SURVEYING...
📌▪Some important points related to Surveying▪
▪The basic principle of surveying working from whole to part
👉 Prevents accumulation of errors and localised minor errors
▪An Equilateral triangle is considered to be the best well conditional triangle
( 30° to 120° )
▪The best shape of triangle in triangulation is isosceles with base angle 56°14'
▪A good draftsman can plot a distance as small as a 0.25mm
▪ Control survey for fixing the points on the boundary
▪ land/Cadstral survey to measure the area of land ,
To Fix the legal boundaries and to locate the reference points
▪ Astronomical survey
Study about celestial body,
Determination of latitude and longitude.
▪ Archaeological survey
To Know The civilization of People.
👉The principle involved in chain survey is of triangulation
👉 Compass survey uses the principle of traversing .
👉The principle of plane table survey is parallelism .
👉The principle of Tacheometer is based on property of isosceles triangle, where ratio of the distance of the base from the apex and the length of the base is always constant .
▪Least Count Of Surveying Instruments
👉Prismatic Compass = 30'
👉 Surveyor Compass = 15'
👉 Total station= 1sec
👉Theodolite = 20"
👉 levelling Staff = 5mm
👉 Dummy level=5mm
▪Important Points in surveying.
👉Horizontal plane tangential to the level surface.
👉Level surfaces parallel to the mean spheroidal surface of the earth
👉RL of the line of collimation is known as the height of instrument
👉 Differential levelling also known as compound levelling or continuous levelling
👉Fly levelling is used to connect the benchmark to the starting point of alignment of any project
👉 Check levelling is the fly levelling done at the end of the days work to connect the point with starting point on that particular day to check the accuracy of the days work.
Join👉👉 @ETCONP
📌▪Some important points related to Surveying▪
▪The basic principle of surveying working from whole to part
👉 Prevents accumulation of errors and localised minor errors
▪An Equilateral triangle is considered to be the best well conditional triangle
( 30° to 120° )
▪The best shape of triangle in triangulation is isosceles with base angle 56°14'
▪A good draftsman can plot a distance as small as a 0.25mm
▪ Control survey for fixing the points on the boundary
▪ land/Cadstral survey to measure the area of land ,
To Fix the legal boundaries and to locate the reference points
▪ Astronomical survey
Study about celestial body,
Determination of latitude and longitude.
▪ Archaeological survey
To Know The civilization of People.
👉The principle involved in chain survey is of triangulation
👉 Compass survey uses the principle of traversing .
👉The principle of plane table survey is parallelism .
👉The principle of Tacheometer is based on property of isosceles triangle, where ratio of the distance of the base from the apex and the length of the base is always constant .
▪Least Count Of Surveying Instruments
👉Prismatic Compass = 30'
👉 Surveyor Compass = 15'
👉 Total station= 1sec
👉Theodolite = 20"
👉 levelling Staff = 5mm
👉 Dummy level=5mm
▪Important Points in surveying.
👉Horizontal plane tangential to the level surface.
👉Level surfaces parallel to the mean spheroidal surface of the earth
👉RL of the line of collimation is known as the height of instrument
👉 Differential levelling also known as compound levelling or continuous levelling
👉Fly levelling is used to connect the benchmark to the starting point of alignment of any project
👉 Check levelling is the fly levelling done at the end of the days work to connect the point with starting point on that particular day to check the accuracy of the days work.
Join👉👉 @ETCONP
Engineering mechanics
Analysis of simple trusses
🔰 Method of joints
👉 Analysis should be started from joint where there are not more than two members in which forces are unknown.
Step I) calculate support reaction
Step II Draw FBD of each joint & compute member forces.
🔰 Method of sections
Step I) calculate support reaction
Step II) Consider a section. Section should not cut more than 3 members in which forces are unknown.
Step III) Conditiona of equilibrium is applied on either part of truss and forces are determined.
🔰 Zero force members(VIMP)
RULE 1) If at any joint only two members are meeting & there is no external load & support then those members carry zero force
RULE 2) If at a joint '3' members meeting such that two members are collinear & no external load or support reaction acting at joint then third member is zero force member.
RULE 3) If panel shear in particular member is zero then that member carries zero force.
Join👉👉 @ETCONP
Analysis of simple trusses
🔰 Method of joints
👉 Analysis should be started from joint where there are not more than two members in which forces are unknown.
Step I) calculate support reaction
Step II Draw FBD of each joint & compute member forces.
🔰 Method of sections
Step I) calculate support reaction
Step II) Consider a section. Section should not cut more than 3 members in which forces are unknown.
Step III) Conditiona of equilibrium is applied on either part of truss and forces are determined.
🔰 Zero force members(VIMP)
RULE 1) If at any joint only two members are meeting & there is no external load & support then those members carry zero force
RULE 2) If at a joint '3' members meeting such that two members are collinear & no external load or support reaction acting at joint then third member is zero force member.
RULE 3) If panel shear in particular member is zero then that member carries zero force.
Join👉👉 @ETCONP
Forwarded from Ethio Construction Engineering
Strain (Deformation)
Strain is defined as "deformation of a solid due to stress".
Normal strain - elongation or contraction of a line segment
Shear strain - change in angle between two line segments originally perpendicular Normal strain and can be expressed as
ε = dl / l o
= σ / E (3)
where
dl = change of length (m, in)
l o = initial length (m, in)
ε = strain - unit-less
E = Young's modulus (Modulus of Elasticity) (Pa , (N/ m 2 ), psi (lb f /in 2 ))
Young's modulus can be used to predict the elongation or compression of an object when exposed to a force
Note that strain is a dimensionless unit since it is the ratio of two lengths. But it also common practice to state it as the ratio of two length units - like m/m or in/in .
Poisson's ratio is the ratio of relative contraction strain
Example - Stress and Change of Length
The rod in the example above is 2 m long and made of steel with Modulus of Elasticity 200 GPa (200 10 9 N/m 2 ) . The change of length can be calculated by transforming (3) to
dl = σ lo / E
= (127 10 6 Pa) (2 m) / (200 10 9 Pa)
= 0.00127 m
= 1.27 mm
Strain Energy
Stressing an object stores energy in it. For an axial load the energy stored can be expressed as
U = 1/2 F n dl
where
U = deformation energy (J (N m), ft lb)
Strain is defined as "deformation of a solid due to stress".
Normal strain - elongation or contraction of a line segment
Shear strain - change in angle between two line segments originally perpendicular Normal strain and can be expressed as
ε = dl / l o
= σ / E (3)
where
dl = change of length (m, in)
l o = initial length (m, in)
ε = strain - unit-less
E = Young's modulus (Modulus of Elasticity) (Pa , (N/ m 2 ), psi (lb f /in 2 ))
Young's modulus can be used to predict the elongation or compression of an object when exposed to a force
Note that strain is a dimensionless unit since it is the ratio of two lengths. But it also common practice to state it as the ratio of two length units - like m/m or in/in .
Poisson's ratio is the ratio of relative contraction strain
Example - Stress and Change of Length
The rod in the example above is 2 m long and made of steel with Modulus of Elasticity 200 GPa (200 10 9 N/m 2 ) . The change of length can be calculated by transforming (3) to
dl = σ lo / E
= (127 10 6 Pa) (2 m) / (200 10 9 Pa)
= 0.00127 m
= 1.27 mm
Strain Energy
Stressing an object stores energy in it. For an axial load the energy stored can be expressed as
U = 1/2 F n dl
where
U = deformation energy (J (N m), ft lb)
Forwarded from Deleted Account
The commercial Osmoscope is graduated with PO value from
Anonymous Quiz
28%
0-5
44%
5-10
25%
10-15
3%
15-20
Forwarded from Deleted Account
The total count of bacteria per cubic centimetres for domestic purposes varies from
Anonymous Quiz
28%
0-100
38%
100-150
25%
150-200
8%
200-250
Forwarded from Deleted Account
The maximum spacing of vertical reinforcement in RCC wall should not exceed ____ times the thickness of wall
Anonymous Quiz
9%
1
48%
1.5
17%
2
26%
3
Forwarded from Deleted Account
The group index method of designing flexible pavement is
Anonymous Quiz
41%
An empirical method based on the physical properties of the subgrade soil
46%
An empirical method based on the strength characteristics of the subgrade soil
11%
A semi empirical method
2%
None of these
✋እንደምን ከርማችኋል ወዳጆች?👷♀👷♂
.
🤝እንኳን በሰላም ኣገናኘን
.
🗒እንደተለመደው የመማማር ስራችን ለናንተ ውድ ቤተሰቦቻችን ለማድረስ ከምን ግዜ በላይ ዝግጁ ነን።
.
💪እናንተም ይህ ቻናል ሼር በማረግ ኣጋርነታቹ ኣሳዩን። እናመሰግናለን🙏
@etconp
.
🤝እንኳን በሰላም ኣገናኘን
.
🗒እንደተለመደው የመማማር ስራችን ለናንተ ውድ ቤተሰቦቻችን ለማድረስ ከምን ግዜ በላይ ዝግጁ ነን።
.
💪እናንተም ይህ ቻናል ሼር በማረግ ኣጋርነታቹ ኣሳዩን። እናመሰግናለን🙏
@etconp
👉ኢትዮጵያ ከ4 ሚሊዮን በላይ መኖሪያ ቤቶችን በከተማ ውስጥ ልትገነባ ነው
🚧የከተማ ልማትና ኮንስትራክሽን ሚኒስቴር በቀጣዮቹ አስር ዓመታት በተለያዩ ከተሞች አራት ሚሊዮን የመኖሪያ ቤቶችን ለመገንባት እቅድ መያዙን አስታውቋል።
.
🚧የከተማ ልማትና ኮንስትራክሽን ሚኒስትር አይሻ መሐመድ የሚኒስቴሩን የአሥር ዓመት ማስተር ፕላን ከዘርፉ ባለሙያዎችና ባለድርሻ አካላት ጋር የተወያዩ ሲሆን በውይይቱ ላይ የተሳተፉ ባለሙያዎችም ቤቶቹን በእኩልነትና በፍትሐዊነት ለማከፋፈል የተደራጀ የመረጃ አያያዝ ሥርዓት መዘርጋት አስፈላጊ እንደሆነ ገልፀዋል።
🚧የከተሞች የሥራ ዕድል ፈጠራ እንቅስቃሴና የማህበራዊ መሰረተ ልማቶችን የማስፋፋት ሥራ በአሥር ዓመቱ ማስተር ፕላን ትኩረት ተሰጥቶት እየተሰራበት መሆኑን ኢንጅነር አይሻ ተናግረዋል።
.
🚧በከተሞች ያለው የሕዝብ ብዛት ከ24 እስከ 40 ሚሊዮን ሕዝብ እንደሚያድግ ይጠበቃል ያሉም ሲሆን፤ የከተማ ነዋሪዎች ከጠቅላላው የአገሪቱ ዜጎች 35 በመቶውን ድርሻ ይይዛሉ በማለት ማስተር ፕላኑ እንደሚያመላክት ገልፀዋል።
🚧ሚኒስቴሩ በዘርፉ የሚታየውን ቅሬታ ለማቃለል በተቀመጠው ዕቅድ መሠረት የደንበኞችን እርካታ ወደ 80 በመቶ ለማሳደግ ከፍተኛ ጥረት እንደሚያደርግ የተገለፀ ሲሆን 30 በመቶ የሚሆኑ የከተማ መሬቶችም በአረንጓዴ ልማት ሥራዎች ይሸፈናሉ ተብሏል።
@etconp
🚧የከተማ ልማትና ኮንስትራክሽን ሚኒስቴር በቀጣዮቹ አስር ዓመታት በተለያዩ ከተሞች አራት ሚሊዮን የመኖሪያ ቤቶችን ለመገንባት እቅድ መያዙን አስታውቋል።
.
🚧የከተማ ልማትና ኮንስትራክሽን ሚኒስትር አይሻ መሐመድ የሚኒስቴሩን የአሥር ዓመት ማስተር ፕላን ከዘርፉ ባለሙያዎችና ባለድርሻ አካላት ጋር የተወያዩ ሲሆን በውይይቱ ላይ የተሳተፉ ባለሙያዎችም ቤቶቹን በእኩልነትና በፍትሐዊነት ለማከፋፈል የተደራጀ የመረጃ አያያዝ ሥርዓት መዘርጋት አስፈላጊ እንደሆነ ገልፀዋል።
🚧የከተሞች የሥራ ዕድል ፈጠራ እንቅስቃሴና የማህበራዊ መሰረተ ልማቶችን የማስፋፋት ሥራ በአሥር ዓመቱ ማስተር ፕላን ትኩረት ተሰጥቶት እየተሰራበት መሆኑን ኢንጅነር አይሻ ተናግረዋል።
.
🚧በከተሞች ያለው የሕዝብ ብዛት ከ24 እስከ 40 ሚሊዮን ሕዝብ እንደሚያድግ ይጠበቃል ያሉም ሲሆን፤ የከተማ ነዋሪዎች ከጠቅላላው የአገሪቱ ዜጎች 35 በመቶውን ድርሻ ይይዛሉ በማለት ማስተር ፕላኑ እንደሚያመላክት ገልፀዋል።
🚧ሚኒስቴሩ በዘርፉ የሚታየውን ቅሬታ ለማቃለል በተቀመጠው ዕቅድ መሠረት የደንበኞችን እርካታ ወደ 80 በመቶ ለማሳደግ ከፍተኛ ጥረት እንደሚያደርግ የተገለፀ ሲሆን 30 በመቶ የሚሆኑ የከተማ መሬቶችም በአረንጓዴ ልማት ሥራዎች ይሸፈናሉ ተብሏል።
@etconp
👉በአራዳ ክፍለ ከተማ በህንፃ ግንባታ ላይ በደረሰው የመደርመስ አደጋ የ1 ሰው ህይወት ሲያልፍ በ3 ሰዎች ላይ ጉዳት ደረሰ!
🚧በአዲስ አበባ አራዳ ክፍለ ከተማ ወረዳ አንድ ተብሎ በሚጠራው አካባቢ ካቶሊክ ቤተክርስቲያን ቅጥር ግቢ ውስጥ በሚደረግ የማስፋፊያ ግንባታ ስራ ላይ በተሰማሩ ሰራተኞች ጉርጓድ በመደርመሱ የአንድ ሰው ህይወት ማለፉን ፖሊስ አስታወቀ፡፡
.
🚧በሁለት ሰራተኞች ላይ ደግሞ ጉዳት ደርሶባቸዋል የአራዳ ቅ/ጽ ቤት ኦፕሬሽን ዘርፍ ኃላፊ ኮማንደር መስፍን እሽቱ እንደገለጹት አደጋው የደረሰው ትላንት ከጠዋቱ ሶስት ሰዓት ገደማ ነው በዕለቱ በግንባታ ስራ ላይ ከተሰማሩት 16 ሰራተኞች ውስጥ ሶስቱ ጉርጓድ ቁፋሮ ላይ ተሰማርተው በስራ ሂደት ላይ እንደነበሩ የመደርመስ አደጋው እንደደረሰባቸው ኮማንደር መስፍን ለኢቢሲ ተናግረዋል፡፡
🚧ፖሊስና የአደጋ ጊዜ ሰራተኞች 7 ሰዓታትን በፈጀው የህይወት አድን ስራ ሁለት ሰራተኞችን በህይወት ማግኘት የተቻለ ሲሆን ወደ አቤት ሆስፒታል ለህክምና መወሰዳቸውን ኮማንደር መስፍን ተናግረዋል፡፡
አንድ ሰራተኛ ግን ህይወቱ ማለፉን ኃላፊው ተናግረዋል የአደጋ ጊዜ ሰራተኞች ወደ ተደረመሰው ህንጻ ገብተው የህወት አድን ስራውን ለመስራት መግቢያ መንገድ አለመኖሩ የህይወት አድን ስራውን አደጋች እንዳደረገውም አመልክተዋል፡፡
Via ETV
#FirstSafety
@etconp
🚧በአዲስ አበባ አራዳ ክፍለ ከተማ ወረዳ አንድ ተብሎ በሚጠራው አካባቢ ካቶሊክ ቤተክርስቲያን ቅጥር ግቢ ውስጥ በሚደረግ የማስፋፊያ ግንባታ ስራ ላይ በተሰማሩ ሰራተኞች ጉርጓድ በመደርመሱ የአንድ ሰው ህይወት ማለፉን ፖሊስ አስታወቀ፡፡
.
🚧በሁለት ሰራተኞች ላይ ደግሞ ጉዳት ደርሶባቸዋል የአራዳ ቅ/ጽ ቤት ኦፕሬሽን ዘርፍ ኃላፊ ኮማንደር መስፍን እሽቱ እንደገለጹት አደጋው የደረሰው ትላንት ከጠዋቱ ሶስት ሰዓት ገደማ ነው በዕለቱ በግንባታ ስራ ላይ ከተሰማሩት 16 ሰራተኞች ውስጥ ሶስቱ ጉርጓድ ቁፋሮ ላይ ተሰማርተው በስራ ሂደት ላይ እንደነበሩ የመደርመስ አደጋው እንደደረሰባቸው ኮማንደር መስፍን ለኢቢሲ ተናግረዋል፡፡
🚧ፖሊስና የአደጋ ጊዜ ሰራተኞች 7 ሰዓታትን በፈጀው የህይወት አድን ስራ ሁለት ሰራተኞችን በህይወት ማግኘት የተቻለ ሲሆን ወደ አቤት ሆስፒታል ለህክምና መወሰዳቸውን ኮማንደር መስፍን ተናግረዋል፡፡
አንድ ሰራተኛ ግን ህይወቱ ማለፉን ኃላፊው ተናግረዋል የአደጋ ጊዜ ሰራተኞች ወደ ተደረመሰው ህንጻ ገብተው የህወት አድን ስራውን ለመስራት መግቢያ መንገድ አለመኖሩ የህይወት አድን ስራውን አደጋች እንዳደረገውም አመልክተዋል፡፡
Via ETV
#FirstSafety
@etconp
Forwarded from Ethio Construction Engineering (जॉर्डनो ג׳ורדנו ጆርዳኖ جوردانو จอร์แดโน่ JORDANO Ιορδάνοςஜார்டானோ)
👉Construction Notes
.
✍How do columns and beams work?
🚧Column is a structural functional part of a building that transfers the weight of the building received from the beam directly into the foundation.
📌Column fails by buckling.
🚧While Beam is also a structural functional part of a building that receives weight from the slab and transfer the weight directly to the column.
📌Beam fails majorly by deflection
#Constructionnotes
@etconp
.
✍How do columns and beams work?
🚧Column is a structural functional part of a building that transfers the weight of the building received from the beam directly into the foundation.
📌Column fails by buckling.
🚧While Beam is also a structural functional part of a building that receives weight from the slab and transfer the weight directly to the column.
📌Beam fails majorly by deflection
#Constructionnotes
@etconp
👉በኮንስትራክሽን ውል ስለ ንኡስ ተቋራጭነት(sub-contract)
.
📌ንኡስ ተቋራጭነት(sub contract) በፍትሀብሄር ህጉ አገላለጽ ከዋናው ተቋራጭ የተስማማ ሁለተኛ ተቋራጭ ይባላል፡፡
*ይሄውም ዋናው ተቋራጭ የግንባታ ውሉን ስራ በከፊል ለማስፈጸም ከአንድ ሶስተኛ ወገን ከሆነ ሰው ጋር የሚደረግ ውል ሁኔታ ነው፡፡
*ስለዚህ ንኡስ ተቋራጭነት የግንባታ ስራ ተቋራጮች ከአሰሪው ጋር ሊገነቡት ግዴታ የገቡበትን የግንባታ ስራ በከፊል ለሌላ ተቋራጭ በውል በሚያሰሩበት ጊዜ የሚነሳ ጉዳይ ነው፡፡
*(የፍ/ህ/ቁ 3201(2)) በንኡስ ተቋራጭነት ውል ውስጥ ሁለቱም ተዋዋይ ወገኖች ተቋራጮች ናቸው፡፡
📌የንኡስ ተቋራጭነት አይነቶች ስንት ናቸው?
*ንኡስ ተቋራጭነት ሁለት አይነት ነው፡፡
🚧በአሰሪው የሚታወቅ(Nominated sub-contracting) እና በአሰሪው የማይታወቅ(Non nominated sub-contracting) ተብሎ ይከፈላል::
*ከውጤት አንጻር ተመሳሳይ ቢሆኑም ንኡስ ተቋራጭነቱን አሰሪው የፈቀደውና ያወቀው የሆነ እንደሆነ ጉልህ የሆነው ልዩነቱ ዋናው ተቋራጭ ከመዘግየት ቅጣት ነጻ ይሆናል፡፡(የፍ/ህ/ቁ 3206)
📌ንኡስ ተቋራጮች ለሰሩበት ክፍያ ከማን መጠየቅ ይችላሉ?
*ንኡስ ተቋራጮች በሁለት አማራጭ መንገድ ከፍያ ሊያገኙ የሚችሉበት የህግ አግባብ አለ፡፡*አንደኛው ከዋናው ተቋራጭ ላይ ሲሆን ሌላኛው ደግሞ ከአሰሪው client/ ክፍያ የሚያገኙበት ሁኔታ ነው፡፡
**ይሄውም ንኡስ ተቋራጮች ለሰሩት ስራ በውላቸው መሰረት ከዋናው ተቋራጭ ክፍያ የመጠየቅ መብት ይኖራቸዋል፡፡(የፍ/ህ/ቁ 1755፣1756) ምክንያቱም ውል በተዋዋይ ወገኖች መካከል ህግ ነው፡፡(የፍ/ህ/ቁ1731)
*በተጨማሪም የፍትሀብሄር ህግ አንቀጽ 3040 በአንድ የህንጻ ስራ ተቋራጭነት ውስጥ የሚሰሩ ስራ ተቋራጮች ወይም ሰራተኞች የሰሩበትን ስራ ዋጋ ለመከፈል ክሳቸውን ባቀረቡበት ጊዜ አሰሪው ለስራ ተቋራጩ ሊከፍል በሚገባው ገንዘብ መጠን ባሰሪው ላይ በቀጥታ ገንዘባቸውን ለመጠየቅ መብት አላቸው በሚል ይደነግጋል፡፡
*እንዲሁም በፍትሀብሄር ህግ አንቀጽ 3295 ላይ በግልጽ እንደተደነገገው በአስተዳደር መስሪያ ቤት የታወቀ ከዋናው ተቋራጭ ውስጥ ሁለተኛ ተቋራጭ የሆነ ሰው ላከናወነው የግንባታ ስራ ዋጋውን በቀጥታ ከአሰሪው መስሪያ ቤት/client/ ለመቀበል ይችላል፡፡
*ይሄውም የአስተዳደር መስሪያ ቤት ውሎችን የሚመለከት ሲሆን ለቀጥታ ለአከፋፈሉ በቅድመ ሁኔታነትም ንኡስ ተቋራጩ የሚሰራው የስራ አይነትና ዋጋውም በንኡስ ተቋራጭነት ውሉ ላይ በግልጽ የተመለከተ እንደሆነ እና ዋናው ተቋራጭም በቀጥታ ከአሰሪው ስለሚከፈልበት ሁኔታ ፈቃዱን የሰጠበት እንደሆነ ነው፡፡
*ስለዚህ ንኡስ ተቋራጮች እንደዚህ በልዩ ሁኔታ ከዋናው አሰሪ ላይም በቀጥታ ክፍያ ለመጠየቅ መብት ይኖራቸዋል ማለት ነው፡፡
📌ሌላው በአስተዳደር መስሪያ ቤት የኮንስትራክሽን ውሎች ውስጥ ንኡስ ተቋራጮች በማናቸውም አኳኋን የቅድሚያ ክፍያ ገንዘብ ለመቀበል እንደማይችሉ የፍትሀብሄር ህግ አንቀጽ 3296 ይደነግጋል፡፡
*ስለዚህ ንኡስ ተቋራጮች ኖምኔትድ ሰብኮንትራክተር ቢሆኑም እንኳ ቅድሚያ ክፍያ መጠየቅ አይችሉም ማለት ነው፡፡*ይህ ማለት ግን በንኡስ ተቋራጭነት ውላቸው ከተስማሙ ከዋናው ተቋራጭ ግን ቅድሚያ ክፍያ ለመውሰድ የሚከለክላቸው አይሆንም የሚል ሀሳብ አለኝ፡፡
✍በ ጉባዔ አሰፋ
#ConstructionLaw
@etconp
.
📌ንኡስ ተቋራጭነት(sub contract) በፍትሀብሄር ህጉ አገላለጽ ከዋናው ተቋራጭ የተስማማ ሁለተኛ ተቋራጭ ይባላል፡፡
*ይሄውም ዋናው ተቋራጭ የግንባታ ውሉን ስራ በከፊል ለማስፈጸም ከአንድ ሶስተኛ ወገን ከሆነ ሰው ጋር የሚደረግ ውል ሁኔታ ነው፡፡
*ስለዚህ ንኡስ ተቋራጭነት የግንባታ ስራ ተቋራጮች ከአሰሪው ጋር ሊገነቡት ግዴታ የገቡበትን የግንባታ ስራ በከፊል ለሌላ ተቋራጭ በውል በሚያሰሩበት ጊዜ የሚነሳ ጉዳይ ነው፡፡
*(የፍ/ህ/ቁ 3201(2)) በንኡስ ተቋራጭነት ውል ውስጥ ሁለቱም ተዋዋይ ወገኖች ተቋራጮች ናቸው፡፡
📌የንኡስ ተቋራጭነት አይነቶች ስንት ናቸው?
*ንኡስ ተቋራጭነት ሁለት አይነት ነው፡፡
🚧በአሰሪው የሚታወቅ(Nominated sub-contracting) እና በአሰሪው የማይታወቅ(Non nominated sub-contracting) ተብሎ ይከፈላል::
*ከውጤት አንጻር ተመሳሳይ ቢሆኑም ንኡስ ተቋራጭነቱን አሰሪው የፈቀደውና ያወቀው የሆነ እንደሆነ ጉልህ የሆነው ልዩነቱ ዋናው ተቋራጭ ከመዘግየት ቅጣት ነጻ ይሆናል፡፡(የፍ/ህ/ቁ 3206)
📌ንኡስ ተቋራጮች ለሰሩበት ክፍያ ከማን መጠየቅ ይችላሉ?
*ንኡስ ተቋራጮች በሁለት አማራጭ መንገድ ከፍያ ሊያገኙ የሚችሉበት የህግ አግባብ አለ፡፡*አንደኛው ከዋናው ተቋራጭ ላይ ሲሆን ሌላኛው ደግሞ ከአሰሪው client/ ክፍያ የሚያገኙበት ሁኔታ ነው፡፡
**ይሄውም ንኡስ ተቋራጮች ለሰሩት ስራ በውላቸው መሰረት ከዋናው ተቋራጭ ክፍያ የመጠየቅ መብት ይኖራቸዋል፡፡(የፍ/ህ/ቁ 1755፣1756) ምክንያቱም ውል በተዋዋይ ወገኖች መካከል ህግ ነው፡፡(የፍ/ህ/ቁ1731)
*በተጨማሪም የፍትሀብሄር ህግ አንቀጽ 3040 በአንድ የህንጻ ስራ ተቋራጭነት ውስጥ የሚሰሩ ስራ ተቋራጮች ወይም ሰራተኞች የሰሩበትን ስራ ዋጋ ለመከፈል ክሳቸውን ባቀረቡበት ጊዜ አሰሪው ለስራ ተቋራጩ ሊከፍል በሚገባው ገንዘብ መጠን ባሰሪው ላይ በቀጥታ ገንዘባቸውን ለመጠየቅ መብት አላቸው በሚል ይደነግጋል፡፡
*እንዲሁም በፍትሀብሄር ህግ አንቀጽ 3295 ላይ በግልጽ እንደተደነገገው በአስተዳደር መስሪያ ቤት የታወቀ ከዋናው ተቋራጭ ውስጥ ሁለተኛ ተቋራጭ የሆነ ሰው ላከናወነው የግንባታ ስራ ዋጋውን በቀጥታ ከአሰሪው መስሪያ ቤት/client/ ለመቀበል ይችላል፡፡
*ይሄውም የአስተዳደር መስሪያ ቤት ውሎችን የሚመለከት ሲሆን ለቀጥታ ለአከፋፈሉ በቅድመ ሁኔታነትም ንኡስ ተቋራጩ የሚሰራው የስራ አይነትና ዋጋውም በንኡስ ተቋራጭነት ውሉ ላይ በግልጽ የተመለከተ እንደሆነ እና ዋናው ተቋራጭም በቀጥታ ከአሰሪው ስለሚከፈልበት ሁኔታ ፈቃዱን የሰጠበት እንደሆነ ነው፡፡
*ስለዚህ ንኡስ ተቋራጮች እንደዚህ በልዩ ሁኔታ ከዋናው አሰሪ ላይም በቀጥታ ክፍያ ለመጠየቅ መብት ይኖራቸዋል ማለት ነው፡፡
📌ሌላው በአስተዳደር መስሪያ ቤት የኮንስትራክሽን ውሎች ውስጥ ንኡስ ተቋራጮች በማናቸውም አኳኋን የቅድሚያ ክፍያ ገንዘብ ለመቀበል እንደማይችሉ የፍትሀብሄር ህግ አንቀጽ 3296 ይደነግጋል፡፡
*ስለዚህ ንኡስ ተቋራጮች ኖምኔትድ ሰብኮንትራክተር ቢሆኑም እንኳ ቅድሚያ ክፍያ መጠየቅ አይችሉም ማለት ነው፡፡*ይህ ማለት ግን በንኡስ ተቋራጭነት ውላቸው ከተስማሙ ከዋናው ተቋራጭ ግን ቅድሚያ ክፍያ ለመውሰድ የሚከለክላቸው አይሆንም የሚል ሀሳብ አለኝ፡፡
✍በ ጉባዔ አሰፋ
#ConstructionLaw
@etconp
Ethio Construction Engineering
What’s the difference between Young’s modulus of elasticity and modulus of rigidity? Discuss @cotmp @etconp
Main Difference – Modulus of Elasticity vs. Modulus of Rigidity
➪ The main difference between modulus of elasticity and modulus of rigidity is that the modulus of elasticity describes how a material gets deformed when a force is applied at right angles to a surface of an object, causing the material to elongate or shorten while the modulus of rigidity describes how a material gets deformed when a force is applied parallel to a surface of an object, causing one of the surfaces to become shifted with respect to another surface of the same object.
What is the Modulus of Elasticity ?
Modulus of elasticity (Young modulus) is a number that describes the ratio of stress to strain in an object that is being deformed by a force that is perpendicular to a surface of an object.
➪ σ = F
A
➪ E = σ
ε
➪ σ = E x ε
Where ; E = Young’s modulus of
elasticity
F = applied force
A = surface tension area
σ = stress
ε = strain (deformation per unit
length)
What is the Modulus of Rigidity ?
Modulus of rigidity (shear modulus) is a number that gives the Shear stress acting on a material per unit area. The deforming force acts parallel to a face of the object, causing one face to become displaced with respect to another face.
➪ σ = F
A
➪ G = σ
ε
➪ σ = G x ε
Where ; G = Young’s modulus of
Rigidity
F = applied force
A = surface tension area
σ = stress
ε = strain (deformation per unit
length)
Relationship between Modulus of Elasticity and Modulus of Rigidity
➪ G = E
2( 1+ν)
➪ E = 2G( 1+ν)
Where ; ν = possion’s ratio
Based on this we will have quiz
በዚህ መሰረት quiz ይኖረናል
@etconp
➪ The main difference between modulus of elasticity and modulus of rigidity is that the modulus of elasticity describes how a material gets deformed when a force is applied at right angles to a surface of an object, causing the material to elongate or shorten while the modulus of rigidity describes how a material gets deformed when a force is applied parallel to a surface of an object, causing one of the surfaces to become shifted with respect to another surface of the same object.
What is the Modulus of Elasticity ?
Modulus of elasticity (Young modulus) is a number that describes the ratio of stress to strain in an object that is being deformed by a force that is perpendicular to a surface of an object.
➪ σ = F
A
➪ E = σ
ε
➪ σ = E x ε
Where ; E = Young’s modulus of
elasticity
F = applied force
A = surface tension area
σ = stress
ε = strain (deformation per unit
length)
What is the Modulus of Rigidity ?
Modulus of rigidity (shear modulus) is a number that gives the Shear stress acting on a material per unit area. The deforming force acts parallel to a face of the object, causing one face to become displaced with respect to another face.
➪ σ = F
A
➪ G = σ
ε
➪ σ = G x ε
Where ; G = Young’s modulus of
Rigidity
F = applied force
A = surface tension area
σ = stress
ε = strain (deformation per unit
length)
Relationship between Modulus of Elasticity and Modulus of Rigidity
➪ G = E
2( 1+ν)
➪ E = 2G( 1+ν)
Where ; ν = possion’s ratio
Based on this we will have quiz
በዚህ መሰረት quiz ይኖረናል
@etconp
Telegram
Ethio Construction Engineering
🔨 World Construction Engineering
Latest updates, tips, and tutorials on building, civil engineering, and construction in World.
Learn, build, and grow with us!
📨 @Philemona7 Or @ETCONpBOT
For Ad:- https://telega.io/c/etconp
Latest updates, tips, and tutorials on building, civil engineering, and construction in World.
Learn, build, and grow with us!
📨 @Philemona7 Or @ETCONpBOT
For Ad:- https://telega.io/c/etconp
👉በአዲስ አበባ በህንጻ ግንባታ ሰራተኞች ላይ በደረሰ አደጋ ጉዳት ደረሰ!
🚧በአዲስ አበባ ወሎ ሰፈር አካባቢ እየተገነባ ባለ ህንጻ ላይ ዛሬ ቅዳሜ ሐምሌ 18፤ 2012 ጠዋት ላይ በደረሰ አደጋ አንድ ሰው ሲሞት በ9 ሰዎች ላይ ከባድ ጉዳት መድረሱን የአዲስ አበባ ከተማ የእሳትና የአደጋ ስጋት ስራ አመራር ኮሚሽን ገለጸ።
.
🚧በህንጻው ግንባታ ላይ የተሰማሩ 55 ሰራተኞችንም ጉዳት ሳይደረስባቸው በህይወት መትረፋቸውንም አስታውቋል። በቦሌ ክፍለ ከተማ ወረዳ 2 የሚገኘው ይህ ህንጻ በኢንፎርሜሽን መረብ ደህንነት ኤጀንሲ (INSA) መገንባት የጀመረ ሲሆን ግንባታው ሲገባደድ ኤጀንሲውን ጨምሮ የሰላም ሚኒስቴር እና ሌሎች ተቋማትን በውስጡ ይይዛል ተብሎ የሚጠበቅ ነው።
.
🚧ዛሬ ከጠዋቱ ሶስት ሰዓት ተኩል ገደማ በህንጻው ላይ የደረሰው አደጋ መንስኤ በውጭ ግድግዳ ላይ የተለጠፉ የሴራሚክ ልባሶች መንሸራተት ያስከተለው እንደሆነ አንድ የነፍስ አድን ሰራተኛ ተናግረዋል።
የሴራሚክ ልባሶቹ፤ በግንባታ ሰራተኛ መወጣጫዎች (ስካፎሊዲንግ) ላይ በማረፋቸው የመደርመስ አደጋ መከሰቱን እና ጉዳት መድረሱን አክለዋል። በመወጣጫ መደርመስ አደጋው ጽኑ ጉዳት ከደረሰባቸው ሰራተኞች መካከል አንድ ግለሰብ ሆስፒታል ሲደርስ ህይወቱ ማለፉን የአዲስ አበባ ከተማ የእሳትና የአደጋ ስጋት ስራ አመራር ኮሚሽን አንድ ባለሙያ ለ“ኢትዮጵያ ኢንሳይደር” ገልጸዋል ከባድ የመቁሰል አደጋ የደረሰባቸው ዘጠኝ የግንባታ ሰራተኞች በሆስፒታል በህክምና ላይ እንደሚገኙም አስረድተዋል።
Via ኢትዮጵያ ኢንሳይደር
#FirstSafety
@etconp
🚧በአዲስ አበባ ወሎ ሰፈር አካባቢ እየተገነባ ባለ ህንጻ ላይ ዛሬ ቅዳሜ ሐምሌ 18፤ 2012 ጠዋት ላይ በደረሰ አደጋ አንድ ሰው ሲሞት በ9 ሰዎች ላይ ከባድ ጉዳት መድረሱን የአዲስ አበባ ከተማ የእሳትና የአደጋ ስጋት ስራ አመራር ኮሚሽን ገለጸ።
.
🚧በህንጻው ግንባታ ላይ የተሰማሩ 55 ሰራተኞችንም ጉዳት ሳይደረስባቸው በህይወት መትረፋቸውንም አስታውቋል። በቦሌ ክፍለ ከተማ ወረዳ 2 የሚገኘው ይህ ህንጻ በኢንፎርሜሽን መረብ ደህንነት ኤጀንሲ (INSA) መገንባት የጀመረ ሲሆን ግንባታው ሲገባደድ ኤጀንሲውን ጨምሮ የሰላም ሚኒስቴር እና ሌሎች ተቋማትን በውስጡ ይይዛል ተብሎ የሚጠበቅ ነው።
.
🚧ዛሬ ከጠዋቱ ሶስት ሰዓት ተኩል ገደማ በህንጻው ላይ የደረሰው አደጋ መንስኤ በውጭ ግድግዳ ላይ የተለጠፉ የሴራሚክ ልባሶች መንሸራተት ያስከተለው እንደሆነ አንድ የነፍስ አድን ሰራተኛ ተናግረዋል።
የሴራሚክ ልባሶቹ፤ በግንባታ ሰራተኛ መወጣጫዎች (ስካፎሊዲንግ) ላይ በማረፋቸው የመደርመስ አደጋ መከሰቱን እና ጉዳት መድረሱን አክለዋል። በመወጣጫ መደርመስ አደጋው ጽኑ ጉዳት ከደረሰባቸው ሰራተኞች መካከል አንድ ግለሰብ ሆስፒታል ሲደርስ ህይወቱ ማለፉን የአዲስ አበባ ከተማ የእሳትና የአደጋ ስጋት ስራ አመራር ኮሚሽን አንድ ባለሙያ ለ“ኢትዮጵያ ኢንሳይደር” ገልጸዋል ከባድ የመቁሰል አደጋ የደረሰባቸው ዘጠኝ የግንባታ ሰራተኞች በሆስፒታል በህክምና ላይ እንደሚገኙም አስረድተዋል።
Via ኢትዮጵያ ኢንሳይደር
#FirstSafety
@etconp
👉የ ኮንስትራክሽን ውሎችን ለሌላ መልቀቅ(Assignment) ምን ማለት ነው?
.
📌ውሎችን ለሌላ መልቀቅ (Assignment) ዋናው ተቋራጭ የግንባታ ውሉን ስራ በሙሉ እንዲፈጽምለት ለአንድ ሶስተኛ ወገን ለሆነ ሲያስተላልፍ ነው፡፡ (የፍ/ህ/ቁ 3201(1)) *ይሄውም ከንኡስ ተቋራጭነት ጋር ሁኔታው አንድ አይነት ሲሆን በዋናነት ልዩነቱ ዋናው ተቋራጭ ለሌላ ተቋራጭ(ለንኡስ ተቋራጩ) የሚያሰራው ሙሉውን የግንባታ ስራ ነው፡፡
*በዚህ ውል ውስጥ ሁለቱም ተዋዋይ ወገኖች ተቋራጮች ናቸው፡፡
**ለምሳሌ "ሀ" የተባለ ተቋራጭ "ለ" ከተባለ አሰሪ ጋር የኮንስትራክሽን ውል ገባ እንበል፡፡የግንባታ ስራው ደግሞ ትምህርት ቤት ቢሆን እና ሁለት ብሎክ መማሪያ ህንጻ እና አንድ ሽንት ቤት ግንባታ ቢሆን እንበል፡፡
እንግዲህ ዋናው ተቋራጭ "ሀ" ከግንባታ ስራው ውስጥ አንዱን ብሎክ መማሪያ ክፍል "ሐ" ለተባለ ተቋራጭ በውል ሰጥቶ ቢያስገነባው በ "ሀ" እና "ሐ" መካከል የሚደረገው ውል የንኡስ ተቋራጭነት ውል ይባላል ማለት ነው፡፡
*በሌላ በኩል ምናልባት ዋናው ተቋራጭ "ሀ" ሁሉንም ግንባታ ማለትም ሁለት ብሎክ መማሪያ ህንጻ እና አንድ ሽንት ቤት "መ" ለተባለ ተቋራጭ በውል ሰጥቶ ቢያስገነባው በዋናው ተቋራጭ "ሀ" እና "መ" በተባለው ተቋራጭ መካከል የተደረገው ውል በንኡስ ተቋራጭነት ሳይሆን ውሎችን ለሌላ መልቀቅ(Assignment) በሚለው የህግ ክፍል የሚጠቃለል ይሆናል ማለት ነወ፡፡
.
📌ጀኔራል ኮንዲሽኖች ንኡስ ተቋራጭነትን በምን ሁኔታ ያስቀምጡታል?
🚧ፒፒኤ 2011 ስለ ንኡስ ተቋራጭነት አስመልክቶ በክሎስ 14 ላይ አስቀምጧል፡፡
*በዚህም የንኡስ ተቋራጭነት ውሉ በጽሁፍ መሆን እንዳለበት እና ይሄውም የቫሊዲቲ መስፈርት ስለመሆኑ ይገልጻል፡፡
*ንኡስ ተቋራጮች በዋናው የኮንስትራክሽን ውል ላይ ያልታወቁ( Non nominated) የሆኑ እንደሆነ ዋናው ተቋራጭ ሌሎች ንኡስ ተቋራጮችን የግንባታ ስራ ለማሰራት የአሰሪውን የጽሁፍ ፈቃድ ማግኘት ይኖርበታል በሚል ያስቀምጣል፡፡
*የንኡስ ተቋራጭነት ውሉም ከዋናው ውል ጋር የተጣጣመ እና በዋናው ውል ጭምር የሚገዛ እንደሚሆን ክሎስ 14.3 ላይ ተቀምጧል፡፡
*ዋናው ተቋራጭ የአሰሪው መስሪያ ቤት ሳይፈቅድለት የንኡስ ተቋራጭነት ውል የገባ እንደሆነ አሰሪው ፎርማል ማስጠንቀቂያ መስጠት ሳያስፈልገው ውልን ማቋረጥ እንደሚችል ክሎስ 14.8 ያስቀምጣል፡፡
*ሌላው ንኡስ ተቋራጩ የግንባታ ስራ ለማከናወን ብቃት የሚያንሰው እንደሆነ አሰሪው መስሪያ ቤት ወይም መሀንዲሱ ዋናውን ተቋራጭ ሌላ ብቃት ያለው ንኡስ ተቋራጭ እንዲያመጣ ወይም ስራውን በራሱ እንዲያከናውን ሊጠይቀው እንደሚችል ክሎስ 14.9 ይገልጻል፡፡
🚧ፊዲክ ሬድ ቡክ 1999-በዚህ ጀኔራል ኮንዲሽን ክሎስ 4.4 ላይ ዋናው ተቋራጭ ሙሉውን የግንባታ ስራ ለንኡስ ተቋራጭ መስጠት እንደማይችል ተቀምጧል፡፡
*እንዲሁም በስፔሻል ኮንዲሽን ላይ በሌላ ሁኔታ ካልተቀመጠ በስተቀር ንኡስ ተቋራጩ በዋናው የኮንስትራክሽን ውል ላይ ስሙ የተጠቀሰ በሆነ ጊዜ በንኡስ ተቋራጭነት ለማሰራት የመሀንዲሱን ፈቃድ መጠየቅ አይጠበቅበትም፡፡
*ሆኖም የታሰበው ንኡስ ተቋራጭ አዲስ እና በዋናው ውል ስሙ ያልተጠቀሰ የሆነ እንደሆነ በቅድሚያ የመሀንዲሱን ፈቃድ ማግኘት አስፈላጊ ይሆናል፡፡
*ዋናው ተቋራጭ ለመሀንዲሱ በተለይ ንኡስ ተቋራጩ የሚሰራውን የግንባታ ስራ መጀመሪያ ቀን/ኮመንስመንት ዴት/ ተብሎ የታሰበውን ጊዜ ከ28 ቀን ባላነሰ ጊዜ ማስታወቅ ሲኖርበት ንኡስ ተቋራጩ በትክክል በሳይት ላይ ስራ የጀመረበትንም ቀን ማሳወቅ ይኖርበታል፡፡
🚧Nominated subcontractors በሚመለከት በክሎስ 5.1 ላይ ትርጉም ተሰጥቶታል፡፡
*በዚህም መሰረት ኖምኔትድ ሰብ ኮንትራክተር የሚባለው በዋናው የኮንስትራክሽን ውል ላይ ኖምኔትድ ሰብ ኮንትራክተር መሆኑ የተገለጸ እንደሆነ ወይም ኢንጅኒየሩ ለተቋራጩ ንኡስ ተቋራጭ መርጦለት እንዲያሰራው ያዘዘው የሆነ እንደሆነ ነው፡፡
.
🚧ለኖምኔትድ ሰብ ኮንትራክተሩ ክፍያ የሚፈጸምለት በንኡስ ተቋራጭነት ውሉ አግባብ በመሀንዲሱ በሚሰጥ የክፍያ ሰርተፍኬት መሰረት ሲሆን ክፍያውን የሚፈጽመውም ዋናው ተቋራጭ ስለመሆኑ ክሎስ 5.3 ላይ ተቀምጧል፡፡
✍በ ጉባዔ አሰፋ
#ConstructionLaw
@etconp
.
📌ውሎችን ለሌላ መልቀቅ (Assignment) ዋናው ተቋራጭ የግንባታ ውሉን ስራ በሙሉ እንዲፈጽምለት ለአንድ ሶስተኛ ወገን ለሆነ ሲያስተላልፍ ነው፡፡ (የፍ/ህ/ቁ 3201(1)) *ይሄውም ከንኡስ ተቋራጭነት ጋር ሁኔታው አንድ አይነት ሲሆን በዋናነት ልዩነቱ ዋናው ተቋራጭ ለሌላ ተቋራጭ(ለንኡስ ተቋራጩ) የሚያሰራው ሙሉውን የግንባታ ስራ ነው፡፡
*በዚህ ውል ውስጥ ሁለቱም ተዋዋይ ወገኖች ተቋራጮች ናቸው፡፡
**ለምሳሌ "ሀ" የተባለ ተቋራጭ "ለ" ከተባለ አሰሪ ጋር የኮንስትራክሽን ውል ገባ እንበል፡፡የግንባታ ስራው ደግሞ ትምህርት ቤት ቢሆን እና ሁለት ብሎክ መማሪያ ህንጻ እና አንድ ሽንት ቤት ግንባታ ቢሆን እንበል፡፡
እንግዲህ ዋናው ተቋራጭ "ሀ" ከግንባታ ስራው ውስጥ አንዱን ብሎክ መማሪያ ክፍል "ሐ" ለተባለ ተቋራጭ በውል ሰጥቶ ቢያስገነባው በ "ሀ" እና "ሐ" መካከል የሚደረገው ውል የንኡስ ተቋራጭነት ውል ይባላል ማለት ነው፡፡
*በሌላ በኩል ምናልባት ዋናው ተቋራጭ "ሀ" ሁሉንም ግንባታ ማለትም ሁለት ብሎክ መማሪያ ህንጻ እና አንድ ሽንት ቤት "መ" ለተባለ ተቋራጭ በውል ሰጥቶ ቢያስገነባው በዋናው ተቋራጭ "ሀ" እና "መ" በተባለው ተቋራጭ መካከል የተደረገው ውል በንኡስ ተቋራጭነት ሳይሆን ውሎችን ለሌላ መልቀቅ(Assignment) በሚለው የህግ ክፍል የሚጠቃለል ይሆናል ማለት ነወ፡፡
.
📌ጀኔራል ኮንዲሽኖች ንኡስ ተቋራጭነትን በምን ሁኔታ ያስቀምጡታል?
🚧ፒፒኤ 2011 ስለ ንኡስ ተቋራጭነት አስመልክቶ በክሎስ 14 ላይ አስቀምጧል፡፡
*በዚህም የንኡስ ተቋራጭነት ውሉ በጽሁፍ መሆን እንዳለበት እና ይሄውም የቫሊዲቲ መስፈርት ስለመሆኑ ይገልጻል፡፡
*ንኡስ ተቋራጮች በዋናው የኮንስትራክሽን ውል ላይ ያልታወቁ( Non nominated) የሆኑ እንደሆነ ዋናው ተቋራጭ ሌሎች ንኡስ ተቋራጮችን የግንባታ ስራ ለማሰራት የአሰሪውን የጽሁፍ ፈቃድ ማግኘት ይኖርበታል በሚል ያስቀምጣል፡፡
*የንኡስ ተቋራጭነት ውሉም ከዋናው ውል ጋር የተጣጣመ እና በዋናው ውል ጭምር የሚገዛ እንደሚሆን ክሎስ 14.3 ላይ ተቀምጧል፡፡
*ዋናው ተቋራጭ የአሰሪው መስሪያ ቤት ሳይፈቅድለት የንኡስ ተቋራጭነት ውል የገባ እንደሆነ አሰሪው ፎርማል ማስጠንቀቂያ መስጠት ሳያስፈልገው ውልን ማቋረጥ እንደሚችል ክሎስ 14.8 ያስቀምጣል፡፡
*ሌላው ንኡስ ተቋራጩ የግንባታ ስራ ለማከናወን ብቃት የሚያንሰው እንደሆነ አሰሪው መስሪያ ቤት ወይም መሀንዲሱ ዋናውን ተቋራጭ ሌላ ብቃት ያለው ንኡስ ተቋራጭ እንዲያመጣ ወይም ስራውን በራሱ እንዲያከናውን ሊጠይቀው እንደሚችል ክሎስ 14.9 ይገልጻል፡፡
🚧ፊዲክ ሬድ ቡክ 1999-በዚህ ጀኔራል ኮንዲሽን ክሎስ 4.4 ላይ ዋናው ተቋራጭ ሙሉውን የግንባታ ስራ ለንኡስ ተቋራጭ መስጠት እንደማይችል ተቀምጧል፡፡
*እንዲሁም በስፔሻል ኮንዲሽን ላይ በሌላ ሁኔታ ካልተቀመጠ በስተቀር ንኡስ ተቋራጩ በዋናው የኮንስትራክሽን ውል ላይ ስሙ የተጠቀሰ በሆነ ጊዜ በንኡስ ተቋራጭነት ለማሰራት የመሀንዲሱን ፈቃድ መጠየቅ አይጠበቅበትም፡፡
*ሆኖም የታሰበው ንኡስ ተቋራጭ አዲስ እና በዋናው ውል ስሙ ያልተጠቀሰ የሆነ እንደሆነ በቅድሚያ የመሀንዲሱን ፈቃድ ማግኘት አስፈላጊ ይሆናል፡፡
*ዋናው ተቋራጭ ለመሀንዲሱ በተለይ ንኡስ ተቋራጩ የሚሰራውን የግንባታ ስራ መጀመሪያ ቀን/ኮመንስመንት ዴት/ ተብሎ የታሰበውን ጊዜ ከ28 ቀን ባላነሰ ጊዜ ማስታወቅ ሲኖርበት ንኡስ ተቋራጩ በትክክል በሳይት ላይ ስራ የጀመረበትንም ቀን ማሳወቅ ይኖርበታል፡፡
🚧Nominated subcontractors በሚመለከት በክሎስ 5.1 ላይ ትርጉም ተሰጥቶታል፡፡
*በዚህም መሰረት ኖምኔትድ ሰብ ኮንትራክተር የሚባለው በዋናው የኮንስትራክሽን ውል ላይ ኖምኔትድ ሰብ ኮንትራክተር መሆኑ የተገለጸ እንደሆነ ወይም ኢንጅኒየሩ ለተቋራጩ ንኡስ ተቋራጭ መርጦለት እንዲያሰራው ያዘዘው የሆነ እንደሆነ ነው፡፡
.
🚧ለኖምኔትድ ሰብ ኮንትራክተሩ ክፍያ የሚፈጸምለት በንኡስ ተቋራጭነት ውሉ አግባብ በመሀንዲሱ በሚሰጥ የክፍያ ሰርተፍኬት መሰረት ሲሆን ክፍያውን የሚፈጽመውም ዋናው ተቋራጭ ስለመሆኑ ክሎስ 5.3 ላይ ተቀምጧል፡፡
✍በ ጉባዔ አሰፋ
#ConstructionLaw
@etconp
👉Construction notes
.
🚧Why is concrete strong in compression?
.
📌Concrete is a heterogeneous material which is made up of cement (15–20%), Sand (25–30%), Coarse Aggregate (55–60%) and air (2–4%).
.
📌Compressive strength of concrete is based on the least of the compressive strength of cement-sand mixture, coarse aggregate, and the bond between C/S mixture and coarse aggregate.
.
📌Usually all three of these are comparable in compressive strength and none of them are particularity weak in compression hence, compressive strength of concrete is quite high as compared to its strength in tension.
.
📌Moreover given the fact that coarse aggregate occupies largest volume in concrete, its has the largest effect on the compressive strength of concrete. Usually coarse aggregate is the strongest of the three components in concrete, unless it is a high strength concrete (fc’>8,000 psi) in which case failure can occur due to shearing of coarse aggregates.
#Constructionnotes
@etconp
.
🚧Why is concrete strong in compression?
.
📌Concrete is a heterogeneous material which is made up of cement (15–20%), Sand (25–30%), Coarse Aggregate (55–60%) and air (2–4%).
.
📌Compressive strength of concrete is based on the least of the compressive strength of cement-sand mixture, coarse aggregate, and the bond between C/S mixture and coarse aggregate.
.
📌Usually all three of these are comparable in compressive strength and none of them are particularity weak in compression hence, compressive strength of concrete is quite high as compared to its strength in tension.
.
📌Moreover given the fact that coarse aggregate occupies largest volume in concrete, its has the largest effect on the compressive strength of concrete. Usually coarse aggregate is the strongest of the three components in concrete, unless it is a high strength concrete (fc’>8,000 psi) in which case failure can occur due to shearing of coarse aggregates.
#Constructionnotes
@etconp
Ethio Construction Engineering
Main Difference – Modulus of Elasticity vs. Modulus of Rigidity ➪ The main difference between modulus of elasticity and modulus of rigidity is that the modulus of elasticity describes how a material gets deformed when a force is applied at right angles to…
Given the modulus of elasticity (E) and the poission’s ratio (ν), calculate the shear modulus of elasticity (G), where
E = 207 X 10⁹ N/m² (steel)
ν = 0.28 (steel)
1. 108 x 10⁸ N/m²
2. 80.8 X 10⁹ N/m² ....
3. 108 x 10⁹ N/m²
4. 80.8 x 10⁸ N/m²
You can use the formula from the previous post 👆🏾👆🏾
@etconp
E = 207 X 10⁹ N/m² (steel)
ν = 0.28 (steel)
1. 108 x 10⁸ N/m²
2. 80.8 X 10⁹ N/m² ....
3. 108 x 10⁹ N/m²
4. 80.8 x 10⁸ N/m²
You can use the formula from the previous post 👆🏾👆🏾
@etconp
Ethio Construction Engineering via @like
Given the modulus of elasticity (E) and the poission’s ratio (ν), calculate the shear modulus of elasticity (G), where E = 207 X 10⁹ N/m² (steel) ν = 0.28 (steel) 1. 108 x 10⁸ N/m² 2. 80.8 X 10⁹ N/m² .... 3. 108 x 10⁹ N/m² 4. 80.8 x 10⁸ N/m² You…
Given the modulus of elasticity (E) and the poission’s ratio (ν), calculate the shear modulus of elasticity (G), where
E = 207 X 10⁹ N/m² (steel) ν = 0.28 (steel)
E = 207 X 10⁹ N/m² (steel) ν = 0.28 (steel)
Anonymous Quiz
19%
108 x 10⁸ N/m²
46%
80.8 X 10⁹ N/m²
26%
108 x 10⁹ N/m²
9%
80.8 x 10⁸ N/m²