👉"በግንባታ ሂደት ውስጥ በአሰሪ ተቋማትና በስራ ተቋራጮች መካከል የኮንስትራክሽን አለመግባባቶች ሲፈጠሩ ከፍርድ ቤት ውጭ የሆኑ መፍቻ መንገዶችን ተጠቅሞ ለችግሩ እልባት መስጠት አዋጭ መሆኑ ተገለፀ፡፡
🚧ይህ የተገለፀው የአዲስ አበባ ከተማ መንገዶች ባለስልጣን ከኢትዮጵያ ኮንስትራክሽን ፕሮጀክት ማኔጅመንት ኢንስቲትዩት ጋር በመተባበር ለአመራሮችና ለምህንዲስና ባለሙያዎች ባዘጋጀው ስልጠና ላይ ነው፡፡
🚧ስልጠናውን በኔክሰስ ሆቴል የሰጡት የምህንድስና ውል ጉዳዮች የህግ አማካሪና ጠበቃ አቶ ዘውዱ ተፈራ እንደገለፁት በግንባታ ሂደት ውስጥ በአሰሪና በስራ ተቋራጭ መካከል አለመግባባት (Construction Dispute) ሲፈጠር በህግ የተሰጠ ስልጣን ካለ በድርድር፣ በሽምግልና ወይም በስምምነት መፍታት መቻል በፍርድ ቤት ሂደት የሚባክነውን ጊዜና ገንዘብን ያስቀራል፡፡"
#ConstructionDispute
#ConstructionLaw
@etconp
🚧ይህ የተገለፀው የአዲስ አበባ ከተማ መንገዶች ባለስልጣን ከኢትዮጵያ ኮንስትራክሽን ፕሮጀክት ማኔጅመንት ኢንስቲትዩት ጋር በመተባበር ለአመራሮችና ለምህንዲስና ባለሙያዎች ባዘጋጀው ስልጠና ላይ ነው፡፡
🚧ስልጠናውን በኔክሰስ ሆቴል የሰጡት የምህንድስና ውል ጉዳዮች የህግ አማካሪና ጠበቃ አቶ ዘውዱ ተፈራ እንደገለፁት በግንባታ ሂደት ውስጥ በአሰሪና በስራ ተቋራጭ መካከል አለመግባባት (Construction Dispute) ሲፈጠር በህግ የተሰጠ ስልጣን ካለ በድርድር፣ በሽምግልና ወይም በስምምነት መፍታት መቻል በፍርድ ቤት ሂደት የሚባክነውን ጊዜና ገንዘብን ያስቀራል፡፡"
#ConstructionDispute
#ConstructionLaw
@etconp
👉ሰላም ለ ሁላቹም በኮንስትራክሽን ዘርፍ ላይ ያለቹ የሞያ እና የቢዝነስ ማህበራት፣ የኢትዮጵያ ሲቪል መሐንዲሶች ማህበር፣የኢትዮጵያ አርክቴክቶች ማህበር እና ሌሎች በመሆን በጋራ በከተማችን አዲስ አበባ የሚገነቡትን የእንጦጦ ፓርክ፣ሸገር ፓርክ እና አንድነት ፓርክ ለመጎብኘት በእቅድ ላይ እገኛለን።
🚧ስለዚህም መጎብኘት የምትፈልጉ ከታች ባስቀመጥንላቹ ሊንክ ገብታቹ ፎርሙን በመምላት እንድትመዘገብ ተጋብዛቹሃል።👇
https://docs.google.com/forms/d/e/1FAIpQLSeR9Gvj6fAW5rEZFTTJQ_hBw-nKCRizQYccpHqlH7WLr9JyQg/viewform
@etconp
🚧ስለዚህም መጎብኘት የምትፈልጉ ከታች ባስቀመጥንላቹ ሊንክ ገብታቹ ፎርሙን በመምላት እንድትመዘገብ ተጋብዛቹሃል።👇
https://docs.google.com/forms/d/e/1FAIpQLSeR9Gvj6fAW5rEZFTTJQ_hBw-nKCRizQYccpHqlH7WLr9JyQg/viewform
@etconp
👉OFFICE OF THE BUILDING CONSTRUCTION PERFORMER COMMITTEE FOR DEBRE HAWI ST. YARED ANDENET MONASTERY
📌REQUEST FOR EXPRESSIONS OF INTEREST FOR MASTER PLANNING AND ARCHITECTURAL DESIGN PROJECT COMPLETION OF CHURCH AND CENTER FOR RELIGIOUS COMPLEX
1. The Office of the building construction performer committee for Debre Hawi St. Yared Andenet Monastery in collaboration with Association of Ethiopian Architects (AEA) invites all practicing Architects and Consulting Firms to participate in Architectural design competition for Master Planning and Architectural Design Project Competition of Church and Center for Religious Teaching Complex.
2. The Competition is a two-Stage Project Competition open for all Practicing Architects and consulting firms who are the member of AEA, through submittal of Expression of Interest (EOI)
3. Practicing Architects and consulting Firms will be shortlisted for competition’s participation based on their demonstration of response to this request.
4. Interested Practicing Architects and consulting Firms may obtain further information from Secretariat Office of the building construction performer committee for Debre Hawi St. Yared Andenet Monastery and inspect the EOI documents at the address given below at 7(a) from 9:00 A.M - 5:00 P.M (office hour).
5. A complete set of terms of reference (TOR) Documents in English can be purchased by interested Practicing Architects and consulting firms at the address below at 7(a) and upon submitting copies of their License and paying of a non-refundable fee of 500 Ethiopian Birr.
The method of payment will be Cash.
6. Request for EOI with relevant documents must be delivered to the address below at 7(b) at or before
5:30 P.M, September 07, 2020.Late entries are not accepted.
7. (a) Address documents will be issued from: Office of the building construction performer Committee for Debre Hawi St. Yared Andenet Monastery,Arada Sub-City,wereda -09, house no. 811 (Holy Trinty Cathedral Building, 3rd floor, Office No.05. Tel. 0902151111)
7. (b) Address bids will be delivered to: Office of the building construction performer Committee for Debre Hawi St. Yared Andenet Monastery,Arada Sub-City,wereda -09, house no. 811 (Holy Trinty Cathedral Building, 3rd floor, Office No.05, Mob+251902151111
8. Office of the building construction performer committee for Debre Hawi St. Yared Andenet Monastery reserves the right to accept or reject applications made pursuant to this request at its own discretion without assigning any reason thereof.
#Tender
@etconp
📌REQUEST FOR EXPRESSIONS OF INTEREST FOR MASTER PLANNING AND ARCHITECTURAL DESIGN PROJECT COMPLETION OF CHURCH AND CENTER FOR RELIGIOUS COMPLEX
1. The Office of the building construction performer committee for Debre Hawi St. Yared Andenet Monastery in collaboration with Association of Ethiopian Architects (AEA) invites all practicing Architects and Consulting Firms to participate in Architectural design competition for Master Planning and Architectural Design Project Competition of Church and Center for Religious Teaching Complex.
2. The Competition is a two-Stage Project Competition open for all Practicing Architects and consulting firms who are the member of AEA, through submittal of Expression of Interest (EOI)
3. Practicing Architects and consulting Firms will be shortlisted for competition’s participation based on their demonstration of response to this request.
4. Interested Practicing Architects and consulting Firms may obtain further information from Secretariat Office of the building construction performer committee for Debre Hawi St. Yared Andenet Monastery and inspect the EOI documents at the address given below at 7(a) from 9:00 A.M - 5:00 P.M (office hour).
5. A complete set of terms of reference (TOR) Documents in English can be purchased by interested Practicing Architects and consulting firms at the address below at 7(a) and upon submitting copies of their License and paying of a non-refundable fee of 500 Ethiopian Birr.
The method of payment will be Cash.
6. Request for EOI with relevant documents must be delivered to the address below at 7(b) at or before
5:30 P.M, September 07, 2020.Late entries are not accepted.
7. (a) Address documents will be issued from: Office of the building construction performer Committee for Debre Hawi St. Yared Andenet Monastery,Arada Sub-City,wereda -09, house no. 811 (Holy Trinty Cathedral Building, 3rd floor, Office No.05. Tel. 0902151111)
7. (b) Address bids will be delivered to: Office of the building construction performer Committee for Debre Hawi St. Yared Andenet Monastery,Arada Sub-City,wereda -09, house no. 811 (Holy Trinty Cathedral Building, 3rd floor, Office No.05, Mob+251902151111
8. Office of the building construction performer committee for Debre Hawi St. Yared Andenet Monastery reserves the right to accept or reject applications made pursuant to this request at its own discretion without assigning any reason thereof.
#Tender
@etconp
❤1
👉በህንድ ከባድ የህንጻ መደርመስ አደጋ ተከሰተ‼️
🚧አደጋዉ ትናንትና ከሰዓት የደረሰ ሲሆን በህንድ የፋይናንስ ከተማ ከሆነችዉ ሙምባይ አቅራቢያ ያጋጠመ ነዉ፡፡
🚧የተደረመሰዉ ህንጻ ባለ አምስት ወለል ሲሆን ማሃዳ በተባለዉ አዉራጃ ይገኛል፡፡
🚧በህንጻዉ ዉስጥ 200 ያህል ሰዎች እንደነበሩም ተነግሯል እስካሁን በተረጋገጠ መረጃ አንድ ግለሰብ ህይወቱ ሲያልፍ 30 ሰዎች ክፉኛ ቆስለዋል፡፡
🚧አደጋዉ እንዴት ሊያጋጥም እንደቻለ ማብራሪያ ባይሰጠውም በህንድ በተደጋጋሚ የህንጻ መደርመስ አደጋ እንደሚያጋጥም መረጃዎች ያመላክታሉ፡፡
🚧በ 2017 ዓመት ምህረት ብቻ ብሄራዊ የወንጀል ቢሮ ባወጣዉ መረጃ መሰረት በህንድ 1,161 ህንጻዎች ተደርምሰዉ ከ1200 በላይ ሰዎችን ህይወት ነጥቋል፡፡
🚧ይህንኑ መሰል አደጋ በህንድ ዝናባማ ወቅት በሆነዉ ከሰኔ እስከ መስከረም ባሉት ወራት ያጋጥማል በተያዘዉ ዓመት ዝናብ ካስከተለዉ የጎርፍና የመሬት መንሸራተት አደጋ በህንድ ከ800 በላይ ሰዎች ህይወታቸዉን አጥተዋል፡፡
Via Dawit D
#FirstSafety
@etconp
🚧አደጋዉ ትናንትና ከሰዓት የደረሰ ሲሆን በህንድ የፋይናንስ ከተማ ከሆነችዉ ሙምባይ አቅራቢያ ያጋጠመ ነዉ፡፡
🚧የተደረመሰዉ ህንጻ ባለ አምስት ወለል ሲሆን ማሃዳ በተባለዉ አዉራጃ ይገኛል፡፡
🚧በህንጻዉ ዉስጥ 200 ያህል ሰዎች እንደነበሩም ተነግሯል እስካሁን በተረጋገጠ መረጃ አንድ ግለሰብ ህይወቱ ሲያልፍ 30 ሰዎች ክፉኛ ቆስለዋል፡፡
🚧አደጋዉ እንዴት ሊያጋጥም እንደቻለ ማብራሪያ ባይሰጠውም በህንድ በተደጋጋሚ የህንጻ መደርመስ አደጋ እንደሚያጋጥም መረጃዎች ያመላክታሉ፡፡
🚧በ 2017 ዓመት ምህረት ብቻ ብሄራዊ የወንጀል ቢሮ ባወጣዉ መረጃ መሰረት በህንድ 1,161 ህንጻዎች ተደርምሰዉ ከ1200 በላይ ሰዎችን ህይወት ነጥቋል፡፡
🚧ይህንኑ መሰል አደጋ በህንድ ዝናባማ ወቅት በሆነዉ ከሰኔ እስከ መስከረም ባሉት ወራት ያጋጥማል በተያዘዉ ዓመት ዝናብ ካስከተለዉ የጎርፍና የመሬት መንሸራተት አደጋ በህንድ ከ800 በላይ ሰዎች ህይወታቸዉን አጥተዋል፡፡
Via Dawit D
#FirstSafety
@etconp
👍1
👉Rahel Shawl, the Ethiopian Star Architect gave an interview to the daily "Addis Zemen" Enjoy it.
➡️‹‹ሕንፃዎችን ለመቶ ዓመት እንጂ ለአስርና ሃያ ዓመት ብለህ አትገነባም››- አርክቴክት ራሔል ሻውል አርክቴክት ራሔል ሻውል የተወለዱትና ያደጉት አዲስ አበባ ፒያሳ ነው። የአራዳ ልጅ ናቸው። ይሄ ትርጉም አለው ከሕብረተሰቡ ጋር ተግባብተህ ብዙ ነገር አውቀህ ታድጋለህ ከሕይወቴ አንዱ የምወደው አስተዳደጌን ነው ይላሉ በንጉሡ ጊዜ የፖሊስ ኮሚሽነር የነበሩት የጀነራል ሻውል ዘለቀ ልጅ ናቸው ደርግ አባታቸውን 8 ዓመት በእስር ቤት አቆይቷቸዋል አባታቸው በመታሰራቸው ምክንያት አምስቱንም ልጆች ያሳደጉት እናታቸው ናቸው የመጀመሪያና የሁለተኛ ደረጃ ትምህርታቸውን በአዲስ አበባ ናዝሬት ስኩል ነው የተከታተሉት አዲስ አበባ ዩኒቨርሲቲ ሕንፃ ኮሌጅ በመግባት በአርክቴክቸርና የከተማ ፕላኒንግ (አርበን ፕላኒንግ) ተመርቀዋል። በአርክቴክትነት( ኪነ ሕንፃ) የሥራ ዓለም ብዙ አሳልፈዋል የተለያዩ ዓለም አቀፍ አዋርዶች (ሽልማቶች) ተሸላሚም ናቸው በአርክቴክት ሙያ ለዓለም አቀፍ ሽልማት ሲቀርቡ አፍሪካን ወክለው የተመረጡ ሀገርን ያኮሩ ባለሙያ ናቸው።
ድሮ ኢትዮጵያ ብዙ ሴት አርክቴክቶች አልነበሯትም ትምህርት ላይ አዲስ አበባ ዩኒቨርሲቲ በነበሩበት ጊዜ ከ20 ወንዶች የአርክቴክት ተማሪዎች ሴት እሳቸው ብቻ ነበሩ ዛሬ ግን ብዙ የሴት አርክቴክቶች አሉን። በሀገራችን ስማቸው ጎልቶ የሚነሳ ታዋቂና ቀደምት የሴት አርክቴክት ናቸው በኢትዮጵያ አርክቴክት (ስነሕንፃ)፤ በሠሯቸው ሥራዎችና በዚህ ሙያ ያለውን የሴቶች ተሳትፎ፤ ከሙያው ጋር በተያያዘ ስላሉት ችግሮችና መፍትሔዎች ከአዲስ ዘመን ጋር ያደረጉትን ቆይታ ለዛሬ ይዘን ቀርበናል።
አዲስ ዘመን፡- አዲስ አበባ ዩኒቨርሲቲ ከተመረቁ በኋላ የመጀመሪያ ሥራዎትን የት ጀመሩ?
አርክቴክት ራሔል፡- የመጀመሪያ ሥራዬን ኢንተርናሽናል ኢቫንጀሊካል ቸርች ኤንድ ቲዎሎጂ ኮሌጅ የሚባል የመጀመሪያ ፕሮጀክት ቢሮ ነበረ ወደአፍሪካ ሕብረት ሳር ቤት አካባቢ ያለ ነው ለሁለት ዓመት ተኩል እዚያ ነው የሠራሁት።
አዲስ ዘመን፡- ምን ምን ሥራዎችን ሠራችሁ ?
አርክቴክት ራሔል፡- ኮንሰፕት ዲዛይኑን (መነሻ ንድፉን) የቤተክርስትያኑንና ኮሌጁን የሠራው አዲስ አበባ ዩኒቨርሲቲ እያለን አስተማሪያችን ነበር ዲዛይን ዴቨሎፕመንት የሚባል አለ ድሮዊንጎችን እዚያው ደግሞ ፕሮጀክት ቢሮ ስለሆነ ዲዛይኑ እየተሠራ ግንባታውን ትቆጣጠራለህ ማለት ነው ሁለት ዓመት ተኩል እዚያ ላይ ስለ ሠራሁ ራሱን ያቻለ ትልቅ ትምህርት ሆነኝ በእኛ ጊዜ ትልቅ ፕሮጀክት ስለሆነ ዲዛይኑ በአዲስ አበባ ስታይል አርክቴክቸር በሚባል ነው የተሠራው የሕንፃው ዝርዝሩ፤ ውስጡ፤ ውጪው መሬቱን ዙሪያ አቀማመጡን አጥሩን ግንባታውን ሁሉንም ዲዛይን ሦስት ሆነን ነው የሠራነው አርክቴክቱ ማልከም ማግሬገር ይባላል ስኮትሽ ነው ቤተክርስትያኑ ቀጥሮን ከእሱ ጋር ነው የሠራ ነው ለእኔ ቀጥታ ከትምህርት ቤት ወጥቼ እዚያ መሥራቴ ትልቅ ዕድል ነበር ሙሉ በሙሉ ከዲዛይንና ኮንስትራክሽን ዝርዝር ከእዚያም ሱፕርቪዥን (ቁጥጥር) የሚለውን ነገር በጣም ነው የተማርኩበት።
አዲስ ዘመን፡- ቀጥለው በአርክቴክትነት የት ሠሩ ?
አርክቴክት ራሔል፡- ከዚህ ሥራ በኋላ የራሳችንን ቢሮ ከፈትን።
አዲስ ዘመን፤- ድርጅቱ ማን ይባላል ?
አርክቴክት ራሔል፡- ሦስት ሆነን ነበር የጀመርነው ከመጀመሪያው በኋላ ከመቀጠር ለምን የራሳችንን ሥራ አንሠራም ብለን ወሰንን እኔ ፣ ዮሴፍ በረደድና ሊያ ኤፍሬም ነበርን ትንሽ ቢሮ ይዘን ቪላዎች፤ ኤክስፓንሽኖች (ማስፋፋቶች)፤በዚህ ሥራዎችን ጀመርን የድርጅቱ ስም አባ አርክቴክት ይባላል 8 ዓመት ሠራን በ2014 (እኤአ) መስከረም ላይ ተለያየን ከዚያም የራሴን ቢሮ ራስ አርክቴክት በሚል ከፈትኩ ቢሮው ከተከፈተ መጪው መስከረም 16 ዓመት ይሆነዋል።
አዲስ ዘመን፡- ራስ አርክቴክት መጀመሪያ የት ሠራ?
አርክቴክት ራሔል፡- ከትንሹ ጀምረን 8 ዓመት አብረን ስንሠራ ብዙ ትላልቅ ፕሮጀክቶች እየሠራን መጣን መጨረሻ ሽግግሩ ላይ ኔዘርላንድስ የሚባለው ፕሮጀክት ትልቅ ሥራ ስለነበር እኔ በኢትዮጵያ በኩል የፕሮጀክቱ ሊድ አርክቴክት(መሪ አርክቴክት) ነበርኩ ዳቾች ናቸው ዲዛይኑን የሠሩት በትብብር ነው የተሠራው።
አርክቴክቶች ገና ከውጭ ሲመጡ አባ አርክቴክት ሆኜ እተዋወቃቸዋለሁ ከዚያ በፊት ትላልቅ ፊስቱላ ሆስፒታሎችን በሙሉ እኛ ነን የሠራነው አዲስ አበባ አጉስታ ጋ ያለውን እሱ ፕሮጀክት ላይ ብዙ ዓመት ከዮሴፍ በረደድ ጋር አባ አርክቴክት ሆንን አብረን ሠርተናል ሦስተኛዋ ሊያ ኤፍሬም ሁለት ዓመት ብቻ ሠርታ አሜሪካ ገባች እኔና ዮሴፍ ነን የቀጠልነው።
በሕይወትህ ውስጥ የማእዘን ድንጋይ ተደርገው የሚወሰዱ ለውጦች ዕርምጃዎች አሉ በሙያህ የምታድግበት የመጀመሪያ የሠራነው ቤተክርስትያኑን ነው ከዚያ ፊስቱላ ሆስፒታሎቹን ሆስፒታሉ ፈንድ እየሰበሰበ ስለሆነ የምንሠራው እኛም በሙያው ብዙ አድገንብታል በክፍል በክፍል እየተደረገ ነው የተሠራው መካነ እየሱስ፤ቢንግሀም አካዳሚ ብዙ ሥራዎች ሠርተናል ከዮሴፍ በረደድ ጋር ከተለያየን በኋላ እኔም አንድ ሁለት ፕሮጀክቶች (አውት ሪቾች) ሀረር፤ መቀሌ ይሠራ ነበር እኔ ብቻዬን የሠራሁት መቱ ላይ ያለውን ነው ስንለያይ ቢሮ ስላለ እሱ ቀጠለ።
አዲስ ዘመን፡- ራስ አርክቴክት የሠራቸውን ሥራዎች ቢገልጹልን ?
አርክቴክት ራሔል፡- ራስ አርክቴክትን ከ16 ዓመት በፊት ስከፍት ምንድነው የሆነው ኔዘርላንድ ኤምባሲ የነበረውን ሥራ እኔ ነበርኩ የምመራው አብረህ ስትሠራ ፕሮጀክት እየተከፋፈልክ ስለሆነ እኔ እሱን ነበር የምቆጣጠረው ፕሮጀክቱ የአምስት ስድስት ዓመት ነበር ከዲዛይን ጀምሮ መሰረት ሲወጣ ግንባታ ሲጀመር ሁለት ዓመት ፈጀ በእኔ ሱፐር ቪዥን 2004 ላይ ግንባታው ተጠናቋል።
ከዚያ ወደ ራስ አርክቴክት ስገባ የሚቀሩ ሥራዎች ነበሩ ያው ፕሮጀክት አያልቅም እኔ ስወጣ ትንንሽ ሥራዎች ተሠርተው ተመርቀዋል እሱን ይዤ ነው ቤቴ እሠራ የነበረው በዚህ ሰዓት ላይ ሁለት ልጆች ወልጃለሁ ወጣ ገባ እያልኩ ነው የሠራሁት እንደ ሴትም ብትወስደው በጣም ትልቅ ፕሮጀክት ነው የመጀመሪያ ሥራ ራስ አርክቴክትን እንደጀመርኩ ትንሿ ልጄ ተወለደች በእጄ ላይ አንዳንድ ሥራዎች ስለነበሩ ቀጣይነትም ስለነበረው የግዴታ ላይሰንስ (የሥራ ፈቃድ) አስፈለገኝ፤ አወጣሁ በዚያ ነው የራሴ ድርጅት ራስ አርክቴክት የተጀመረው በራስ አርክቴክት ድርጅት ውስጥ የሠራነው ትልቁ ፕሮጀከት የደቡብ አፍሪካ ኤምባሲ ነው።
አዲስ ዘመን፡- የኤምባሲውን ሕንፃ ዲዛይን አርስዎ ነዎት የሠሩት?
አርክቴክት ራሔል፡- ደቡብ አፍሪካ ኤምባሲን ከሠራሁ በኋላ ብዙ ኤምባሲዎችን ሠርቼአለሁ የኤምባሲው ሥራ የኮላበሬሽን ሥራ ነው ኤምባሲው የግንባታ ሥራ ሲያስብ የሀገራቸው አርክቴክቶች መጥተው የሀገር ውስጥ አርክቴክቶችን ያወዳድራሉ ኔዘርላንድ ኤምባሲ ላይ ጥሩ የሥራ ውጤት ስለነበረኝ ወዲያውኑ ሰጡኝ።
ደቡብ አፍሪካዊ አርክቴክት ነበር ከእሱ ጋር ሆኜ ከዲዛይን ዴቨሎፕመንት ጀምሬ እየተመላለስኩ ሠራሁ እነሱም እየመጡ እዚህ ያለውን ዲዛይን ወደ አስር ኢንጂነሮች ነበሩ አብረን ሠራን በእነሱና በእኛ ግንባታው ሁለት ዓመት ፈጅቶ ተጠናቀቀ።
@etconp
➡️‹‹ሕንፃዎችን ለመቶ ዓመት እንጂ ለአስርና ሃያ ዓመት ብለህ አትገነባም››- አርክቴክት ራሔል ሻውል አርክቴክት ራሔል ሻውል የተወለዱትና ያደጉት አዲስ አበባ ፒያሳ ነው። የአራዳ ልጅ ናቸው። ይሄ ትርጉም አለው ከሕብረተሰቡ ጋር ተግባብተህ ብዙ ነገር አውቀህ ታድጋለህ ከሕይወቴ አንዱ የምወደው አስተዳደጌን ነው ይላሉ በንጉሡ ጊዜ የፖሊስ ኮሚሽነር የነበሩት የጀነራል ሻውል ዘለቀ ልጅ ናቸው ደርግ አባታቸውን 8 ዓመት በእስር ቤት አቆይቷቸዋል አባታቸው በመታሰራቸው ምክንያት አምስቱንም ልጆች ያሳደጉት እናታቸው ናቸው የመጀመሪያና የሁለተኛ ደረጃ ትምህርታቸውን በአዲስ አበባ ናዝሬት ስኩል ነው የተከታተሉት አዲስ አበባ ዩኒቨርሲቲ ሕንፃ ኮሌጅ በመግባት በአርክቴክቸርና የከተማ ፕላኒንግ (አርበን ፕላኒንግ) ተመርቀዋል። በአርክቴክትነት( ኪነ ሕንፃ) የሥራ ዓለም ብዙ አሳልፈዋል የተለያዩ ዓለም አቀፍ አዋርዶች (ሽልማቶች) ተሸላሚም ናቸው በአርክቴክት ሙያ ለዓለም አቀፍ ሽልማት ሲቀርቡ አፍሪካን ወክለው የተመረጡ ሀገርን ያኮሩ ባለሙያ ናቸው።
ድሮ ኢትዮጵያ ብዙ ሴት አርክቴክቶች አልነበሯትም ትምህርት ላይ አዲስ አበባ ዩኒቨርሲቲ በነበሩበት ጊዜ ከ20 ወንዶች የአርክቴክት ተማሪዎች ሴት እሳቸው ብቻ ነበሩ ዛሬ ግን ብዙ የሴት አርክቴክቶች አሉን። በሀገራችን ስማቸው ጎልቶ የሚነሳ ታዋቂና ቀደምት የሴት አርክቴክት ናቸው በኢትዮጵያ አርክቴክት (ስነሕንፃ)፤ በሠሯቸው ሥራዎችና በዚህ ሙያ ያለውን የሴቶች ተሳትፎ፤ ከሙያው ጋር በተያያዘ ስላሉት ችግሮችና መፍትሔዎች ከአዲስ ዘመን ጋር ያደረጉትን ቆይታ ለዛሬ ይዘን ቀርበናል።
አዲስ ዘመን፡- አዲስ አበባ ዩኒቨርሲቲ ከተመረቁ በኋላ የመጀመሪያ ሥራዎትን የት ጀመሩ?
አርክቴክት ራሔል፡- የመጀመሪያ ሥራዬን ኢንተርናሽናል ኢቫንጀሊካል ቸርች ኤንድ ቲዎሎጂ ኮሌጅ የሚባል የመጀመሪያ ፕሮጀክት ቢሮ ነበረ ወደአፍሪካ ሕብረት ሳር ቤት አካባቢ ያለ ነው ለሁለት ዓመት ተኩል እዚያ ነው የሠራሁት።
አዲስ ዘመን፡- ምን ምን ሥራዎችን ሠራችሁ ?
አርክቴክት ራሔል፡- ኮንሰፕት ዲዛይኑን (መነሻ ንድፉን) የቤተክርስትያኑንና ኮሌጁን የሠራው አዲስ አበባ ዩኒቨርሲቲ እያለን አስተማሪያችን ነበር ዲዛይን ዴቨሎፕመንት የሚባል አለ ድሮዊንጎችን እዚያው ደግሞ ፕሮጀክት ቢሮ ስለሆነ ዲዛይኑ እየተሠራ ግንባታውን ትቆጣጠራለህ ማለት ነው ሁለት ዓመት ተኩል እዚያ ላይ ስለ ሠራሁ ራሱን ያቻለ ትልቅ ትምህርት ሆነኝ በእኛ ጊዜ ትልቅ ፕሮጀክት ስለሆነ ዲዛይኑ በአዲስ አበባ ስታይል አርክቴክቸር በሚባል ነው የተሠራው የሕንፃው ዝርዝሩ፤ ውስጡ፤ ውጪው መሬቱን ዙሪያ አቀማመጡን አጥሩን ግንባታውን ሁሉንም ዲዛይን ሦስት ሆነን ነው የሠራነው አርክቴክቱ ማልከም ማግሬገር ይባላል ስኮትሽ ነው ቤተክርስትያኑ ቀጥሮን ከእሱ ጋር ነው የሠራ ነው ለእኔ ቀጥታ ከትምህርት ቤት ወጥቼ እዚያ መሥራቴ ትልቅ ዕድል ነበር ሙሉ በሙሉ ከዲዛይንና ኮንስትራክሽን ዝርዝር ከእዚያም ሱፕርቪዥን (ቁጥጥር) የሚለውን ነገር በጣም ነው የተማርኩበት።
አዲስ ዘመን፡- ቀጥለው በአርክቴክትነት የት ሠሩ ?
አርክቴክት ራሔል፡- ከዚህ ሥራ በኋላ የራሳችንን ቢሮ ከፈትን።
አዲስ ዘመን፤- ድርጅቱ ማን ይባላል ?
አርክቴክት ራሔል፡- ሦስት ሆነን ነበር የጀመርነው ከመጀመሪያው በኋላ ከመቀጠር ለምን የራሳችንን ሥራ አንሠራም ብለን ወሰንን እኔ ፣ ዮሴፍ በረደድና ሊያ ኤፍሬም ነበርን ትንሽ ቢሮ ይዘን ቪላዎች፤ ኤክስፓንሽኖች (ማስፋፋቶች)፤በዚህ ሥራዎችን ጀመርን የድርጅቱ ስም አባ አርክቴክት ይባላል 8 ዓመት ሠራን በ2014 (እኤአ) መስከረም ላይ ተለያየን ከዚያም የራሴን ቢሮ ራስ አርክቴክት በሚል ከፈትኩ ቢሮው ከተከፈተ መጪው መስከረም 16 ዓመት ይሆነዋል።
አዲስ ዘመን፡- ራስ አርክቴክት መጀመሪያ የት ሠራ?
አርክቴክት ራሔል፡- ከትንሹ ጀምረን 8 ዓመት አብረን ስንሠራ ብዙ ትላልቅ ፕሮጀክቶች እየሠራን መጣን መጨረሻ ሽግግሩ ላይ ኔዘርላንድስ የሚባለው ፕሮጀክት ትልቅ ሥራ ስለነበር እኔ በኢትዮጵያ በኩል የፕሮጀክቱ ሊድ አርክቴክት(መሪ አርክቴክት) ነበርኩ ዳቾች ናቸው ዲዛይኑን የሠሩት በትብብር ነው የተሠራው።
አርክቴክቶች ገና ከውጭ ሲመጡ አባ አርክቴክት ሆኜ እተዋወቃቸዋለሁ ከዚያ በፊት ትላልቅ ፊስቱላ ሆስፒታሎችን በሙሉ እኛ ነን የሠራነው አዲስ አበባ አጉስታ ጋ ያለውን እሱ ፕሮጀክት ላይ ብዙ ዓመት ከዮሴፍ በረደድ ጋር አባ አርክቴክት ሆንን አብረን ሠርተናል ሦስተኛዋ ሊያ ኤፍሬም ሁለት ዓመት ብቻ ሠርታ አሜሪካ ገባች እኔና ዮሴፍ ነን የቀጠልነው።
በሕይወትህ ውስጥ የማእዘን ድንጋይ ተደርገው የሚወሰዱ ለውጦች ዕርምጃዎች አሉ በሙያህ የምታድግበት የመጀመሪያ የሠራነው ቤተክርስትያኑን ነው ከዚያ ፊስቱላ ሆስፒታሎቹን ሆስፒታሉ ፈንድ እየሰበሰበ ስለሆነ የምንሠራው እኛም በሙያው ብዙ አድገንብታል በክፍል በክፍል እየተደረገ ነው የተሠራው መካነ እየሱስ፤ቢንግሀም አካዳሚ ብዙ ሥራዎች ሠርተናል ከዮሴፍ በረደድ ጋር ከተለያየን በኋላ እኔም አንድ ሁለት ፕሮጀክቶች (አውት ሪቾች) ሀረር፤ መቀሌ ይሠራ ነበር እኔ ብቻዬን የሠራሁት መቱ ላይ ያለውን ነው ስንለያይ ቢሮ ስላለ እሱ ቀጠለ።
አዲስ ዘመን፡- ራስ አርክቴክት የሠራቸውን ሥራዎች ቢገልጹልን ?
አርክቴክት ራሔል፡- ራስ አርክቴክትን ከ16 ዓመት በፊት ስከፍት ምንድነው የሆነው ኔዘርላንድ ኤምባሲ የነበረውን ሥራ እኔ ነበርኩ የምመራው አብረህ ስትሠራ ፕሮጀክት እየተከፋፈልክ ስለሆነ እኔ እሱን ነበር የምቆጣጠረው ፕሮጀክቱ የአምስት ስድስት ዓመት ነበር ከዲዛይን ጀምሮ መሰረት ሲወጣ ግንባታ ሲጀመር ሁለት ዓመት ፈጀ በእኔ ሱፐር ቪዥን 2004 ላይ ግንባታው ተጠናቋል።
ከዚያ ወደ ራስ አርክቴክት ስገባ የሚቀሩ ሥራዎች ነበሩ ያው ፕሮጀክት አያልቅም እኔ ስወጣ ትንንሽ ሥራዎች ተሠርተው ተመርቀዋል እሱን ይዤ ነው ቤቴ እሠራ የነበረው በዚህ ሰዓት ላይ ሁለት ልጆች ወልጃለሁ ወጣ ገባ እያልኩ ነው የሠራሁት እንደ ሴትም ብትወስደው በጣም ትልቅ ፕሮጀክት ነው የመጀመሪያ ሥራ ራስ አርክቴክትን እንደጀመርኩ ትንሿ ልጄ ተወለደች በእጄ ላይ አንዳንድ ሥራዎች ስለነበሩ ቀጣይነትም ስለነበረው የግዴታ ላይሰንስ (የሥራ ፈቃድ) አስፈለገኝ፤ አወጣሁ በዚያ ነው የራሴ ድርጅት ራስ አርክቴክት የተጀመረው በራስ አርክቴክት ድርጅት ውስጥ የሠራነው ትልቁ ፕሮጀከት የደቡብ አፍሪካ ኤምባሲ ነው።
አዲስ ዘመን፡- የኤምባሲውን ሕንፃ ዲዛይን አርስዎ ነዎት የሠሩት?
አርክቴክት ራሔል፡- ደቡብ አፍሪካ ኤምባሲን ከሠራሁ በኋላ ብዙ ኤምባሲዎችን ሠርቼአለሁ የኤምባሲው ሥራ የኮላበሬሽን ሥራ ነው ኤምባሲው የግንባታ ሥራ ሲያስብ የሀገራቸው አርክቴክቶች መጥተው የሀገር ውስጥ አርክቴክቶችን ያወዳድራሉ ኔዘርላንድ ኤምባሲ ላይ ጥሩ የሥራ ውጤት ስለነበረኝ ወዲያውኑ ሰጡኝ።
ደቡብ አፍሪካዊ አርክቴክት ነበር ከእሱ ጋር ሆኜ ከዲዛይን ዴቨሎፕመንት ጀምሬ እየተመላለስኩ ሠራሁ እነሱም እየመጡ እዚህ ያለውን ዲዛይን ወደ አስር ኢንጂነሮች ነበሩ አብረን ሠራን በእነሱና በእኛ ግንባታው ሁለት ዓመት ፈጅቶ ተጠናቀቀ።
@etconp
What’s tele-handler used for ?
1️⃣. To install CCTV on construction site
2️⃣. Vertical and horizontal transport of
materials
3️⃣. For lifting personnel to elevated
work sites
4️⃣. To scoop- up materials and deposit
them in a vehicle
@etconp
1️⃣. To install CCTV on construction site
2️⃣. Vertical and horizontal transport of
materials
3️⃣. For lifting personnel to elevated
work sites
4️⃣. To scoop- up materials and deposit
them in a vehicle
@etconp
Ethio Construction Engineering via @like
What’s tele-handler used for ? 1️⃣. To install CCTV on construction site 2️⃣. Vertical and horizontal transport of materials 3️⃣. For lifting personnel to elevated work sites 4️⃣. To scoop- up materials and deposit them in…
👉በመላ ሀገሪቱ የሚስተዋለው የሲሚንቶ እጥረት ከፍተኛ ቁጥር ያለውን የሰው ኃይል የተሸከመሙ የግንባታ ፕሮጀክቶችን እና የሥራ ተቋራጮችን ለከፍተኛ ኪሳራ የዳረገ ሲሆን ከፍተኛ ሀገራዊ ዋጋ ያላቸው ፕሮጀክቶች እንዲጓተቱ ምክንያት ህኖ ቆይቷል።
🚧ይህንን ችግር ለመፍታት የዶላር አካውንት ያላቸው አስመጪዎች ሲሚንቶ ከቀረጥ ነጻ እንዲያስገቡ መፈቀዱን የንግድና ኢንዱስትሪ ሚኒስትር መላኩ አለበል ትላንት ነሀሴ 19/2012 በሠጡት ጋዜጣዊ መግለጫ አስታውቀዋል።
@etconp
🚧ይህንን ችግር ለመፍታት የዶላር አካውንት ያላቸው አስመጪዎች ሲሚንቶ ከቀረጥ ነጻ እንዲያስገቡ መፈቀዱን የንግድና ኢንዱስትሪ ሚኒስትር መላኩ አለበል ትላንት ነሀሴ 19/2012 በሠጡት ጋዜጣዊ መግለጫ አስታውቀዋል።
@etconp
👉What is Honey combing in concrete?
🚧Honeycombing is the term used to describe areas of the surface that are coarse and stony.
🚧It may be caused by insufficient fine material in the mix, perhaps due to incorrect aggregate grading or poor mixing, Small, shallow areas of honey combing are probably mainly cosmetic.
➡️WHAT CAUSES HONEYCOMBING?
🚧Honeycombing is caused either by the compaction not having been adequate to cause the mortar to fill the voids between the coarse aggregate, or by holes and gaps in the formwork allowing some of the mortar to drain out of the concrete.
➡️How do we fix honeycomb in concrete and Remedies for Honey combs in Concrete
🚧Strictly speaking wherever honeycombs are observed in concrete, the affected area should be broken and the portion should be re-concreted after applying grouting chemical to the old surface.
#ConcreteTechnology
@etconp
🚧Honeycombing is the term used to describe areas of the surface that are coarse and stony.
🚧It may be caused by insufficient fine material in the mix, perhaps due to incorrect aggregate grading or poor mixing, Small, shallow areas of honey combing are probably mainly cosmetic.
➡️WHAT CAUSES HONEYCOMBING?
🚧Honeycombing is caused either by the compaction not having been adequate to cause the mortar to fill the voids between the coarse aggregate, or by holes and gaps in the formwork allowing some of the mortar to drain out of the concrete.
➡️How do we fix honeycomb in concrete and Remedies for Honey combs in Concrete
🚧Strictly speaking wherever honeycombs are observed in concrete, the affected area should be broken and the portion should be re-concreted after applying grouting chemical to the old surface.
#ConcreteTechnology
@etconp
👍1
DIGITALIZATION IN THE CONSTRUCTION INDUSTRY HAS BEEN A GROWING TREND FOR MANY YEARS: HOWEVER, NOW ITS SPEED IS ACCELERATING
The Construction Industry is reshaping itself, albeit slowly but certainly faster than previously. Pressure for change is coming from several complementary directions:
Evolving client expectations
Clients, influenced by other rapidly changing markets, now expect also the same from their homes, offices, commercial buildings and infrastructures to make their “connected lives” even more a reality. Constructions need to be more and more individualized, modular, connected to the Internet of Things (IoT) and allow for specific performance tracking, optimization of energy and improved security and health parameters for instance. Client demands are quickly rising and become more and more complex with expectations increasingly on the “usage” more than on the product itself.
New technological capabilities
Sensors and various hardware as well as software have seen cost drop and efficiency rise over the past few years opening the path to new possibilities. Technologies available on the market are more numerous than ever before (such as virtual and augmented reality, drones, robotics and additive printing) making it urgent to separate the more valuable ones from mere novelties.
New generation of craftsmen and professionals
Tech savviness is spreading in the construction industry, which traditionally has been, resistant to change, accelerating the adoption of digital tools. Innovative university curricula are training the younger generations for emerging tech-related jobs. Many new jobs, not yet known, will be created in the years to come with the adoption of new tools and processes.
Booming start-up environment
Start-ups have taken advantage of the market opportunities induced by some of these trends to fill newly created added-value gaps. Oliver Wyman has identified nearly 1,200 startups worldwide since 2010 in real estate and construction. These startups have received around US$19.4 billion in funding over the period, half of it in 2017.
Supportive legal frameworks
Governments, particularly in the Nordic countries and the UK, are increasing their CO2 and energy efficiency regulations and raising their targets. Digitalization provides a great opportunity to reduce the environmental impact of construction projects. There will also be heightened requirements on data usage and cyber security in buildings and infrastructures going forward that will need to be carefully analyzed (General Data Protection Regulation). Importantly, labels and groups are also more and more launched to help the market move in one common direction and support innovation.
Launch of large infrastructure projects
Market needs are tremendous in terms of new infrastructure networks between cities (such as the Grand Paris Express with 200km of new automated metro lines in France, the High Speed 2 (HS2) in the UK or the Rastatt tunnel in Germany) as well as in terms of upgrading partly old existing structures.
All players in the industry, whether they are promoters, engineering companies, builders, suppliers of equipment, materials, or distributors will be impacted by digital pressures. Each one will experience this differently, of course, but there is no doubt that significant change is coming. The outlined trends put pressure on incumbents (both equipment and traditional construction and service players) by producing a more complex and dynamic competitive landscape and the progressive disruption of traditional channels in the battle for customer access and control.
Click on the link below to read more. https://www.mmc.com/content/dam/mmc-web/Files/OliverWyman_Digitalization_in_the_construction_industry_web_final.pdf
#DigitalTransformation
#BIM
@etconp
The Construction Industry is reshaping itself, albeit slowly but certainly faster than previously. Pressure for change is coming from several complementary directions:
Evolving client expectations
Clients, influenced by other rapidly changing markets, now expect also the same from their homes, offices, commercial buildings and infrastructures to make their “connected lives” even more a reality. Constructions need to be more and more individualized, modular, connected to the Internet of Things (IoT) and allow for specific performance tracking, optimization of energy and improved security and health parameters for instance. Client demands are quickly rising and become more and more complex with expectations increasingly on the “usage” more than on the product itself.
New technological capabilities
Sensors and various hardware as well as software have seen cost drop and efficiency rise over the past few years opening the path to new possibilities. Technologies available on the market are more numerous than ever before (such as virtual and augmented reality, drones, robotics and additive printing) making it urgent to separate the more valuable ones from mere novelties.
New generation of craftsmen and professionals
Tech savviness is spreading in the construction industry, which traditionally has been, resistant to change, accelerating the adoption of digital tools. Innovative university curricula are training the younger generations for emerging tech-related jobs. Many new jobs, not yet known, will be created in the years to come with the adoption of new tools and processes.
Booming start-up environment
Start-ups have taken advantage of the market opportunities induced by some of these trends to fill newly created added-value gaps. Oliver Wyman has identified nearly 1,200 startups worldwide since 2010 in real estate and construction. These startups have received around US$19.4 billion in funding over the period, half of it in 2017.
Supportive legal frameworks
Governments, particularly in the Nordic countries and the UK, are increasing their CO2 and energy efficiency regulations and raising their targets. Digitalization provides a great opportunity to reduce the environmental impact of construction projects. There will also be heightened requirements on data usage and cyber security in buildings and infrastructures going forward that will need to be carefully analyzed (General Data Protection Regulation). Importantly, labels and groups are also more and more launched to help the market move in one common direction and support innovation.
Launch of large infrastructure projects
Market needs are tremendous in terms of new infrastructure networks between cities (such as the Grand Paris Express with 200km of new automated metro lines in France, the High Speed 2 (HS2) in the UK or the Rastatt tunnel in Germany) as well as in terms of upgrading partly old existing structures.
All players in the industry, whether they are promoters, engineering companies, builders, suppliers of equipment, materials, or distributors will be impacted by digital pressures. Each one will experience this differently, of course, but there is no doubt that significant change is coming. The outlined trends put pressure on incumbents (both equipment and traditional construction and service players) by producing a more complex and dynamic competitive landscape and the progressive disruption of traditional channels in the battle for customer access and control.
Click on the link below to read more. https://www.mmc.com/content/dam/mmc-web/Files/OliverWyman_Digitalization_in_the_construction_industry_web_final.pdf
#DigitalTransformation
#BIM
@etconp
👍1
👉Types of Columns in Building Construction
Columns are classified based on the several conditions which include:
▶️Based on Types of Reinforcement
▶️Based on Types of Loading
▶️Based on Slenderness Ratio
▶️Based on Shape
▶️Based on Construction Material
▶️Based on Types of Reinforcement
🔖We'll post 14 different types of columns in the following posts.👇
#TypesofColumn
@etconp
Columns are classified based on the several conditions which include:
▶️Based on Types of Reinforcement
▶️Based on Types of Loading
▶️Based on Slenderness Ratio
▶️Based on Shape
▶️Based on Construction Material
▶️Based on Types of Reinforcement
🔖We'll post 14 different types of columns in the following posts.👇
#TypesofColumn
@etconp
❤1
1. Tied Column
▶️This type of column is commonly construction from reinforced concrete. Longitudinal reinforcement are confined within closely spaced tie reinforcement.
⏺It is estimated that 95% of all columns in buildings are tied.
#TypesofColumn
@etconp
▶️This type of column is commonly construction from reinforced concrete. Longitudinal reinforcement are confined within closely spaced tie reinforcement.
⏺It is estimated that 95% of all columns in buildings are tied.
#TypesofColumn
@etconp
2. Spiral Column
➡️Spiral column is also construction from reinforced concrete.
▶️In this type of column, longitudinal bars are confined within closely spaced and continuously wound spiral reinforcement.
➡️Spiral reinforcement provide lateral restrains (Poisson’s effect) and delays axial load failure (ductile).
#TypesofColumn
@etconp
➡️Spiral column is also construction from reinforced concrete.
▶️In this type of column, longitudinal bars are confined within closely spaced and continuously wound spiral reinforcement.
➡️Spiral reinforcement provide lateral restrains (Poisson’s effect) and delays axial load failure (ductile).
#TypesofColumn
@etconp
HOW AEC FIRMS CAN PREPARE FOR BIM
Making the move
Talking about BIM, talked how it can be successfully adopted, there’s no one right way. The following can be taken as common steps in adopting BIM that help to both accelerate the process and reduce the disruption that can accompany change.
Step One.
Get to know BIM
Designate one or two people to learn more about how BIM will affect the way your team works. For instance, in the 2D world, many firms leave the details to the later stages of the design process. With BIM, many design details need to be worked out much earlier.
Step Two.
Communicate the change to your people.
High-level leaders should take a leading role in letting people know the firm is definitely moving to BIM. The message is “we are moving to BIM because it’s critical to our future,” not “we’re trying BIM.”
Step Three.
Account for software and hardware needs.
BIM isn’t just software; it’s a collaborative process that relies on intelligent 3D models. But you’ll need software to create those models. Take the time to explore available software, and consider whether your current hardware has sufficient processing power.
Step Four:
Develop a change management plan.
This plan should document at a high level how your team anticipates BIM changing established workflows, who needs training and when they’ll get it, and how you’ll support people when they have questions and issues. Support is probably the most important item; organizational change happens faster and more successfully when you help people adopt new ways of working.
Step Five:
Start a pilot program, and train the pilot team.
For most firms, it makes sense to run a BIM pilot. If you do dozens of small projects each year, consider completing one pilot and capturing lessons learned before running several more pilot projects.
To be continued….
#BIM
#DigitalTransformation
@etconp
Making the move
Talking about BIM, talked how it can be successfully adopted, there’s no one right way. The following can be taken as common steps in adopting BIM that help to both accelerate the process and reduce the disruption that can accompany change.
Step One.
Get to know BIM
Designate one or two people to learn more about how BIM will affect the way your team works. For instance, in the 2D world, many firms leave the details to the later stages of the design process. With BIM, many design details need to be worked out much earlier.
Step Two.
Communicate the change to your people.
High-level leaders should take a leading role in letting people know the firm is definitely moving to BIM. The message is “we are moving to BIM because it’s critical to our future,” not “we’re trying BIM.”
Step Three.
Account for software and hardware needs.
BIM isn’t just software; it’s a collaborative process that relies on intelligent 3D models. But you’ll need software to create those models. Take the time to explore available software, and consider whether your current hardware has sufficient processing power.
Step Four:
Develop a change management plan.
This plan should document at a high level how your team anticipates BIM changing established workflows, who needs training and when they’ll get it, and how you’ll support people when they have questions and issues. Support is probably the most important item; organizational change happens faster and more successfully when you help people adopt new ways of working.
Step Five:
Start a pilot program, and train the pilot team.
For most firms, it makes sense to run a BIM pilot. If you do dozens of small projects each year, consider completing one pilot and capturing lessons learned before running several more pilot projects.
To be continued….
#BIM
#DigitalTransformation
@etconp
3. Composite column
➡️When the longitudinal reinforcement is in the form of structural steel section or pipe with or without longitudinal bars, it is called as a composite column.
🚧This type of column have high strength with fairly small cross section, in addition to exhibit good fire performance.
#TypesofColumn
@etconp
➡️When the longitudinal reinforcement is in the form of structural steel section or pipe with or without longitudinal bars, it is called as a composite column.
🚧This type of column have high strength with fairly small cross section, in addition to exhibit good fire performance.
#TypesofColumn
@etconp
HOW AEC FIRMS CAN PREPARE FOR BIM (Continued)
Step Six:
Document preferred processes.
As your pilot project (or projects) progresses, have the team document BIM processes. Consider your preferred outputs and how your team needs to do BIM to support them. It’s tempting to try to create standards during or before running a pilot, but your ideas about standards will evolve as you use BIM. Starting with standards could slow your team down and complicate the BIM adoption process unnecessarily.
Step Seven:
Cultivate BIM champions.
You’ll find that some people in your firm are excited about BIM – perhaps they even learned about BIM as part of their education or while working at another firm. Try to put BIM champions on every pilot project, and provide them with the additional training and support they need to help teammates adopt BIM.
Step Eight:
Train and transition other teams.
It is important to provide training to people who are about to begin a BIM project. A common mistake is to train the whole firm at once, but then transition to BIM project by project over the course of a year or two. People on later projects will have forgotten much of what they learned in training.
Step Nine:
Integrate with other models.
You’ll see the most benefits from BIM when you share models with other firms that are also working in BIM. Many firms find that integrating models into a single, shared model accelerates the coordination process and opens the door to a new level of collaboration.
Step Ten:
Expand and innovate with BIM.
As you use BIM, you’ll find that it enables new visualization, coordination and analysis capabilities. Look for ways to turn these new capabilities into value – and new service offerings – for clients. Communicate the value of BIM to current and potential clients in your marketing, and let them know you’re ready to meet the requirements of looming BIM mandates.
Start Today
Refer to the steps above to get started, but don’t view them as rigid suggestions.
Follow the steps in the order that makes the most sense for the types of projects you do. Many steps will overlap, and you may decide to skip or alter some. When facing a mandate, the important things are to get started with an adoption plan that firm leaders support, and to keep focused on your goal, even if you need to modify the plan along the way.
#BIM
#DigitalTransformation
@etconp
Step Six:
Document preferred processes.
As your pilot project (or projects) progresses, have the team document BIM processes. Consider your preferred outputs and how your team needs to do BIM to support them. It’s tempting to try to create standards during or before running a pilot, but your ideas about standards will evolve as you use BIM. Starting with standards could slow your team down and complicate the BIM adoption process unnecessarily.
Step Seven:
Cultivate BIM champions.
You’ll find that some people in your firm are excited about BIM – perhaps they even learned about BIM as part of their education or while working at another firm. Try to put BIM champions on every pilot project, and provide them with the additional training and support they need to help teammates adopt BIM.
Step Eight:
Train and transition other teams.
It is important to provide training to people who are about to begin a BIM project. A common mistake is to train the whole firm at once, but then transition to BIM project by project over the course of a year or two. People on later projects will have forgotten much of what they learned in training.
Step Nine:
Integrate with other models.
You’ll see the most benefits from BIM when you share models with other firms that are also working in BIM. Many firms find that integrating models into a single, shared model accelerates the coordination process and opens the door to a new level of collaboration.
Step Ten:
Expand and innovate with BIM.
As you use BIM, you’ll find that it enables new visualization, coordination and analysis capabilities. Look for ways to turn these new capabilities into value – and new service offerings – for clients. Communicate the value of BIM to current and potential clients in your marketing, and let them know you’re ready to meet the requirements of looming BIM mandates.
Start Today
Refer to the steps above to get started, but don’t view them as rigid suggestions.
Follow the steps in the order that makes the most sense for the types of projects you do. Many steps will overlap, and you may decide to skip or alter some. When facing a mandate, the important things are to get started with an adoption plan that firm leaders support, and to keep focused on your goal, even if you need to modify the plan along the way.
#BIM
#DigitalTransformation
@etconp
4. Axially Loaded Column
➡️If vertical axial loads act on the center of gravity of the cross-section of the column, then it is termed as axially loaded column.
🚧Axially loaded column is rare in construction since coinciding vertical loads on the center of gravity of column cross section is not practical.
🚧Interior column of multi-storey buildings with symmetrical loads from floor slabs from all sides is an example of this type of column.
#TypesofColumn
@etconp
➡️If vertical axial loads act on the center of gravity of the cross-section of the column, then it is termed as axially loaded column.
🚧Axially loaded column is rare in construction since coinciding vertical loads on the center of gravity of column cross section is not practical.
🚧Interior column of multi-storey buildings with symmetrical loads from floor slabs from all sides is an example of this type of column.
#TypesofColumn
@etconp
👉Role of BIM in modular construction
Modular Construction refers to one or more structural units that are assembled or fabricated in a manufacturing plant away from the job site and is then transported and assembled on-site. All the modules are prefabricated with trim work and MEP system installed.
Modular Construction provides many benefits such as reduction of the need for workforce, reduction of on-site House Green Gas emissions, and improvement of the construction schedule and product quality.
Benefits of BIM in Modular Construction
• Building Information Modeling (BIM) is a 3D Modeling process that improves planning, design and construction of the buildings with this it benefits and portrays impact on off-site construction
• BIM acts as the integration for Modular Construction based on production, execution and development of prefabricated panels.
• BIM helps the construction professionals with insights and tools to efficiently plan design and construct the building and infrastructure while maintaining it.
• It enhances the communication flow among project participants and improves the design and construction process. BIM has made coordination and fabrication of MEP components in Modular Construction be easy and operate smoothly.
Facilitates shop drawings of MEP discipline.
BIM facilitates fabrication and shop drawings of MEP components in less time and accurately for the building project. It enables digital design flow to fabrication workflow easily for all the disciplines.
With the use of BIM Modelling Services in Modular Construction, use of prefabricated modules is increased along with resolving all the potential issues in the design stage itself, saving time and money on the project.
Control on the final product is higher with the advent of BIM technology.
How Architects can benefit from Modular Construction?
Architects will be able to use the Modular Construction standards to size and locate the building object in a modular reference frame that would increase the use of BIM application for the built environment in the prefabrication industry.
Collaboration with BIM in Modular Construction.
BIM analyzes the exact data of the site with collaboration and gives precise measurements of the prefabricated modules to sub-contractors. It thus enables the perfect fitting of components in the building without leakages.
BIM allows transportation of feasible space for the modules so that they can be viewed in the 3D model and set the modules in place to have efficiency and problem can be solved easily.
Materials at the off-site construction can be effective and efficient if undergone proper surveillance by using BIM through videos and measurements of the modules.
A designing team must check that the BIM integration in modules is inter-operable with the software used by prefabrication. Prefabricated elements must be delivered to a job site on time.
The following process is carried out by implementing BIM in Modular Construction:
It can create a 3D model for the representation of building modules, geometry and space for related systems. Code compliance’s reviews data is embraced with a 3D Model by fire and building officials.
Once the BIM model is completed, it can easily produce the detailed fabricated shop drawing of the building components. Building system interference can be visually presented.
Challenges of BIM in Modular Construction.
Due to modules being transported from one site or factory to another, it becomes problematic for the materials to be inspected during off-site construction.
Wastage of wrong prefabricated elements can be reduced or eliminated if used by the integration of BIM technology for modularization of the building.
MEP BIM Coordination Services are one of the essential benefits that BIM provides with integration with Modular Construction. BIM application helps to generate accurate size and space location of the prefabricated modules to ease the process smoothly.
@etconp
Modular Construction refers to one or more structural units that are assembled or fabricated in a manufacturing plant away from the job site and is then transported and assembled on-site. All the modules are prefabricated with trim work and MEP system installed.
Modular Construction provides many benefits such as reduction of the need for workforce, reduction of on-site House Green Gas emissions, and improvement of the construction schedule and product quality.
Benefits of BIM in Modular Construction
• Building Information Modeling (BIM) is a 3D Modeling process that improves planning, design and construction of the buildings with this it benefits and portrays impact on off-site construction
• BIM acts as the integration for Modular Construction based on production, execution and development of prefabricated panels.
• BIM helps the construction professionals with insights and tools to efficiently plan design and construct the building and infrastructure while maintaining it.
• It enhances the communication flow among project participants and improves the design and construction process. BIM has made coordination and fabrication of MEP components in Modular Construction be easy and operate smoothly.
Facilitates shop drawings of MEP discipline.
BIM facilitates fabrication and shop drawings of MEP components in less time and accurately for the building project. It enables digital design flow to fabrication workflow easily for all the disciplines.
With the use of BIM Modelling Services in Modular Construction, use of prefabricated modules is increased along with resolving all the potential issues in the design stage itself, saving time and money on the project.
Control on the final product is higher with the advent of BIM technology.
How Architects can benefit from Modular Construction?
Architects will be able to use the Modular Construction standards to size and locate the building object in a modular reference frame that would increase the use of BIM application for the built environment in the prefabrication industry.
Collaboration with BIM in Modular Construction.
BIM analyzes the exact data of the site with collaboration and gives precise measurements of the prefabricated modules to sub-contractors. It thus enables the perfect fitting of components in the building without leakages.
BIM allows transportation of feasible space for the modules so that they can be viewed in the 3D model and set the modules in place to have efficiency and problem can be solved easily.
Materials at the off-site construction can be effective and efficient if undergone proper surveillance by using BIM through videos and measurements of the modules.
A designing team must check that the BIM integration in modules is inter-operable with the software used by prefabrication. Prefabricated elements must be delivered to a job site on time.
The following process is carried out by implementing BIM in Modular Construction:
It can create a 3D model for the representation of building modules, geometry and space for related systems. Code compliance’s reviews data is embraced with a 3D Model by fire and building officials.
Once the BIM model is completed, it can easily produce the detailed fabricated shop drawing of the building components. Building system interference can be visually presented.
Challenges of BIM in Modular Construction.
Due to modules being transported from one site or factory to another, it becomes problematic for the materials to be inspected during off-site construction.
Wastage of wrong prefabricated elements can be reduced or eliminated if used by the integration of BIM technology for modularization of the building.
MEP BIM Coordination Services are one of the essential benefits that BIM provides with integration with Modular Construction. BIM application helps to generate accurate size and space location of the prefabricated modules to ease the process smoothly.
@etconp
5. Column with Uniaxial Eccentric Loading
➡️When vertical loads do not coincide with center of gravity of column cross section, but rather act eccentrically either on X or Y axis of the column cross section, then it is called uniaxially eccentric loading column.
🚧Column with uniaxial loading are generally encountered in the case of columns rigidly connected beam from one side only such as edge columns.
#TypesofColumn
@etconp
➡️When vertical loads do not coincide with center of gravity of column cross section, but rather act eccentrically either on X or Y axis of the column cross section, then it is called uniaxially eccentric loading column.
🚧Column with uniaxial loading are generally encountered in the case of columns rigidly connected beam from one side only such as edge columns.
#TypesofColumn
@etconp