Forwarded from ETCONp Digital Library
@ETCONP irrigation Engineering .pdf
48 MB
Forwarded from ETCONp Digital Library
Forwarded from ETCONp Digital Library
@ETCONp Interior light design .pdf
4.2 MB
📐interior light Design @ETCONp
What is false column
State the tensile strength of m20 concrete as IS :456
Calculate design strength of Fe 415 grade steel
@etconp
Facebook:- https://www.facebook.com/etconp/
Calculate design strength of Fe 415 grade steel
@etconp
Facebook:- https://www.facebook.com/etconp/
Ethio Construction Engineering
State the tensile strength of m20 concrete as IS :456 Calculate design strength of Fe 415 grade steel @etconp Facebook:- https://www.facebook.com/etconp/
Answer 1
Tensile strength = 0.7 √ 𝑓ck
𝑓cr= 0.7 √ 20
𝑓cr= 3.13N/mm²
Answer 2
Design strength (𝑓d) = 𝑓y/ym
𝑓d= 415 / safety factor (1.15)
𝑓d = 415/1.15 = 360.87 N/mm²
@etconp
Facebook:- https://www.facebook.com/etconp/
Tensile strength = 0.7 √ 𝑓ck
𝑓cr= 0.7 √ 20
𝑓cr= 3.13N/mm²
Answer 2
Design strength (𝑓d) = 𝑓y/ym
𝑓d= 415 / safety factor (1.15)
𝑓d = 415/1.15 = 360.87 N/mm²
@etconp
Facebook:- https://www.facebook.com/etconp/
Rebound hammer test is used to measure
Anonymous Quiz
11%
Quality of concrete
14%
Surface hardness
36%
Compressive strength of concrete
38%
All of the above
Which one of the following is not type of slab ?
Anonymous Quiz
3%
One way slab
86%
Three way slab
2%
Two way slab
8%
R.B slab
Abbreviation in civil engineering
@etconp
- DPC - damp proof course
- RCC - reinforced cement concrete
- RBC - reinforced brick concrete
-R.B.W- reinforced brick work
- C.I.sheet - corrugated iron sheet
ቆርቆሮ
- C.I.pipe - cast iron pipe
- NCF - Neat cement finishing
- SWG - standard wire gauge
- MB - measurement book
- CP - cement plaster
- LC - like concrete
- CC - cement concrete
- AC - Asbests cement
- PERT - programme Evaluation and
Review Technique
- CPM- critical path method
- USD - ultimate state design
- W.S.D - working stress design
- PL - plinth level
What’s the difference between RC and RCC ?
@etconp
Facebook:- https://www.facebook.com/etconp/
@etconp
- DPC - damp proof course
- RCC - reinforced cement concrete
- RBC - reinforced brick concrete
-R.B.W- reinforced brick work
- C.I.sheet - corrugated iron sheet
ቆርቆሮ
- C.I.pipe - cast iron pipe
- NCF - Neat cement finishing
- SWG - standard wire gauge
- MB - measurement book
- CP - cement plaster
- LC - like concrete
- CC - cement concrete
- AC - Asbests cement
- PERT - programme Evaluation and
Review Technique
- CPM- critical path method
- USD - ultimate state design
- W.S.D - working stress design
- PL - plinth level
What’s the difference between RC and RCC ?
@etconp
Facebook:- https://www.facebook.com/etconp/
Continued ......
- B.M - benchmark for (surveying)
- B.M - bending moment ( Structure)
- B.O.F - bottom of foundation
- BOQ - bill of quantity
- BLK - block work
- BRW - brick retaining wall
- BWK - brick work
-CBW - concrete block work
@etconp
Facebook:- https://www.facebook.com/etconp/
- B.M - benchmark for (surveying)
- B.M - bending moment ( Structure)
- B.O.F - bottom of foundation
- BOQ - bill of quantity
- BLK - block work
- BRW - brick retaining wall
- BWK - brick work
-CBW - concrete block work
@etconp
Facebook:- https://www.facebook.com/etconp/
Ethio Construction Engineering
What’s the difference between one way slab and two way slab ? @etconp
Answer
One way slab
- supported by beams in only two sides
- the ratio of longer span panel (L) to shorter span panel (B) is equal or greater than 2. Thus, L/B >= 2
- main reinforcement is provided in only one direction for one way slabs
Two way slab
- supported by beams in all four sides
- the ratio of longer span panel (L) to shorter span panel (B) is less than 2. Thus , L/B < 2.
- main reinforcement is provided in both the direction of two way slabs.
@etconp
Facebook:- https://www.facebook.com/etconp/
One way slab
- supported by beams in only two sides
- the ratio of longer span panel (L) to shorter span panel (B) is equal or greater than 2. Thus, L/B >= 2
- main reinforcement is provided in only one direction for one way slabs
Two way slab
- supported by beams in all four sides
- the ratio of longer span panel (L) to shorter span panel (B) is less than 2. Thus , L/B < 2.
- main reinforcement is provided in both the direction of two way slabs.
@etconp
Facebook:- https://www.facebook.com/etconp/
How many days concrete structure take to gain 100% strength
Anonymous Quiz
3%
7 days
3%
14 days
71%
28 days
22%
Life long
Relation between E,K,μ,G
E = 3K (1-2μ)
E = 2G (1+μ)
E = 9KG / (3K+G)
μ = 3Κ-2G /( 6k +2G)
Where ;
E = Young’s modulus
G = shear modulus
K = bulk modulus
μ = poisson’s ratio
Telegram:- https://t.me/ETCONp
Facebook:- https://www.facebook.com/etconp/
E = 3K (1-2μ)
E = 2G (1+μ)
E = 9KG / (3K+G)
μ = 3Κ-2G /( 6k +2G)
Where ;
E = Young’s modulus
G = shear modulus
K = bulk modulus
μ = poisson’s ratio
Telegram:- https://t.me/ETCONp
Facebook:- https://www.facebook.com/etconp/
Telegram
Ethio Construction Engineering
🔨 World Construction Engineering
Latest updates, tips, and tutorials on building, civil engineering, and construction in World.
Learn, build, and grow with us!
📨 @Philemona7 Or @ETCONpBOT
For Ad:- https://telega.io/c/etconp
Latest updates, tips, and tutorials on building, civil engineering, and construction in World.
Learn, build, and grow with us!
📨 @Philemona7 Or @ETCONpBOT
For Ad:- https://telega.io/c/etconp