Ethio Construction Engineering
32.3K subscribers
6.28K photos
359 videos
1.99K files
3.35K links
🔨 World Construction Engineering
Latest updates, tips, and tutorials on building, civil engineering, and construction in World.
Learn, build, and grow with us!

📨 @Philemona7 Or @ETCONpBOT

For Ad:- https://telega.io/c/etconp
Download Telegram
👉Some important facts

🚧1. Weight of one cement bag = 50 kg

🚧2. Minimum thickness of slab = 125 mm

🚧3. Minimum lintel thickness =15 cm

🚧4. Minimum diameter of bars used in slab= 8 mm

🚧5. Minimum diameter of bars Used in column = 12 mm

🚧6. Maximum diameter of bars in slab= 1/8x(thickness of slab )

🚧7. Maximum chair spacing = 1m

🚧8. Initial setting time of cement = 30 min

🚧9. Final setting time = 10 hrs ( 600 minutes )

🚧10. DPR = Detailed Project Report

🚧11. Unit weight

▶RCC = 25 KN/ m3
▶PCC = 24 KN/ m3
▶Steel = 7850 kg/ m3

🚧12. Minimum number of bars For square column or rectangular = 4 bars & For circular column = 6 bars

🚧13. Weight of steel = D2/162.2 kg/m.

🚧14. Slope of staircase = 25° -40° from horizontal.

🚧15. Size of concrete testing cube= (150x150x150)mm.

🚧16. Concrete cube is filled in 3 layers.

🚧17. Slump cone is filled in 4 layers.

🚧18. Cement should be used within three months of manufacturing.

🚧19. Minimum thickness of shear wall = 150 mm.

🚧20. Maximum thickness of shear wall = 400 mm.

🚧21. Universal testing machine is used for compression Test of concrete and tensile test of steel reinforcement.

🚧22. Minimum curing period of normal weather conditions is = 7 days

🚧23. Minimum curing period of dry and hot weather conditions is = 10 days

🚧24. Minimum percentage of steel in column = 0.8% of the cross section.

🚧25. Normal cover

➡️Footing = 50 mm
➡️Column = 25 mm
➡️Slab = 15 mm
➡️Beam = 25 mm

🚧26. Number Of Clear span stirrups in beam = Center to Center length /Total Length +1

🚧27. RCC is affected by water because of the corrosion of reinforcement bars.

🚧28. PCC is not affected by the water

🚧29. Maximum free fall of concrete = 1.5 m

🚧30. Air voids left in concrete is called as Honey Combing.

🚧31. The transverse reinforcement of column are called TIES.

🚧32. The transverse reinforcement in beams are called STIRRUPS.

🚧33. Cement ingredients are Burnt @ 1400°C temperature

🚧34. Short columns fail in Crushing.

🚧35. Long columns fail in Buckling.

🚧36. Intermediate columns can fail both in Buckling and Crushing.

🚧37. Strength of reinforcement shouldn't be less than 15 % of its designated strength.

🚧38. Compressive strength of bricks

▶️1st class bricks = 105 kg/cm2.

▶️2nd class bricks = 70 kg/cm2.

▶️3rd class bricks = 35 kg/cm2.

🚧39. PH value of water used concrete should not be less than 6.

🚧40. Riser = (150 - 200) mm.

🚧41. Tread = (250 - 300) mm.

🚧42. Height of parapet wall should be= 1m.

🚧43. TMT - Thermo mechanically treated bars.

🚧44. TMX - Thermax powered bars

🚧45. SDB - Super ductile bars.

#ConstructionNotes

@etconp
👍3
👉ለኢትዮጵያ ኮንስትራክሽን ሥራ ተቋራጮች ማሕበር አባላት በሙሉ

➡️የኢትዮጵያ ኮንስትራክሽን ሥራ ተቋራጮች ማሕበር ዓመታዊ ጠቅላላ ጉባዔውን ህዳር 17 ቀን 2013 ዓ.ም ከጠዋቱ 2፡00 ሰዓት ጀምሮ በኢንተር ኮንቲኔንታል ሆቴል የመሰብሳቢያ አዳራሽ ያካሂዳል፡፡

🚧በዚህ ጠቅላላ ጉባዔ ላይም አሁን ያለው የዳይሬክተሮች ቦርድ የሥራ ጊዜውን የሚያልቅ በመሆኑ የዳይሬክተሮች ቦርድ ምርጫ የሚካሄድበት ይሆናል፡፡

🚧ስለሆነም እርስዎም በዚሁ ጉባዔ ላይ እንዲገኙ የማሕበራችን የዳይሬክተሮች ቦርድ የአክብሮት ጥሪውን ያስተላልፋል፡፡

🚧የእርስዎ በዚህ ጠቅላላ ጉባዔ ላይ መሳተፍ አሁን በ ኮንስትራክሽን ኢንዱስትሪው ተዋንያን ላይ የተጋረጠውን ተግዳሮት ለመቋቋም የሚያስችል የአመራር ቡድን ለመፍጠር ስለሚያግዝ በጉባዔው ላይ መሳተፍዎ ከመሳተፍም በላይ እንደሆነ እንዲገነዘቡት በዚህ አጋጣሚ አበክረን ለማሳሰብ እንወዳለን፡፡

📩የኢትዮጵያ ኮንስትራክሽን ሥራ ተቋራጮች ማሕበር የዳይሬክተሮች ቦርድ

@etconp
👉this picture is not from Europe, or Americas. Yes this is Africa! Bay Luanda Waterfront, Luanda, Angola.

➡️The Bay of Luanda gave rise to the urban and architectural waterfront of the capital of Angola.

🚧Overtime, it has been the most important public space of the city and the social and economic epicenter of the country.

➡️It has a new green layer with trees, bushes and grass , a set of squares connected with public space system of the city and pedestrian and bike paths.

🚧It has places for civic meetings and places to rest, areas for sport activities, new urban services, equipment and furniture.

🚧It enables greater social interaction and boosts recreational and cultural activity.

@etconp
👉Field Compaction

➡️Ordinary compaction in the field is done by rollers. Of the several types of rollers used, the most common are

1⃣Smooth wheel rollers (or smooth drum rollers)
2⃣Pneumatic rubber tired rollers
3⃣Sheeps foot rollers
4⃣Vibratory rollers

🏷Let us brief it 🔓

🚧1⃣Smooth wheel rollers that can also create vertical vibration during compaction. Smooth wheel rollers are suitable for proof rolling subgrades and for finishing the construction of fills with sandy or clayey soils.

▶️They provide 100% coverage under the wheels, and the contact pressure can be as high as 300 to 400 kN/m2. However, they do not produce a uniform unit weight of compaction when used on thick layers.

🚧2⃣Pneumatic rubber tired rollers are better in many respects than smooth wheel rollers.

▶️Pneumatic rollers, which may weigh as much as 2000kN, consist of a heavily loaded wagon with several rows of tires.

▶️The tires are closely spaced four to six in a row. The contact pressure under the tires may range up to 600 to 700 kN/m2, and they give about 70 to 80% coverage.

▶️Pneumatic rollers, which can be used for sandy and clayey soil compaction, produce a communication of pressure and kneading action.

🚧3⃣Sheepsfoot rollers consist basically of drums with large numbers of projections.

▶️The area of each of the projections may be 25 to 90 cm2.

▶️These rollers are most effective in compacting cohesive soils.

▶️The contact pressure under the projections may range from 1500 to 7500kN/m2.

▶️During compaction in the field, the initial passes compact the lower portion of a lift.

▶️During compaction in the field, the initial passes compact the lower portion of a lift. Later, the middle and top of the lift are compacted.

🚧4⃣Vibratory rollers are efficient in compacting granular soils.

▶️Vibrators can be attached to smooth wheel, pneumatic rubber tired or sheepsfoot rollers to send vibrations into the soil being compacted.

🏷In general, compaction in the field depends on several factors, such as
🔨The type of compactor
🔨Types of soil
🔨Moisture content
🔨Lift thickness
🔨Towing speed of the compactor and
🔨Number of passes the roller makes.

@etconp
👉የፕሮጀክቶች መጓተት በ4 ቢሊየን ብር የተጀመሩ ፕሮጀክቶች እስከ 16 ቢሊየን ብር ወጪ እንዲጠይቁ እያደረገ ነው

➡️የፕሮጀክቶች አስተዳደራዊ አፈጻጸም በጣም ዝቅተኛ በመሆኑ ምክንያት በ4 ቢሊየን ብር የተጀመሩ ፕሮጀክቶች እስከ 16 ቢሊየን የሚጠጋ ብር እንደሚጨርሱ በህዝብ ተወካዮች ምክር ቤት የተፈጥሮ ሀብት፣ መስኖና ኢነርጂ ጉዳዮች ቋሚ ኮሚቴ አስታወቀ።

🚧ቋሚ ኮሚቴው የውሃ፣ መስኖና ኢነርጂ ሚኒስቴርንና የተጠሪ ተቋማቱን የ2013 በጀት ዓመት አንደኛ ሩብ ዓመት እቅድ አፈጻጸም ገምግሟል፡፡

🚧በግምገማው ሚኒስቴር መስሪያ ቤቱ ከተጠሪ ተቋማት ጋር ተቀናጅቶ በመስራትና  ቋሚ ኮሚቴው የሚሰጣቸውን ግብረ መልሶች በግብአትነት ከመጠቀም እንዲሁም፤ ሊያጋጥሙ የሚችሉ ወቅታዊ አደጋዎችና ችግሮችን ታሳቢ አድርጎ ከማቀድ አኳያ ውስንነት እንዳለበት ቋሚ ኮሚቴው በዝርዝር አንስቷል፡፡

🚧ከአፈፃፀም ዝቅተኛ መሆን ባሻገር አብዛኛዎቹ መሰረተ ድንጋይ ከማስቀመጥ ያለፈ ተጠናቀው ህብረተሰቡን ተጠቃሚ ሲያደርጉ አለመታየቱን የቋሚ ኮሚቴው አባላት አስረድተው በቀጣይ ትኩረት ሊሰጠው እንደሚገባ አጽንኦት ሰጥተዋል፡፡

🚧በመሆኑም በ2013 በጀት ዓመት ችግሩ ታሳቢ ተደርጎ መፍትሄ ሊቀመጥለት እንደሚገባ ቋሚ ኮሚቴው መግለፁን ከምክር ቤቱ ያገኘነው መረጃ ያመለክታል፡፡

Via FBC

@etconp
👉Three Gorges Dam

➡️The Three Gorges Dam is a hydroelectric gravity dam that spans the Yangtze River by the town of Sandouping,in Yiling District, Yichang, Hubei province, China.

🚧The Three Gorges Dam has been the world's largest power station in terms of installed capacity (22,500 MW) since 2012.

🚧In 2018, the dam generated 101.6 tera watt-hours (TWh), breaking its previous record, but was still slightly lower than the Itaipú Dam, which had set the world record in 2016 after producing 103.1 TWh.

*⃣Country China
*⃣Location Sandouping, Yiling District, Hubei
Purpose Power, flood control, navigation
*⃣Construction began December 14, 1994
*⃣Opening date 2003
*⃣Construction cost ¥203 billion (US$31.765 billion)
*⃣Owner(s) China Yangtze Power (subsidiary of China Three Gorges Corporation)

🏷Dam and spillways

⏺Type of dam Gravity dam Impounds Yangtze River
⏺Height 181 m
⏺Length 2,335 m
⏺Width (crest) 40 m
⏺Width (base) 115 m
⏺Spillway capacity 116,000 m3/s

🏷Reservoir Creates Three Gorges Reservoir

▶️Total capacity 39.3 km3
▶️Catchment area 1,000,000 km2
▶️Surface area 1,084 km2
▶️Maximum length 600 km
▶️Normal elevation 175 m

🏷Power Station Commission date 2003–2012
➡️Type Conventional Hydraulic head Rated: 80.6 m
➡️Maximum: 113 m
➡️Turbines 32 × 700 MW 2 × 50 MW Francis-type
➡️Installed capacity 22,500 MW
➡️Capacity factor 45%
➡️Annual generation 87 TWh (310 PJ) (2015)

🚧The dam body was completed in 2006.

➡️The power plant of the dam project was completed and fully functional as of July 4, 2012, when the last of the main water turbines in the underground plant began production.

➡️Each main water turbine has a capacity of 700 MW.

➡️Coupling the dam's 32 main turbines with two smaller generators (50 MW each) to power the plant itself, the total electric generating capacity of the dam is 22,500 MW.

➡️The last major component of the project, the ship lift, was complete in December 2015.

➡️As well as producing electricity, the dam is intended to increase the Yangtze River's shipping capacity.

➡️By providing flood storage space, the dam reduces the potential for floods downstream which could possibly affect millions.

➡️China regards the project as a monumental social and economical success, with the design of state-of-the-art large turbines, and a move toward limiting greenhouse gas emissions.

➡️However, the dam flooded archaeological and cultural sites, displaced some 1.3 million people, and had caused significant ecological changes including an increased risk of landslides.

➡️The dam has been controversial both domestically and abroad.

#DamConstruction

@etconp
❤1👍1
👉Oresund bridge Denmark, Sweden

➡️The oresund Bridge is a marvel of modern engineering.

🚧It consists of a combined road and rail line that runs for 8 kilometers, at which point it then transitions into an under water tunnel.

🚧In total, the bridge tunnel stretches 12 kilometers, connecting Denmark and Sweden.

🏷Construction of the oresund Bridge was an engineering marvel all it's own.

🚧It was part road bridge, part rail bridge, part tunnel, part rail line.

🚧The number of design constraints and moving parts to the process was absolutely stunning.

🚧As for the construction of the bridge supports, there are 4 main towers. These massive towers were poured in sections that were placed using specially built rigs.

#ConstructionTechnology

@etconp
Forwarded from Ethio Construction Engineering (जॉर्डनो ג׳ורדנו ጆርዳኖ جوردانو จอร์แดโน่ JORDANO Ιορδάνοςஜார்டானோ)
(Earthquake) የመሬት መንቀጥቀጥ እንዴት እንደ LOAD consider እንደሚደረግ እንንገራችሁ።

The SI unit of LOAD is NEWTON(N). And Load is a type force.
የ Load SI unit ኒውተን ነው። እናም the second law of Newton አንድ እውቅ formula አስተዋውቆናል። እሱም

F=m x ā
Where F= force ( load in our case )
m= mass
ā= acceleration

ስለዚህ

👉🏿‘m’ mass= የህንፃው ክብደት (self weight)

👉🏿 ‘ā’ acceleration = wave from epicenter የመሬቱ እርግብግቢት


How do we consider earthquake as a LOAD ?


LOAD is a type of force. The SI unit of LOAD is Newton (N).
Newton introduced us to Force in his second law. That is

F= m x ā

Where m= mass
ā= acceleration

Therefore

👉🏿 m= mass of the building (structure)

👉🏿ā = wave from epicenter


Join us on telegram:- @etconp

@etconp
Forwarded from Ethio Construction Engineering (जॉर्डनो ג׳ורדנו ጆርዳኖ جوردانو จอร์แดโน่ JORDANO Ιορδάνοςஜார்டானோ)
bridge excavation@etconp.pdf
306.7 KB
Bridge

የድልድይ ስራ ላይ እያለው የከርሰ ምድር ቁፋሮ፣ የ foundation requirement፣ ደህንነት (safety ) በተመለከተ ፅሁፍ ይዘንላችሁ እንመጣለን ባልነው መሰረት እንካችሁ ብለናል።

This presentation contains

1.1 excavation - general
1.2 environmental constraints
1.3 safety
1.4 bridge inspector’s record
1.5 soil materials and ground water
1.6 foundation requirement
1.7 dry structural excavation
1.8 wet structural excavation
1.9 channel excavation
1.10 material disposal
1.11 checklist

እጥር ምጥን ያለች presentation ነች።

#bridge

@etconp
Forwarded from Ethio Construction Engineering (जॉर्डनो ג׳ורדנו ጆርዳኖ جوردانو จอร์แดโน่ JORDANO Ιορδάνοςஜார்டானோ)
corona virus on construction industry@etconp.pdf
98.3 KB
Corona update

የ corona virus እንዴት ኮንስትራክሽን industryው ላይ የሚያሳርፈው ተፅዕኖ።

How corona virus affect the construction industry?

ይህ PDF ያንብቡት 98.2KB ነው።
This pdf is prepared by @etconp.

Pray together. unity always has strength
Wash your hand
sanitize in every 20 minutes

አብረን እንጸልይ አንድነት ጥንካሬ አለው።
እጆን ይታጠቡ!

#pray #sanitize #covid19

@etconp
Forwarded from Ethio Construction Engineering (जॉर्डनो ג׳ורדנו ጆርዳኖ جوردانو จอร์แดโน่ JORDANO Ιορδάνοςஜார்டானோ)
analysis_&_proportioning_of_retaining_wall_example_@etconp.pdf
8.2 MB
👉Analysis and proportioning of retaining wall example 📚
.
👌ይህን ፋይል ሁላችንም ጋር ሊኖር ይገባል ብዬ አሳስባለው።
.
🚧የተሰሩ የretaining wall ጥያቄዎች ...

#retainingwall #analysis #proportioning

@ETCONp
Forwarded from Ethio Construction Engineering (जॉर्डनो ג׳ורדנו ጆርዳኖ جوردانو จอร์แดโน่ JORDANO Ιορδάνοςஜார்டானோ)
survying.rar
66.7 MB
Surveying file

Content
1. introduction to surveying
2. Unit of measurement
3. Leveling
4. Measurement of Angle
5. Traverse and traverse computation
6. Area computation
7. Topographic surveying
8. Volumes of earth work
9. GPS presentation

And advanced book ( engineering surveying)

ፋይሉ 67.8MB ስለሆነ WiFi ቢጠቀሙ ይመረጣል።

ፋይሉ compress ተደርጓል ስለዚህ winRAR ያስፈልጎታል።

በውስጡ 12 PDF ፋይሎች አሉት።
#survying

@etconp
👍1
Forwarded from Ethio Construction Engineering (Yonathan)
#AlertEpidemics

Standard conditions of contracts about epidemics

▶️ Standard condition of contract for construction of civil work projects December, 1994
▶️ fidic part II standard condition of contract 1987


Clause 34 sub-clause(6). Epidemics
In the event of any outbreak of illness of an epidemic nature, the Contractor shall comply with and carry out such regulations, orders and requirements as may be made by the Government, or the local medical or sanitary authorities for the purpose of dealing with and overcoming the same.

@etconp
➡Hydraulics and water supply Lecture @COTMp
.
👉ለዛሬ ደሞ የ ላየኛው የምድር ውሃ (surface water) ለማጣራት የምንጠቀማቸው ዘዴዎች ኣዘጋጅተናል 👇
.
⓵ስክሪኒንግ (screening) - ይህ የመጀመረርያው የማጣራት
ደረጃ ሲሆን በዚህ የማጣራት ዘዴ ውስጥ በውሃው ላይ የሚንሳፈፉ ግዙፍ አካላትን ለምሳሌ የዛፍ ጉቶ ፣ግንድ፣ ቅጠል እና ልዩ ልዩ የፕላስቲክ ተንሳፋፊ ቁሳቁሶች ወደ ዋናው የማጣሪያ ገንዳ እና ስርዓት
እንዳይገቡ ያግዳል ።
.
⓶ማርጋት (Coagulation )፦ በዚህ የማጣራት ደረጃ ላይ
ለአይን እይታ ያነሱ ጥቃቅን
አካላትን (Particle size 10^-7cm የሚሆኑ) በማርጋት እና
የኬሚካል ቻርጃቸውን ኒውትራላይዝ የሚያረግ ኬሚካል በመጨመር እርስ በእርሳቸው
እንዲሳሳቡ ማድረግ ነው ።
ለዚህ የአልሙኒየም ፖሊመሮች (Alum) እና አይረን (Fe+3)
አገልግሎት ላይ ይውላሉ።
እንደ የቁልቋል ተክል ያሉ የተፈጥሮ አርጊዎች (coagulants) መጠቀምም ይቻላል
.
⓷ጉግለት (Flocculation)፦ ይህ እርከን ፤ ማርጋት
(coagulation ) ወቅት የረጉ ጥቃቅን አካላትን እርስ በእርሳቸው ቦንድ እስኪፈጥሩ እና እርስ በእርሳቸው ተጣብቀው እስኪጓግሉ ውሃው በተለያየ ፍጥነት የሚማሰልበት ነው።
ይህ ዘዴ ሜካኒካል ወይም ማኑዋል በሆነ መልኩ ይተገበራል።
.
⓸መዝቀጥ/ማዝቀጥ (sedimentation) ፦ በፍሎኩሌሽን ወቅት የጓጎለው ጥቃቅን አካላት በዚህን የማጣራት ደረጃ እንዲዘቅጡ ይደረጋል ። ይህ ዘዴ የሚተገበረው የሚጣራው የውሃን ፍጥነት በመቀነስ ግራቪቲን ተጠቅሞ እንዲዘቅጥ ማድረግ ነው።
በግራቪቲ ለማዝቀጥ የሚከብዱ እጅግ ጥቃቅን ቆሻሻዎችን በፍሎኩሌሽን ወቅት ስንጠቀማቸው የነበሩ ኬሚካሎችን በመጠቀም እንዲዘቅጡ ይደረጋል።
.
⓹ ማጥራት (filtration ) ፦ በዚህ የማጥራት ደረጃ ከማዝቀጥ
ደረጃ ያለፉ ጥቃቅን ቆሻሻዎችን እጅግ ጥቃቅን ቀዳዳዎች ባሉት አካል (medium ) እንዲያልፍ በማድረግ የድፍረስነቱን መጠን እጅግ መቀነስ ነው።
.
⓺ማከም (Disinfection) ፦ ከላይ በተጠቀሱ የማጣሪያ ሂደቶች የተጣራው ውሃ
(በዋነኛነት ከተለያዩ ህይወት ከሌላቸው ጥቃቅን ቆሻሻዎች)
ለህብረተሰቡ ለአገልግሎት
ከመድረሱ በፊት በዚህ ሂደት (ዲስኢንፌክሽን) ማለፍ አለበት ።
ምክንያቱም ውሃው ለአገልግሎት የሚቀርበው ከተለያዩ በአይን ከማይታዩ በሽታ አምጪ ተህዋስያን ነፃ መሆኑ ሲረጋገጥ ነው ። ዲስኢንፌክሽን ውሃውን በማፍላት ፣ ሚካኒካል
በሆነ መልኩ ፣ ለጨረር በማጋለጥ (radiation ) እንደሁም በኬሚካል ሊከናወን ይችላል።
በሃገራችን በዋነኛነት
ሃሎጅኖችን (ብሮሚን ክሎሪን እና አይኦዲን ) በመጠቀም
ኬሚካል በመጠቀም ውሃን እናክማለን ።
፟
➡ከዚህ ሁሉ የማጣራት ሂደት በኋላ የተጣራው ውሃ ይጠራቀምና
ለተጠቃሚዎች ይዳረሳል።
.
▶ስለ surface waterን የማጣራት ሂደቶች ጥቂት የሆነ ገለፃን እንዳደረግንላችሁ ተስፋ
እናደርጋለን ። ርእሱ ሰፊ እንደመሆኑ ዳግመኛ በጥልቀት ለመዳሰስ ቃል እንገባለን✌
.
👇👇👇👇👇
Join for more updates via the link below;
t.me/COTMp
👆👆👆👆👆
⚡ አሁኑኑ Join በማረግ እና ለጓደኛዎ እና ለሚያቁት ሁሉ ሼር ያድርጉ።
👉Load Combination
.
Load Combination - አንድ ፎቅ ላይ የሚመጡ ሎዶችን Analyze ስናደርግ ሁሉም ሎዶች (LL,DL,EQ,WL, etc)
በተመሳሳይ ሰዓት ይከሰታሉ ተብሎ አይታሰብም እንደዛ ቢሆን ኖሮ ለትንንሽ ፎቆች ትልልቅ size ያላቸው Beam, Column እና
Slab ባስፈለገንና Uneconomical በሆንን ነበር፡፡ እንትን ሎድና እንትን ሎድ አንድ ላይ ሲከሰት ወዘተ እያልን Load
Combination እናወጣለን፡፡ ሎዶቹንም በ Factor እናባዛቸዋለን:: Factor ያስፈለገበትም ምክንያት Load
occurrence probability እና በተለያዩ ምክንያቶች የሚፈጠሩ
Load Uncertainties ለማስወገድ ነው፡፡
.
ስንት Load Combination አለ??
.
.
ብዙ ምሁራን በ Load Combination ብዛት ሲወዛገቡ ይታያል፡፡
አንዳንዶች 2 ነው ይላሉ ፤ ሌሎች 7 ነው ይላሉ ፤ ሌሎሎሎች 5
፤ ሌሎሎሎሎሎች 11……..ለማንኛውም ሰባትና ዘጠኝ ናቸው!!!
.
.
ሰባት የሚሆነው Earth Quake እና Wind Loadን እኛ
ካልኩሌት አድርገን ከሁለቱ Govern የሚያደርገውን ከለየን በኋላ
Governing ሎዱን በቁጥር ለሴፍትዌሩ (SAP/Etabs)
ስንሰጠው ሰባት ነው፡፡
.
.
ዘጠኝ የሚሆነው የ Earth Quake ወይም Wind ሎዱን የተለያዩ ፋክተሮች ለሶፍትዌሩ እንሰጠውና እራሱ ሶፍትዌሩ ሎዱን ካልኩሌት አድርጎ አንዲጠቀም ከፈለግን ዘጠኝ Combo እንጠቀማለን፡፡
👉PROPERTIES OF AGGREGATES FOR CONCRETE @COTMp
.
▶Approximately 75% of the volume of concrete is occupied by aggregates,so
quality of aggregates plays an important role in determining properties of concrete.
*Aggregates come in various shapes, sizes, and materials ranging from fine particles of sand to large, coarse rocks. *Natural aggregates are formed by process of weathering and abrasion or by artificially crushing large parent mass.
Because cement is the most expensive ingredient in making concrete, it is
desirable to minimize the amount of cement used. 70 to 80% of the volume of
concrete is aggregate in order to keep the cost of the concrete low.
*Soft, porous aggregates can result in weak concrete with low wear resistance, while using hard aggregates can make strong concrete with a high resistance to abrasion.
*Aggregates are of two basic types: Coarse: crushed rock, gravel or screenings.
*Fine: fine and coarse sands and crusher fines Aggregates should be clean, hard, and strong.
*The aggregate is usually washed to remove any dust, silt, clay, organic matter, or other impurities that would interfere with
the bonding reaction with the cement paste.
*The choice of aggregate is determined by the proposed use of the concrete.
*Normally sand, gravel, and crushed stone are used as aggregates to make concrete.
*The aggregate should be well-graded to improve packing efficiency and minimize the amount of cement paste needed. Also, this makes the concrete more workable.
Some of the important properties of aggregates are discussed below.
▶PROPERTIES OF AGGREGATES
1. SOUNDNESS:Rocks that undergo volume changes due to wetting and drying are rare. However, aggregate is susceptible to volume change during freezing and thawing cycles.
*Freezing can cause internal stresses to build up as water inside the aggregate freezes and expands.
2. WEAR RESISTANCE
A good aggregate will be hard, dense, strong, and
free of porous material. The abrasion resistance of
aggregate can be tested by the Los Angeles abrasion test; however, this test does not match
well with concrete wear in the field.
3. ALKALI-AGGREGATE
REACTION: An expansive reaction between some reactive forms of silica with the aggregate and alkalis in the cement paste.
*The result is overall cracking in the
structure, manifesting itself in map or pattern cracking at the surface. *This reaction can be
controlled most easily by using low-alkali cements.
However, due to changes in manufacturing, low-
alkali cements may not be feasible.
*A better approach is to avoid aggregate with the potential or proven record of reactivity. A low w/c ratio is very impermeable and will slow down the reaction but not stop it. No adverse reactions will occur without external water.
4. OTHER ALKALI-SILICA
REACTIONS: Sand-gravels found in river systems of Kansas and Nebraska are highly reactive and cause map cracking. *Replacement of 30% of the aggregate with
crushed limestone is effective in reducing the damage. Basically, it results in the separation of flat clay minerals causing very slow expansion.
5. ALKALI-CARBONATE REACTIONS: An expansive reaction involving clayey
carbonate rock. Reaction can be controlled by using low-alkali cements or blending aggregate with other less reactive material.
*ASTM has set standards for deleterious substances in aggregates, which depend on application.
6. IMPURITIES: Solid materials – particles passing a 200- mesh sieve.
*These fine particles may increase water requirements and interfere with surface bonding
between cement and coarse aggregates.
Soluble substances –organic matter may interfere chemically with alkaline cement pastes affecting setting time. *Aggregates obtained from the sea should be thoroughly cleaned
to avoid problems from salt contamination.
7. UNSOUND PARTICLES
Soft particles such as clay lumps, wood, and coal
will cause pitting and scaling at the surface.
Organic compounds can be released which interfere
with setting and hardening. Weak material of low density which have low wear resistance should also be avoided.
https://telegram.me/COTMp
👉Morning Lecture @COTMp
.
*Different Ingredients of Cement-Their Proportion,
Functions and Limitations
The Ordinary Portland cement contains different
ingredients with varied proportions. Each ingredients
imparts different property to the cement. To
produce good quality of cement, we must know the
proportions, functions and limitations of different
ingredients of cement.
Proportion of Ingredients of Cement
Different ingredients of cement and their proportions
are as follows:
1. Lime (CaO)
2. Silica (SiO )
3. Alumina(Al O )
4. Iron (Fe O )
5. Magnesia (MgO)
6. Calcium sulfate (CaSO )
7. Sulfur (SO )
8. Alkalis
Functions and Limitations of Cement Ingredients
1. Lime (CaO)
Lime or calcium oxide is the most important
ingredient of cement. The cement contains 60 to
67% of lime in it. It is obtained from limestone,
chalk, shale etc. Adequate quantity of lime in
cement is helpful to form the silicates and
aluminates of calcium.
If lime is added in excess quantity the cement
becomes unsound as well as expansion and
disintegration of cement will occur.
If lime content is lower than the minimum
requirement strength of cement will reduce and also
setting time of cement will decrease.
2. Silica
Silica or silicon dioxide is the second largest
quantity of cement ingredients which is about 17 to
25%. Silica can be obtained from sand, argillaceous
rock etc. Sufficient quantity of silica helps for the
formation of di-calcium and tri-calcium silicates
which imparts strength to the cement.
Excess silica in cement will increase the strength of
cement but at the same time setting time of
cement also increased.
3. Alumina (Al O )
Alumina in cement is present in the form of
aluminum oxide. The range of alumina in cement
should be 3 to 8%. It is obtained from bauxite,
alumina contain clay etc. Alumina imparts quick
setting property to the cement.
In general, high temperature is required to produce
required quality of cement. But alumina when added
with cement ingredients it behaves as a flux and
reduces the clinkering temperature which finally
weakens the cement. So, to maintain the high
temperature alumina should not be used in excess
quantity.
4. Iron oxide (Fe O )
Iron oxide quantity in cement is ranges from 0.5 to
6%.It can be obtained from fly ash, iron ore, scrap
iron etc. The main function of iron oxide is to
impart color to the cement.
At high temperatures, Iron oxide forms tricalcium
aluminoferrite by reacting with aluminum and
calcium. The resultant product imparts the strength
and hardness properties to the cement.
5. Magnesia (MgO)
Cement contains Magnesia or Magnesium oxide in
the range of 0.1 to 3%. Magnesia in cement in
small quantities imparts hardness and color to the
cement.
If it is more than 3%, the cement becomes unsound
and also strength of the cement reduces.
6. Calcium sulfate (CaSO )
Calcium sulfate is present in the form of gypsum in
the cement. It is found together with limestone. It
ranges between 1 to 3%.
The function of calcium sulfate in cement is to
increase the initial setting time of cement.
7. Sulfur (SO )
Sulfur or sulfur trioxide in the cement is about 1 to
3%. Its function is to make the cement sound. If it
is in excess quantity the cement becomes unsound.
8. Alkalis
Alkalis like soda and potash are present in the
cement which normally ranges from 0.1 to 1%.
During manufacturing process of cement most of
the alkalis are carried away by the flue gases at the time of heating. Hence cement contains very small quantities of alkalis in it.
If alkalis content is more than 1% then it will cause
several problems like alkali aggregate reaction,
efflorescence, staining etc.
.
👇👇👇👇👇
Join for more updates via the link below;
t.me/COTMp
👆👆👆👆👆
⚡ አሁኑኑ Join በማረግ እና ለጓደኛዎ እና ለሚያቁት ሁሉ ሼር ያድርጉ።
❤1
👉BASICS OF CRACKING PROBLEMS: @COTMp
.
▶The subject “ CRACKS “ or “ CRACKING “ in
concrete is indeed much debated. However, there is
inadequate clarity as to the reason for cracking and what may be done to limit its occurrence or
eliminate it altogether.
The phenomenon of the appearance of cracks in
concrete is often a subject that raises several
questions. Either at the initial stage or with time,
cracks may appear in a concrete structure. It should first of all be accepted that cracks of some type or other are inevitable in any concrete. They can be minimized to a large extent by proper practices.
*Cracks may be big or small, structural or non-
structural. All of them can be a nuisance by way of
either marring the appearance or function as a passage for atmospheric polluting gases and
moisture to either the body of concrete and causes
distress.
*Cracks in the concrete structure do not always
mean that the structure is not usable. As cracking
of concrete is inherent, what really matters is the
type of structure and the nature of cracking. Cracks
that are acceptable for building structures may not be acceptable for water relating structures.
Considering that cracking can never be completely
eliminated, it is necessary to be aware of the
causes, evaluation and the methods of repair
whoever required.
CRACKS Cracks are generally of tow types : Structural and nonstructural
*Cracks can occur in hardened or unhardened concrete.
*STRUCTURAL CRACKS
It is fundamental that hardened reinforced concrete cracks in the tensile zone when subjected to externally imposed structural loads. By means of appropriate design and detailing technique, these cracks can be limited to acceptable levels in terms
of structural integrity and aesthetics.
*NON_STRUCTURAL CRACKS
**Concrete is also liable to crack in both the plastic
and hardened states due to the nature of its
constituent materials. These intrinsic cracks are as inevitable as structural cracks. It is often possible
to predict when intrinsic cracks are likely and to
limit them to acceptable levels by means of good
design and/or proper construction techniques.
*DORMANT AND LIVE CRACKS:
Cracks caused by shrinkage, temperature gradient due to hydration and alkali silica reaction ( ASR ) are less dangerous the cracks caused by thermal expansion and loads. This is because shrinkage and hydration temperature gradient result in dormant cracks ( where the width does not vary with time) and other mechanisms result in live
cracks (where the width increases with time
Dormant cracks, especially narrow ones, are more
likely to undergo auto genius healing and
realkalisation. The crack may heal owing to
following conditions:
• carbon dioxide diffusing into the crack leading to
carbonation of the calcium hydroxide and
precipitation of calcium carbonate.
• Cement hydration due to presence of moisture.
• Hydration diffusing from the bulk concrete into the
heaked zone thereby increasing the pH in that area.
Live cracks are more likely than domant ones. They
result in collection of debris at the base owing to movement of the sides on the cracks. This can
impede temporarily the passage of depassivating
substances to the reinforcements. However,
autodeneous healing is unlikely with live cracks.
▶CAUSES OF CRACKING:
Cracking will occur whenever the applied strain exceeds the tensile strain capacity of the concrete.
*The tensile strain capacity of concrete varies with age and with
Age at which cracks may occur.
*Cracks can appear at any time. The age which
some typical can occur are given in the Table.
▶TABLE – AGE AT WHICH CRACKS MAY APPEAR:
*Sr. no. types of cracks Age
1. plastic shrinkage First few minutes or hours after
concreting .
2. plastic settlement First few minutes or hours
after concreting.
3. due to corrosion After one year or many years.
4. due to loads After loads are imposed and the
time duration of loading.
👇👇👇👇👇
5. due to weight Just after formwork support are
removed.6. due to chemical changes in hardened concrete After one or many years depending in
chemical attack from outside (sulphate ) Or
chemical reaction from within (ASR)
*CRITICAL CRACK WIDTH:
The most common reasons for controlling crack width are following:
APPERANCE : Unsightly cracking should be avoid
since it may cause concern to the occupants of the external structure. Ti may also contribute to
unsightly staining on exposed external surfaces,
where salts and rust are washed out from the crack.
*DURABILITY: Excessively wide cracks may lead to
corrosion of the reinforcement which in turn may lead to spalling of concrete due to the expansive nature of the corrosion process.
*WATER-TIGHTNESS: This is of importance in water
retaining structures.
In particular instances there may be other reasons for controlling cracking in addition to the three reasons cited above.
Crack width is, generally, to be taken to mean the
measurable width of a crack at the surface of
concrete. Crack width limitation is important from durability considerations. Most structural codes
prescribe maximum allowed crack widths.
Codes normally consider cracking caused by
external imposed conditions such as live loading and provide formula for calculating the crack width in the design phase. Mainly bending and tension or bending and axial load are considered. The direction of such cracks is perpendicular to the direction of the main reinforcement. Plastic
shrinkage cracks follow the line of reinforcement.
According to IS: 456-2000 the surface of the width
of the cracks should not in general exceeds o.3 mm
in members where cracking is not harmful and does not have any serious effect either on the
preservation of reinforcing steel or on the durability
of the structures.
In members, where cracking of the tensile zone is harmful either because they are moisture or in contact with soil or groundwater, an upper limlt of 0.2 mm is suggested.
*For aggressive conditions the surface width of
cracks should not generally exceed 0.1 mm. The crack width conditions the surface width of cracks should not be generally exceed 0.1 mm. The crack width is measured at the surface for the above purposes. However some other codes specify the
width at points near the reinforcement.
.
👇👇👇👇👇
Join for more updates via the link below;
t.me/COTMp
👆👆👆👆👆
⚡ አሁኑኑ Join በማረግ እና ለጓደኛዎ እና ለሚያቁት ሁሉ ሼር ያድርጉ።