Forwarded from ERMIAS T
KMSAuto net@freecodecs.zip
5.5 MB
KMS for Windows 7/8/10 is a great activator tool that will use to activate your Windows or Office activation. So, you must activate to unlock these premium features which are available. KMS auto can help you to activate your OS and Office. It can make the premium version of Windows or Office.
✅ activated✅
✅ activated✅
30 St Mary Axe (known previously as the Swiss Re Building), informally known as The Gherkin
➪ Commercial skyscraper in London UK 🇬🇧
➪ It was completed in December 2003 and opened in April 2004.
➪ With 41 floors, it is 180 metres (591 ft) tall
➪ cost:- £138 million (plus land cost of £90.6 million)
adjusted for inflation: £230 million (plus land cost of £161 million)
➪ owner :- Safra Group
➪ Roof :- 180 metres (591 ft)
➪ Floor count:- 41
➪ Architect:- Foster + partners
➪ Structural Engineer :- Arup
➪ main contractor:- Skanska
The tower is aerodynamically designed to reduce wind load on the structure, whilst the lower part tapers so that wind wraps around the tower.
The building has a steel frame and a glass facade with diamond-shaped panels
Do you want us to post some video how to model this building using sketch up?
ይህን ህንፃ በ sketch up የተሰራ model video ትፈልጋላችሁ?
@etconp
➪ Commercial skyscraper in London UK 🇬🇧
➪ It was completed in December 2003 and opened in April 2004.
➪ With 41 floors, it is 180 metres (591 ft) tall
➪ cost:- £138 million (plus land cost of £90.6 million)
adjusted for inflation: £230 million (plus land cost of £161 million)
➪ owner :- Safra Group
➪ Roof :- 180 metres (591 ft)
➪ Floor count:- 41
➪ Architect:- Foster + partners
➪ Structural Engineer :- Arup
➪ main contractor:- Skanska
The tower is aerodynamically designed to reduce wind load on the structure, whilst the lower part tapers so that wind wraps around the tower.
The building has a steel frame and a glass facade with diamond-shaped panels
Do you want us to post some video how to model this building using sketch up?
ይህን ህንፃ በ sketch up የተሰራ model video ትፈልጋላችሁ?
@etconp
Ethio Construction Engineering via @like
Surveying quiz Compute the angle between the lines AB and AC if the respective bearings are 52⁰30’ and 328⁰45’ 1. 276⁰15’ 2. 111⁰15’ 3. 6⁰15’ 4. 83⁰45’ #participate #surveying #bearing #azimuthal @etconp
Solution of this question 👆🏾👆🏾👆🏾
Angle between AB and AC
= 52⁰30’ + 360⁰ - 328⁰45’
= 83⁰ 45’
So the answer is 4️⃣
@etconp
Angle between AB and AC
= 52⁰30’ + 360⁰ - 328⁰45’
= 83⁰ 45’
So the answer is 4️⃣
@etconp
Waste water engineering
Sludge Treatment
🔸 Sludge Treatment is aimed to achieve volume reduction & strength reduction.
🔸 Volume & strength reduction of sludges are achieved by
👉 sludge Thickening :- By concentrating the sludge by expulsion of water.
👉 Sludge digestion :- By anaerobic decomposition to reduce strength.
👉 Sludge conditioning :- To improve drainblility of sludges
👉 Sludge dewatering and drying :- Remove remaining moisture from sludge.
♦️ Strength reduction
👉 Strength reduction of sludge i.e. BOD removal is carried out by anaerobic decomposition known sludge digestion.
👉 Sludge digestion occur in two stages i.e.**Acids fermentation and Methane fermentation.**
🔸 Sludge digester
👉 Sludge are anaerobically digested by using a reactor known as sludge digester.
👉 Diameter of tank :- 3 to 60m
👉 Height of tank :- 6 to 12m
👉 Digestion period depends upon type of microorganisms
~ mesophilic organisms :- 30 to 60 days (Temperature 20℃ - 40℃)
~ Thermophilic organisms :- 15 to 25 days (Temperature 45℃ - 60℃)
👉 Gas production
~ 70% Methane
~ 30% Carbon dioxide
👉 Calorific value (energy content) :- 5200 to 5800 kcal/m3 of CH4
🔸 Digested sludge are dewatered and dried by using solar drying beds known as sludge drying bed.
🔸 Elutriation :- Washing of sludge before dewatering by mechanical driers.
@ce_gk
@ETCONP
Sludge Treatment
🔸 Sludge Treatment is aimed to achieve volume reduction & strength reduction.
🔸 Volume & strength reduction of sludges are achieved by
👉 sludge Thickening :- By concentrating the sludge by expulsion of water.
👉 Sludge digestion :- By anaerobic decomposition to reduce strength.
👉 Sludge conditioning :- To improve drainblility of sludges
👉 Sludge dewatering and drying :- Remove remaining moisture from sludge.
♦️ Strength reduction
👉 Strength reduction of sludge i.e. BOD removal is carried out by anaerobic decomposition known sludge digestion.
👉 Sludge digestion occur in two stages i.e.**Acids fermentation and Methane fermentation.**
🔸 Sludge digester
👉 Sludge are anaerobically digested by using a reactor known as sludge digester.
👉 Diameter of tank :- 3 to 60m
👉 Height of tank :- 6 to 12m
👉 Digestion period depends upon type of microorganisms
~ mesophilic organisms :- 30 to 60 days (Temperature 20℃ - 40℃)
~ Thermophilic organisms :- 15 to 25 days (Temperature 45℃ - 60℃)
👉 Gas production
~ 70% Methane
~ 30% Carbon dioxide
👉 Calorific value (energy content) :- 5200 to 5800 kcal/m3 of CH4
🔸 Digested sludge are dewatered and dried by using solar drying beds known as sludge drying bed.
🔸 Elutriation :- Washing of sludge before dewatering by mechanical driers.
@ce_gk
@ETCONP
Forwarded from Ethio Construction Engineering (Fîłmøñ Łûël)
Forwarded from Ethio Construction Engineering (Fîłmøñ Łûël)
👉ዛሬ ደሞ ስለ Weir ትንሽ እናካፍላቹ @COTMp
.
*በምስሉ ላይ እንደሚታየው የዊር ዋና አገልግሎት ውሀውን
በምንፈልገው ጥልቀት በመገደብ በላይኛው ተፋሰስ (Upstream side) ውሀው እንዲከማች ማድረግ ነው፡፡
ቀሪውም ውሀ በዊሩ አናት ላይ ወይም በር/ Gate በማዘጋጀት
እንዲፈስ እናደርገዋለን፡፡
➡የዊር ጥቅም
1. Flood Control - የምንፈልገውን ያህል ጥልቀት ውሃውን ስለምንገድበው በታችኛው ተፋሰስ/ Downstream ጎርፍ ይቀንሳል፡፡
2. Flow Measurement - የዊሩ ዳይሜንሽን ስለሚታወቅ
የወንዙን Discharge በቀላሉ ማወቅ እንችላለን፡፡ ((( Q=
CLH^n )))
3. የተጠራቀመውን ውሀ divert በማድረግ ለእርሻና ለተለያዩ
አገልግሎቶች መጠቀም እንችላለን፡፡
4. ወንዙ ለውሃ ላይ ትራንስፖርት አመቺ እንዲሆን ያደርጋል ፣
የተለያዩ የሚሰደዱ የአሳ ዝርያዎችን እንዳያልፉ ይገድባል
ወዘተ..
➡ የዊር ጉዳት
1. የወንዙን ሁኔታ ሙሉ ለሙሉ ይቀይረዋል
2. Siltation
3. አሳዎቹ የመንቀሳቀስ መብታቸውን ይገድባል ... Fish
Ladder ሊያስፈልግ ይችላል፡፡
4. ዊሩ አካባቢ ውሃው የተረጋጋ ቢመስልም ለዋና/
ለትራንስፖርት አስቸጋሪ ቦታ ነው ሀይድሮሊክ ጃምፕም ይኖራል
➡ የዊር አይነቶች
Polynomial, V - notch, Broad Crested, Compound,
Gated/ Ungated, etc.
Polynomial - የዊሩ ቅርፅ በፓሊኖሚያል equation
ስለሚሠራ ነው V- notch : ዊሩ መሀሉ በ V ቅርፅ ተቆርጦ ወጥቷል፡፡ ይህ በመሆኑም በኖርማል ፍሰት ጊዜ ውሃው በዛ ይፈሳል:: በቅርፁም ምክ/ት discharge ለማግኘት ይቀለናል፡፡ ፎቶው ኮመንት መስጫው ላይ አለ Broad Crested - ጠፍጣፋ የሆነ አናት ወይም flat crest አለው፡፡ በፎቶ የሚታየው እሡ ነው
Compound : የተለያዩ የዊር አይነቶችን አንድ ላይ የያዘ ነው።
ለሁሉም እንዲዳረስ ፖስቶቹን SHARE አድርጉልን።
👇👇👇👇👇
Join for more updates via the link below;
t.me/COTMp
👆👆👆👆👆
.
*በምስሉ ላይ እንደሚታየው የዊር ዋና አገልግሎት ውሀውን
በምንፈልገው ጥልቀት በመገደብ በላይኛው ተፋሰስ (Upstream side) ውሀው እንዲከማች ማድረግ ነው፡፡
ቀሪውም ውሀ በዊሩ አናት ላይ ወይም በር/ Gate በማዘጋጀት
እንዲፈስ እናደርገዋለን፡፡
➡የዊር ጥቅም
1. Flood Control - የምንፈልገውን ያህል ጥልቀት ውሃውን ስለምንገድበው በታችኛው ተፋሰስ/ Downstream ጎርፍ ይቀንሳል፡፡
2. Flow Measurement - የዊሩ ዳይሜንሽን ስለሚታወቅ
የወንዙን Discharge በቀላሉ ማወቅ እንችላለን፡፡ ((( Q=
CLH^n )))
3. የተጠራቀመውን ውሀ divert በማድረግ ለእርሻና ለተለያዩ
አገልግሎቶች መጠቀም እንችላለን፡፡
4. ወንዙ ለውሃ ላይ ትራንስፖርት አመቺ እንዲሆን ያደርጋል ፣
የተለያዩ የሚሰደዱ የአሳ ዝርያዎችን እንዳያልፉ ይገድባል
ወዘተ..
➡ የዊር ጉዳት
1. የወንዙን ሁኔታ ሙሉ ለሙሉ ይቀይረዋል
2. Siltation
3. አሳዎቹ የመንቀሳቀስ መብታቸውን ይገድባል ... Fish
Ladder ሊያስፈልግ ይችላል፡፡
4. ዊሩ አካባቢ ውሃው የተረጋጋ ቢመስልም ለዋና/
ለትራንስፖርት አስቸጋሪ ቦታ ነው ሀይድሮሊክ ጃምፕም ይኖራል
➡ የዊር አይነቶች
Polynomial, V - notch, Broad Crested, Compound,
Gated/ Ungated, etc.
Polynomial - የዊሩ ቅርፅ በፓሊኖሚያል equation
ስለሚሠራ ነው V- notch : ዊሩ መሀሉ በ V ቅርፅ ተቆርጦ ወጥቷል፡፡ ይህ በመሆኑም በኖርማል ፍሰት ጊዜ ውሃው በዛ ይፈሳል:: በቅርፁም ምክ/ት discharge ለማግኘት ይቀለናል፡፡ ፎቶው ኮመንት መስጫው ላይ አለ Broad Crested - ጠፍጣፋ የሆነ አናት ወይም flat crest አለው፡፡ በፎቶ የሚታየው እሡ ነው
Compound : የተለያዩ የዊር አይነቶችን አንድ ላይ የያዘ ነው።
ለሁሉም እንዲዳረስ ፖስቶቹን SHARE አድርጉልን።
👇👇👇👇👇
Join for more updates via the link below;
t.me/COTMp
👆👆👆👆👆
Telegram
ETCONp Discussion
📩ለማነኛውም ሀሳብ እና አስተያየት @Philemona7
✌️ይህ የ @etconp መወያያ ግሩፓቹ ነው።
✋This is discussion group of @ETCONpWORK
.
🔖ማሳሰብያ ...
.
⚡️ግሩፑ ላይ ማነኛውም ከ ኮንስትራክሽን ጉዳዮች ውጪ መለጠፍ በፍፁም አይፈቀድም!
@ETCONpBOT ፃፉልን እናመሰግናለን🙏
✌️ይህ የ @etconp መወያያ ግሩፓቹ ነው።
✋This is discussion group of @ETCONpWORK
.
🔖ማሳሰብያ ...
.
⚡️ግሩፑ ላይ ማነኛውም ከ ኮንስትራክሽን ጉዳዮች ውጪ መለጠፍ በፍፁም አይፈቀድም!
@ETCONpBOT ፃፉልን እናመሰግናለን🙏
Important Terminologies of Photogrammetry
1. Vertical photograph: A photograph exposed with the optical axis of the camera coinciding with the direction of gravity or optical axis of the camera held vertical.
2. Tilted Photograph: A photograph taken with the optical axis unintentionally tilted from the vertical by a small amount, usually less than 30.
3. Focal length: The distance from the front nodal point of the lens to the plane of photograph, as the distance Lo in the Figure 1.
4. Exposure Station: The space position of the front nodal point (perspective centre) at the time of exposure, as the point L in the Figure 1.
5. Flying Height: The elevation of aircraft/front nodal point/exposure station at the instant of exposure above mean sea level or any reference datum.
6. Principal point: The point where the perpendicular dropped from the front nodal point meets/strikes the plane of photograph, as the point O in the Figure 1.
7. Nadir Point: The point, where the plumb line dropped from the front nodal point meets the plane of photograph, as the point n, in the Figure 1. It is the point on the photograph vertically beneath the exposure station.
8. Tilt: The angle formed between the optical axis of the camera and the plumb line, as the angle oLn in the Figure 1. It is also the angle which the plane of tilted photograph makes with the plane of vertical photograph.
9. Isocentre: The point where the bisector of angle of tilt meets the plane of photograph, as the point i in the Figure 1.
10. Principal plane: The vertical plane containing the optical axis, as the plane Lno in the Figure 1.
11. Principal Line: The intersection of principal plane with the plane of photograph, as the line ‘no’ in the Figure 1.
12. Axis of symmetry (Isometric parallel): The line in the plane of photograph perpendicular to the principal line and passing through the Isocentre. The axis of tilt is a horizontal line as the line perpendicular to the principal line. The other perpendicular lines are called plate paralles.
13. Crab: The condition caused by the failure to orient the camera with respect to the track of aircraft. In vertical photograph, crab is indicated by the edged of photograph not being parallel to the air base line.
14. Drift: The lateral shift or displacement of the aircraft from its course, due to the action of wind or other causes.
15. Floating mark: A mark seen as occupying a position in the 3 dimensional space formed by the stereoscopic fusion of a pair of vertical photograph and used as a reference mark for examining or measuring the stereoscopic model.
16. Fiducial Mark: Marks located in the middle of the sides of the focal plane opening. These are exposed on the negative when the picture was made
17. Fiducial centre: The point of intersection of straight line of joining opposite Fiducial mark.
18. Air base: The length of line joining two exposure stations.
19. Photo base: It is the distance between the principal points of two adjoining vertical photographs.
20. Dia-positive: A positive print (photograph) on a transparent medium (glass/film).
21. Displacement: Any shift in the position of images on a photograph which does not alter the perspective characteristics of the photograph is called displacement (shift due to tilt of the camera and relief of the objects).
22. Emulsion: A suspension of light sensitive silver salt (especially silver chloride or silver bromide in a colloidal medium usually in gelatin) which is used for containing photographic films, plates and paper.
23. Equivalent vertical photograph: Theoretically, truly vertical photograph taken at same camera station with a camera whose focal length equal to that of camera taking a corresponding tilted photograph.
24. Exposure interval: The time interval between the exposures of successive aerial photographs.
#surveying
Join the channel for study material of civil engineering
@ce_gk
@ETCONP
1. Vertical photograph: A photograph exposed with the optical axis of the camera coinciding with the direction of gravity or optical axis of the camera held vertical.
2. Tilted Photograph: A photograph taken with the optical axis unintentionally tilted from the vertical by a small amount, usually less than 30.
3. Focal length: The distance from the front nodal point of the lens to the plane of photograph, as the distance Lo in the Figure 1.
4. Exposure Station: The space position of the front nodal point (perspective centre) at the time of exposure, as the point L in the Figure 1.
5. Flying Height: The elevation of aircraft/front nodal point/exposure station at the instant of exposure above mean sea level or any reference datum.
6. Principal point: The point where the perpendicular dropped from the front nodal point meets/strikes the plane of photograph, as the point O in the Figure 1.
7. Nadir Point: The point, where the plumb line dropped from the front nodal point meets the plane of photograph, as the point n, in the Figure 1. It is the point on the photograph vertically beneath the exposure station.
8. Tilt: The angle formed between the optical axis of the camera and the plumb line, as the angle oLn in the Figure 1. It is also the angle which the plane of tilted photograph makes with the plane of vertical photograph.
9. Isocentre: The point where the bisector of angle of tilt meets the plane of photograph, as the point i in the Figure 1.
10. Principal plane: The vertical plane containing the optical axis, as the plane Lno in the Figure 1.
11. Principal Line: The intersection of principal plane with the plane of photograph, as the line ‘no’ in the Figure 1.
12. Axis of symmetry (Isometric parallel): The line in the plane of photograph perpendicular to the principal line and passing through the Isocentre. The axis of tilt is a horizontal line as the line perpendicular to the principal line. The other perpendicular lines are called plate paralles.
13. Crab: The condition caused by the failure to orient the camera with respect to the track of aircraft. In vertical photograph, crab is indicated by the edged of photograph not being parallel to the air base line.
14. Drift: The lateral shift or displacement of the aircraft from its course, due to the action of wind or other causes.
15. Floating mark: A mark seen as occupying a position in the 3 dimensional space formed by the stereoscopic fusion of a pair of vertical photograph and used as a reference mark for examining or measuring the stereoscopic model.
16. Fiducial Mark: Marks located in the middle of the sides of the focal plane opening. These are exposed on the negative when the picture was made
17. Fiducial centre: The point of intersection of straight line of joining opposite Fiducial mark.
18. Air base: The length of line joining two exposure stations.
19. Photo base: It is the distance between the principal points of two adjoining vertical photographs.
20. Dia-positive: A positive print (photograph) on a transparent medium (glass/film).
21. Displacement: Any shift in the position of images on a photograph which does not alter the perspective characteristics of the photograph is called displacement (shift due to tilt of the camera and relief of the objects).
22. Emulsion: A suspension of light sensitive silver salt (especially silver chloride or silver bromide in a colloidal medium usually in gelatin) which is used for containing photographic films, plates and paper.
23. Equivalent vertical photograph: Theoretically, truly vertical photograph taken at same camera station with a camera whose focal length equal to that of camera taking a corresponding tilted photograph.
24. Exposure interval: The time interval between the exposures of successive aerial photographs.
#surveying
Join the channel for study material of civil engineering
@ce_gk
@ETCONP
Ethio Construction Engineering via @like
30 St Mary Axe (known previously as the Swiss Re Building), informally known as The Gherkin ➪ Commercial skyscraper in London UK 🇬🇧 ➪ It was completed in December 2003 and opened in April 2004. ➪ With 41 floors, it is 180 metres (591 ft) tall ➪ cost:-…
This media is not supported in your browser
VIEW IN TELEGRAM
30 St Mary Axe (known previously as the Swiss Re Building), informally known as The Gherkin
➪ Commercial skyscraper in London UK 🇬🇧
➪ It was completed in December 2003 and opened in April 2004.
➪ With 41 floors, it is 180 metres (591 ft) tall
➪ cost:- £138 million (plus land cost of £90.6 million)
adjusted for inflation: £230 million (plus land cost of £161 million)
➪ owner :- Safra Group
➪ Roof :- 180 metres (591 ft)
➪ Floor count:- 41
➪ Architect:- Foster + partners
➪ Structural Engineer :- Arup
➪ main contractor:- Skanska
The tower is aerodynamically designed to reduce wind load on the structure, whilst the lower part tapers so that wind wraps around the tower.
The building has a steel frame and a glass facade with diamond-shaped panels
Here is the video how you model it on sketch up
File size:- 7.2MB
የፋይል መጠን ፡ - 7.2MB
@etconp
➪ Commercial skyscraper in London UK 🇬🇧
➪ It was completed in December 2003 and opened in April 2004.
➪ With 41 floors, it is 180 metres (591 ft) tall
➪ cost:- £138 million (plus land cost of £90.6 million)
adjusted for inflation: £230 million (plus land cost of £161 million)
➪ owner :- Safra Group
➪ Roof :- 180 metres (591 ft)
➪ Floor count:- 41
➪ Architect:- Foster + partners
➪ Structural Engineer :- Arup
➪ main contractor:- Skanska
The tower is aerodynamically designed to reduce wind load on the structure, whilst the lower part tapers so that wind wraps around the tower.
The building has a steel frame and a glass facade with diamond-shaped panels
Here is the video how you model it on sketch up
File size:- 7.2MB
የፋይል መጠን ፡ - 7.2MB
@etconp
What’s the name of this test ?
1. Hammer test
2. Compressive test
3. Ultrasonic pulse velocity (VPV)
4. none
#participate
Reference
👉🏿 https://t.me/ETCONP/3442
👉🏿 https://t.me/ETCONP/3495
👉🏿 https://t.me/ETCONP/3530
👉🏿 https://t.me/ETCONP/3090
@etconp
1. Hammer test
2. Compressive test
3. Ultrasonic pulse velocity (VPV)
4. none
#participate
Reference
👉🏿 https://t.me/ETCONP/3442
👉🏿 https://t.me/ETCONP/3495
👉🏿 https://t.me/ETCONP/3530
👉🏿 https://t.me/ETCONP/3090
@etconp
Ethio Construction Engineering via @like
What’s the name of this test ? 1. Hammer test 2. Compressive test 3. Ultrasonic pulse velocity (VPV) 4. none #participate Reference 👉🏿 https://t.me/ETCONP/3442 👉🏿 https://t.me/ETCONP/3495 👉🏿 https://t.me/ETCONP/3530 👉🏿 https://t.me/ETCONP/3090…
Answer for this question is 3️⃣ 👆🏾👆🏾
An ultrasonic pulse velocity (UPV)test is an in-situ, Non destructive test test to check the quality of concrete and natural rocks. In this test, the strength and quality of concrete or rock is assessed by measuring the velocity of an ultrasonic pulse passing through a concrete structure or natural rock formation.
This test is conducted by passing a pulse of ultrasonic through concrete to be tested and measuring the time taken by pulse to get through the structure. Higher velocities indicate good quality and continuity of the material, while slower velocities may indicate concrete with many cracks or voids.
Ultrasonic testing equipment includes a pulse generation circuit, consisting of electronic circuit for generating pulses and a transducer for transforming electronic pulse into mechanical pulse having an oscillation frequency in range of 40 kHz to 50 kHz, and a pulse reception circuit that receives the signal.
𝑃𝑢𝑙𝑠𝑒 𝑣𝑒𝑙𝑜𝑐𝑖𝑡𝑦 = width of structure
𝑇𝑖𝑚𝑒 𝑡𝑎𝑘𝑒 𝑏𝑦 𝑝𝑢𝑙𝑠𝑒 𝑡𝑜 𝑔𝑒𝑡..
𝑡ℎ𝑟𝑜𝑢𝑔ℎ 𝑖𝑡
Source:- Wikipedia
@etconp
An ultrasonic pulse velocity (UPV)test is an in-situ, Non destructive test test to check the quality of concrete and natural rocks. In this test, the strength and quality of concrete or rock is assessed by measuring the velocity of an ultrasonic pulse passing through a concrete structure or natural rock formation.
This test is conducted by passing a pulse of ultrasonic through concrete to be tested and measuring the time taken by pulse to get through the structure. Higher velocities indicate good quality and continuity of the material, while slower velocities may indicate concrete with many cracks or voids.
Ultrasonic testing equipment includes a pulse generation circuit, consisting of electronic circuit for generating pulses and a transducer for transforming electronic pulse into mechanical pulse having an oscillation frequency in range of 40 kHz to 50 kHz, and a pulse reception circuit that receives the signal.
𝑃𝑢𝑙𝑠𝑒 𝑣𝑒𝑙𝑜𝑐𝑖𝑡𝑦 = width of structure
𝑇𝑖𝑚𝑒 𝑡𝑎𝑘𝑒 𝑏𝑦 𝑝𝑢𝑙𝑠𝑒 𝑡𝑜 𝑔𝑒𝑡..
𝑡ℎ𝑟𝑜𝑢𝑔ℎ 𝑖𝑡
Source:- Wikipedia
@etconp
Seahorse villa Dubai, UAE 🇦🇪
Floating houseboat with 4000 ft² (371.6m²) of space bed rooms 🛌 with underwater coral reef view.
3 story luxury villa with the basement totally submerged on the sea 🌊 the villa is prefabricate in a warehouse near to the sea so that they can transport the house easily. The house is made up of steel (structure) and the basement is made up of glass assembled in warehouse near to the sea then placed in the sea.
To buy this house it costs :- $3 million
What do you think ?
Do you want us to post the documentary on the construction procedure of this house? If so join our telegram channel? If you want thumbs up 👍🏿
@etconp
Floating houseboat with 4000 ft² (371.6m²) of space bed rooms 🛌 with underwater coral reef view.
3 story luxury villa with the basement totally submerged on the sea 🌊 the villa is prefabricate in a warehouse near to the sea so that they can transport the house easily. The house is made up of steel (structure) and the basement is made up of glass assembled in warehouse near to the sea then placed in the sea.
To buy this house it costs :- $3 million
What do you think ?
Do you want us to post the documentary on the construction procedure of this house? If so join our telegram channel? If you want thumbs up 👍🏿
@etconp
Ethio Construction Engineering
Secant pile walls construction methodology Secant pile walls are extremely effective type of embedded or in ground retaining wall. They are formed with intersecting pile of concrete forming a continuous structure. Secant walls hold soil and rock back, even…
Secant wall piles 👆🏾👆🏾
Alternate female piles formed using slow-gain ( soft) concrete mix. The installation sequence is normally to install 1 pile every other 3 piles.
After a sufficient curing period (2-4 days) and once each alternate pile is formed , the reinforcements female piles overlap by approximately 75- 100 mm In IS ( Indian standard)
The secant between male and female piles ensures that water ingress is minimized and fines wash out is prevented. The interlocking secant wall is not watertight; however water flow is greatly reduced. Similar pile sizes and retained height is contiguous piling is offered.
Source:- Nptel
@etconp
Alternate female piles formed using slow-gain ( soft) concrete mix. The installation sequence is normally to install 1 pile every other 3 piles.
After a sufficient curing period (2-4 days) and once each alternate pile is formed , the reinforcements female piles overlap by approximately 75- 100 mm In IS ( Indian standard)
The secant between male and female piles ensures that water ingress is minimized and fines wash out is prevented. The interlocking secant wall is not watertight; however water flow is greatly reduced. Similar pile sizes and retained height is contiguous piling is offered.
Source:- Nptel
@etconp
Ethio Construction Engineering via @like
Seahorse villa Dubai, UAE 🇦🇪 Floating houseboat with 4000 ft² (371.6m²) of space bed rooms 🛌 with underwater coral reef view. 3 story luxury villa with the basement totally submerged on the sea 🌊 the villa is prefabricate in a warehouse near to the sea…
Telegram
Ethiopian Construction Work Professionals - ETCONp
Documentary film regarding sea horse house construction 🚧 the most fascinating residential villa you can imagine
Seahorse villa Dubai, UAE 🇦🇪
Floating houseboat with 4000 ft² (371.6m²) of space bed rooms 🛌 with underwater coral reef view.
3 story luxury…
Seahorse villa Dubai, UAE 🇦🇪
Floating houseboat with 4000 ft² (371.6m²) of space bed rooms 🛌 with underwater coral reef view.
3 story luxury…
Forwarded from Ethio Construction Engineering (Fîłmøñ Łûël)
⚡ባለፈው ፅሁፋችን ስለ ዊር (Weir) ፅፈን ነበር ብዙ ሰዎችም ስለ ዊር (Weir) እና ባሬጅ (barrage) ልዩነት ጠይቃችሁናል።
⏩ምላሹም እንሆ ... @COTMp
*እስኪ ቀለል ባለ አማርኛ የዊር (Weir) እና ባሬጅ (Barrage)
ልዩነታቸው ምንድነው ለሚለው መልስ ልስጥ።
.
⏩ [ ዊር - Weir ]
ዊር በወንዝ ወይም በውሃ መሄጃ ሸለቆ የሚገነባ የሃይድራውሊክ
መዋቅር ሲሆን ውሃን በማገድ በላይኛው ተፋሰስ (upstream)
በኩል የውሃውን ቁመት/መጠን በሚፈለገው ልክ እንዲሆን
የሚያስችል መዋቅር ነው። ከተፈለገው መጠን በላይ የተከማቸ ውሃ በዊሩ አናት ላይ (crest level) ፈሶ እንዲያልፍ
የሚያስችለውን የመዋቅር አይነት እና ጉልበት እንዲኖረው ሆኖ
ይገነባል። ዊር የሚገነባው ዝፍቀት (immersion) በሚከሰትበት
የወንዝ ወይም የውሃ መውረጃ ላይ ነው።
.
⏩[ባሬጅ - Barrage]
በመቆጣጠሪያ (manual or automatic) ልንቆጣጠራቸው
የምንችላቸው የውሃ ማለፍያ በሮች በዊራችን ላይ የምንገነባ
ከሆነ ይህ መዋቅር Barrage በመባል ይጠራል። ከዊር በተለየ
በባሬጅ ግዜ የውሃ መጠኑን የምንቆጣጠረው የውሃ ማለፍያ
በሮችን በመክፈትና በመዝጋት ነው እነዚህ በሮች በተለያየ ደረጃ /
ከፍታ ይገነባሉ። በባሬጅ ግዜ ከመጠን ያለፈ ውሃ በበሮቹ
ይወገዳል እንጂ በዊሩ አናት ላይ (Overflow) አያልፍም።
.
🚩 የምትሰጡን አስተያየት ሆነ ማበረታቻ ብርታት ይሆነናል!
ምስጋናችን ከልብ ነው።
⏩ምላሹም እንሆ ... @COTMp
*እስኪ ቀለል ባለ አማርኛ የዊር (Weir) እና ባሬጅ (Barrage)
ልዩነታቸው ምንድነው ለሚለው መልስ ልስጥ።
.
⏩ [ ዊር - Weir ]
ዊር በወንዝ ወይም በውሃ መሄጃ ሸለቆ የሚገነባ የሃይድራውሊክ
መዋቅር ሲሆን ውሃን በማገድ በላይኛው ተፋሰስ (upstream)
በኩል የውሃውን ቁመት/መጠን በሚፈለገው ልክ እንዲሆን
የሚያስችል መዋቅር ነው። ከተፈለገው መጠን በላይ የተከማቸ ውሃ በዊሩ አናት ላይ (crest level) ፈሶ እንዲያልፍ
የሚያስችለውን የመዋቅር አይነት እና ጉልበት እንዲኖረው ሆኖ
ይገነባል። ዊር የሚገነባው ዝፍቀት (immersion) በሚከሰትበት
የወንዝ ወይም የውሃ መውረጃ ላይ ነው።
.
⏩[ባሬጅ - Barrage]
በመቆጣጠሪያ (manual or automatic) ልንቆጣጠራቸው
የምንችላቸው የውሃ ማለፍያ በሮች በዊራችን ላይ የምንገነባ
ከሆነ ይህ መዋቅር Barrage በመባል ይጠራል። ከዊር በተለየ
በባሬጅ ግዜ የውሃ መጠኑን የምንቆጣጠረው የውሃ ማለፍያ
በሮችን በመክፈትና በመዝጋት ነው እነዚህ በሮች በተለያየ ደረጃ /
ከፍታ ይገነባሉ። በባሬጅ ግዜ ከመጠን ያለፈ ውሃ በበሮቹ
ይወገዳል እንጂ በዊሩ አናት ላይ (Overflow) አያልፍም።
.
🚩 የምትሰጡን አስተያየት ሆነ ማበረታቻ ብርታት ይሆነናል!
ምስጋናችን ከልብ ነው።
A Beam with number of opening in its web is ________?
1. Hybrid beam
2. Castellated beam
3. Tapered beam
4. None
#participate #beam #quiz
@etconp
1. Hybrid beam
2. Castellated beam
3. Tapered beam
4. None
#participate #beam #quiz
@etconp
Ethio Construction Engineering via @like
A Beam with number of opening in its web is ________? 1. Hybrid beam 2. Castellated beam 3. Tapered beam 4. None #participate #beam #quiz @etconp
A Beam with number of opening in its web is ________?
Anonymous Quiz
17%
Hybrid beam
60%
Castellated beam
19%
Tapered beam
5%
None
👉Hydrology
.
🔖Precipitation
.
🔸 The precipitation denotes all forms of water that reach the earth surface from the atmosphere. These usual forms are rainfall, snowfall, hail, frost and dew.
👉 The percentage of earth covered by oceans is about 71%
👉 The percentage of total quantity of water in the world that is saline is about 97%
👉 Thee percentage of total quantity of fresh water in the world available in the liquid form is about 30%
🔸 Rainfall : Water drops of sizes larger than 0.5mm. The maximum size of a raindrops is about 6mm
👉 Intensity of rainfall
1. Light rain : 1 mm/h to 2.5 mm/h
2. Moderate rain : 2.5 mm/h to 7.5 mm/h
3. Heavy rain : > 7.5 mm/h
🔸 Drizzle : Size of drop is less than 0.5 mm
🔸 Snow : Ice crystal, Combine to form flakes.
🔸 Hail : Lumps of ice more than 8 mm in size
@ETCONP
.
🔖Precipitation
.
🔸 The precipitation denotes all forms of water that reach the earth surface from the atmosphere. These usual forms are rainfall, snowfall, hail, frost and dew.
👉 The percentage of earth covered by oceans is about 71%
👉 The percentage of total quantity of water in the world that is saline is about 97%
👉 Thee percentage of total quantity of fresh water in the world available in the liquid form is about 30%
🔸 Rainfall : Water drops of sizes larger than 0.5mm. The maximum size of a raindrops is about 6mm
👉 Intensity of rainfall
1. Light rain : 1 mm/h to 2.5 mm/h
2. Moderate rain : 2.5 mm/h to 7.5 mm/h
3. Heavy rain : > 7.5 mm/h
🔸 Drizzle : Size of drop is less than 0.5 mm
🔸 Snow : Ice crystal, Combine to form flakes.
🔸 Hail : Lumps of ice more than 8 mm in size
@ETCONP
The Grand palace parking project , which is set to hold more than 1,400 cars at a budget of 1.2 billion birr
Adiss Ababa,Ethiopia 🇪🇹
በ 1.2 ቢሊዮን ብር በጀት ከ 1,400 በላይ መኪና እንዲይዝ ታስቦ እየተሰራ የሚገኘው የታላቁ ቤተ-መንግስት መኪና ማቆሚያ ፕሮጀክት
Source :- ethiopia live update / twitter
@etconp
Adiss Ababa,Ethiopia 🇪🇹
በ 1.2 ቢሊዮን ብር በጀት ከ 1,400 በላይ መኪና እንዲይዝ ታስቦ እየተሰራ የሚገኘው የታላቁ ቤተ-መንግስት መኪና ማቆሚያ ፕሮጀክት
Source :- ethiopia live update / twitter
@etconp
❤2