The site is located near the center of Tokyo. It is a small 44m² corner plot bounded by two streets. Conforming to legal conditions and in response to the client’s wish for a ‘roofed garage’ the volume was trimmed from various directions. Using the words ‘Mineral’ and ‘reflection’ as guiding concepts, Atelier Tekuto proceeded to use subtraction as a positive tool for design.
REFLECTION
By controlling geometries (facets with three factors: transparent, translucent and opaque) and entangling them in a three-dimensional way inside the internal space, visual reflection is induced. This results in a deviation from the restrictiveness of space.
MINERAL
Minerals are phenomena that combine abstract properties (conceptual objects) with nonfigurative properties (objects whose presence of matter is more tangible). Changes from transparent to translucent to opaque occur according to light intensity and angle. The mineral body cannot be regarded as a simple element.
Source:- archidaily
@etconp
REFLECTION
By controlling geometries (facets with three factors: transparent, translucent and opaque) and entangling them in a three-dimensional way inside the internal space, visual reflection is induced. This results in a deviation from the restrictiveness of space.
MINERAL
Minerals are phenomena that combine abstract properties (conceptual objects) with nonfigurative properties (objects whose presence of matter is more tangible). Changes from transparent to translucent to opaque occur according to light intensity and angle. The mineral body cannot be regarded as a simple element.
Source:- archidaily
@etconp
“In Europe,” Jurrian Knijtijzer says, “architecture is responsible for 36% of carbon emissions.”
Pointing to the high carbon footprint of concrete, the wastefulness involved with keeping buildings up and running, and the short lifecycle of many structures, he says, of conventional architecture, “we build wrong, we operate wrong, and we demolish wrong.”
He turned to cross-laminated timber (CLT), a type of engineered, prefabricated, and sustainably sourced wood. Not only does Finch prevent the use of concrete, a material with a high carbon footprint, it also captures carbon with its CLT product.
source: https://www.architecturaldigest.com
By: @wintaassefa for @ETCONp
Pointing to the high carbon footprint of concrete, the wastefulness involved with keeping buildings up and running, and the short lifecycle of many structures, he says, of conventional architecture, “we build wrong, we operate wrong, and we demolish wrong.”
He turned to cross-laminated timber (CLT), a type of engineered, prefabricated, and sustainably sourced wood. Not only does Finch prevent the use of concrete, a material with a high carbon footprint, it also captures carbon with its CLT product.
source: https://www.architecturaldigest.com
By: @wintaassefa for @ETCONp
Ethio Construction Engineering via @like
What is the active earth pressure for a soil of height 3 meters , unit weight of 30KN/m³ the angle of internal friction (φ) =30 ⁰? 1. 15KN 2. 20KN 3. 25KN 4 . 30KN #share this question @etconp
Telegram
Ethio Construction Engineering
🔨 World Construction Engineering
Latest updates, tips, and tutorials on building, civil engineering, and construction in World.
Learn, build, and grow with us!
📨 @Philemona7 Or @ETCONpBOT
For Ad:- https://telega.io/c/etconp
Latest updates, tips, and tutorials on building, civil engineering, and construction in World.
Learn, build, and grow with us!
📨 @Philemona7 Or @ETCONpBOT
For Ad:- https://telega.io/c/etconp
Surveying quiz
A vertical crest with length of 4ft and forward tangent of -2% and backward of 1%. What’s the approximate tangent offset of PVI(point of vertical intersection) ?
1. 3.0ft
2. 1.5ft
3. 3.6ft
4. 1.8ft
NB:- it’s FPS system
1 meter = 3.28 feet
1 centimeter =0.394 inch
1 inch = 2.54 centimeters
@etconp
A vertical crest with length of 4ft and forward tangent of -2% and backward of 1%. What’s the approximate tangent offset of PVI(point of vertical intersection) ?
1. 3.0ft
2. 1.5ft
3. 3.6ft
4. 1.8ft
NB:- it’s FPS system
1 meter = 3.28 feet
1 centimeter =0.394 inch
1 inch = 2.54 centimeters
@etconp
👍1
Ethio Construction Engineering via @like
Surveying quiz A vertical crest with length of 4ft and forward tangent of -2% and backward of 1%. What’s the approximate tangent offset of PVI(point of vertical intersection) ? 1. 3.0ft 2. 1.5ft 3. 3.6ft 4. 1.8ft NB:- it’s FPS system 1 meter = 3.28…
Answer of this question 👆🏾👆🏾
➪ a= g1-g2 = -2-1 = -3/8
2L 2 x4
➪ E =a(L/2)² =-3/8(4/2)² =1.5 feet
So the answer is 2
#share
#watermark
@etconp
➪ a= g1-g2 = -2-1 = -3/8
2L 2 x4
➪ E =a(L/2)² =-3/8(4/2)² =1.5 feet
So the answer is 2
#share
#watermark
@etconp
Telegram
Ethio Construction Engineering
🔨 World Construction Engineering
Latest updates, tips, and tutorials on building, civil engineering, and construction in World.
Learn, build, and grow with us!
📨 @Philemona7 Or @ETCONpBOT
For Ad:- https://telega.io/c/etconp
Latest updates, tips, and tutorials on building, civil engineering, and construction in World.
Learn, build, and grow with us!
📨 @Philemona7 Or @ETCONpBOT
For Ad:- https://telega.io/c/etconp
Factor of safety is the ratio of
1. Yield stress to working stress
2. Working stress to yield stress
3. Bearing stress to yield stress
4. Yield stress to bearing stress
To get the answer updated your telegram
@etconp
1. Yield stress to working stress
2. Working stress to yield stress
3. Bearing stress to yield stress
4. Yield stress to bearing stress
To get the answer updated your telegram
@etconp
Ethio Construction Engineering via @like
Factor of safety is the ratio of 1. Yield stress to working stress 2. Working stress to yield stress 3. Bearing stress to yield stress 4. Yield stress to bearing stress To get the answer updated your telegram @etconp
Factor of safety is the ratio of
Anonymous Quiz
60%
Yield stress to working stress
28%
Working stress to yield stress
6%
Bearing stress to yield stress
6%
Yield stress to bearing stress
Fluid mechanics:
what is the value of apparent weight measured in oil bucket (s =0.8) for a body weighing 100KN in air. dimensions of body are 2*2*2 m [take g = 10 m/sec^2 ] @encop
what is the value of apparent weight measured in oil bucket (s =0.8) for a body weighing 100KN in air. dimensions of body are 2*2*2 m [take g = 10 m/sec^2 ] @encop
Anonymous Quiz
12%
30 KN
46%
32 KN
36%
36 KN
6%
38 KN
Ethio Construction Engineering
Fluid mechanics:
what is the value of apparent weight measured in oil bucket (s =0.8) for a body weighing 100KN in air. dimensions of body are 2*2*2 m [take g = 10 m/sec^2 ] @encop
what is the value of apparent weight measured in oil bucket (s =0.8) for a body weighing 100KN in air. dimensions of body are 2*2*2 m [take g = 10 m/sec^2 ] @encop
Answer for this this question 👆🏾👆🏾👆🏾
Fluid mechanics
Tap instant view to see the calculation
https://telegra.ph/apparent-weight-concept-05-18
Fluid mechanics
Tap instant view to see the calculation
https://telegra.ph/apparent-weight-concept-05-18
Telegraph
apparent weight concept @etconp
> Apparent weight is always less than the true weight [provided the density of the body is more than the density of fluid measured for apparent weight] > in our case density of body = 100*1000/10*2*2*2 = 1250kg/m^3> as you can see the density of the body…
How many redundant forces will be in a simple beam which is fixed support on one end and roller support on the other end ?
1. 3
2. 2
3. 1
4. 4
#participate
መልስ በመለሳችው ቅፅበት ትክክለኛ መልስ እንዲያሳያችው telegram’አችሁን update አርጉ።
@etconp
1. 3
2. 2
3. 1
4. 4
#participate
መልስ በመለሳችው ቅፅበት ትክክለኛ መልስ እንዲያሳያችው telegram’አችሁን update አርጉ።
@etconp
Ethio Construction Engineering via @like
How many redundant forces will be in a simple beam which is fixed support on one end and roller support on the other end ? 1. 3 2. 2 3. 1 4. 4 #participate መልስ በመለሳችው ቅፅበት ትክክለኛ መልስ እንዲያሳያችው telegram’አችሁን update አርጉ። @etconp
How many redundant forces will be in a simple beam which is fixed support on one end and roller support on the other end?
Anonymous Quiz
30%
1
30%
2
25%
3
15%
4
Name this test ?
1. Slump test
2. Compressive strength test of concrete
3. Hammer test
4. Cubic test of concrete
#share
#participate
@etconp
1. Slump test
2. Compressive strength test of concrete
3. Hammer test
4. Cubic test of concrete
#share
#participate
@etconp
Ethio Construction Engineering via @like
What is being constructed ?👆🏾👆🏾 1. Cesspool 2. Septic tank 3. Swimming pool 🏊♀️ 4. All @etconp
The answer is 2
Different between a septic tank and a Cesspool:
Septic Tank- A tank in which waste matter is decomposed through bacterial action. It is a watertight box usually made of reinforced fiberglass or precast concrete blocks. It has two essential parts. The septic tank and The soil absorption area.
1. Organic solid materials floats to the surface and foams a layer of which is commonly called Scum.
2. Inert solid materials and the by-products of bacterial digestion sink to the bottom of the tank and from a layer is called as sludge.
Cesspool- It is a cylindrical excavation with an open bottom and wall lined with unmortared stone or concrete block. The soils are settled deep inside the base of the cesspool while the liquid percolates into the soil through the concrete.
Source :- lecture material
@etconp
Different between a septic tank and a Cesspool:
Septic Tank- A tank in which waste matter is decomposed through bacterial action. It is a watertight box usually made of reinforced fiberglass or precast concrete blocks. It has two essential parts. The septic tank and The soil absorption area.
1. Organic solid materials floats to the surface and foams a layer of which is commonly called Scum.
2. Inert solid materials and the by-products of bacterial digestion sink to the bottom of the tank and from a layer is called as sludge.
Cesspool- It is a cylindrical excavation with an open bottom and wall lined with unmortared stone or concrete block. The soils are settled deep inside the base of the cesspool while the liquid percolates into the soil through the concrete.
Source :- lecture material
@etconp
Telegram
Ethio Construction Engineering
🔨 World Construction Engineering
Latest updates, tips, and tutorials on building, civil engineering, and construction in World.
Learn, build, and grow with us!
📨 @Philemona7 Or @ETCONpBOT
For Ad:- https://telega.io/c/etconp
Latest updates, tips, and tutorials on building, civil engineering, and construction in World.
Learn, build, and grow with us!
📨 @Philemona7 Or @ETCONpBOT
For Ad:- https://telega.io/c/etconp
In compression mild steel has yield stress (in N/mm^2)
Anonymous Quiz
32%
263
41%
250
20%
415
7%
186