👉What is the main cause of diagonal cracks in concrete columns?
@etconp
@etconp
#Quiz
1.least types of bituminous test?
2.discuss difference between bridge and building?
3.divide pavement materials and least it?
@etconp
Facebook:- https://t.me /ETCONP
1.least types of bituminous test?
2.discuss difference between bridge and building?
3.divide pavement materials and least it?
@etconp
Facebook:- https://t.me /ETCONP
The process of making the back ground rough before plastering is
Anonymous Quiz
22%
Dubbing
24%
Hacking
34%
Blisting
20%
Peeling
😢1
❤1
Slope of stairs should be ________
Anonymous Quiz
44%
15 ⁰ - 45 ⁰
16%
20 ⁰- 30 ⁰
28%
25 ⁰- 40 ⁰
12%
45 ⁰- 60 ⁰
👍1
The hydrostatic force acts through
Anonymous Quiz
59%
Center of pressure
14%
Metacentric
10%
Center of top edge
17%
Center of bottom edge
👍1
The property of a liquid which offers resistance to the movement of one layer of liquid over another adjacent layer of liquid is called _______.
Anonymous Quiz
9%
Compressibility
19%
Capillary
23%
Surface tension
49%
Viscosity
👍1
❀Objective of prestressed Concrete
☞The main purpose of having prestressed concrete is to increase the load that the member can withstand. This is most common in long span beams found on bridges and railway viaducts, slab, and concrete piles. Prestressed concrete may be precast or cast in place.
@etconp
☞The main purpose of having prestressed concrete is to increase the load that the member can withstand. This is most common in long span beams found on bridges and railway viaducts, slab, and concrete piles. Prestressed concrete may be precast or cast in place.
@etconp
What is this
1️⃣. Rebar Chair
2️⃣. Stirrups
3️⃣. Bond
4️⃣. Anchorage
@etconp
Facebook:- https://www.facebook.com/etconp/
1️⃣. Rebar Chair
2️⃣. Stirrups
3️⃣. Bond
4️⃣. Anchorage
@etconp
Facebook:- https://www.facebook.com/etconp/
What kind of slab is this ?
1️⃣. Post tensioned slab
2️⃣. Waffle slab
3️⃣. Pre tensioned slab
4️⃣. Box slab
@etconp
Facebook:- https://www.facebook.com/etconp/
1️⃣. Post tensioned slab
2️⃣. Waffle slab
3️⃣. Pre tensioned slab
4️⃣. Box slab
@etconp
Facebook:- https://www.facebook.com/etconp/
Name the failure
1️⃣.Tension failure
2️⃣. Shear failure
3️⃣. Buckling failure
4️⃣.Bending failure
@etconp
Facebook:- https://www.facebook.com/etconp/
1️⃣.Tension failure
2️⃣. Shear failure
3️⃣. Buckling failure
4️⃣.Bending failure
@etconp
Facebook:- https://www.facebook.com/etconp/
👍1
Ethio Construction Engineering
The specific gravity of water is taken as ______.
Relative density, or specific gravity, is the ratio of the density of a substance to the density of a given reference material. Specific gravity for liquids is nearly always measured with respect to water at its densest; for gases, the reference is air at room temperature.
ከ ውሀ ጋር ሌሎችን ማቴሪያሎች ያላቸው ንፃሬ ነው ስለዚህ የ ውሀ የራሱ አንድ ነው
@etconp
Facebook:- https://www.facebook.com/etconp/
ከ ውሀ ጋር ሌሎችን ማቴሪያሎች ያላቸው ንፃሬ ነው ስለዚህ የ ውሀ የራሱ አንድ ነው
@etconp
Facebook:- https://www.facebook.com/etconp/
❤1
Suppose the length, breadth and thickness of asphalt layer are 150meters , 10meters and 15cm respectively
- Assume the asphalt is 2400kg/m³
- And one dumper carries 40 tones
@etconp
Facebook:- https://www.facebook.com/etconp/
- Assume the asphalt is 2400kg/m³
- And one dumper carries 40 tones
@etconp
Facebook:- https://www.facebook.com/etconp/
❤1
Ethio Construction Engineering
Suppose the length, breadth and thickness of asphalt layer are 150meters , 10meters and 15cm respectively - Assume the asphalt is 2400kg/m³ - And one dumper carries 40 tones @etconp Facebook:- https://www.facebook.com/etconp/
Answer
- Volume of asphalt = L x W x T
- volume of asphalt = 150m x 10m x 0.15m
- volume of asphalt = 225m³
For full answer check it on the image
መልስ
በመጀመሪያ ለ አስፋልቱ ንጣፍ ምን ያህል አስፋልት
(በ ቮሊዩም) እንደሚያስፈልገን እናስላ
ቮሊዩም = ርዝመት x ስፋት x ጥልቀት (ውፍረት)
ቮሊዩም = 150 ሜትር x 10 ሜትር x 0.15 ሜትር (15ሳንቲም)
ቮሊዩም = 225 ሜትሪክ ኪዩብ
ለ አስፋልት ንጣፍ የሚያስፈልገን 225 ሜትሪክ ኪዩብ ነው
ነገር ግን የተነገረን የ መኪናው የመጫኛ አቅም ነው በ volumetric ሳይሆን በ gravimetric (በክብደት ነው) ነው ስለዚህ የሚያስፈልገንን የ አስፋልት መጠን በ ኪሎ ግራም እናስላ ከዛም ወደ ቶን እንቀይር
የ አስፉልቱ በ አንድ ሜትር ኪዩብ 2400 ኪሎግራም ይመዝናል/ተጠቅጥቋል ስለዚህ በ ኪሎግራም ለማግኘት ዴንሲቲ/density ሲባዛ በ ቮሊዩም እናረጋለን
ክብደት (በኪሎ) = ቮሊዩም x ዴንሲቲ/
density
ክብደት = 2400ኪሎግራም በ ሜትር
ኪዩብ x 225 ሜትር ኪዩብ
ክብደት = 540,000 ኪሎግራም
1 ቶን = 1000 ኪሎግራም
የ አስፋልታችን ክብደት = 540 ቶን
አንድ የ ክብደት መኪና የመጫን አቅሙ 40 ቶን ነው
የሚያስፈልገን የጭነት መኪና ብዛት= 540 ቶን / 40 ቶን = 13.5
14 ብለን እንውሰድ
@etconp
Facebook:- https://www.facebook.com/etconp/
- Volume of asphalt = L x W x T
- volume of asphalt = 150m x 10m x 0.15m
- volume of asphalt = 225m³
For full answer check it on the image
መልስ
በመጀመሪያ ለ አስፋልቱ ንጣፍ ምን ያህል አስፋልት
(በ ቮሊዩም) እንደሚያስፈልገን እናስላ
ቮሊዩም = ርዝመት x ስፋት x ጥልቀት (ውፍረት)
ቮሊዩም = 150 ሜትር x 10 ሜትር x 0.15 ሜትር (15ሳንቲም)
ቮሊዩም = 225 ሜትሪክ ኪዩብ
ለ አስፋልት ንጣፍ የሚያስፈልገን 225 ሜትሪክ ኪዩብ ነው
ነገር ግን የተነገረን የ መኪናው የመጫኛ አቅም ነው በ volumetric ሳይሆን በ gravimetric (በክብደት ነው) ነው ስለዚህ የሚያስፈልገንን የ አስፋልት መጠን በ ኪሎ ግራም እናስላ ከዛም ወደ ቶን እንቀይር
የ አስፉልቱ በ አንድ ሜትር ኪዩብ 2400 ኪሎግራም ይመዝናል/ተጠቅጥቋል ስለዚህ በ ኪሎግራም ለማግኘት ዴንሲቲ/density ሲባዛ በ ቮሊዩም እናረጋለን
ክብደት (በኪሎ) = ቮሊዩም x ዴንሲቲ/
density
ክብደት = 2400ኪሎግራም በ ሜትር
ኪዩብ x 225 ሜትር ኪዩብ
ክብደት = 540,000 ኪሎግራም
1 ቶን = 1000 ኪሎግራም
የ አስፋልታችን ክብደት = 540 ቶን
አንድ የ ክብደት መኪና የመጫን አቅሙ 40 ቶን ነው
የሚያስፈልገን የጭነት መኪና ብዛት= 540 ቶን / 40 ቶን = 13.5
14 ብለን እንውሰድ
@etconp
Facebook:- https://www.facebook.com/etconp/