Ethio Construction Engineering
32.3K subscribers
6.27K photos
359 videos
1.99K files
3.33K links
🔨 World Construction Engineering
Latest updates, tips, and tutorials on building, civil engineering, and construction in World.
Learn, build, and grow with us!

📨 @Philemona7 Or @ETCONpBOT

For Ad:- https://telega.io/c/etconp
Download Telegram
Hydrology

Precipitation

♦️ Measurement of precipitation

👉 It measures by rain gauge

👉 Rain gauge is also known as Pluviometer, Ombrometer, hyetometer.

👉 No object should be nearer to the instrument than 30m or twice the height of obstruction

♦️ Types of rain gauges

1. Non recording type

👉 It gives total depth of precipitation

👉 Symon's rain gauge is a non recording type. Diameter of Symon's rain gauge is 12.7 cm

2. Recording type gauge

👉 It gives rainfall depth with respect to time

👉 Types of Recording type gauge

A. Tipping bucket type (Telemetric type) : It gives intensity of rainfall. It is ideally suitable for mountainous and other inaccessible places

B. Weighing bucket type : It gives mass curve of rainfall

C. Natural siphon type (Float type) : It gives mass curve of rainfall. It is the standard recording type gauge adopted by Indian standard

♦️ Rain gauge network

👉 The ratio of total area of the catchment to the total number of gauges in the catchment is called as rain gauge density

👉 At least 10% of station should be of Recording type

👉 Raingauge density ( Is 4987-1968) 👇

1. Plain area :- 1 station per 520 Sq.km

2. Region of Avg. elevation 1000 m :- 1 station per 260-390 Sq.km

3. Predominantly hilly areas with heavy rainfall :- 1 station per 130 Sq.km

@etconp
What type of bridge 🌉 is this ?

1. Beam bridge 🌉

2. Suspension bridge 🌉

3. Arch bridge 🌉

4. Cantilever bridge 🌉

Reference

👉🏿 https://t.me/ETCONP/2698

#bridge #quiz

@etconp
Which one of the following supports can’t have zero deflection in vertical direction ?

1. Pin support

2. Roller support

3. Fixed support

4. Hinged support

#support #quiz

@etconp
Ethio Construction Engineering via @like
Which one of the following supports can’t have zero deflection in vertical direction ? 1. Pin support 2. Roller support 3. Fixed support 4. Hinged support #support #quiz @etconp
Which one of the following supports can’t have zero deflection in vertical direction ?
Anonymous Quiz
15%
Pin support
26%
Roller support
43%
Fixed support
17%
Hinged support
Ethio Construction Engineering via @like
What type of bridge 🌉 is this ? 1. Beam bridge 🌉 2. Suspension bridge 🌉 3. Arch bridge 🌉 4. Cantilever bridge 🌉 Reference 👉🏿 https://t.me/ETCONP/2698 #bridge #quiz @etconp
The answer for this question is Arch bridge 🌉 3️⃣

Arch bridge is a bridge with abutment at each end shaped as curved arch. Arch bridges work by transferring the weight of the bridge and it’s old partially into horizontal thrust restrained by the abutment at either side.

@etconp
Ethio Construction Engineering via @like
Which one of the following supports can’t have zero deflection in vertical direction ? 1. Pin support 2. Roller support 3. Fixed support 4. Hinged support #support #quiz @etconp
Answer for this question is hinged support 4️⃣


From the given support, only hinge can move from its initial position in the vertical direction. Fixed , roller and pinned supports do not behave as a hinge which is free to deflect in vertical direction.

[hibler]

@etconp
Site visitation

👆🏾👆🏾They dug out this footing to build another building in this site. Do you think this is appropriate to remove this footing ? For instance they could have used RCC(RC) jacketing.....
What’s your comment @cotmp

ይህን ህንፃ ለመገንባት መጀመሪያ የ ነበረውን footing ቆፍረው አወጡት ይህ ተገቢ ነው ትላላችሁ? እስኪ አስተያየታችሁን ፃፉልን @cotmp

@etconp
Forwarded from Ethio Construction Engineering (Fîłmøñ Łûël)
🔖አስደሳች ዜና ከ @ETCONp
.
👌ሰላም ውድ የቻናላችን ቤተሰቦች ላለፉት ወራት አንድ DIGITAL LIBRARY BOT ግንባታ ላይ ነበርን።
.
📚ይህም ዲጂታል ቤተመፃህፍት በውስጡ የ SOFTWARE SETUP, የ ARCH, COTM እና CIVIL መፅሀፍቶችን የያዘ ነው።

🚧ይህ የመጀመሪያ ምዕራፍ ግንባታ ሲሆን ለቀጣይ በአስተያየታችው መሰረት ብዙ ነገር ምናስተካክል ይሆናል።

👉ይህን link በመጫን ወደ ቤተመፃህፍቱ ልትሄዱ ትችላላችሁ።
👇👇👇👇👇👇
👉🏿 https://t.me/ETCONpDigitalLibrary_Bot

Good News from @ETCONP

👉🏿 For the last few months we have been developing digital library bot which consists ARCHITECTURE, Construction technology management and civil engineering books

👉🏿 This is the first phase of development base one tour request we will expand it In the future

👉🏿Tap the link below to access the digital library 📚👇🏾👇🏾👇🏾

👉🏿 @ETCONpDigitalLibrary_Bot
RC QUIZ

For balanced section of RCC(RC) beam, what is the area of steel required if the area of concrete 100 inch². 𝑓𝑐’= 4ksi and 𝑓𝑦= 60ksi.

Where ksi= kilopound per square inch or 1000 pounds per square inch.

1. 2.6 inch²

2. 3.6 inch²

3. 4.6 inch²

4. 5.6 inch²

#RC #quiz

@etconp
Ethio Construction Engineering via @like
RC QUIZ For balanced section of RCC(RC) beam, what is the area of steel required if the area of concrete 100 inch². 𝑓𝑐’= 4ksi and 𝑓𝑦= 60ksi. Where ksi= kilopound per square inch or 1000 pounds per square inch. 1. 2.6 inch² 2. 3.6 inch² 3. 4.6…
RC QUIZ

For balanced section of RCC(RC) beam, what is the area of steel required if the area of concrete 100 inch². 𝑓𝑐’= 4ksi and 𝑓𝑦= 60ksi. Where ksi= kilopound per square inch or 1000 pounds per square inch.
Anonymous Quiz
13%
2.6 inch²
39%
3.6 inch²
38%
4.6 inch²
10%
5.6 inch²
This media is not supported in your browser
VIEW IN TELEGRAM
Ethio Construction Engineering
Sticker
Take a rectangular stick or assume your phone and try to bend it along its flat surface. You will be able to do it. Because in this case it is relatively flexible.

A structural member is defined using two different criteria: Capacity and stiffness. They both are two different things. Capacity is the strength of the member to support loads before it fails and stiffness defines deformation of a member under a unit of applied load.

Now before going to that phone bending scenario, let us take a quick look at what is moment of resistance of section.

We all know what a bending moment is. A bending moment is a type of force which case "bending" of a structural member. It happens when you load a member perpendicular to its spanning direction.

Why not in the perpendicular direction? Because it is the most flexible in this direction and so easy to bend. Also mark that the depth of the iPhone in this direction is the lowest, that is equal to the thickness of the phone. Which means low moment capacity. Thus it is easy to kick this dude's butt. You can try it with any rectangular cross section object. About one axis it will be weaker than the other axis.

@etconp
FUNCTIONS OF FOUNDATIONS

Foundations serve the following purposes :-
1.Reduction of load intensity:- Foundations distribute the loads of the super-structure to a larger area so that the intensity of the load at its base (i.e., the total load divided by the total area)does not exceed the safe bearing capacity of the sub-soil. In the case of deep foundations it transmits the super imposed loads to the sub soil both through side friction as well as through end bearing
2.Even distribution of load:- Foundations distribute the non-uniform load of the super-structure evenly to be sub soil. For example two columns carrying unequal loads can have a combined footing which may transmit the load to sub soil evenly with uniform soil pressure. Due to this, differential settlements are minimised.
3. Provision of level surface:- Foundations provide levelled and hard surface over which the super structure can be built.
4. Lateral stability:- It anchors the super structure to the ground, thus imparting lateral stability to the super structure.The stability of the building, against sliding and overturning, due to horizontal forces (Such as wind, Earthquake etc.) is increased due to foundations.
5.Safety against undermining:- It provides the structural safety against undermining or scouring due to burrowing animals and flood water.
6.Protection against soil movements:- Special foundations measures prevents or minimises the distress (or cracks) in the super structure, due to expansion or contraction of the sub soil because of moisture movement in some problematic soils.

ESSENTIAL REQUIREMENTS OF A GOOD FOUNDATIONS :-
Foundations should be constructed to safety the following requirements:-
1.The foundations shall be constructed to sustain dead and imposed loads and to transmit these to the sub soil in such a way that pressure on it will not cause settlement which would impair the stability of the building or adjoining structures.
2.Foundation base should be rigid so that differential settlements are minimised, specially for the case when super imposed loads are not evenly distributed .
3.Foundations should be taken sufficiently deep to gaurd the building against damage or distress caused by swelling or shrinkage of the sub soil.
4. Foundations should be safely located that its performance may not be affected due to any unexpected future influence.

@etconp
👉የአርማታ ብረት በሜትር ምን ያህል ይመዝናል? @COTMp
.
⏩ለኮንስትራክሽን ግብዐት የምንጠቀማቸው የአርማታ ብረት በቅርፃቸው በሁለት ይከፈላሉ
1. ልሙጥ ብረት(Mild Steel or plain rebar)
2. ባለ ክርክር/አርማታ ብረት(Deformed steel rebar)
➡በጥንካሬ ደረጃ ደግሞ በስፋት Grade 60 እና Grade 40
በመባል ይለያሉ ይህም ውጥረታዊ ሀይል/tensile strength/ በመቌቌም አቅማቸው ነው።
*Grade 40=275.79MPa yield strength ሲኖረው
*Grade 60=413.68MPa yield strength ይኖረዋል።
.
ለሁሉም እንዲዳረስ ፖስቶቹን SHARE አድርጉልን።
👇👇👇👇👇
Join for more updates via the link below;
t.me/COTMp
👆👆👆👆👆
Surveying quiz

Survey which determines property line (property boundaries) is called __?

1. City survey

2. Cadastral survey

3. Land survey

4. Topographic survey

#quiz #survey

@etconp
Ethio Construction Engineering via @like
Surveying quiz Survey which determines property line (property boundaries) is called __? 1. City survey 2. Cadastral survey 3. Land survey 4. Topographic survey #quiz #survey @etconp
Surveying quiz

Survey which determines property line (property boundaries) is called __?
Anonymous Quiz
8%
City survey
59%
Cadastral survey
23%
Land survey
10%
Topographic survey