Ethio Construction Engineering
32.3K subscribers
6.27K photos
359 videos
1.99K files
3.33K links
🔨 World Construction Engineering
Latest updates, tips, and tutorials on building, civil engineering, and construction in World.
Learn, build, and grow with us!

📨 @Philemona7 Or @ETCONpBOT

For Ad:- https://telega.io/c/etconp
Download Telegram
The ratio of volume of voids to the volume of soil mass is _______
Anonymous Quiz
48%
Void ratio
10%
Degree of saturation
40%
Porosity
2%
None
The strength and durability of concrete depends upon
Anonymous Quiz
10%
Grading of aggregate
3%
Surface area of aggregate
3%
Shapes of aggregate
84%
All of the above
This building is located in Addis Ababa as you can see the column and beam are disconnected at the middle span of the building; how can the building is stable? 🤔

ይህ የምትመለከቱት ህንፃ ወደላይ 15 ፎቅ ነው ከበስተኋላ column እና beam እልተገናኙም ታዲያ እንዴት ህንፃው stable ሆነ 🤔????

Write your opinion

@etconp

Facebook:- https://www.facebook.com/etconp/
What’s the reason of failure

@etconp

Facebook:- https://www.facebook.com/etconp/
Important note

We will explain the tests one by one
Stay tuned

@etconp

Facebook:- https://www.facebook.com/etconp/
Suppose you took a contract to cast 4m³ of slab C25 (M20) concrete it’s mix ratio is 1:1.5:3 (cement:sand: aggregate)

€ . Quantify the amount of sand
required in kilogram

€. Quantify the amount of cement
Required ( Portland) in kilogram

€. Quantify the amount of aggregate
required (gravel) in kilogram

C25/M20 4m³ ሶሌታ አርማታ ለመሙላት ውል አለህ እንበል የውህድ ጥምርታ (mix ratio) 1:1.5:3 ነው (ሲሚንቶ፣አሸዋ፣ጠጠር) በዚህ መሰረት የሚከተሉትን ጥያቄዎች መልስ

፩. ምን ያህል ኪሎግራም አሸዋ ያስፈልጋል

፪. ምን ያህል ኪሎግራም ሲሚንቶ
ያስፈልጋል

፫. ምን ያህል ኪሎግራም ጠጠር
ያስፈልጋል ?

@etconp

Facebook:- https://www.facebook.com/etconp/
The ability of a material to absorb energy till the elastic limit is known as
Anonymous Quiz
16%
Resilience
23%
Ductility
47%
Elasticity
14%
Plasticity
Ethio Construction Engineering
Suppose you took a contract to cast 4m³ of slab C25 (M20) concrete it’s mix ratio is 1:1.5:3 (cement:sand: aggregate) € . Quantify the amount of sand required in kilogram €. Quantify the amount of cement Required ( Portland) in kilogram €.…
- sand in kilogram = 1.68m3 x 1602kg/m3 = 2691.36 kilogram
- cement in kilogram = 1.12m3 x 1440kg/m3 = 1612.8 kilogram
- gravel in kilogram = 3.36m3 x 1680kg/m3= 5644.8 kilogram

@etconp

Facebook:- https://www.facebook.com/etconp/
❤1
What do you call the name of the wire nailed in the column?

What’s it’s purpose?

@etconp

Facebook:- https://www.facebook.com/etconp/
👍1
Forwarded from Ethio Construction Engineering (जॉर्डनो ג׳ורדנו ጆርዳኖ جوردانو จอร์แดโน่ JORDANO Ιορδάνοςஜார்டானோ)
Research እየሰራችሁ questionnaire ካላችሁ እዚ ቻናል ላይ እንዲለቀቅላችሁ ከፈለጋችሁ ለመተባበር ዝግጁ ነን።

We can share your ongoing research questionnaire here in this channel. We are here to collaborate

@etconp

Facebook:- https://www.facebook.com/etconp/
Ethio Construction Engineering
What do you call the name of the wire nailed in the column? What’s it’s purpose? @etconp Facebook:- https://www.facebook.com/etconp/
- it is called chicken wire mesh

To prevent crack in plastering work we use chicken mesh at junction of different material such between wall and column junction where coefficient of thermal expansion of different material is different and due to that chances of crack after plastering is bound to occur that’s why we use chicken mesh.

@etconp

Facebook:- https://www.facebook.com/etconp/
Types of dam and it’s components

@etconp

Facebook:- https://www.facebook.com/etconp/
Calculate the quantity of embankment

-Length of the embankment = 150m
- width of the embankment = 10 m
- side slope : 2:1
- depth at each 30 m interval : 0.6m,
1.2m, 1.4m, 1.6m, 1.4m and 1.6m

@etconp

Facebook:- https://www.facebook.com/etconp/
How do we calculate dead load of a slab ?

Given :- length = 6 meter
Width = 8 meter
Depth = 0.15 meter

Assume it’s plain concrete (concrete with no reinforcement bar)

@etconp

Facebook:- https://www.facebook.com/etconp/
Question

1. Can you describe what a projection line is ?

2. Can you list out the various steps
involved in the concreting process ?

3. List out the reinforcements that are
used in the process of prestressing

4. How do you describe the soundness
of cement ?

@etconp

Facebook:- https://www.facebook.com/etconp/
👍1
Ethio Construction Engineering
How do we calculate dead load of a slab ? Given :- length = 6 meter Width = 8 meter Depth = 0.15 meter Assume it’s plain concrete (concrete with no reinforcement bar) @etconp Facebook:- https://www.facebook.com/etconp/
Answer

1. Let us calculate Dead load per unit Area

A. with kilogram per meter square

- slab thickess = 150 mm (0.150 m)
- the common density of concrete = 2400kg/m3
- Dead load (DL) = 2400kg/m3 * 0.15m
- Dead load (DL) = 360 kg/m2......... in kilogram per meter square

B. with Newton per meter square

- slab thickness = 150mm (0.150 m)
.
.
.

Open the image for full answer

ለሙሉ መልስ ምስሉን ይክፈቱት

We thank those who participated 🙏

ለተሳተፋችሁ አባላት ምስጋና እናቀርባለን

@etconp

Facebook:- https://www.facebook.com/etconp/
This media is not supported in your browser
VIEW IN TELEGRAM
Vibrating concrete is critical because by removing air pockets & packing the aggregate particles together, it increases the density and strength of the concrete. Tightly packed particles will result in a stronger, more durable concrete structure. Concrete which has not been vibrated is full of small air pockets (sometimes known as honeycombing) which results in a poor finish and weak structure.

If you are interested in this topic we posted article with brief explanation with addition of video

Here is the link :- https://fb.watch/aSObwDQwSX/

ይህን ርእስ ይበልጥ በዝርዝር ማንበብ ከፈለጋችሁ በ Facebook ገፃችን ረዘም ያለ አምድ ከነ ቪዲዮ አዘጋጅተናል

መስፈንጠሪያ/link :- https://fb.watch/aSOtceTfJw/

@etconp

Facebook:- https://www.facebook.com/etconp/
👍1
How do you calculate the number of stirrups?

What’s the formula?

@etconp

Facebook:- https://www.facebook.com/etconp/
Ethio Construction Engineering
How do you calculate the number of stirrups? What’s the formula? @etconp Facebook:- https://www.facebook.com/etconp/
Answer

Number of stirrups

= [( length of a span)/( spacing of a stirrup)-1]

@etconp

Facebook:- https://www.facebook.com/etconp/