What is the difference between C30 concrete and M30 concrete? And what does PSI mean?
እኛ እንደምናውቀው የ concrete grade የሚገለፀው C-5,C-20, C-30...... እየተባለ ነው።
ግን እዚህ ምስል ላይ የምትመለከቱት 👆🏾👆🏾.... M5,M30, M30 እያለ ነው።
❓ምንድንነው የሁለቱ ልዩነት
ሌላኛው እዚህ ምስል ላይ PSI ይላል።
❔what does PSI stands for
#share this and let’s discuss @cotmp
ይህን ጥያቄ ለጓደኞቻችው በማጋራት አጋርነታችሁን አሳዩን 🙏።
@etconp
እኛ እንደምናውቀው የ concrete grade የሚገለፀው C-5,C-20, C-30...... እየተባለ ነው።
ግን እዚህ ምስል ላይ የምትመለከቱት 👆🏾👆🏾.... M5,M30, M30 እያለ ነው።
❓ምንድንነው የሁለቱ ልዩነት
ሌላኛው እዚህ ምስል ላይ PSI ይላል።
❔what does PSI stands for
#share this and let’s discuss @cotmp
ይህን ጥያቄ ለጓደኞቻችው በማጋራት አጋርነታችሁን አሳዩን 🙏።
@etconp
Engineering Important Terms By Asdenaki M.pdf
1.2 MB
📚ዛሬ ደሞ ምርጥ ኖቶች የያዘች ስለ Dam,Road,Building እና Water በ ኣንድ ላይ የያዘች በ ወዳጃችን ኣስደናቂ የተዘጋጀች ይዘንላቹ ቀርበናል።
.
⚡️እናንተም ሼር በማረግ ኣጋርነታቹ ኣሳዩን።
@etconp
.
⚡️እናንተም ሼር በማረግ ኣጋርነታቹ ኣሳዩን።
@etconp
Forwarded from Ethio Construction Engineering (Fîłmøñ Łûël)
👉ስለ Contour Lines ኣብረን እንይ
፡
▶️Characteristics of contour lines are:
1. Connect point of equal elevation.
2. Always connects close contour lines. This is not always visible on the map.
3. They never cross, split or intersect – at a cliff they might merge.
4. Evenly spaced contour lines indicate a uniform slope.
5. Closely spaced contour lines show a steep slope.
6. Widely spaced contour lines show gentle slope.
7. Uneven spacing – irregular or variable slope.
9. Closed contours with arrow in the centre represent depressions.
፡
▶️Other characteristics of contour lines are:
- Horizontal distance between contour lines is inversely proportional to slope.
- Uniform slopes have uniformly spaced lines.
- Along plane surfaces, contour lines are straight and parallel.
- Contour lines are perpendicular to lines of steepest slopes.
- For summits or depressions, contour lines most close upon themselves.
- A single contour line can not lie between two lines of higher or lower elevation.
፡
▶️There are some basic rules for contour lines:
1. A contour line must never split or divide.
2. A contour line must never simply end, except at the edge of the map.
3. A contour line must represent one and only one elevation.
4. A contour line may never intersect other contour lines. Overhanging cliffs are
the only exception.
5. Concentric circles of contour lines indicate a hilltop or mountain peak.
6. Concentric circles of hatched contour lines indicate a closed depression.
.
👇👇👇👇👇
👉Join for more Construction updates Join via the link below;👇
t.me/COTMp
👆👆👆👆👆
⚡ አሁኑኑ Join በማረግ እና ለጓደኛዎ እና ለሚያቁት ሁሉ ሼር ያድርጉ።
፡
▶️Characteristics of contour lines are:
1. Connect point of equal elevation.
2. Always connects close contour lines. This is not always visible on the map.
3. They never cross, split or intersect – at a cliff they might merge.
4. Evenly spaced contour lines indicate a uniform slope.
5. Closely spaced contour lines show a steep slope.
6. Widely spaced contour lines show gentle slope.
7. Uneven spacing – irregular or variable slope.
9. Closed contours with arrow in the centre represent depressions.
፡
▶️Other characteristics of contour lines are:
- Horizontal distance between contour lines is inversely proportional to slope.
- Uniform slopes have uniformly spaced lines.
- Along plane surfaces, contour lines are straight and parallel.
- Contour lines are perpendicular to lines of steepest slopes.
- For summits or depressions, contour lines most close upon themselves.
- A single contour line can not lie between two lines of higher or lower elevation.
፡
▶️There are some basic rules for contour lines:
1. A contour line must never split or divide.
2. A contour line must never simply end, except at the edge of the map.
3. A contour line must represent one and only one elevation.
4. A contour line may never intersect other contour lines. Overhanging cliffs are
the only exception.
5. Concentric circles of contour lines indicate a hilltop or mountain peak.
6. Concentric circles of hatched contour lines indicate a closed depression.
.
👇👇👇👇👇
👉Join for more Construction updates Join via the link below;👇
t.me/COTMp
👆👆👆👆👆
⚡ አሁኑኑ Join በማረግ እና ለጓደኛዎ እና ለሚያቁት ሁሉ ሼር ያድርጉ።
Telegram
ETCONp Discussion
📩ለማነኛውም ሀሳብ እና አስተያየት @Philemona7
✌️ይህ የ @etconp መወያያ ግሩፓቹ ነው።
✋This is discussion group of @ETCONpWORK
.
🔖ማሳሰብያ ...
.
⚡️ግሩፑ ላይ ማነኛውም ከ ኮንስትራክሽን ጉዳዮች ውጪ መለጠፍ በፍፁም አይፈቀድም!
@ETCONpBOT ፃፉልን እናመሰግናለን🙏
✌️ይህ የ @etconp መወያያ ግሩፓቹ ነው።
✋This is discussion group of @ETCONpWORK
.
🔖ማሳሰብያ ...
.
⚡️ግሩፑ ላይ ማነኛውም ከ ኮንስትራክሽን ጉዳዮች ውጪ መለጠፍ በፍፁም አይፈቀድም!
@ETCONpBOT ፃፉልን እናመሰግናለን🙏
👉What is meant by air entrained concrete?
▶️Why is air content important in concrete?
▶️Any disadvantages?
.
Write your answer on @COTMp
▶️Why is air content important in concrete?
▶️Any disadvantages?
.
Write your answer on @COTMp
Ethio Construction Engineering
What is the difference between C30 concrete and M30 concrete? And what does PSI mean? እኛ እንደምናውቀው የ concrete grade የሚገለፀው C-5,C-20, C-30...... እየተባለ ነው። ግን እዚህ ምስል ላይ የምትመለከቱት 👆🏾👆🏾.... M5,M30, M30 እያለ ነው። ❓ምንድንነው የሁለቱ ልዩነት ሌላኛው እዚህ ምስል ላይ PSI ይላል። …
Answer for this question
C - stands for concrete strength class
M- stands for MIX
Concrete strength’ሁን የሚያገኘው ከ mix design ነው።
M30 signifies that a CUBE of size
15cm x 15 cm x 15cm made of cement ( Portland cement) + sand ( fine aggregate) + gravel ( coarse aggregate) in such ratio that is characteristic strength (𝑓𝑐𝑘) is 30N/mm² after 28days of curing , whereas C30 symbolizes a CYLINDRICAL sample in which cement ( Portland cement ) + fine aggregate ( sand) + gravel( coarse aggregate) are mixed in such ratio that’s characteristic strength (𝑓𝑐𝑘) after 28 days of curing is 30N/mm² .
Let’s see the conversion
Strength of cylinder sample= 0.8 x strength of cube
Example M20 is equivalent to to C16 and M20 is equivalent to 20
Standard
➪ Cube size as I mentioned
15cmx 15cm x15cm
➪ cylinder size
15 cm diameter x 30 cm height
PSI stands for pounds per square inch
1 PSI= 0.00689 MPA
#watermark
#share
ይህን በማጋራት አጋርነታችሁን አሳዩን 🙏።
@etconp
C - stands for concrete strength class
M- stands for MIX
Concrete strength’ሁን የሚያገኘው ከ mix design ነው።
M30 signifies that a CUBE of size
15cm x 15 cm x 15cm made of cement ( Portland cement) + sand ( fine aggregate) + gravel ( coarse aggregate) in such ratio that is characteristic strength (𝑓𝑐𝑘) is 30N/mm² after 28days of curing , whereas C30 symbolizes a CYLINDRICAL sample in which cement ( Portland cement ) + fine aggregate ( sand) + gravel( coarse aggregate) are mixed in such ratio that’s characteristic strength (𝑓𝑐𝑘) after 28 days of curing is 30N/mm² .
Let’s see the conversion
Strength of cylinder sample= 0.8 x strength of cube
Example M20 is equivalent to to C16 and M20 is equivalent to 20
Standard
➪ Cube size as I mentioned
15cmx 15cm x15cm
➪ cylinder size
15 cm diameter x 30 cm height
PSI stands for pounds per square inch
1 PSI= 0.00689 MPA
#watermark
#share
ይህን በማጋራት አጋርነታችሁን አሳዩን 🙏።
@etconp
Telegram
Ethio Construction Engineering
🔨 World Construction Engineering
Latest updates, tips, and tutorials on building, civil engineering, and construction in World.
Learn, build, and grow with us!
📨 @Philemona7 Or @ETCONpBOT
For Ad:- https://telega.io/c/etconp
Latest updates, tips, and tutorials on building, civil engineering, and construction in World.
Learn, build, and grow with us!
📨 @Philemona7 Or @ETCONpBOT
For Ad:- https://telega.io/c/etconp
❤1
@ETCONp Draw Beam .Zip
2.3 MB
👉ውድ የ ቻናላችን ቤተሰቦች ዛሬ ደሞ ከ ኤክስኤል የ ቢም ስትራክቸራል ድሮዊንግ በ ኣውቶ ካድ የሚስልልን ምርጥ ኣፕ ነው።
.
⚡️This is an application that draws structural drawings of beams on AutoCAD from excel.
.
📐ሼር በማረግ ለወዳጅዎ ያጋሩ።
@etconp
.
⚡️This is an application that draws structural drawings of beams on AutoCAD from excel.
.
📐ሼር በማረግ ለወዳጅዎ ያጋሩ።
@etconp
Quiz for architecture students
In this collage (collection of pictures) 👆🏾👆🏾there are four types of architectural style . What type of architectural style is used in picture 3?
1. Modern architecture
2. Gothic architecture
3. Renaissance architecture
4. Medieval architecture
5. Islamic architecture
NB:- As you all know we have posted about las Lajas sanctuary ⛪️ on 12th of april 2020GC and in that picture we have mentioned the style of architecture.
https://t.me/ETCONP/2928
እንደምታውቁት በ April 12 - 2020 እአአ ስለ Las lajas ቤተመቅደስ ስነ ህንፃ ዘይቤ post አርገንላችው ነበር።
https://t.me/ETCONP/2928
If 100 people participate on this question we will share you three lecture notes regarding history of architecture
በዚህ ጥያቄ 100 ሰዎች ከተሳተፉ 3 lecture note ስለ history of architecture እንለቅላቸዋለን። ባታውቁትም ተሳተፉ
#share #participate
@etconp
In this collage (collection of pictures) 👆🏾👆🏾there are four types of architectural style . What type of architectural style is used in picture 3?
1. Modern architecture
2. Gothic architecture
3. Renaissance architecture
4. Medieval architecture
5. Islamic architecture
NB:- As you all know we have posted about las Lajas sanctuary ⛪️ on 12th of april 2020GC and in that picture we have mentioned the style of architecture.
https://t.me/ETCONP/2928
እንደምታውቁት በ April 12 - 2020 እአአ ስለ Las lajas ቤተመቅደስ ስነ ህንፃ ዘይቤ post አርገንላችው ነበር።
https://t.me/ETCONP/2928
If 100 people participate on this question we will share you three lecture notes regarding history of architecture
በዚህ ጥያቄ 100 ሰዎች ከተሳተፉ 3 lecture note ስለ history of architecture እንለቅላቸዋለን። ባታውቁትም ተሳተፉ
#share #participate
@etconp
@etconp histrory of architeure.pdf
2 MB
HISTORY OF ARCHITECTURE
➪ Greek architecture
➪ Doric order
➪ Ionic order
➪ Corinthian order
➪ Tuscan order
Etc......
#lecturenotes
#historyofarchitecture
@etconp
➪ Greek architecture
➪ Doric order
➪ Ionic order
➪ Corinthian order
➪ Tuscan order
Etc......
#lecturenotes
#historyofarchitecture
@etconp
@etconp history of architeture I module.pdf
565.8 KB
History of architecture
Outline of presentation
1. Introduction to courses
2. Introduction to architecture and history of architecture
3. Introduction to materials, system and technologies
#lecturenote
#history of architecture
@etconp
Outline of presentation
1. Introduction to courses
2. Introduction to architecture and history of architecture
3. Introduction to materials, system and technologies
#lecturenote
#history of architecture
@etconp
@etconp history of architeturei.pdf
2.5 MB
History of architecture and built environment-I
This lecture starts with defining what history is & what architecture is .
@etconp
This lecture starts with defining what history is & what architecture is .
@etconp
This media is not supported in your browser
VIEW IN TELEGRAM
Automated car 🚗 🚙 🚘 parking systems in Germany 🇩🇪
Automated car parking system(APS) is a mechanical system designed to minimize the area and / or volume required for parking cars. Like a multistory parking garage, an APS ,provides parking for cars on multiple levels stacked vertically to maximize the number of parking spaces while minimizing land usage.
Source:- en.wikipidia.org/wiki/automated_parking_system
እኛም ሀገር የ parking ህንፃ መገናኛ አካባቢ ከዘፍመሽ grand mall ወደጎን በስተቀኝ በኩል እና መርካቶ ከ አንዋር መስጊድ ፊትለፊት automated car parking system (APS) ሙሉ በሙሉ በ ብረት የተሰራ (steel structure) የሆነ አለ። ይህም በአፍሪካ የመጀመሪያ ያደርገዋል።
በ መገናኛ የሚገኘው የ parking ህንፃ 52 ሚልየን ብር ወቶበታል።
ምንጭ ፡ - https://youtu.be/B2H1VzH-fXI
ሌላ የ parking ህንፃ ኢሊሌ ሆቴል ካዛንቺስ የ parking ህንፃ ገንብቷል ነገር ግን automated car parking system አይደለም።
@etconp
Automated car parking system(APS) is a mechanical system designed to minimize the area and / or volume required for parking cars. Like a multistory parking garage, an APS ,provides parking for cars on multiple levels stacked vertically to maximize the number of parking spaces while minimizing land usage.
Source:- en.wikipidia.org/wiki/automated_parking_system
እኛም ሀገር የ parking ህንፃ መገናኛ አካባቢ ከዘፍመሽ grand mall ወደጎን በስተቀኝ በኩል እና መርካቶ ከ አንዋር መስጊድ ፊትለፊት automated car parking system (APS) ሙሉ በሙሉ በ ብረት የተሰራ (steel structure) የሆነ አለ። ይህም በአፍሪካ የመጀመሪያ ያደርገዋል።
በ መገናኛ የሚገኘው የ parking ህንፃ 52 ሚልየን ብር ወቶበታል።
ምንጭ ፡ - https://youtu.be/B2H1VzH-fXI
ሌላ የ parking ህንፃ ኢሊሌ ሆቴል ካዛንቺስ የ parking ህንፃ ገንብቷል ነገር ግን automated car parking system አይደለም።
@etconp
👉Building construction @ETCONp
.
▶️Definitions of terms Of Masonry👇
.
1. Course : A course is a horizontal layer of bricks stones
2. Bed : the surface of a stone perpendicular to the line of pressure of (lower surface of bricks or stones in each course)
3. Back : The inner surface of wall not exposed is called back.
The material forming back is known as backing
4. Face : The exterior of the wall exposed to weather is known
as face. The material used in the facing of wall is known as
facing
5. Hearting : It is the interior portion of a wall between facing
and backing
6. Head : It is a brick or stone, which lies with its greatest length at right angles to the face of the work.
7. Stretcher : It is a brick or a stone which lies with its congest
side parallel to the face of the work
8. Bond : The method of arranging bricks so that the individual units are tied together
9. Spalls : The chips of stones used for filling the interstices in
stone masonry
10. Quoins : The stones used for the corners of walls of structure
11. Bat : It is a portion of a brick cut across the width.
12. Closer: It is the portion of a brickcut in such a manner that its one long face remains uncut
13. Queen closer: it is the portion of a brick obtained by cutting a brick length-wise into two portions
14. King closer: It is the portion of brick obtained by cutting off
the triangular piece between the centre of one end and the
centre of one side.
15. Bevelled closer: It is the portion of a brick in which the
whole length of the brick is bevelled for maintaining half
width at one end and full width at the other
16. Frog : It is an indentation or depression on the top face of a
brick made with the object of forming a key for the mortar.
17. Sill : It is a horizontal stone, concrete or wood, employed for
the purpose of shedding off rain water from the face of wall
immediately below the window opening
18. Corbel : It is the extension of one or more course of stone or
brick from the face of a wall to serve as a support for wall
plates
19. Templates : Pieces of stones placed under the end of a beam
to distribute load over a greater area.
20. Coping : It is the course placed upon the exposed top of an external wall to prevent the seepage of water
21. Buttress : It is a sloping or stepped masonry projection from a tall wall intended to strengthen the wall against the thrust of a roof
.
#BuildingConstruction
#Masonary
.
🚧ወደ መወያያ ግሩፓችን ለመቀላቀል ከታች ባለው ሊንክ ተጭነው ይቀላቀሉን...
.
👇👇👇👇
http://t.me/COTMp
.
▶️Definitions of terms Of Masonry👇
.
1. Course : A course is a horizontal layer of bricks stones
2. Bed : the surface of a stone perpendicular to the line of pressure of (lower surface of bricks or stones in each course)
3. Back : The inner surface of wall not exposed is called back.
The material forming back is known as backing
4. Face : The exterior of the wall exposed to weather is known
as face. The material used in the facing of wall is known as
facing
5. Hearting : It is the interior portion of a wall between facing
and backing
6. Head : It is a brick or stone, which lies with its greatest length at right angles to the face of the work.
7. Stretcher : It is a brick or a stone which lies with its congest
side parallel to the face of the work
8. Bond : The method of arranging bricks so that the individual units are tied together
9. Spalls : The chips of stones used for filling the interstices in
stone masonry
10. Quoins : The stones used for the corners of walls of structure
11. Bat : It is a portion of a brick cut across the width.
12. Closer: It is the portion of a brickcut in such a manner that its one long face remains uncut
13. Queen closer: it is the portion of a brick obtained by cutting a brick length-wise into two portions
14. King closer: It is the portion of brick obtained by cutting off
the triangular piece between the centre of one end and the
centre of one side.
15. Bevelled closer: It is the portion of a brick in which the
whole length of the brick is bevelled for maintaining half
width at one end and full width at the other
16. Frog : It is an indentation or depression on the top face of a
brick made with the object of forming a key for the mortar.
17. Sill : It is a horizontal stone, concrete or wood, employed for
the purpose of shedding off rain water from the face of wall
immediately below the window opening
18. Corbel : It is the extension of one or more course of stone or
brick from the face of a wall to serve as a support for wall
plates
19. Templates : Pieces of stones placed under the end of a beam
to distribute load over a greater area.
20. Coping : It is the course placed upon the exposed top of an external wall to prevent the seepage of water
21. Buttress : It is a sloping or stepped masonry projection from a tall wall intended to strengthen the wall against the thrust of a roof
.
#BuildingConstruction
#Masonary
.
🚧ወደ መወያያ ግሩፓችን ለመቀላቀል ከታች ባለው ሊንክ ተጭነው ይቀላቀሉን...
.
👇👇👇👇
http://t.me/COTMp
Telegram
ETCONp Discussion
📩ለማነኛውም ሀሳብ እና አስተያየት @Philemona7
✌️ይህ የ @etconp መወያያ ግሩፓቹ ነው።
✋This is discussion group of @ETCONpWORK
.
🔖ማሳሰብያ ...
.
⚡️ግሩፑ ላይ ማነኛውም ከ ኮንስትራክሽን ጉዳዮች ውጪ መለጠፍ በፍፁም አይፈቀድም!
@ETCONpBOT ፃፉልን እናመሰግናለን🙏
✌️ይህ የ @etconp መወያያ ግሩፓቹ ነው።
✋This is discussion group of @ETCONpWORK
.
🔖ማሳሰብያ ...
.
⚡️ግሩፑ ላይ ማነኛውም ከ ኮንስትራክሽን ጉዳዮች ውጪ መለጠፍ በፍፁም አይፈቀድም!
@ETCONpBOT ፃፉልን እናመሰግናለን🙏
👍1
Automatic REBAR TYING MACHINE
Trying the rebar together can be a time-consuming and laborious job. Most contractors are forced to hand tie them individually after they’ve mounted the rebar structure.
I want to Thank Abebaw for sharing this picture to us.
ይህ የምትመለከቱት machine ብረት ከብረት ጋር ለማሰር የሚጠቅም automatic machine ነው። ይህ ማለት የጉጠትን ስራ ተክቶ ሚሰራልን እጅግ ዘመናዊ machine ነው።
እስኪ እኛ ሀገር ይህ በስፋት ቢስፋፋ የ project’ዎች መርሐ ግብር ላይ( project schedule) ላይ የሚኖረውን አዎንታዊ ተፅዕኖ አስቡት።
ይህን ምስል ላጋራን አበባው ምስጋናችን ይድረሰው።
We got some video to share you showing how this machine operates.
ይህን machine በተመለከተ machine’ሁ እንዴት እንደሚሰራ የሚያሳይ video እንለቅላችኋለን። የግንባታ እቃ አቅራቢዎቻችን ይህን machine ቢመጣ ለ construction industry’ው እጅግ የላቀ ጥቅም አለው እንላለን።
@etconp
Trying the rebar together can be a time-consuming and laborious job. Most contractors are forced to hand tie them individually after they’ve mounted the rebar structure.
I want to Thank Abebaw for sharing this picture to us.
ይህ የምትመለከቱት machine ብረት ከብረት ጋር ለማሰር የሚጠቅም automatic machine ነው። ይህ ማለት የጉጠትን ስራ ተክቶ ሚሰራልን እጅግ ዘመናዊ machine ነው።
እስኪ እኛ ሀገር ይህ በስፋት ቢስፋፋ የ project’ዎች መርሐ ግብር ላይ( project schedule) ላይ የሚኖረውን አዎንታዊ ተፅዕኖ አስቡት።
ይህን ምስል ላጋራን አበባው ምስጋናችን ይድረሰው።
We got some video to share you showing how this machine operates.
ይህን machine በተመለከተ machine’ሁ እንዴት እንደሚሰራ የሚያሳይ video እንለቅላችኋለን። የግንባታ እቃ አቅራቢዎቻችን ይህን machine ቢመጣ ለ construction industry’ው እጅግ የላቀ ጥቅም አለው እንላለን።
@etconp
Ethio Construction Engineering
Automatic REBAR TYING MACHINE Trying the rebar together can be a time-consuming and laborious job. Most contractors are forced to hand tie them individually after they’ve mounted the rebar structure. I want to Thank Abebaw for sharing this picture to us.…
This media is not supported in your browser
VIEW IN TELEGRAM
Automatic REBAR TYING MACHINE
Trying the rebar together can be a time-consuming and laborious job. Most contractors are forced to hand tie them individually after they’ve mounted the rebar structure.
ይህ የምትመለከቱት machine ብረት ከብረት ጋር ለማሰር የሚጠቅም automatic machine ነው። ይህ ማለት የጉጠትን ስራ ተክቶ ሚሰራልን እጅግ ዘመናዊ machine ነው።
እስኪ እኛ ሀገር ይህ በስፋት ቢስፋፋ የ project’ዎች መርሐ ግብር ላይ( project schedule) ላይ የሚኖረውን አዎንታዊ ተፅዕኖ አስቡት።
@etconp
Trying the rebar together can be a time-consuming and laborious job. Most contractors are forced to hand tie them individually after they’ve mounted the rebar structure.
ይህ የምትመለከቱት machine ብረት ከብረት ጋር ለማሰር የሚጠቅም automatic machine ነው። ይህ ማለት የጉጠትን ስራ ተክቶ ሚሰራልን እጅግ ዘመናዊ machine ነው።
እስኪ እኛ ሀገር ይህ በስፋት ቢስፋፋ የ project’ዎች መርሐ ግብር ላይ( project schedule) ላይ የሚኖረውን አዎንታዊ ተፅዕኖ አስቡት።
@etconp
topic ~ Geotechnical engineering
Q] what is value of shrinkage limit if dry unit weight of soil is 19.62KN/m^3 and specific gravity is given as 2.5 @ETCONP
Q] what is value of shrinkage limit if dry unit weight of soil is 19.62KN/m^3 and specific gravity is given as 2.5 @ETCONP
Anonymous Quiz
17%
0.15
30%
0.20
41%
0.25
13%
0.10
Ethio Construction Engineering
matdesign@etconp.pdf
This media is not supported in your browser
VIEW IN TELEGRAM
Casting concrete for mat foundation
how to construct a raft or mat foundation
A raft foundation is constructed by first excavating the ground to a uniform, flat level.
Then, a waterproof plastic sheet is laid over the earth, and a thin 3" layer of plain cement concrete (PCC) is poured just to create a perfectly flat and level base for the foundation.
After this, a waterproofing layer is installed, and then reinforcement steel for the raft slab is tied in place. After all the steel has been put in place, concrete is poured to the desired thickness, which is usually in the range of 200mm (8") to 300mm (12") thick for small buildings: this can be much thicker if heavy loads are to be carried.
Source:- understand construction
Mat foundation ወፍራም slab ብላችው አስቡት እንደ isolated footing አይነት ሆኖ ከላይ እና ከታች (dounble reinforced foundation structure ) ነው።
ይህን አይነት foundation የምንመርጥበት ብዙ ምክንያቶች አሉ ለምሳሌ :- የከረሰምድር ውሃ ግፊት, footing'ሁ ከ70% በላይ ይዞታ ካለው stress overlapእንዳይኖር mat foundation እንመርጣለን ወዘተ.....
@etconp
how to construct a raft or mat foundation
A raft foundation is constructed by first excavating the ground to a uniform, flat level.
Then, a waterproof plastic sheet is laid over the earth, and a thin 3" layer of plain cement concrete (PCC) is poured just to create a perfectly flat and level base for the foundation.
After this, a waterproofing layer is installed, and then reinforcement steel for the raft slab is tied in place. After all the steel has been put in place, concrete is poured to the desired thickness, which is usually in the range of 200mm (8") to 300mm (12") thick for small buildings: this can be much thicker if heavy loads are to be carried.
Source:- understand construction
Mat foundation ወፍራም slab ብላችው አስቡት እንደ isolated footing አይነት ሆኖ ከላይ እና ከታች (dounble reinforced foundation structure ) ነው።
ይህን አይነት foundation የምንመርጥበት ብዙ ምክንያቶች አሉ ለምሳሌ :- የከረሰምድር ውሃ ግፊት, footing'ሁ ከ70% በላይ ይዞታ ካለው stress overlapእንዳይኖር mat foundation እንመርጣለን ወዘተ.....
@etconp
Ethio Construction Engineering
topic ~ Geotechnical engineering
Q] what is value of shrinkage limit if dry unit weight of soil is 19.62KN/m^3 and specific gravity is given as 2.5 @ETCONP
Q] what is value of shrinkage limit if dry unit weight of soil is 19.62KN/m^3 and specific gravity is given as 2.5 @ETCONP
Solution for the question
Atterbergs limit
1. Shrinkage limit
2. Plastic limit test
3. Liquid limit
Tap instant view and check the answer
Instant view ማለት ሌላ website አይደለም ፈጣን እይታ ማለት ነው።
https://telegra.ph/shrinkage-limit-05-16
CHECK SOLUTION!
Atterbergs limit
1. Shrinkage limit
2. Plastic limit test
3. Liquid limit
Tap instant view and check the answer
Instant view ማለት ሌላ website አይደለም ፈጣን እይታ ማለት ነው።
https://telegra.ph/shrinkage-limit-05-16
CHECK SOLUTION!
Telegraph
shrinkage limit
following are three atterbergs limits 1) shrinkage limit2) plastic limit 3) liquid limit > beyond shrinkage limit volume doesn't reduce, it remains constant. > Shrinkage limit is computed by following formula 1) 2) Ws = 1/R - 1/G R = dry unit weight = Yd/Yw…