Why cracks are formed in the concrete ?
List out the reasons
@etconp
Facebook :- https://www.facebook.com/etconp/
List out the reasons
@etconp
Facebook :- https://www.facebook.com/etconp/
Ethio Construction Engineering
What’s the name of this machine and it’s use ? @etconp Facebook:- https://www.facebook.com/etconp/
The pressure sand filler
The pressure sand filler consists of multiple layer of sand with a variety in size and specific gravity.
These fillers are designed to remove turbidity and suspended particles present in the feed water with minimum pressure drop. These filters are custom designed to suit the process requirement.
@etconp
Facebook:- https://www.facebook.com/etconp/
The pressure sand filler consists of multiple layer of sand with a variety in size and specific gravity.
These fillers are designed to remove turbidity and suspended particles present in the feed water with minimum pressure drop. These filters are custom designed to suit the process requirement.
@etconp
Facebook:- https://www.facebook.com/etconp/
Design of a stair
* design for maximum bending moment
and check maximum shear force
* the depth is to be fixed from
deflection criteria
* stair case slab is designed as a
conventional slab.
* all rules regarding the detailing are
similar to that of slab
*enough development and anchorage
lengths for steel should be provided
Do you want us to post worked stair design (structure) ? If you want say yes @cotmp
የ stair design ምሳሌ እንዲለቀቅ ትፈልጋላችሁ ?
@etconp
Facebook:- https://www.facebook.com/etconp/
* design for maximum bending moment
and check maximum shear force
* the depth is to be fixed from
deflection criteria
* stair case slab is designed as a
conventional slab.
* all rules regarding the detailing are
similar to that of slab
*enough development and anchorage
lengths for steel should be provided
Do you want us to post worked stair design (structure) ? If you want say yes @cotmp
የ stair design ምሳሌ እንዲለቀቅ ትፈልጋላችሁ ?
@etconp
Facebook:- https://www.facebook.com/etconp/
Ethio Construction Engineering
Design of a stair * design for maximum bending moment and check maximum shear force * the depth is to be fixed from deflection criteria * stair case slab is designed as a conventional slab. * all rules regarding the detailing are similar…
Design the dog legged (U- stair) staircase if supported on walls 300mm thick along landing slab at both ends
Floor finish = 1KN/m², live load = 5KN/m² , riser (R)= 150mm , tread (T)= 300mm
- C20 concrete
- Fe415 rebar
We will post the answer after you try it
@etconp
Facebook :- https://www.facebook.com/etconp/
Floor finish = 1KN/m², live load = 5KN/m² , riser (R)= 150mm , tread (T)= 300mm
- C20 concrete
- Fe415 rebar
We will post the answer after you try it
@etconp
Facebook :- https://www.facebook.com/etconp/
👍2
Forwarded from Ethio Construction Engineering (जॉर्डनो ג׳ורדנו ጆርዳኖ جوردانو จอร์แดโน่ JORDANO Ιορδάνοςஜார்டானோ)
👉PROPERTIES OF AGGREGATES FOR CONCRETE @COTMp
.
▶Approximately 75% of the volume of concrete is occupied by aggregates,so
quality of aggregates plays an important role in determining properties of concrete.
*Aggregates come in various shapes, sizes, and materials ranging from fine particles of sand to large, coarse rocks. *Natural aggregates are formed by process of weathering and abrasion or by artificially crushing large parent mass.
Because cement is the most expensive ingredient in making concrete, it is
desirable to minimize the amount of cement used. 70 to 80% of the volume of
concrete is aggregate in order to keep the cost of the concrete low.
*Soft, porous aggregates can result in weak concrete with low wear resistance, while using hard aggregates can make strong concrete with a high resistance to abrasion.
*Aggregates are of two basic types: Coarse: crushed rock, gravel or screenings.
*Fine: fine and coarse sands and crusher fines Aggregates should be clean, hard, and strong.
*The aggregate is usually washed to remove any dust, silt, clay, organic matter, or other impurities that would interfere with
the bonding reaction with the cement paste.
*The choice of aggregate is determined by the proposed use of the concrete.
*Normally sand, gravel, and crushed stone are used as aggregates to make concrete.
*The aggregate should be well-graded to improve packing efficiency and minimize the amount of cement paste needed. Also, this makes the concrete more workable.
Some of the important properties of aggregates are discussed below.
▶PROPERTIES OF AGGREGATES
1. SOUNDNESS:Rocks that undergo volume changes due to wetting and drying are rare. However, aggregate is susceptible to volume change during freezing and thawing cycles.
*Freezing can cause internal stresses to build up as water inside the aggregate freezes and expands.
2. WEAR RESISTANCE
A good aggregate will be hard, dense, strong, and
free of porous material. The abrasion resistance of
aggregate can be tested by the Los Angeles abrasion test; however, this test does not match
well with concrete wear in the field.
3. ALKALI-AGGREGATE
REACTION: An expansive reaction between some reactive forms of silica with the aggregate and alkalis in the cement paste.
*The result is overall cracking in the
structure, manifesting itself in map or pattern cracking at the surface. *This reaction can be
controlled most easily by using low-alkali cements.
However, due to changes in manufacturing, low-
alkali cements may not be feasible.
*A better approach is to avoid aggregate with the potential or proven record of reactivity. A low w/c ratio is very impermeable and will slow down the reaction but not stop it. No adverse reactions will occur without external water.
4. OTHER ALKALI-SILICA
REACTIONS: Sand-gravels found in river systems of Kansas and Nebraska are highly reactive and cause map cracking. *Replacement of 30% of the aggregate with
crushed limestone is effective in reducing the damage. Basically, it results in the separation of flat clay minerals causing very slow expansion.
5. ALKALI-CARBONATE REACTIONS: An expansive reaction involving clayey
carbonate rock. Reaction can be controlled by using low-alkali cements or blending aggregate with other less reactive material.
*ASTM has set standards for deleterious substances in aggregates, which depend on application.
6. IMPURITIES: Solid materials – particles passing a 200- mesh sieve.
*These fine particles may increase water requirements and interfere with surface bonding
between cement and coarse aggregates.
Soluble substances –organic matter may interfere chemically with alkaline cement pastes affecting setting time. *Aggregates obtained from the sea should be thoroughly cleaned
to avoid problems from salt contamination.
7. UNSOUND PARTICLES
Soft particles such as clay lumps, wood, and coal
will cause pitting and scaling at the surface.
Organic compounds can be released which interfere
with setting and hardening. Weak material of low density which have low wear resistance should also be avoided.
https://telegram.me/COTMp
.
▶Approximately 75% of the volume of concrete is occupied by aggregates,so
quality of aggregates plays an important role in determining properties of concrete.
*Aggregates come in various shapes, sizes, and materials ranging from fine particles of sand to large, coarse rocks. *Natural aggregates are formed by process of weathering and abrasion or by artificially crushing large parent mass.
Because cement is the most expensive ingredient in making concrete, it is
desirable to minimize the amount of cement used. 70 to 80% of the volume of
concrete is aggregate in order to keep the cost of the concrete low.
*Soft, porous aggregates can result in weak concrete with low wear resistance, while using hard aggregates can make strong concrete with a high resistance to abrasion.
*Aggregates are of two basic types: Coarse: crushed rock, gravel or screenings.
*Fine: fine and coarse sands and crusher fines Aggregates should be clean, hard, and strong.
*The aggregate is usually washed to remove any dust, silt, clay, organic matter, or other impurities that would interfere with
the bonding reaction with the cement paste.
*The choice of aggregate is determined by the proposed use of the concrete.
*Normally sand, gravel, and crushed stone are used as aggregates to make concrete.
*The aggregate should be well-graded to improve packing efficiency and minimize the amount of cement paste needed. Also, this makes the concrete more workable.
Some of the important properties of aggregates are discussed below.
▶PROPERTIES OF AGGREGATES
1. SOUNDNESS:Rocks that undergo volume changes due to wetting and drying are rare. However, aggregate is susceptible to volume change during freezing and thawing cycles.
*Freezing can cause internal stresses to build up as water inside the aggregate freezes and expands.
2. WEAR RESISTANCE
A good aggregate will be hard, dense, strong, and
free of porous material. The abrasion resistance of
aggregate can be tested by the Los Angeles abrasion test; however, this test does not match
well with concrete wear in the field.
3. ALKALI-AGGREGATE
REACTION: An expansive reaction between some reactive forms of silica with the aggregate and alkalis in the cement paste.
*The result is overall cracking in the
structure, manifesting itself in map or pattern cracking at the surface. *This reaction can be
controlled most easily by using low-alkali cements.
However, due to changes in manufacturing, low-
alkali cements may not be feasible.
*A better approach is to avoid aggregate with the potential or proven record of reactivity. A low w/c ratio is very impermeable and will slow down the reaction but not stop it. No adverse reactions will occur without external water.
4. OTHER ALKALI-SILICA
REACTIONS: Sand-gravels found in river systems of Kansas and Nebraska are highly reactive and cause map cracking. *Replacement of 30% of the aggregate with
crushed limestone is effective in reducing the damage. Basically, it results in the separation of flat clay minerals causing very slow expansion.
5. ALKALI-CARBONATE REACTIONS: An expansive reaction involving clayey
carbonate rock. Reaction can be controlled by using low-alkali cements or blending aggregate with other less reactive material.
*ASTM has set standards for deleterious substances in aggregates, which depend on application.
6. IMPURITIES: Solid materials – particles passing a 200- mesh sieve.
*These fine particles may increase water requirements and interfere with surface bonding
between cement and coarse aggregates.
Soluble substances –organic matter may interfere chemically with alkaline cement pastes affecting setting time. *Aggregates obtained from the sea should be thoroughly cleaned
to avoid problems from salt contamination.
7. UNSOUND PARTICLES
Soft particles such as clay lumps, wood, and coal
will cause pitting and scaling at the surface.
Organic compounds can be released which interfere
with setting and hardening. Weak material of low density which have low wear resistance should also be avoided.
https://telegram.me/COTMp
Telegram
ETCONp Discussion
✌️ይህ የ @etconp መወያያ ግሩፓቹ ነው።
✋This is discussion group of @ETCONpWORK
.
🔖ማሳሰብያ ...
.
⚡️ግሩፑ ላይ ማነኛውም ከ ኮንስትራክሽን ጉዳዮች ውጪ መለጠፍ በፍፁም አይፈቀድም!
.
📩ለማነኛውም ሀሳብ እና አስተያየት @ETCONpBOT ፃፉልን። እናመሰግናለን🙏
✋This is discussion group of @ETCONpWORK
.
🔖ማሳሰብያ ...
.
⚡️ግሩፑ ላይ ማነኛውም ከ ኮንስትራክሽን ጉዳዮች ውጪ መለጠፍ በፍፁም አይፈቀድም!
.
📩ለማነኛውም ሀሳብ እና አስተያየት @ETCONpBOT ፃፉልን። እናመሰግናለን🙏
👍1
Which one of the following can’t be added in 33 grade OPC after burning stage ?
Anonymous Quiz
27%
Gypsum
28%
Water
20%
Coloring agent
25%
Clay
ከቦሌ አትላስ ወደ ኡራኤል የሚወስደው መንገድ ላይ ያለ ድልድይ wing wall collapse እያረገ ነው
@etconp
Facebook:- https://www.facebook.com/etconp/
@etconp
Facebook:- https://www.facebook.com/etconp/
For road pavement repair works , the cement used is
Anonymous Quiz
21%
OPC
14%
PPC
47%
Rapid hardening cement
18%
Quick setting cement
Do you want us to share any book ?
Book , not work sheet or worked files
እንድንለቅላችው ምትፈልጉት መፅሀፍ አለ ? መፅሀፍ የተሰራ ፋይል ሳይሆን መፅሀፍ
@etconp
Book , not work sheet or worked files
እንድንለቅላችው ምትፈልጉት መፅሀፍ አለ ? መፅሀፍ የተሰራ ፋይል ሳይሆን መፅሀፍ
@etconp
Forwarded from ETCONp Digital Library
@ETCONP irrigation Engineering .pdf
48 MB
Which apparatus is used to test the setting time of cement
Anonymous Quiz
10%
Core cutter
8%
Vibrator
27%
Universal testing machine
55%
Vicat apparatus
Which software is used for construction management
Anonymous Quiz
3%
Photoshop
14%
Maya
38%
Corecon
46%
AUTOCAD
❤1