Purpose of stirrup
1. It increases the compressive strength of the column (column is compressive member)
2. It can improve the ductility of column
3. Stirrups prevent the buckling of amin reinforcement bar
4. At the time of concreting it prevents the movement of main reinforcement
5. Improve dowel action of column reinforcement
6. In beams stirrups used for lump sum same purpose as in column
7. To provide lateral confinement of longitudinal bars
8. It provide resistance against shear and torsion
9. To hold longitudinal bars during construction
10. It confine the concrete in the core , thus improving ductility and strength
11. It prevents premature buckling of individual bars
👉🏿SHARE IT WITH YOUR FRIENDS
@etconp
1. It increases the compressive strength of the column (column is compressive member)
2. It can improve the ductility of column
3. Stirrups prevent the buckling of amin reinforcement bar
4. At the time of concreting it prevents the movement of main reinforcement
5. Improve dowel action of column reinforcement
6. In beams stirrups used for lump sum same purpose as in column
7. To provide lateral confinement of longitudinal bars
8. It provide resistance against shear and torsion
9. To hold longitudinal bars during construction
10. It confine the concrete in the core , thus improving ductility and strength
11. It prevents premature buckling of individual bars
👉🏿SHARE IT WITH YOUR FRIENDS
@etconp
Forwarded from Ethio Construction Engineering (जॉर्डनो ג׳ורדנו ጆርዳኖ جوردانو จอร์แดโน่ JORDANO Ιορδάνοςஜார்டானோ)
🏫🗼🏟️ Unit Weight Of Building Materials:
Water- 1000 Kg/ m3
Bricks (broken) - 1420 Kg/ m3
Bricks(common) -1600 Kg/ m3
Cement(ordinary)- 1440 Kg/ m3
Cement (rapid hardening)- 1250 Kg/ m3
Cement Mortar - 2000 Kg/ m3 Cement Concrete (Plain) - 2400 Kg/ m3 Cement Concrete (Reinforced) -2500 Kg/ m3
Glass - 2500 Kg/ m3
Lime Concrete - 1900 Kg/ m3
Cement Plaster - 2000 Kg/ m3
Lime Plaster - 1700 Kg/ m3
Stones (Ballast) - 1720 Kg/ m3
Stones (Aggregates)- 1750 Kg/ m3
Stones (Basalt)- 2850 Kg/ m3
Stones (Granite) - 2450 Kg/ m3
Stones (Marble)- 2650 Kg/ m3
Timber (Oak, Sal) - 510 Kg/ m3 Timber (Mango) - 650 Kg/ m3
Timber (Teak)- 625 Kg/ m3
Coal- 600 Kg/ m3 Plastics- 1250 Kg/ m3
Oils- 800 Kg/ m3 Ashes- 650 Kg/ m3
Clinker- 750 Kg/ m3
Rubber- 1300 Kg/ m3
Slag- 1500 Kg/ m3
Clay Soil- 1900 Kg/ m3
Sand (dry) - 1540 to 1600 Kg/ m3
Sand (wet)- 1760 to 2000 Kg/ m3
Steel- 7850 Kg/ m3
Chalk- 2100 Kg/ m3
Bitumen- 1040 Kg/ m3
Water- 1000 Kg/ m3
Bricks (broken) - 1420 Kg/ m3
Bricks(common) -1600 Kg/ m3
Cement(ordinary)- 1440 Kg/ m3
Cement (rapid hardening)- 1250 Kg/ m3
Cement Mortar - 2000 Kg/ m3 Cement Concrete (Plain) - 2400 Kg/ m3 Cement Concrete (Reinforced) -2500 Kg/ m3
Glass - 2500 Kg/ m3
Lime Concrete - 1900 Kg/ m3
Cement Plaster - 2000 Kg/ m3
Lime Plaster - 1700 Kg/ m3
Stones (Ballast) - 1720 Kg/ m3
Stones (Aggregates)- 1750 Kg/ m3
Stones (Basalt)- 2850 Kg/ m3
Stones (Granite) - 2450 Kg/ m3
Stones (Marble)- 2650 Kg/ m3
Timber (Oak, Sal) - 510 Kg/ m3 Timber (Mango) - 650 Kg/ m3
Timber (Teak)- 625 Kg/ m3
Coal- 600 Kg/ m3 Plastics- 1250 Kg/ m3
Oils- 800 Kg/ m3 Ashes- 650 Kg/ m3
Clinker- 750 Kg/ m3
Rubber- 1300 Kg/ m3
Slag- 1500 Kg/ m3
Clay Soil- 1900 Kg/ m3
Sand (dry) - 1540 to 1600 Kg/ m3
Sand (wet)- 1760 to 2000 Kg/ m3
Steel- 7850 Kg/ m3
Chalk- 2100 Kg/ m3
Bitumen- 1040 Kg/ m3
Forwarded from Ethio Construction Engineering (Fîłmøñ Łûël)
👌Best Business Practices in Construction @ETCONP
.
#1
.
🙌Sustainable Construction Sustainable construction focuses to have social, economic and environmental performance of the industry.
🤞The practices focus on:
🎯 Getting maximum profit that help to recognise the business.
🎯 Deliver buildings with greater satisfaction, well-being and value
🎯 Respect and fair treatment of the employees. Considering health and safety factors, welfare conditions etc.
🎯 Protection and enhancement of the environment.
🎯 Waste reduction and pollution during the construction process
🎯 Energy efficient buildings by taking energy from renewable resources.
.
🙏Don't forget to share👇
.
http://t.me/COTMp
.
#1
.
🙌Sustainable Construction Sustainable construction focuses to have social, economic and environmental performance of the industry.
🤞The practices focus on:
🎯 Getting maximum profit that help to recognise the business.
🎯 Deliver buildings with greater satisfaction, well-being and value
🎯 Respect and fair treatment of the employees. Considering health and safety factors, welfare conditions etc.
🎯 Protection and enhancement of the environment.
🎯 Waste reduction and pollution during the construction process
🎯 Energy efficient buildings by taking energy from renewable resources.
.
🙏Don't forget to share👇
.
http://t.me/COTMp
Telegram
ETCONp Discussion
📩ለማነኛውም ሀሳብ እና አስተያየት @Philemona7
✌️ይህ የ @etconp መወያያ ግሩፓቹ ነው።
✋This is discussion group of @ETCONpWORK
.
🔖ማሳሰብያ ...
.
⚡️ግሩፑ ላይ ማነኛውም ከ ኮንስትራክሽን ጉዳዮች ውጪ መለጠፍ በፍፁም አይፈቀድም!
@ETCONpBOT ፃፉልን እናመሰግናለን🙏
✌️ይህ የ @etconp መወያያ ግሩፓቹ ነው።
✋This is discussion group of @ETCONpWORK
.
🔖ማሳሰብያ ...
.
⚡️ግሩፑ ላይ ማነኛውም ከ ኮንስትራክሽን ጉዳዮች ውጪ መለጠፍ በፍፁም አይፈቀድም!
@ETCONpBOT ፃፉልን እናመሰግናለን🙏
Forwarded from Ethio Construction Engineering (जॉर्डनो ג׳ורדנו ጆርዳኖ جوردانو จอร์แดโน่ JORDANO Ιορδάνοςஜார்டானோ)
Which brick 🧱 is stronger ?
Anonymous Quiz
14%
Stretcher bond
55%
English bond
19%
Flemish bond
13%
All of the above
Forwarded from Ethio Construction Engineering (जॉर्डनो ג׳ורדנו ጆርዳኖ جوردانو จอร์แดโน่ JORDANO Ιορδάνοςஜார்டானோ)
Forwarded from Ethio Construction Engineering (जॉर्डनो ג׳ורדנו ጆርዳኖ جوردانو จอร์แดโน่ JORDANO Ιορδάνοςஜார்டானோ)
Compression and tension forces on five different types of bridges
Truss bridge
Arch bridge
Suspension bridge
Cantilever bridge
Cable- stay bridge
ቀዩ መስመር ለ tension ነው
አረንጓዴው መስመር ለ compression ነው
@etconp
Truss bridge
Arch bridge
Suspension bridge
Cantilever bridge
Cable- stay bridge
ቀዩ መስመር ለ tension ነው
አረንጓዴው መስመር ለ compression ነው
@etconp
Forwarded from Ethio Construction Engineering (जॉर्डनो ג׳ורדנו ጆርዳኖ جوردانو จอร์แดโน่ JORDANO Ιορδάνοςஜார்டானோ) via @like
What machine is this ?
1. Hoist
2. Telehandler
3. Mobile telescopic crane
4. Tower crane
#equipment
@etconp
1. Hoist
2. Telehandler
3. Mobile telescopic crane
4. Tower crane
#equipment
@etconp
Forwarded from Ethio Construction Engineering (जॉर्डनो ג׳ורדנו ጆርዳኖ جوردانو จอร์แดโน่ JORDANO Ιορδάνοςஜார்டானோ)
This media is not supported in your browser
VIEW IN TELEGRAM
Almonte river viaduct
The construction process of almonte river viaduct.
The bridge 🌉 construction began in July 2011GC and completion was reached at the end of 2016GC
➡️Length:- 996meters
➡️Main span :- 384meters
➡️Arch concrete C80/95(m3):-9.748
➡️Rest of structure concrete(m3):-44.351
➡️Reinforcement steel B500(t):- 7.255
➡️post tension steel (t):- 541
➡️ Temporary cable- stays steel:- 857
➡️Temporary tower steel(t):- 894
➡️ Retaining ground anchors(m):- 6.03
➡️ cost:- 41 million euros 💶
Service date:- November 2016
Madrid, Spain 🇪🇸
#bridge #viaduct #highway #railway
#almonte
Source:- Adif
ፋይሉ 5.9MB ስለሆነ WiFi ቢጠቀሙ ይመረጣል
@etconp
The construction process of almonte river viaduct.
The bridge 🌉 construction began in July 2011GC and completion was reached at the end of 2016GC
➡️Length:- 996meters
➡️Main span :- 384meters
➡️Arch concrete C80/95(m3):-9.748
➡️Rest of structure concrete(m3):-44.351
➡️Reinforcement steel B500(t):- 7.255
➡️post tension steel (t):- 541
➡️ Temporary cable- stays steel:- 857
➡️Temporary tower steel(t):- 894
➡️ Retaining ground anchors(m):- 6.03
➡️ cost:- 41 million euros 💶
Service date:- November 2016
Madrid, Spain 🇪🇸
#bridge #viaduct #highway #railway
#almonte
Source:- Adif
ፋይሉ 5.9MB ስለሆነ WiFi ቢጠቀሙ ይመረጣል
@etconp
Forwarded from Ethio Construction Engineering (जॉर्डनो ג׳ורדנו ጆርዳኖ جوردانو จอร์แดโน่ JORDANO Ιορδάνοςஜார்டானோ)
This media is not supported in your browser
VIEW IN TELEGRAM
👉A turned mass damper (TMD) also known as a harmonic absorber or seismic damper is a device mounted in structures to reduce the amplitude of mechanical vibrations. Their application can prevent discomfort, damage or outright structural failure. They are frequently used in power transmission, automobiles and buildings @cotmp. #share
https://t.me/COTMp
https://t.me/COTMp
Which material do you prefer for construction 🚧?
1. Timber
2. Steel
3. Concrete
Share us why is your preference
@etconp
1. Timber
2. Steel
3. Concrete
Share us why is your preference
@etconp
Forwarded from Ethio Construction Engineering (जॉर्डनो ג׳ורדנו ጆርዳኖ جوردانو จอร์แดโน่ JORDANO Ιορδάνοςஜார்டானோ)
Compression and tension forces on five different types of bridges
Truss bridge
Arch bridge
Suspension bridge
Cantilever bridge
Cable- stay bridge
ቀዩ መስመር ለ tension ነው
አረንጓዴው መስመር ለ compression ነው
@etconp
Truss bridge
Arch bridge
Suspension bridge
Cantilever bridge
Cable- stay bridge
ቀዩ መስመር ለ tension ነው
አረንጓዴው መስመር ለ compression ነው
@etconp
Forwarded from Ethio Construction Engineering (जॉर्डनो ג׳ורדנו ጆርዳኖ جوردانو จอร์แดโน่ JORDANO Ιορδάνοςஜார்டானோ)
Maximum value of spacing for shear stirrups is________?
Anonymous Quiz
24%
450mm
52%
300mm
15%
350mm
9%
125mm
Forwarded from Ethio Construction Engineering (जॉर्डनो ג׳ורדנו ጆርዳኖ جوردانو จอร์แดโน่ JORDANO Ιορδάνοςஜார்டானோ) via @like
A pile of 0.5m diameter of length 10m is embedded in deposit of clay. The in- drained strength parameters of clay are cohesion =60KN/m2 and angle of internal friction =0. The skin friction capacity (kN) of pile for an adhesion factor of 0.6, is _?
1. 671
2. 565
3. 283
4. 106
#foundationengineering
#soil
#pilefoundation
@etconp
1. 671
2. 565
3. 283
4. 106
#foundationengineering
#soil
#pilefoundation
@etconp
Ethio Construction Engineering
A pile of 0.5m diameter of length 10m is embedded in deposit of clay. The in- drained strength parameters of clay are cohesion =60KN/m2 and angle of internal friction =0. The skin friction capacity (kN) of pile for an adhesion factor of 0.6, is _? 1. 671…
👆🏾👆🏾𝕊𝕠𝕝𝕦𝕥𝕚𝕠𝕟 𝕗𝕠𝕣 𝕥𝕙𝕚𝕤 𝕢𝕦𝕖𝕤𝕥𝕚𝕠𝕟 👆🏾
Given
➪ Cohesion (C) = 60KN/M²
➪ Diameter of the pile(D) = 0.5 meters
➪ angle of internal friction( Φ) = 0
➪ Length of the pile(L) = 10 meters
➪ Adhesion factor (α) = 0.6
Required
Skin friction capacity of pile (q𝑓𝑠)=?
Solution
✔︎ Q𝑓𝑠 = π x C X D x L x α
👉🏿 π=3.14
Q𝑓𝑠 = 3.14 x 0.6 x 10 x 0.5 x 60
Q𝑓𝑠= 565.2 KN
#share
# watermark
@etconp
Given
➪ Cohesion (C) = 60KN/M²
➪ Diameter of the pile(D) = 0.5 meters
➪ angle of internal friction( Φ) = 0
➪ Length of the pile(L) = 10 meters
➪ Adhesion factor (α) = 0.6
Required
Skin friction capacity of pile (q𝑓𝑠)=?
Solution
✔︎ Q𝑓𝑠 = π x C X D x L x α
👉🏿 π=3.14
Q𝑓𝑠 = 3.14 x 0.6 x 10 x 0.5 x 60
Q𝑓𝑠= 565.2 KN
#share
# watermark
@etconp
Telegram
Ethio Construction Engineering
🔨 World Construction Engineering
Latest updates, tips, and tutorials on building, civil engineering, and construction in World.
Learn, build, and grow with us!
📨 @Philemona7 Or @ETCONpBOT
For Ad:- https://telega.io/c/etconp
Latest updates, tips, and tutorials on building, civil engineering, and construction in World.
Learn, build, and grow with us!
📨 @Philemona7 Or @ETCONpBOT
For Ad:- https://telega.io/c/etconp
Forwarded from Ethio Construction Engineering (जॉर्डनो ג׳ורדנו ጆርዳኖ جوردانو จอร์แดโน่ JORDANO Ιορδάνοςஜார்டானோ)
This media is not supported in your browser
VIEW IN TELEGRAM
Construction of beam , column , slab, and stair
የ beam , column, slab እና ደረጃ አሰራር animation እንካችሁ ብለናል።
ፋይሉ 4.9MB ስለሆነ WiFi ብትጠቀሙ ይመረጣል።
#SHARE_IT_WITH_FRIENDS
@etconp
የ beam , column, slab እና ደረጃ አሰራር animation እንካችሁ ብለናል።
ፋይሉ 4.9MB ስለሆነ WiFi ብትጠቀሙ ይመረጣል።
#SHARE_IT_WITH_FRIENDS
@etconp
Forwarded from Ethio Construction Engineering (Yonathan)
This media is not supported in your browser
VIEW IN TELEGRAM
Soil nailing uses grouted, tension-resisting steel elements (nails) to reinforce in situ soils and creating a gravity retaining wall for permanent or temporary excavation support.
Common uses
- Stabilize slopes and landslides
- Support excavations
- Repair existing retaining walls
Process:-
Soil nail walls are generally constructed from the top down. Typically, soil is excavated in three to six feet deep stages. After each excavation stage, near-horizontal holes are drilled into the exposed face at typically three to six foot centres. Tension-resisting steel bars are inserted into the holes and grouted in place. A drainage system is installed on the exposed face, followed by the application of reinforced shotcrete wall facing. Precast face panels can also be used. Bearing plates are then fixed to the heads of the soil nails. This installation process is repeated until the design wall depth is reached. The finished soil nails then produce a zone of reinforced ground.
#geotechnical #soilnailing
@etconp
Common uses
- Stabilize slopes and landslides
- Support excavations
- Repair existing retaining walls
Process:-
Soil nail walls are generally constructed from the top down. Typically, soil is excavated in three to six feet deep stages. After each excavation stage, near-horizontal holes are drilled into the exposed face at typically three to six foot centres. Tension-resisting steel bars are inserted into the holes and grouted in place. A drainage system is installed on the exposed face, followed by the application of reinforced shotcrete wall facing. Precast face panels can also be used. Bearing plates are then fixed to the heads of the soil nails. This installation process is repeated until the design wall depth is reached. The finished soil nails then produce a zone of reinforced ground.
#geotechnical #soilnailing
@etconp
👍2