered to be an expensive proposal. Three hundred workers were employed for this gigantic task that was completed in 2 years and 2 months. The construction involved extensive risks since the safety technology was not yet developed adequately in that era. Risks were severe since neither the modern skyscrapers were available nor the other modern safety equipment had yet been developed. However, due to the care and precautions adopted in the construction, only one labor died during the process.
.
▶️Soil Analysis
............................................
Soil analysis was conducted to accurately establish the suitability of soil for the tower with a weight of approximately 10,000 tonnes. It was discovered that though some of the soil was firm and suitable for enduring the tower load, a lot was soft soil that could not resist the heavy load. Additionally, this area was vulnerable to flooding. Using his engineering genius, Eiffel designed two separate systems for the tower foundations, namely the dry foundation and the compressed air system. The foundations near the riverside were dug deeper than those located on the dry side. These foundations were injected with compressed air and metal components normally used for the underwater construction. After completion of the digging, quick drying cement was poured for the provision of the base for the foundation piers. Massive limestone blocks were placed over the cement and sealed by layers of cut stone.
.
▶️Engineering Characteristics of Eiffel Tower
.........................................
The Eiffel Tower was built utilizing the most modern engineering technology available in the nineteenth century. Advanced information about the performance of metal trusses and metal arcs under load, including the calculations related to the wind forces, were incorporated in the design. The tower was made of wrought iron and was intended to withstand high wind pressures near the top and throughout the structure. Many similar structures constructed during that era had much less capability to resist such high wind pressures, and a few of the bridges failed due to inaccurate calculations. The design of the Eiffel Tower was not based on a single mathematical formula. Instead, graphical results were used to determine the necessary structural strength, and empirical evidence was utilized to establish the effects of wind on this gigantic structure.
❤1
Los angels California USA 🇺🇸

ውብ ምሽት ተመኘን
كنا نتمنى أمسية جميلة
我們希望有一個美麗的夜晚
हमने एक खूबसूरत शाम की कामना की
We wished a beautiful evening
@ETCONp
👉የ ዕለተ ዕሁድ ጠቃሚ ጉርሻ ከ @ETCONp
.
▶️የፕረዘንቴሽን ፍርሀትን እንዴት ማስወገድ እንችላለን?
.
✍ፕረዘንቴሽን በትምህርት ሂወታችን ውስጥ ከሚያጋጥሙን ሂደቶችና የመፈተኛ መንገዶች ውስጥ አንዱ ነው፡፡
*በተለይ በከፍተኛ ትምህርት ላይ መምህራን አሳሳይንመንቶችን ፣ ፕሮጀክቶችን ፣ የምርምር ስራዎችን እና የመሳሰሉትን ተማሪዎች በክላስ ውስጥ ፕረዘንት እንዲያደርጉ ይጠይቃሉ፡፡
*ከትምህርት አለም ውጪም በተለያዮ የስራ ጉዳዮች ላይ ፕረዘንት እንድናደርግ ሊጠበቅብን ይችላል፡፡
*ታዲያ በፕረዘንቴሽን ጊዜ የብዙዎች ችግር ፍርሀት ነው፡፡ ሰው ፊት ቆሞ የመናገር ፍርሀት፡፡
*የፕረዘንቴሽን ፍርሀት የብዙ ሰዎች ችግር ነው፡፡ ጥናቶች እንደሚጠቁሙት እስከ 80 % የሚሆኑትን ሰዎች ጋር ያለ ችግር ነው፡፡ በእርግጥ ችግር ነው ተብሎም ሊነሳም አይችል ይሆናል፡፡ ምክንያቱም መምህራንን ጨምሮ የ public speaking ልምድ ያላቸው አርቲስቶች፣ ፓለቲከኞች፣ የሀይማኖት መሪዎች ሁሉ የሚጋሩት common ስሜት ስለሆነ ነው፡፡
*ይህ የፕረዘንቴሽን (public speaking) ፍርሀት ጤናማ ስሜት ነው፡፡ የሁሉም ሰው የጋራ ሰሜትና እንዲያውም የራሱ ጥቅሞችም ያሉት ስሜት ነው፡፡ ችግር የሚሆነው ፍርሀቱ በጣም ከበዛና ቅጥ ካጣ ነው፡፡
የሚከተሉት መንገዶች የፕረዘንቴሽንን ፍርሀት ለመቀነስና ውጤታማ ፕረዘንቴሽን ለማድረግ ያግዛሉ፡፡
1. የፕረዘንቴሽን ፍርሀት ጤናማና common ስሜት እንደሆነ መረዳት፡፡
Literally ሁሉም ሰው ይፈራል፡፡ ልዮነቱ፡አንዳንዶች ማኔጅ ያደርጉታል አንዳንዶች አያደርጉትም፡፡
*ይህ የፍርሀት ስሜት ሊያስደነግጠን ሳይሆን በደንብ እንድንዘጋጅ ሊያመላክተን ይገባል፡፡
*ፍርሀት ጥቅም አለው፡፡ ይሄውም ባዮሎጂካሊ በሰውነታችን ውስጥ የሆርሞንን መጠን ከፍ በማድረግ የበለጠ ኢነርጂ እንዲኖረን ያደርጋል፡፡
2. ፕረዘንቴሽን ልምምድ (rehearsal )
ፕረዘንቴሽን ልምምድ ይፈልጋል፡፡ ፕረዘንት የምናደርገውን ነገር በደንብ ማወቃችንን፣ ቋንቋችንን፣ ድምፃችንን እንዲሁም ሰአት አጠቃቀማችንን የምናስተካክለው በልምምድ ኀው፡፡
*ፕረዘንት የሚያደርግ ሰው ልክ እንደ መድረክ ተዋናይ ነው፡፡ ፕረዘንቴሽንም በራሱ በተወሰነ መንገድ ትወና ነው፡፡ በመሆኑም ማንም ተዋናይ በደንብ ሳይለማመድ መድረክ ላይ እንደማይወጣ ፕረዘንት የሚያደርግ ሰውም በበቂ ሁኔታ ልምምድ ማድረግ ይኖርበታል፡፡
*በምንለማመድበት ጊዜ ጓደኞቻችን ፊት ሊሇን ይችላል ወይም ብቻችንን ቆመን ሰው ፊት እንዳለን በማሰብ መለማመድ ይቻላል፡፡
" Practice makes perfect"
3. መረጋጋት፣ እራስን ማረጋጋት
4. በቂ አየር መውሰድ ፣ መተንፈስ
5. ፕረዘንት የምናደርግበትን ቦታና መምህራኑን ቀድሞ ማወቅ፡፡ ይህም ሲባል ፕረዘንት የምናደርግበት ቦታ ቀደም ብለን በመሄድ ማየትና የምንቆምበትን ቦታ ስሜቱን መረዳት ነው፡፡
6. አለባበስን ማስተካከል፡፡ ጥሩ አለባበስ በራስ መተማመንን ይጨምራል፡፡
7. ፕረዘንት የማድረግ ፍላጎትን ማዳበር፣ ይህም ሲባል ፕረዘንቴሽንን እንደ ግዴታ ሳይሆን የሰራነውን ነገር ለሰዎች እንደምናሳይበት እንደ ጥሩ አጋጣሚ መውሰድ፡፡
8. በቂ አረፍት ወስዶ መገኘት
9. ቀደም ብሎ መገኘት (አለማርፈድ)
10. ከመጀመሪያው ውጤታማ ስራ መስራት፡፡ ምክንያቱም የአንዳንዶች የፍርሀት ምንጭ በቂ ስራ ካለመስራትና ካለመዘጋጀት ነው፡፡
.
http://t.me/ETCONp
▶️TODAY BIG TIP ... @ETCONp
:
👉አብዛኛዎቻቹ በጠየቃችሁን መሰረት እንዲሁም ኣሁን ለምትሰሩት HOLSTIC PROJECT አጋዥ ይሆናሉ ብለን ያሰብናቸው የ HOLSTIC PROJECT SAMPLE እንካቹ ብለናል፡፡
፡
🅾አሁኑኑ Join በማረግ እና ለጓደኛዎ እና ለሚያቁት ሁሉ ሼር ያድርጉ።
.
👇👇👇👇👇👇👇👇👇👇👇👇👇