Forwarded from Ethio Construction Engineering
👉ስለ ክርስቲ @COTMp
.
👆ይህ ከላይ በምስሉ ላይ የሚታየው ክርስቲ ይባላል - ቢሙ ካስት ሲደረግ በዋነኝነት የቢሙን ሎድ የሚሸከም በአራት አጠናዎች የተዋቀረ ነው፡፡
‹ ዋ › ፊደልን ይመስላል፡፡
.
ቢም ካስት ከማድረጋችን በፊት የምንከተላቸውን እስቴፖች
ቀጥለን እንመለከታለን፡፡
.
1. በመጀመሪያ ጎማ ውሃ ልክ አዙረን ቢሙ የሚያርፍበትን ቦታ
already ካስት የተደረጉ ኮለኖች ላይ ምልክት እናደርጋለን፡፡
.
2. በኮለኖች መሃል ምልክት የተደረገባቸውን ቦታዎች በሲባጎ
እናገናኛለን - ሲባጎው የሚያርፍበት ቦታ የቢሙ ስር ወይም ቂጥ ነው
.
3. በሁለት ኮለኖች መሃል - ኮለኖቹ ጥግ ላይ ሁለት ክርስቲ
አቁመን ወገባቸውን እናሲዛለን
.
4. በሁለት ኮለኖች መሃል የሚያስፈልገውን ያህል ክርስቲ
እንደረድርና በዳርኞቹ ክርስቲዎች ውስጥ ሁለት ማገሮች እናስገባለን፡፡ በመቀጠልም መሃል ላይ ያሉትን ወይም ወገባቸውን
ያልያዙትን ክርስቲዎች ከማገሩ ውጪ በማድረግ ወገባቸውን
በሚስማር እናሲዛለን
.
5. ክርስቲዎቹ አናት ላይ በሁለቱም በኩል ማገር እንመታለን
.
6. ሌላ ትይዩ ቢም ካለ ከእስቴፕ 1-5 ያለውን እንሰራለትና
ከዚኛው የክርስቲ ግሩፖች ጋር በማገር እናያይዛቸዋለን
.
7. በተወሰነ ርቀት ላይ ስላቡ የሚያርፍበትን ቋሚዎች እናቆማለን
.
8. ለውሃ ልክ የዘረጋነው ሲባጎና የክርስቲው አናት ልክ ከመጣልን
እንደዛው እንተወዋለን - ልክ ካልመጣ ግን ‹ ኩኞ › በክርስቲውና
በሲባጎው (ፎንዶው ስር) መሃል እናስገባለን
.
9. ፎንዶውን የቢሙን alignment ጠብቀን እናስቀምጣለን
.
10. ስፖንዳ እንመታለን - እስፖንዳውን በአጠና እንደግፈዋለን
.
11. የቢሙን reinforcement አስገብተን ቢሙን ካስት
እናደርጋለን
.
--ኩኞ -ቁርጥራጭ አጠና
-ፎንዶ - ቀጥታ ከቢሙ ስር የሚያርፍ ተሸካሚ ፎርም ዎርክ
-እስፖንዳ - ቢሙን ከጎን የሚይዝልን ፎርም ዎርክ
.
Join for more updates via the link below;
t.me/COTMp
.
👆ይህ ከላይ በምስሉ ላይ የሚታየው ክርስቲ ይባላል - ቢሙ ካስት ሲደረግ በዋነኝነት የቢሙን ሎድ የሚሸከም በአራት አጠናዎች የተዋቀረ ነው፡፡
‹ ዋ › ፊደልን ይመስላል፡፡
.
ቢም ካስት ከማድረጋችን በፊት የምንከተላቸውን እስቴፖች
ቀጥለን እንመለከታለን፡፡
.
1. በመጀመሪያ ጎማ ውሃ ልክ አዙረን ቢሙ የሚያርፍበትን ቦታ
already ካስት የተደረጉ ኮለኖች ላይ ምልክት እናደርጋለን፡፡
.
2. በኮለኖች መሃል ምልክት የተደረገባቸውን ቦታዎች በሲባጎ
እናገናኛለን - ሲባጎው የሚያርፍበት ቦታ የቢሙ ስር ወይም ቂጥ ነው
.
3. በሁለት ኮለኖች መሃል - ኮለኖቹ ጥግ ላይ ሁለት ክርስቲ
አቁመን ወገባቸውን እናሲዛለን
.
4. በሁለት ኮለኖች መሃል የሚያስፈልገውን ያህል ክርስቲ
እንደረድርና በዳርኞቹ ክርስቲዎች ውስጥ ሁለት ማገሮች እናስገባለን፡፡ በመቀጠልም መሃል ላይ ያሉትን ወይም ወገባቸውን
ያልያዙትን ክርስቲዎች ከማገሩ ውጪ በማድረግ ወገባቸውን
በሚስማር እናሲዛለን
.
5. ክርስቲዎቹ አናት ላይ በሁለቱም በኩል ማገር እንመታለን
.
6. ሌላ ትይዩ ቢም ካለ ከእስቴፕ 1-5 ያለውን እንሰራለትና
ከዚኛው የክርስቲ ግሩፖች ጋር በማገር እናያይዛቸዋለን
.
7. በተወሰነ ርቀት ላይ ስላቡ የሚያርፍበትን ቋሚዎች እናቆማለን
.
8. ለውሃ ልክ የዘረጋነው ሲባጎና የክርስቲው አናት ልክ ከመጣልን
እንደዛው እንተወዋለን - ልክ ካልመጣ ግን ‹ ኩኞ › በክርስቲውና
በሲባጎው (ፎንዶው ስር) መሃል እናስገባለን
.
9. ፎንዶውን የቢሙን alignment ጠብቀን እናስቀምጣለን
.
10. ስፖንዳ እንመታለን - እስፖንዳውን በአጠና እንደግፈዋለን
.
11. የቢሙን reinforcement አስገብተን ቢሙን ካስት
እናደርጋለን
.
--ኩኞ -ቁርጥራጭ አጠና
-ፎንዶ - ቀጥታ ከቢሙ ስር የሚያርፍ ተሸካሚ ፎርም ዎርክ
-እስፖንዳ - ቢሙን ከጎን የሚይዝልን ፎርም ዎርክ
.
Join for more updates via the link below;
t.me/COTMp
Telegram
ETCONp Discussion
📩ለማነኛውም ሀሳብ እና አስተያየት @Philemona7
✌️ይህ የ @etconp መወያያ ግሩፓቹ ነው።
✋This is discussion group of @ETCONpWORK
.
🔖ማሳሰብያ ...
.
⚡️ግሩፑ ላይ ማነኛውም ከ ኮንስትራክሽን ጉዳዮች ውጪ መለጠፍ በፍፁም አይፈቀድም!
@ETCONpBOT ፃፉልን እናመሰግናለን🙏
✌️ይህ የ @etconp መወያያ ግሩፓቹ ነው።
✋This is discussion group of @ETCONpWORK
.
🔖ማሳሰብያ ...
.
⚡️ግሩፑ ላይ ማነኛውም ከ ኮንስትራክሽን ጉዳዮች ውጪ መለጠፍ በፍፁም አይፈቀድም!
@ETCONpBOT ፃፉልን እናመሰግናለን🙏
Aeolian soil is related to
1. Wind
2. Sea
3. River
4. Gravitation
Reference
👉🏿 https://t.me/ETCONP/3655
@etconp
1. Wind
2. Sea
3. River
4. Gravitation
Reference
👉🏿 https://t.me/ETCONP/3655
@etconp
Telegram
Ethiopian Construction Work Professionals - ETCONp
Types of Soils and agent of of transportation
Based on this we will come quizzes
@etconp
Based on this we will come quizzes
@etconp
Ethio Construction Engineering via @like
Addition of pozzolana to ordinary Portland cement (OPC) increases ? 1. Bleeding 2. Shrinkage 3. Permeability 4. Heat of hydration @etconp
Addition of pozzolana to ordinary Portland cement (OPC) increases ?
Anonymous Quiz
10%
Bleeding
43%
Shrinkage
18%
Permeability
30%
Heat of hydration
Ethio Construction Engineering via @like
Addition of pozzolana to ordinary Portland cement (OPC) increases ? 1. Bleeding 2. Shrinkage 3. Permeability 4. Heat of hydration @etconp
Answer for this question 👆🏾👆🏾
The answer is 2️⃣
pozzolana has a cementicious property main used to reduce heat of hydration by slowing down the hyd processes, reduce permeability due to its finesses, bleeding is not connected with pozzolanic materials so only shrinkage is the best suited option left
Join us on telegram:- @etconp
The answer is 2️⃣
pozzolana has a cementicious property main used to reduce heat of hydration by slowing down the hyd processes, reduce permeability due to its finesses, bleeding is not connected with pozzolanic materials so only shrinkage is the best suited option left
Join us on telegram:- @etconp
የኢትዮጵያ መንገዶች ባለሥልጣን ከ25 ነጥብ 8 ቢሊዮን ብር በላይ በሆነ ወጪ የተለያዩ የሃገሪቱን አካባቢዎች የሚያስተሳስሩ አስራ አምስት መንገዶችን በአስፋልት ደረጃ ለመገንባት የሚያስችል የውል ስምምነት ፊርማ ዛሬ አካሄደ።
Via Capital
@ETCONp
Via Capital
@ETCONp
Forwarded from Ethio Construction Engineering (जॉर्डनो ג׳ורדנו ጆርዳኖ جوردانو จอร์แดโน่ JORDANO Ιορδάνοςஜார்டானோ)
This media is not supported in your browser
VIEW IN TELEGRAM
#Surveying
🌟 Important Points in surveying.📚❤️📚
👉Horizontal plane tangential to the level surface at
👉Level surfaces parallel to the mean spheroidal surface of the earth
👉RL of the line of collimation is known as the height of instrument
👉 Differential levelling also known as compound levelling or continuous levelling
👉Fly levelling is used to connect the benchmark to the starting point of alignment of any project
👉 Check levelling is the fly levelling done at the end of the days work to connect the point with starting point on that particular day to check the accuracy of the days work
Join📚share📚Helpful
Join us on telegram:- @ETCONP
Follow us on Instagram:- @etconp
🌟 Important Points in surveying.📚❤️📚
👉Horizontal plane tangential to the level surface at
👉Level surfaces parallel to the mean spheroidal surface of the earth
👉RL of the line of collimation is known as the height of instrument
👉 Differential levelling also known as compound levelling or continuous levelling
👉Fly levelling is used to connect the benchmark to the starting point of alignment of any project
👉 Check levelling is the fly levelling done at the end of the days work to connect the point with starting point on that particular day to check the accuracy of the days work
Join📚share📚Helpful
Join us on telegram:- @ETCONP
Follow us on Instagram:- @etconp
Forwarded from Deleted Account
To make 1 cubic metre of 1: 2 :4 by volume of concrete, the value of coarse aggregate required is in m^3
Anonymous Quiz
13%
0.95
48%
0.85
23%
0.75
16%
0.65
Force acting on structures
❓Based on this what is the difference polar moment of inertia and moment of inertia area plane ?
👉🏿 https://t.me/ETCONP/3757
Join us on telegram:- @etconp
Follow us on Instagram:- @etconp
❓Based on this what is the difference polar moment of inertia and moment of inertia area plane ?
👉🏿 https://t.me/ETCONP/3757
Join us on telegram:- @etconp
Follow us on Instagram:- @etconp
Ethio Construction Engineering via @like
What type of bridge 🌉 is this ? 1. Beam bridge 🌉 2. Suspension bridge 🌉 3. Arch bridge 🌉 4. Cantilever bridge 🌉 Reference 👉🏿 https://t.me/ETCONP/2698 #bridge #quiz @etconp
What type of bridge 🌉 is this ?
1. Beam bridge 🌉
2. Suspension bridge 🌉
3. Arch bridge 🌉
4. Cantilever bridge 🌉
Reference
👉🏿 https://t.me/ETCONP/2698
#bridge #quiz
@etconp
1. Beam bridge 🌉
2. Suspension bridge 🌉
3. Arch bridge 🌉
4. Cantilever bridge 🌉
Reference
👉🏿 https://t.me/ETCONP/2698
#bridge #quiz
@etconp
Ethio Construction Engineering via @like
What type of bridge 🌉 is this ? 1. Beam bridge 🌉 2. Suspension bridge 🌉 3. Arch bridge 🌉 4. Cantilever bridge 🌉 Reference 👉🏿 https://t.me/ETCONP/2698 #bridge #quiz @etconp
The answer for this question is beam bridge 🌉 1️⃣
Beam bridges, also known as stringer bridges, are the simplest structural forms for bridge spans supported by an abutment or pier at each end. No moments are transferred throughout the support, hence their structural type is known as simply supported.
Join us on telegram:- @etconp
Follow us on Instagram:- @etconp
Beam bridges, also known as stringer bridges, are the simplest structural forms for bridge spans supported by an abutment or pier at each end. No moments are transferred throughout the support, hence their structural type is known as simply supported.
Join us on telegram:- @etconp
Follow us on Instagram:- @etconp
Telegram
Ethio Construction Engineering
🔨 World Construction Engineering
Latest updates, tips, and tutorials on building, civil engineering, and construction in World.
Learn, build, and grow with us!
📨 @Philemona7 Or @ETCONpBOT
For Ad:- https://telega.io/c/etconp
Latest updates, tips, and tutorials on building, civil engineering, and construction in World.
Learn, build, and grow with us!
📨 @Philemona7 Or @ETCONpBOT
For Ad:- https://telega.io/c/etconp
Building construction
♦️ Principles of building planning
1. Aspect : It is defined as the positioning of windows and doors in the external walls to take maximum advantage of natural gifts such as sunlight and wind or breeze.
2. Prospect : Prospect means taking advantage of desirable views available from Windows, doors and balconies of features outside the building auch as gardens, lake, sea, river etc.
3. Orientation : Orientation means the placement of rooms with reference to the north direction.
4. Privacy
5. Circulation : Circulation refers to movement from one place to other inside the building
6. Grouping : This means planning room with same or similar functions together as a group.
7. Roominess : A psychological feeling about bigness or smallness of space of a room is called roominess.
8. Furniture requirements
9. Sanitation : Sanitation is concerned with light & ventilation. It includes proper planning for drainage arrangements.
10. Elegance : It refers to the elevation of the building. The front elevation of the building must be aesthetically pleasing & elegant.
11. Economy : Planning of building should be economical
12. Access : The principle of access stresses the need for ease in moving from room to room.
13. Architectural composition : This principle deals with the aesthetics or the beauty of the building. Architectural concepts such as unity, contrast, scale, proportion, mass composition are taken into account.
14. Climate and it's affect : The climate of a place also affect the planning of a building.
For more information about the concepts of civil engineering
join us on telegram:- @ETCONP
Follow us on Instagram:- @etconp
♦️ Principles of building planning
1. Aspect : It is defined as the positioning of windows and doors in the external walls to take maximum advantage of natural gifts such as sunlight and wind or breeze.
2. Prospect : Prospect means taking advantage of desirable views available from Windows, doors and balconies of features outside the building auch as gardens, lake, sea, river etc.
3. Orientation : Orientation means the placement of rooms with reference to the north direction.
4. Privacy
5. Circulation : Circulation refers to movement from one place to other inside the building
6. Grouping : This means planning room with same or similar functions together as a group.
7. Roominess : A psychological feeling about bigness or smallness of space of a room is called roominess.
8. Furniture requirements
9. Sanitation : Sanitation is concerned with light & ventilation. It includes proper planning for drainage arrangements.
10. Elegance : It refers to the elevation of the building. The front elevation of the building must be aesthetically pleasing & elegant.
11. Economy : Planning of building should be economical
12. Access : The principle of access stresses the need for ease in moving from room to room.
13. Architectural composition : This principle deals with the aesthetics or the beauty of the building. Architectural concepts such as unity, contrast, scale, proportion, mass composition are taken into account.
14. Climate and it's affect : The climate of a place also affect the planning of a building.
For more information about the concepts of civil engineering
join us on telegram:- @ETCONP
Follow us on Instagram:- @etconp
Forwarded from Ethio Construction Engineering (Fîłmøñ Łûël)
⚡መያዥያ ገንዘብ (Retention money) @COTMp
.
👉ስራ ተቋራጩ የተሰጠውን ስራውን ጨርሶ የስህተት ማስተካከያ ግዜ ድረስ/defect liability period / ሀላፊነት
ለመወጣቱ ማረጋገጫ እንዲሆን ከእያንዳንዱ የክፍያ ቅፅ የሚያዝ
ገንዘብ ነው።
▶ከክፍያ ቅፅ ምን ያህል ሊቆረጥበት እንደሚገባ ለፕሮጀክቱ በልዪ ሁኔታ የተዘጋጀው ውል/special condition of contract/በግልፅ ሊያስቀምጥ ይገባል።
▶ሆኖም ከ አስር ፐርሰንት (10%) የበለጠ መሆን አይችልም።
▶በሀገራችን አብዛኛውን ግዜ አምስት ፐርሰንት(5%) ብቻ የተለመደ ነው።
ስራው እንደተጠናቀቀ ግማሹ ከመጨረሻ ክፍያ ጋር ቀሪው ደግሞ ከርክክብ በኋላ ስራው ላይ ስህተት ቢፈጠር በውሉ ላይ የማስተካከያ ቀነ ገደብ ሲጠናቀቅ ከመጨረሻ ርክክብ ጋር በ
አርባ አምስት (45) ቀናት ውስጥ ይለቀቅለታል።
.
🚩ለሁሉም እንዲዳረስ ፖስቶቹን SHARE አድርጉልን።
.
👉ስራ ተቋራጩ የተሰጠውን ስራውን ጨርሶ የስህተት ማስተካከያ ግዜ ድረስ/defect liability period / ሀላፊነት
ለመወጣቱ ማረጋገጫ እንዲሆን ከእያንዳንዱ የክፍያ ቅፅ የሚያዝ
ገንዘብ ነው።
▶ከክፍያ ቅፅ ምን ያህል ሊቆረጥበት እንደሚገባ ለፕሮጀክቱ በልዪ ሁኔታ የተዘጋጀው ውል/special condition of contract/በግልፅ ሊያስቀምጥ ይገባል።
▶ሆኖም ከ አስር ፐርሰንት (10%) የበለጠ መሆን አይችልም።
▶በሀገራችን አብዛኛውን ግዜ አምስት ፐርሰንት(5%) ብቻ የተለመደ ነው።
ስራው እንደተጠናቀቀ ግማሹ ከመጨረሻ ክፍያ ጋር ቀሪው ደግሞ ከርክክብ በኋላ ስራው ላይ ስህተት ቢፈጠር በውሉ ላይ የማስተካከያ ቀነ ገደብ ሲጠናቀቅ ከመጨረሻ ርክክብ ጋር በ
አርባ አምስት (45) ቀናት ውስጥ ይለቀቅለታል።
.
🚩ለሁሉም እንዲዳረስ ፖስቶቹን SHARE አድርጉልን።