Forwarded from Ethio Construction Engineering (Fîłmøñ Łûël)
Forwarded from Ethio Construction Engineering (Fîłmøñ Łûël)
👉10 key terms of Project management and schedule
you should know. @COTMp 👆
.
1. WBS (Work Breakdown Structure): Is hierarchical that breaks down the work into manageable clods so that each level of WBS could be easily understood by the project team.
.
2. Milestone:
These are the significant points in time or an event
that mark important moments during the project.
These are mainly used for
● Starting phase
● Ending phase
● Fixed dates on plan
.
3. Baseline:
Is used to measure the performance of the project.
There are three baselines in project management.
These are –
● Schedule baseline
● Cost baseline
● Scope baseline
4. Gantt Chart:
Is a bar chart that displays the scheduled
.
information graphically.
5. Critical Path Method (CPM) Critical Path Method (CPM) is a step by step approach in which one can analyze critical and non- critical tasks.
6. Dummy Activity:
dummy activity is a simulated activity of sorts, one that is of a zero duration.
.
7. Float:
Float, also called slack, is the amount of time a
task can slip before it bumps into another task.
8. Chart Dependencies:
.
the predecessor is the first task; it controls the start
or end date for all related successor tasks. The
successor, by contrast, is the task whose start or
end date is controlled by the predecessor.
.
9. Types of relationship:
■ Finish to Start: Predecessor must finish before Successor can start.
■ Start to Start:Predecessor must start before Successor can start.
■ Finish to Finish: Predecessor must finish before Successor can finish.
■ Start to Finish: Predecessor must start before Successor can finish.
.
10. Lead time and Lag time: Lead time causes the successor task to begin
before its predecessor task concludes.
Lag time causes the successor task to begin some time after its predecessor task concludes.
.
👇👇👇👇👇
Join for more updates via the link below;
t.me/COTMp
👆👆👆👆👆
⚡ አሁኑኑ Join በማረግ እና ለጓደኛዎ እና ለሚያቁት ሁሉ ሼር ያድርጉ።
you should know. @COTMp 👆
.
1. WBS (Work Breakdown Structure): Is hierarchical that breaks down the work into manageable clods so that each level of WBS could be easily understood by the project team.
.
2. Milestone:
These are the significant points in time or an event
that mark important moments during the project.
These are mainly used for
● Starting phase
● Ending phase
● Fixed dates on plan
.
3. Baseline:
Is used to measure the performance of the project.
There are three baselines in project management.
These are –
● Schedule baseline
● Cost baseline
● Scope baseline
4. Gantt Chart:
Is a bar chart that displays the scheduled
.
information graphically.
5. Critical Path Method (CPM) Critical Path Method (CPM) is a step by step approach in which one can analyze critical and non- critical tasks.
6. Dummy Activity:
dummy activity is a simulated activity of sorts, one that is of a zero duration.
.
7. Float:
Float, also called slack, is the amount of time a
task can slip before it bumps into another task.
8. Chart Dependencies:
.
the predecessor is the first task; it controls the start
or end date for all related successor tasks. The
successor, by contrast, is the task whose start or
end date is controlled by the predecessor.
.
9. Types of relationship:
■ Finish to Start: Predecessor must finish before Successor can start.
■ Start to Start:Predecessor must start before Successor can start.
■ Finish to Finish: Predecessor must finish before Successor can finish.
■ Start to Finish: Predecessor must start before Successor can finish.
.
10. Lead time and Lag time: Lead time causes the successor task to begin
before its predecessor task concludes.
Lag time causes the successor task to begin some time after its predecessor task concludes.
.
👇👇👇👇👇
Join for more updates via the link below;
t.me/COTMp
👆👆👆👆👆
⚡ አሁኑኑ Join በማረግ እና ለጓደኛዎ እና ለሚያቁት ሁሉ ሼር ያድርጉ።
Telegram
ETCONp Discussion
📩ለማነኛውም ሀሳብ እና አስተያየት @Philemona7
✌️ይህ የ @etconp መወያያ ግሩፓቹ ነው።
✋This is discussion group of @ETCONpWORK
.
🔖ማሳሰብያ ...
.
⚡️ግሩፑ ላይ ማነኛውም ከ ኮንስትራክሽን ጉዳዮች ውጪ መለጠፍ በፍፁም አይፈቀድም!
@ETCONpBOT ፃፉልን እናመሰግናለን🙏
✌️ይህ የ @etconp መወያያ ግሩፓቹ ነው።
✋This is discussion group of @ETCONpWORK
.
🔖ማሳሰብያ ...
.
⚡️ግሩፑ ላይ ማነኛውም ከ ኮንስትራክሽን ጉዳዮች ውጪ መለጠፍ በፍፁም አይፈቀድም!
@ETCONpBOT ፃፉልን እናመሰግናለን🙏
Forwarded from Ethio Construction Engineering (Fîłmøñ Łûël)
👉Important points for a Construction Site Engineer @COTMp
.
▶A site engineer has to perform a lot of activities on the site. His/her role involves a lot of responsibility which includes giving sufficient advice and supervision when there are any technical issues, or for proper management and for the preparation of day to day reports of the construction works.
*There are some works which are recurring and hence a few tips might be useful for a civil engineer if
they are remembered. They help in faster
*calculations as well as to address problems at
the site.
⏩Points to Remember for Civil Site Engineer 👇
:
▶36mm is the maximum diameter of the bars used for lapping.
*Bars having more than this diameter are not allowed.
▶Maximum chair spacing is 1m and the minimum diameter used for these bars is 12mm.
▶Minimum diameter used for dowels bars is
12mm.
▶Longitudinal reinforcement should not be less than 0.8% of gross area of cross section
and not be more than 6% of the same.
▶Minimum number of bars used for square
columns is 4 and that of a circle is 6.
▶The main bars used in the slabs should not
be less than 8mm when HYSD bars are used
and 10mm when plain bars are used.
▶The distribution bars in slabs should not less
than 8mm and not more than 1/8 of slab
thickness.
▶Minimum thickness of slab is 125mm.
▶Maximum free fall of concrete is allowed to
1.50m.
▶Lap slices not be employed for bars greater
than 36 mm.
▶PH value of the water should not be less
than 6.
▶Compressive strength of Bricks is 3.5 N/
mm
▶Water absorption of bricks should not be
more than 15 %.
▶ Binding wire required in steel reinforcement
is 8 kg per MT.
.
👉 Density of Materials
*Bricks : 1600-1920kg/m
*Concrete block:1920kg/m
*Reinforced concrete :2310-2700kg/m
⏩De shuttering time of different RCC Members
*For columns : 16-24 hrs.
*Soffit formwork to slabs : 3days
*Soffit to beams props : 7days
*Beams spanning upto 4.5m : 7days
.
👇👇👇👇👇
Join for more updates via the link below;
t.me/COTMp
👆👆👆👆👆
⚡ አሁኑኑ Join በማረግ እና ለጓደኛዎ እና ለሚያቁት ሁሉ ሼር ያድርጉ። እናመሰግናለን።
.
▶A site engineer has to perform a lot of activities on the site. His/her role involves a lot of responsibility which includes giving sufficient advice and supervision when there are any technical issues, or for proper management and for the preparation of day to day reports of the construction works.
*There are some works which are recurring and hence a few tips might be useful for a civil engineer if
they are remembered. They help in faster
*calculations as well as to address problems at
the site.
⏩Points to Remember for Civil Site Engineer 👇
:
▶36mm is the maximum diameter of the bars used for lapping.
*Bars having more than this diameter are not allowed.
▶Maximum chair spacing is 1m and the minimum diameter used for these bars is 12mm.
▶Minimum diameter used for dowels bars is
12mm.
▶Longitudinal reinforcement should not be less than 0.8% of gross area of cross section
and not be more than 6% of the same.
▶Minimum number of bars used for square
columns is 4 and that of a circle is 6.
▶The main bars used in the slabs should not
be less than 8mm when HYSD bars are used
and 10mm when plain bars are used.
▶The distribution bars in slabs should not less
than 8mm and not more than 1/8 of slab
thickness.
▶Minimum thickness of slab is 125mm.
▶Maximum free fall of concrete is allowed to
1.50m.
▶Lap slices not be employed for bars greater
than 36 mm.
▶PH value of the water should not be less
than 6.
▶Compressive strength of Bricks is 3.5 N/
mm
▶Water absorption of bricks should not be
more than 15 %.
▶ Binding wire required in steel reinforcement
is 8 kg per MT.
.
👉 Density of Materials
*Bricks : 1600-1920kg/m
*Concrete block:1920kg/m
*Reinforced concrete :2310-2700kg/m
⏩De shuttering time of different RCC Members
*For columns : 16-24 hrs.
*Soffit formwork to slabs : 3days
*Soffit to beams props : 7days
*Beams spanning upto 4.5m : 7days
.
👇👇👇👇👇
Join for more updates via the link below;
t.me/COTMp
👆👆👆👆👆
⚡ አሁኑኑ Join በማረግ እና ለጓደኛዎ እና ለሚያቁት ሁሉ ሼር ያድርጉ። እናመሰግናለን።
Telegram
ETCONp Discussion
📩ለማነኛውም ሀሳብ እና አስተያየት @Philemona7
✌️ይህ የ @etconp መወያያ ግሩፓቹ ነው።
✋This is discussion group of @ETCONpWORK
.
🔖ማሳሰብያ ...
.
⚡️ግሩፑ ላይ ማነኛውም ከ ኮንስትራክሽን ጉዳዮች ውጪ መለጠፍ በፍፁም አይፈቀድም!
@ETCONpBOT ፃፉልን እናመሰግናለን🙏
✌️ይህ የ @etconp መወያያ ግሩፓቹ ነው።
✋This is discussion group of @ETCONpWORK
.
🔖ማሳሰብያ ...
.
⚡️ግሩፑ ላይ ማነኛውም ከ ኮንስትራክሽን ጉዳዮች ውጪ መለጠፍ በፍፁም አይፈቀድም!
@ETCONpBOT ፃፉልን እናመሰግናለን🙏
👍1
Forwarded from Ethio Construction Engineering (Ankit)
Hydrology
instant view ማለት “ፈጣን እይታ “ ማለት ነው instant view የሚለውን ስትጫኑት በ microsecond ልዩነት ወደ page’ሁ ይወስዳችዋል data ቢያልቅባችውም አንዴ ከከፈታችሁት data አጥፈታችው ደጋግማችው ማየት ትችላላችሁ ወደሌላ website አይወስዳችሁም load’ም አያደርግም በmicrosecond ልዩነት ወደሌላ page ይወስዳችኋል።
https://telegra.ph/HHydrlogy-04-27
instant view ማለት “ፈጣን እይታ “ ማለት ነው instant view የሚለውን ስትጫኑት በ microsecond ልዩነት ወደ page’ሁ ይወስዳችዋል data ቢያልቅባችውም አንዴ ከከፈታችሁት data አጥፈታችው ደጋግማችው ማየት ትችላላችሁ ወደሌላ website አይወስዳችሁም load’ም አያደርግም በmicrosecond ልዩነት ወደሌላ page ይወስዳችኋል።
https://telegra.ph/HHydrlogy-04-27
Telegraph
HHydrlogy
Maximum flood estimation ♦️ Methods of estimate floods peaks 1. Rational Method 👉 Q = AIR/360 2. Empirical Formulae A. Dickens formula : 👉 Used in central and Northern parts of the country 👉 Q = Cd.A^3/4 B. Ryre's formula 👉 Used in Southern States of the…
As you know to determine weight of the bar we use two formulas
1. W= D² x Length of the bar
162
2. W = D² X length of the bar
52.9
When do we use the first formula when do we use the second formula ?
Share this question with your friends ?
@etconp
1. W= D² x Length of the bar
162
2. W = D² X length of the bar
52.9
When do we use the first formula when do we use the second formula ?
Share this question with your friends ?
@etconp
Telegram
Ethio Construction Engineering
🔨 World Construction Engineering
Latest updates, tips, and tutorials on building, civil engineering, and construction in World.
Learn, build, and grow with us!
📨 @Philemona7 Or @ETCONpBOT
For Ad:- https://telega.io/c/etconp
Latest updates, tips, and tutorials on building, civil engineering, and construction in World.
Learn, build, and grow with us!
📨 @Philemona7 Or @ETCONpBOT
For Ad:- https://telega.io/c/etconp
Forwarded from Ethio Construction Engineering (Fîłmøñ Łûël)
👉ስለ ኦፒሲ እና ፒፒሲ የ ሲሚንቶ ኣይነቶች ትንሽ እንንገራቹ @COTMp
.
⏩OPC— Ordinary Portland cement
⏩PPC —Portland pozzollana cement
➡በሀገራችን ኢትዮጲያ በስፋት ህንፃ እና መሰረተ ልማት ግንባታ
ላይ በስፋት እየተጠቀምንባቸው የምንገኝባቸው የሲሚንቶ አይነቶች ናቸው።
የሁለቱንም የሲሚንቶ አይነቶች ጥቅም አንድነት እና ልዩነት ከዚህ በታች አጠር አድርገን እናቀርባለን።
▶ኦፒሲ/OPC/ በምጣነ ስርገት( Permeability) ከ ፒፒሲ/ PPC/ ጋር ሲነፃፀር ከፍ ያለ ነው።
ውሃ ዘልነት /Heat of Hydration/ የኦፐሲ ከፍተኛ በመሆኑ ከፒፒሲ በተሻለ መልኩ ቶሎ የሚፈለገውን ጥረንካሬ ቀድሞ ያገኛል። በተቃራኒው ደግሞ ፒፒሲ heat of hydration ቀርፋፋ በመሆኑ ለመርጋት/curing period/ ተጨማሪ ቀናት ይወስዳል
ማለት ነው።
👉በጥንካሬ ደረጃ /Grade of Strength / ኦፒሲ 42.5R grade cement ሲሆን ፒፒሲ ደግሞ 32.5R Grade Cement ነው።
➡Note: Number represent compressive strength of
cement in MPa.
.
⏩OPC— Ordinary Portland cement
⏩PPC —Portland pozzollana cement
➡በሀገራችን ኢትዮጲያ በስፋት ህንፃ እና መሰረተ ልማት ግንባታ
ላይ በስፋት እየተጠቀምንባቸው የምንገኝባቸው የሲሚንቶ አይነቶች ናቸው።
የሁለቱንም የሲሚንቶ አይነቶች ጥቅም አንድነት እና ልዩነት ከዚህ በታች አጠር አድርገን እናቀርባለን።
▶ኦፒሲ/OPC/ በምጣነ ስርገት( Permeability) ከ ፒፒሲ/ PPC/ ጋር ሲነፃፀር ከፍ ያለ ነው።
ውሃ ዘልነት /Heat of Hydration/ የኦፐሲ ከፍተኛ በመሆኑ ከፒፒሲ በተሻለ መልኩ ቶሎ የሚፈለገውን ጥረንካሬ ቀድሞ ያገኛል። በተቃራኒው ደግሞ ፒፒሲ heat of hydration ቀርፋፋ በመሆኑ ለመርጋት/curing period/ ተጨማሪ ቀናት ይወስዳል
ማለት ነው።
👉በጥንካሬ ደረጃ /Grade of Strength / ኦፒሲ 42.5R grade cement ሲሆን ፒፒሲ ደግሞ 32.5R Grade Cement ነው።
➡Note: Number represent compressive strength of
cement in MPa.
Forwarded from Ethio Construction Engineering (Fîłmøñ Łûël)
Forwarded from Ethio Construction Engineering (Fîłmøñ Łûël)
👉ስለ መሰንጠቅ (cracking ) @COTMp ...
.
⏩ብዙ የኮንስትራክሽን ባለሞያዎች መሰንጠቅ በMix design ትክክል አለመሆን ብቻ የሚመጣ ይመስላቸዋል ነገር ግን ለመሰንጠቅ (cracking ) ምክንያት የሚሆኑ መንስኤዎችን ከዚህ በታች እንዲህ ዳስሰናል👇 ⚡መልካም ንባብ!
.
[፩] - አነስተኛ ጥራት ያላቸውን ቁሶች የምንጠቀም ከሆነ
.
*አነስተኛ ጥራት ያላቸውን ቁሶች የምንጠቀም ከሆነ መሰንጠቅ (cracking ) ይፈጠራል ስለዚህ የምንጠቀማቸውን ለኮንክሪት ግብዓት የሚሆኑ ቁሶችን (ሲሚንቶ፣ አሸዋ፣ ኮረኮንች) ጥራት መፈተሽ አለብን ኮንክሪቱ የብረት መዋቅር (reinforcement ) ያለው ከሆነ የብረቱን ጥራት መገምገም አለብን።
.
[፪] - መኮማተር (Shrinkage )
.
*ኮንክሪቱን በምንደባልቅበት እና ውሃ በምናጠጣበት ግዜ (Curing ) ተገቢውን ጥንቃቄ ካልወሰድን መኮማተር (shrinkage) መሰንጠቅን(cracking) ያስከትላል ።
መኮማተር (shrinkage) ለትልቅ የኮንክሪት ጥንካሬ በጣም አስፈላጊ ነው አስፈላጊውን የውሃ-ሲሚንቶ መመዛዘን (water cement ratio) ካልተጠቀምን በመኮማተር አማካኝነት መሰንጠቅ ሊፈጠር ይችላል ።
.
[፫] - ጥራት ያለው Aggregate የማንጠቀም ከሆነ
.
*Aggregate የኮንክሪትን አጠቃላይ ጥንካሬ ይወስንልናል ጥራቱ ጥሩ ያልሆነ Aggregate የምንጠቀም ከሆነ ከሲሚንቶ ጋር ተፈላጊውን ጥምረት (bond) ስለማይፈጥር ግንባታችን ሊሰነጠቅ ይችላል።
.
[፬] - መዋቅራችን ከአቅም በላይ የሆነ ክብደት ሲያስተናግድ
.
*ግንባታው / መዋቅሩ ተገቢውን ጥንካሬ ሳያገኝ በፊት ለትልቅ ክብደት የሚጋለጥ ከሆነ መሰንጠቅ ይከሰታል። በተጨማሪም መቀሰቻዎችን እና ቅስቱን (formwork ) ያለጊዜው የሚነሳ ከሆነም ግንባታችንን ለስንጣቆ ያጋልጠዋል።
.
[፭] - በትክክል ውሃ እንዲጠጣ የማይደረግ ከሆነ (improper curing )
.
*ይህ በአገራችን ከሚስተዋሉ ለመሰንጠቅ ከሚዳርጉ ምክንያቶች ቀዳሚው ነው - ውሃ በትክክል አለማጠጣት።
ኮንክሪት እንደተገነባ በተገቢው ጊዜ እና መጠን ውሃ ሊጠጣት አለበት ።
«ወንድና ሲሚንቶ ካልጠጣ ይሰነጠቃል» አይደል ሚሉት ሰካራም ወንዶች😂
.
[፮] - የውጥረት ስርጭት (stress distribution ) አለመመጣጠን
.
*በጣም ትልቅ የሆነ የብረት መዋቅርን Mix ratio ትንሽ በሆነ ኮንክሪት የሙሌት ስራ ስንሰራ በብረቱ እና በኮንክሪቱ መካከል ያለ የውጥረት ስርጭት (stress distribution ) non linear ይሆናል ይህ ደግሞ መሰንጠቅን ያስከትላል።
.
[፯] - በሳይት ላይ የሙሌት (casting ) ስራ ሲሰራ ተገቢ ጥንቃቄ ካልተደረገ እና ለስራው ተገቢ የሆነ ባለሞያ (የቀን ሰራተኛን ጨምሮ) ካልተመደበ መሰንጠቅ (cracking) በሚሰራው ኮንክሪት ላይ መፈጠሩ አይቀርም።
.
ለሁሉም እንዲዳረስ ፖስቶቹን SHARE አድርጉልን።
👇👇👇👇👇
Join for more updates via the link below; እናመሰግናለን
t.me/COTMp
👆👆👆👆👆
.
⏩ብዙ የኮንስትራክሽን ባለሞያዎች መሰንጠቅ በMix design ትክክል አለመሆን ብቻ የሚመጣ ይመስላቸዋል ነገር ግን ለመሰንጠቅ (cracking ) ምክንያት የሚሆኑ መንስኤዎችን ከዚህ በታች እንዲህ ዳስሰናል👇 ⚡መልካም ንባብ!
.
[፩] - አነስተኛ ጥራት ያላቸውን ቁሶች የምንጠቀም ከሆነ
.
*አነስተኛ ጥራት ያላቸውን ቁሶች የምንጠቀም ከሆነ መሰንጠቅ (cracking ) ይፈጠራል ስለዚህ የምንጠቀማቸውን ለኮንክሪት ግብዓት የሚሆኑ ቁሶችን (ሲሚንቶ፣ አሸዋ፣ ኮረኮንች) ጥራት መፈተሽ አለብን ኮንክሪቱ የብረት መዋቅር (reinforcement ) ያለው ከሆነ የብረቱን ጥራት መገምገም አለብን።
.
[፪] - መኮማተር (Shrinkage )
.
*ኮንክሪቱን በምንደባልቅበት እና ውሃ በምናጠጣበት ግዜ (Curing ) ተገቢውን ጥንቃቄ ካልወሰድን መኮማተር (shrinkage) መሰንጠቅን(cracking) ያስከትላል ።
መኮማተር (shrinkage) ለትልቅ የኮንክሪት ጥንካሬ በጣም አስፈላጊ ነው አስፈላጊውን የውሃ-ሲሚንቶ መመዛዘን (water cement ratio) ካልተጠቀምን በመኮማተር አማካኝነት መሰንጠቅ ሊፈጠር ይችላል ።
.
[፫] - ጥራት ያለው Aggregate የማንጠቀም ከሆነ
.
*Aggregate የኮንክሪትን አጠቃላይ ጥንካሬ ይወስንልናል ጥራቱ ጥሩ ያልሆነ Aggregate የምንጠቀም ከሆነ ከሲሚንቶ ጋር ተፈላጊውን ጥምረት (bond) ስለማይፈጥር ግንባታችን ሊሰነጠቅ ይችላል።
.
[፬] - መዋቅራችን ከአቅም በላይ የሆነ ክብደት ሲያስተናግድ
.
*ግንባታው / መዋቅሩ ተገቢውን ጥንካሬ ሳያገኝ በፊት ለትልቅ ክብደት የሚጋለጥ ከሆነ መሰንጠቅ ይከሰታል። በተጨማሪም መቀሰቻዎችን እና ቅስቱን (formwork ) ያለጊዜው የሚነሳ ከሆነም ግንባታችንን ለስንጣቆ ያጋልጠዋል።
.
[፭] - በትክክል ውሃ እንዲጠጣ የማይደረግ ከሆነ (improper curing )
.
*ይህ በአገራችን ከሚስተዋሉ ለመሰንጠቅ ከሚዳርጉ ምክንያቶች ቀዳሚው ነው - ውሃ በትክክል አለማጠጣት።
ኮንክሪት እንደተገነባ በተገቢው ጊዜ እና መጠን ውሃ ሊጠጣት አለበት ።
«ወንድና ሲሚንቶ ካልጠጣ ይሰነጠቃል» አይደል ሚሉት ሰካራም ወንዶች😂
.
[፮] - የውጥረት ስርጭት (stress distribution ) አለመመጣጠን
.
*በጣም ትልቅ የሆነ የብረት መዋቅርን Mix ratio ትንሽ በሆነ ኮንክሪት የሙሌት ስራ ስንሰራ በብረቱ እና በኮንክሪቱ መካከል ያለ የውጥረት ስርጭት (stress distribution ) non linear ይሆናል ይህ ደግሞ መሰንጠቅን ያስከትላል።
.
[፯] - በሳይት ላይ የሙሌት (casting ) ስራ ሲሰራ ተገቢ ጥንቃቄ ካልተደረገ እና ለስራው ተገቢ የሆነ ባለሞያ (የቀን ሰራተኛን ጨምሮ) ካልተመደበ መሰንጠቅ (cracking) በሚሰራው ኮንክሪት ላይ መፈጠሩ አይቀርም።
.
ለሁሉም እንዲዳረስ ፖስቶቹን SHARE አድርጉልን።
👇👇👇👇👇
Join for more updates via the link below; እናመሰግናለን
t.me/COTMp
👆👆👆👆👆
Telegram
ETCONp Discussion
📩ለማነኛውም ሀሳብ እና አስተያየት @Philemona7
✌️ይህ የ @etconp መወያያ ግሩፓቹ ነው።
✋This is discussion group of @ETCONpWORK
.
🔖ማሳሰብያ ...
.
⚡️ግሩፑ ላይ ማነኛውም ከ ኮንስትራክሽን ጉዳዮች ውጪ መለጠፍ በፍፁም አይፈቀድም!
@ETCONpBOT ፃፉልን እናመሰግናለን🙏
✌️ይህ የ @etconp መወያያ ግሩፓቹ ነው።
✋This is discussion group of @ETCONpWORK
.
🔖ማሳሰብያ ...
.
⚡️ግሩፑ ላይ ማነኛውም ከ ኮንስትራክሽን ጉዳዮች ውጪ መለጠፍ በፍፁም አይፈቀድም!
@ETCONpBOT ፃፉልን እናመሰግናለን🙏
👍1
ከ10 አመት በላይ በስራ ላይ...
ኢትዮጵያ ውስጥ በየቀኑ የሚወጡ ጨረታዎችን ለመከታተል ሐበሻ ቴንደር ላይ ይመዝገቡ። ለመመዝገብ በonline ወይም እኛ እንድንመዘግቦት የእርስዎን ስም; ስልክ ቁጥርዎን እንዲሁም email ካለዎት በSMS ይላኩልን። ለተጨማሪ መረጃ 0988199649 / 0960160215 ይደውሉ ።
ሐበሻ ቴንደር የኢትዮጵያ ጨረታዎች የመረጃ ምንጭ
ኢትዮጵያ ውስጥ በየቀኑ የሚወጡ ጨረታዎችን ለመከታተል ሐበሻ ቴንደር ላይ ይመዝገቡ። ለመመዝገብ በonline ወይም እኛ እንድንመዘግቦት የእርስዎን ስም; ስልክ ቁጥርዎን እንዲሁም email ካለዎት በSMS ይላኩልን። ለተጨማሪ መረጃ 0988199649 / 0960160215 ይደውሉ ።
ሐበሻ ቴንደር የኢትዮጵያ ጨረታዎች የመረጃ ምንጭ
Forwarded from Ethio Construction Engineering
👉የቅየሳ መሳሪያ/Surveying Equipment/ @COTMp
.
⏩ቅየሳ/surveying/ በተፈጥሮ ሳይንስ የሚመደብ የስራ ሙያ
ሲሆን ሁለት የተለያዪ መገኛዎችን ርቀት/distance/፣ ከፍታ
ልኬት/Elevation/ እና በሁለቱ መካከል የሚገኘውን ማዕዘን/
Angle/ ለማውጣት የምንጠቀምበት ዘዴ ነው።
.
➡ሁለት አይነት የቅየሳ መሳሪያ ይገኛሉ
1. ቴዶላይት/Thedolite/
2. ቶታል ስቴሽን/Total Station/
➡ቶታል ስቴሽን ጂፒስ፣ጨረር እና የከፍታ መለኪያ ሴንሰር
በመጠቀም ትክክለኛ የከፍታ ልዪነት/Elevation difference እና ርቀትን ለመለካት ይጠቅመናል።
➡ቴዶላይት ደግሞ በሁለት ነጥቦች መካከል ያለውን የከፍታ
ልዪነት ለመለካት ሲያገለግል በመካከላቸው ያለውን ርቀት ግን
መለካት አይችልም።
.
🚩ለሁሉም እንዲዳረስ ፖስቶቹን SHARE አድርጉልን።
👇👇👇👇👇
Join for more updates via the link below;
t.me/COTMp
👆👆👆👆👆
.
⏩ቅየሳ/surveying/ በተፈጥሮ ሳይንስ የሚመደብ የስራ ሙያ
ሲሆን ሁለት የተለያዪ መገኛዎችን ርቀት/distance/፣ ከፍታ
ልኬት/Elevation/ እና በሁለቱ መካከል የሚገኘውን ማዕዘን/
Angle/ ለማውጣት የምንጠቀምበት ዘዴ ነው።
.
➡ሁለት አይነት የቅየሳ መሳሪያ ይገኛሉ
1. ቴዶላይት/Thedolite/
2. ቶታል ስቴሽን/Total Station/
➡ቶታል ስቴሽን ጂፒስ፣ጨረር እና የከፍታ መለኪያ ሴንሰር
በመጠቀም ትክክለኛ የከፍታ ልዪነት/Elevation difference እና ርቀትን ለመለካት ይጠቅመናል።
➡ቴዶላይት ደግሞ በሁለት ነጥቦች መካከል ያለውን የከፍታ
ልዪነት ለመለካት ሲያገለግል በመካከላቸው ያለውን ርቀት ግን
መለካት አይችልም።
.
🚩ለሁሉም እንዲዳረስ ፖስቶቹን SHARE አድርጉልን።
👇👇👇👇👇
Join for more updates via the link below;
t.me/COTMp
👆👆👆👆👆
Forwarded from Ethio Construction Engineering
👉ለአካል ጉዳተኞች መደረግ የሚገባቸው ዝግጅቶች እና የሰው ማመላለሻ አሳነሰር /Lift የሀገራችን ህግ ምን ይላል? @COTMp
.
▶የሚኒስትሮች ምክር ቤት የኢትዮጵያ ፌደራላዊ ዲሞክራሲያዊ ሪፐብሊክ አስፈፃሚ አካላትን ሥልጣንና ተግባር በመወሰን በወጣው አዋጅ ቁጥር ፮፻፺፩//፪ሺ፫ አንቀጽ 5 እና በኢትዮጵያ ሕንጻ አዋጅ ቁጥር 6፻፳4/፪ሺ፫ ባወጣው አዋጅ መሰረት የህናንፃ ግንባታ ላይ ለሚተከሉ የሰው ማመላለሻ አሳንሰሮች እና ለአካል ጉዳተኞች ታስቦ የሚዘጋጁ ዝግጅቶች በሚመለከት የወጣ አዋጅ
ቢኖርም አሁንም ድረስ በቁጥጥሩ ረገድ ተፈፃሚ ሲሆን አይስተዋልም።
.
⚡ለሁሉም እንዲዳረስ ፖስቶቹን SHARE አድርጉልን።
.
▶የሚኒስትሮች ምክር ቤት የኢትዮጵያ ፌደራላዊ ዲሞክራሲያዊ ሪፐብሊክ አስፈፃሚ አካላትን ሥልጣንና ተግባር በመወሰን በወጣው አዋጅ ቁጥር ፮፻፺፩//፪ሺ፫ አንቀጽ 5 እና በኢትዮጵያ ሕንጻ አዋጅ ቁጥር 6፻፳4/፪ሺ፫ ባወጣው አዋጅ መሰረት የህናንፃ ግንባታ ላይ ለሚተከሉ የሰው ማመላለሻ አሳንሰሮች እና ለአካል ጉዳተኞች ታስቦ የሚዘጋጁ ዝግጅቶች በሚመለከት የወጣ አዋጅ
ቢኖርም አሁንም ድረስ በቁጥጥሩ ረገድ ተፈፃሚ ሲሆን አይስተዋልም።
.
⚡ለሁሉም እንዲዳረስ ፖስቶቹን SHARE አድርጉልን።
Forwarded from Ethio Construction Engineering
👉የጠቅላላ ሁኔታ ኮንስተራክሽን ውል (General Condition of contract)
.
▶የኮንስትራክሽን ሳይት ላይ አንድ ህንፃ ተቌራጭ ስራውን ለማከናወን ወደ ኮንስትራክሽን ሳይት የሚያስገባቸው የህንፃ
ግብዓቶች ከኮንስትራክሽን ሳይት የማስወጣት መብቱ ምን ያህል
ነው ድረስ ነው?
▶አማካሪ/መሐንዲሱ/ ስራው አልቌል ብሎ እስካልተስማማ
ድረስ እቃ ወይም ሰራተኛ ለማመላለስ ከሚወጣ መኪና በስተቀር ማንኛውም ለፕሮጀክቱ የተመደበ የህንፃ ግብዓት ከኮንስትራክሽን ሳይት እንዳይወጣ በደብዳቤ መከልከል ይቻላል።
.
83. Ownership of plant and material
83.1 All equipment, temporary works, plant and materials provided by the Contractor shall,
when brought on the Site, be deemed to be exclusively intended for the execution of the works and the Contractor shall not remove the same or any part thereof, except for the purpose of moving it from
one part of the site to another, without the consent of the Engineer. Such consent shall, however, not be required for vehicles engaged in transporting any staff, labor, equipment, temporary works, plant or
materials to or from the Site.
.
▶የኮንስትራክሽን ሳይት ላይ አንድ ህንፃ ተቌራጭ ስራውን ለማከናወን ወደ ኮንስትራክሽን ሳይት የሚያስገባቸው የህንፃ
ግብዓቶች ከኮንስትራክሽን ሳይት የማስወጣት መብቱ ምን ያህል
ነው ድረስ ነው?
▶አማካሪ/መሐንዲሱ/ ስራው አልቌል ብሎ እስካልተስማማ
ድረስ እቃ ወይም ሰራተኛ ለማመላለስ ከሚወጣ መኪና በስተቀር ማንኛውም ለፕሮጀክቱ የተመደበ የህንፃ ግብዓት ከኮንስትራክሽን ሳይት እንዳይወጣ በደብዳቤ መከልከል ይቻላል።
.
83. Ownership of plant and material
83.1 All equipment, temporary works, plant and materials provided by the Contractor shall,
when brought on the Site, be deemed to be exclusively intended for the execution of the works and the Contractor shall not remove the same or any part thereof, except for the purpose of moving it from
one part of the site to another, without the consent of the Engineer. Such consent shall, however, not be required for vehicles engaged in transporting any staff, labor, equipment, temporary works, plant or
materials to or from the Site.
👍1
Forwarded from Ethio Construction Engineering
👉What is Liquidated damage? @COTMp
.
➡ስራ ተቌራጩ ለወሰደው ውል በግዜ ላለመጨረሱ ለባለቤት
ወይም ለውል ሰጪው አካል የሚከፍለው የካሳ ክፍያ ሲሆን∷
የጠቅላላ ኮንስትራክሽን ውል ይህ ሳይሆን ሲቀር ከዚህ በታች
በተጠቀሰው ቅጣት መሰረት ስራ ተቌራጩ መቅጣት እነደሚቻል
ይጠቅሳል።
1. ቅጣቱ 0.1 ፐርሰንት ወይም የጠቅላላ ፕሮጀክቱን አንድ አንድ
ሺኛ (1/1000) ላልፈፀመው ስራ ቀናት በየቀኑ ሊቀጣ ይገባል።
2. ነገር ግን ስራ ተቌራጩ በጠቅላላው ሊቀጣ የሚችለው
የፕሮጀክቱን አስር 10% (አስር ፐርሰንት). ሊበልጥ አይገባም።
⏩"Liquidated damages" means the compensation
stated in the contract as being payable by Contractor to the Public Body for failure to perform
the contract or part thereof within the periods under
the contract, or as payable by Contractor to the Public Body for any specific breach identified in the contract;
(a) A penalty of 0.1% or 1/1000 of the value of
undelivered Service for each day of delay until
actual delivery or performance,
(b) The cumulative penalty to be paid by the Contractor shall not exceed 10% of the contract price.
.
🚩ለሁሉም እንዲዳረስ ፖስቶቹን SHARE አድርጉልን።
👇👇👇👇👇
Join for more updates via the link below;
t.me/COTMp
👆👆👆👆👆
.
➡ስራ ተቌራጩ ለወሰደው ውል በግዜ ላለመጨረሱ ለባለቤት
ወይም ለውል ሰጪው አካል የሚከፍለው የካሳ ክፍያ ሲሆን∷
የጠቅላላ ኮንስትራክሽን ውል ይህ ሳይሆን ሲቀር ከዚህ በታች
በተጠቀሰው ቅጣት መሰረት ስራ ተቌራጩ መቅጣት እነደሚቻል
ይጠቅሳል።
1. ቅጣቱ 0.1 ፐርሰንት ወይም የጠቅላላ ፕሮጀክቱን አንድ አንድ
ሺኛ (1/1000) ላልፈፀመው ስራ ቀናት በየቀኑ ሊቀጣ ይገባል።
2. ነገር ግን ስራ ተቌራጩ በጠቅላላው ሊቀጣ የሚችለው
የፕሮጀክቱን አስር 10% (አስር ፐርሰንት). ሊበልጥ አይገባም።
⏩"Liquidated damages" means the compensation
stated in the contract as being payable by Contractor to the Public Body for failure to perform
the contract or part thereof within the periods under
the contract, or as payable by Contractor to the Public Body for any specific breach identified in the contract;
(a) A penalty of 0.1% or 1/1000 of the value of
undelivered Service for each day of delay until
actual delivery or performance,
(b) The cumulative penalty to be paid by the Contractor shall not exceed 10% of the contract price.
.
🚩ለሁሉም እንዲዳረስ ፖስቶቹን SHARE አድርጉልን።
👇👇👇👇👇
Join for more updates via the link below;
t.me/COTMp
👆👆👆👆👆
Telegram
ETCONp Discussion
📩ለማነኛውም ሀሳብ እና አስተያየት @Philemona7
✌️ይህ የ @etconp መወያያ ግሩፓቹ ነው።
✋This is discussion group of @ETCONpWORK
.
🔖ማሳሰብያ ...
.
⚡️ግሩፑ ላይ ማነኛውም ከ ኮንስትራክሽን ጉዳዮች ውጪ መለጠፍ በፍፁም አይፈቀድም!
@ETCONpBOT ፃፉልን እናመሰግናለን🙏
✌️ይህ የ @etconp መወያያ ግሩፓቹ ነው።
✋This is discussion group of @ETCONpWORK
.
🔖ማሳሰብያ ...
.
⚡️ግሩፑ ላይ ማነኛውም ከ ኮንስትራክሽን ጉዳዮች ውጪ መለጠፍ በፍፁም አይፈቀድም!
@ETCONpBOT ፃፉልን እናመሰግናለን🙏
Forwarded from Ethio Construction Engineering
COLUMN
column is a vertical compression member zar used to transfer z loads from intermediate floors and roofs towards z foundation.
TYPES OF COLUMN
A. Based on shape of cross section
1.L shaped
2.square
3.circular
B.based on lateral load resisting system ( bracing)
1.braced column:.able to carry horizontal or lateral loading like earth quick and wind load. Zer r different bracing like K bracing, X bracing, diagonal bracing....
2.unbraced column
C.based on sensitivity of P delta effect (second order effect)
1.sway column:. Is a column which shows a significant horizontal displacement. Mostly zis type of column has no bracing system
2. Non sway column:. Is a column having a lateral load resisting system and shows no lateral displacement
D. Based on load on z column
1.axially loaded column:. Carry pure axial load. Zey r columns with out eccentricity.
2.uniaxially loaded column:. Carry an axial load having eccentricity only in one axis (either along x or y)
3.biaxially loaded column:. Carry axial load having eccentricity in both direction.
E. Based on lateral support of bar
1.tied column:are column with longitudinal or main reinforcement supported by a ties having a particular spacing.
2. Spiral column:.a column with longitudinal or main reinforcement bar supported in a manner of helical spring
F. Based on length (slenderness)
1.short column:. a column with small or less slenderness ration. E.g pedestal column
2.long or slender column:. a column with hign slenderness ration.
G. based on material composition
1. Composit column:.a column cross sections in which composed of concrete and steel. In zis case steel is incased by concrete.
2. Infilled column:.a column type when concrete is poured in steel.
.
.
.le hulum endiders le guadegnochachihu share adirgulin and join us on
👇👇👇👇👇👇👇👇👇
t.me/COTMp
☝☝☝☝☝☝☝☝☝
column is a vertical compression member zar used to transfer z loads from intermediate floors and roofs towards z foundation.
TYPES OF COLUMN
A. Based on shape of cross section
1.L shaped
2.square
3.circular
B.based on lateral load resisting system ( bracing)
1.braced column:.able to carry horizontal or lateral loading like earth quick and wind load. Zer r different bracing like K bracing, X bracing, diagonal bracing....
2.unbraced column
C.based on sensitivity of P delta effect (second order effect)
1.sway column:. Is a column which shows a significant horizontal displacement. Mostly zis type of column has no bracing system
2. Non sway column:. Is a column having a lateral load resisting system and shows no lateral displacement
D. Based on load on z column
1.axially loaded column:. Carry pure axial load. Zey r columns with out eccentricity.
2.uniaxially loaded column:. Carry an axial load having eccentricity only in one axis (either along x or y)
3.biaxially loaded column:. Carry axial load having eccentricity in both direction.
E. Based on lateral support of bar
1.tied column:are column with longitudinal or main reinforcement supported by a ties having a particular spacing.
2. Spiral column:.a column with longitudinal or main reinforcement bar supported in a manner of helical spring
F. Based on length (slenderness)
1.short column:. a column with small or less slenderness ration. E.g pedestal column
2.long or slender column:. a column with hign slenderness ration.
G. based on material composition
1. Composit column:.a column cross sections in which composed of concrete and steel. In zis case steel is incased by concrete.
2. Infilled column:.a column type when concrete is poured in steel.
.
.
.le hulum endiders le guadegnochachihu share adirgulin and join us on
👇👇👇👇👇👇👇👇👇
t.me/COTMp
☝☝☝☝☝☝☝☝☝
Telegram
ETCONp Discussion
📩ለማነኛውም ሀሳብ እና አስተያየት @Philemona7
✌️ይህ የ @etconp መወያያ ግሩፓቹ ነው።
✋This is discussion group of @ETCONpWORK
.
🔖ማሳሰብያ ...
.
⚡️ግሩፑ ላይ ማነኛውም ከ ኮንስትራክሽን ጉዳዮች ውጪ መለጠፍ በፍፁም አይፈቀድም!
@ETCONpBOT ፃፉልን እናመሰግናለን🙏
✌️ይህ የ @etconp መወያያ ግሩፓቹ ነው።
✋This is discussion group of @ETCONpWORK
.
🔖ማሳሰብያ ...
.
⚡️ግሩፑ ላይ ማነኛውም ከ ኮንስትራክሽን ጉዳዮች ውጪ መለጠፍ በፍፁም አይፈቀድም!
@ETCONpBOT ፃፉልን እናመሰግናለን🙏
Forwarded from Ethio Construction Engineering (जॉर्डनो ג׳ורדנו ጆርዳኖ جوردانو จอร์แดโน่ JORDANO Ιορδάνοςஜார்டானோ)
This media is not supported in your browser
VIEW IN TELEGRAM
Charles bridge 🌉
Charles bridge is historic bridge that crosses the vltrava river in Prague , Czech Republic 🇨🇿 . It’s construction started in 1357 under auspices of king 👑 Charles IV , and finished in the beginning of the 15th century. The bridge replaced the old Judith bridge built in 1158-1172 that had been badly damaged by flood in 1342. This new bridge was originally called stone bridge or Prague bridge but has been renamed “Charles bridge “ since 1870. As the only means of crossing the river vltrva (moldau) until 1841, Charles bridge was the most important connection between Prague castle 🏰 the city’s old town and adjacent areas. This “solid-land” connection made Prague important as a trade route between eastern and Western Europe.
Pargue Czech Republic 🇨🇿
ፋይሉ 6.1MB ስለሆነ WiFi ቢጠቀሙ ይመረጣል
#brige
@ETCONp
https://t.me/ETCONp
Charles bridge is historic bridge that crosses the vltrava river in Prague , Czech Republic 🇨🇿 . It’s construction started in 1357 under auspices of king 👑 Charles IV , and finished in the beginning of the 15th century. The bridge replaced the old Judith bridge built in 1158-1172 that had been badly damaged by flood in 1342. This new bridge was originally called stone bridge or Prague bridge but has been renamed “Charles bridge “ since 1870. As the only means of crossing the river vltrva (moldau) until 1841, Charles bridge was the most important connection between Prague castle 🏰 the city’s old town and adjacent areas. This “solid-land” connection made Prague important as a trade route between eastern and Western Europe.
Pargue Czech Republic 🇨🇿
ፋይሉ 6.1MB ስለሆነ WiFi ቢጠቀሙ ይመረጣል
#brige
@ETCONp
https://t.me/ETCONp
Forwarded from Ethio Construction Engineering (जॉर्डनो ג׳ורדנו ጆርዳኖ جوردانو จอร์แดโน่ JORDANO Ιορδάνοςஜார்டானோ)