The structure which support external applied load by developing tension in it is called
Anonymous Quiz
12%
Plate
57%
Cable
9%
Shell
22%
Arch
The roller support in a given beam is taken in conjugate beam as
Anonymous Quiz
19%
Fixed support
17%
Free end
38%
Hinge
26%
Roller support
The stiffness matrix method of structure analysis, the the quantity taken as redundant is ___________.
Anonymous Quiz
39%
Deflection
24%
Rotation
32%
Both
5%
None
The bond strength of concrete increases with
Anonymous Quiz
5%
The quantity of steel
17%
The tensile strength of steel
67%
The grade of concrete
11%
The quantity of concrete
The following soil is good for making bricks
Anonymous Quiz
14%
Black cotton
20%
Silty
31%
Alluvial
34%
Sand and silt
Ethio Construction Engineering
The bond strength of concrete increases with
Note
Bond strength of concrete depends on
- chemical adhesion
- frictional resistance
- mechanical resistance
If grade of concrete increases then friction b/n concrete and steel increases
@etconp
Facebook:- https://www.facebook.com/etconp/
Bond strength of concrete depends on
- chemical adhesion
- frictional resistance
- mechanical resistance
If grade of concrete increases then friction b/n concrete and steel increases
@etconp
Facebook:- https://www.facebook.com/etconp/
1. What’s the standard pitch /angel of staircase ? (Put it on range) suitable for ergonomic
2. What’s The standard rise of staircase (range) suitable for ergonometric
3. What’s the standard trad of staircase (range) suitable for ergonomic
4. What’s the size of brick 🧱? List the
two
5. What’s initial setting time of cement ?
6. Final setting time of cement ?
7. What’s the thickness lintel ?
8. What’s the standard height of
parapet wall ?
9. What’s Weight of 1 cement bag ?
10. Why do we shock HBC block in
water before we use in for walling ?
@etconp
Facebook:- https://www.facebook.com/etconp/
2. What’s The standard rise of staircase (range) suitable for ergonometric
3. What’s the standard trad of staircase (range) suitable for ergonomic
4. What’s the size of brick 🧱? List the
two
5. What’s initial setting time of cement ?
6. Final setting time of cement ?
7. What’s the thickness lintel ?
8. What’s the standard height of
parapet wall ?
9. What’s Weight of 1 cement bag ?
10. Why do we shock HBC block in
water before we use in for walling ?
@etconp
Facebook:- https://www.facebook.com/etconp/
Ethio Construction Engineering
1. What’s the standard pitch /angel of staircase ? (Put it on range) suitable for ergonomic 2. What’s The standard rise of staircase (range) suitable for ergonometric 3. What’s the standard trad of staircase (range) suitable for ergonomic 4. What’s the…
Answer
1. 25⁰ - 40⁰
2. 15cm-20cm
3. 25cm-30cm
4. Type 1 . 230mm x 110mm x 55mm
Type 2. 225 mm x 112 mm x 75 mm
5. 30 minutes
6. 10 hours
7. 15cm thickness
8. 1 meter
9. 50kg
10. Not to suck the moisture of mortar
@etconp
Facebook:- https://www.facebook.com/etconp/
1. 25⁰ - 40⁰
2. 15cm-20cm
3. 25cm-30cm
4. Type 1 . 230mm x 110mm x 55mm
Type 2. 225 mm x 112 mm x 75 mm
5. 30 minutes
6. 10 hours
7. 15cm thickness
8. 1 meter
9. 50kg
10. Not to suck the moisture of mortar
@etconp
Facebook:- https://www.facebook.com/etconp/
Forwarded from ETCONp Digital Library
@ETCONP irrigation Engineering .pdf
48 MB
Forwarded from ETCONp Digital Library
Forwarded from ETCONp Digital Library
@ETCONp Interior light design .pdf
4.2 MB
📐interior light Design @ETCONp
What is false column
State the tensile strength of m20 concrete as IS :456
Calculate design strength of Fe 415 grade steel
@etconp
Facebook:- https://www.facebook.com/etconp/
Calculate design strength of Fe 415 grade steel
@etconp
Facebook:- https://www.facebook.com/etconp/
Ethio Construction Engineering
State the tensile strength of m20 concrete as IS :456 Calculate design strength of Fe 415 grade steel @etconp Facebook:- https://www.facebook.com/etconp/
Answer 1
Tensile strength = 0.7 √ 𝑓ck
𝑓cr= 0.7 √ 20
𝑓cr= 3.13N/mm²
Answer 2
Design strength (𝑓d) = 𝑓y/ym
𝑓d= 415 / safety factor (1.15)
𝑓d = 415/1.15 = 360.87 N/mm²
@etconp
Facebook:- https://www.facebook.com/etconp/
Tensile strength = 0.7 √ 𝑓ck
𝑓cr= 0.7 √ 20
𝑓cr= 3.13N/mm²
Answer 2
Design strength (𝑓d) = 𝑓y/ym
𝑓d= 415 / safety factor (1.15)
𝑓d = 415/1.15 = 360.87 N/mm²
@etconp
Facebook:- https://www.facebook.com/etconp/
Rebound hammer test is used to measure
Anonymous Quiz
11%
Quality of concrete
14%
Surface hardness
36%
Compressive strength of concrete
38%
All of the above
Which one of the following is not type of slab ?
Anonymous Quiz
3%
One way slab
86%
Three way slab
2%
Two way slab
8%
R.B slab