❀Objective of prestressed Concrete
☞The main purpose of having prestressed concrete is to increase the load that the member can withstand. This is most common in long span beams found on bridges and railway viaducts, slab, and concrete piles. Prestressed concrete may be precast or cast in place.
@etconp
☞The main purpose of having prestressed concrete is to increase the load that the member can withstand. This is most common in long span beams found on bridges and railway viaducts, slab, and concrete piles. Prestressed concrete may be precast or cast in place.
@etconp
What is this
1️⃣. Rebar Chair
2️⃣. Stirrups
3️⃣. Bond
4️⃣. Anchorage
@etconp
Facebook:- https://www.facebook.com/etconp/
1️⃣. Rebar Chair
2️⃣. Stirrups
3️⃣. Bond
4️⃣. Anchorage
@etconp
Facebook:- https://www.facebook.com/etconp/
What kind of slab is this ?
1️⃣. Post tensioned slab
2️⃣. Waffle slab
3️⃣. Pre tensioned slab
4️⃣. Box slab
@etconp
Facebook:- https://www.facebook.com/etconp/
1️⃣. Post tensioned slab
2️⃣. Waffle slab
3️⃣. Pre tensioned slab
4️⃣. Box slab
@etconp
Facebook:- https://www.facebook.com/etconp/
Name the failure
1️⃣.Tension failure
2️⃣. Shear failure
3️⃣. Buckling failure
4️⃣.Bending failure
@etconp
Facebook:- https://www.facebook.com/etconp/
1️⃣.Tension failure
2️⃣. Shear failure
3️⃣. Buckling failure
4️⃣.Bending failure
@etconp
Facebook:- https://www.facebook.com/etconp/
👍1
Ethio Construction Engineering
The specific gravity of water is taken as ______.
Relative density, or specific gravity, is the ratio of the density of a substance to the density of a given reference material. Specific gravity for liquids is nearly always measured with respect to water at its densest; for gases, the reference is air at room temperature.
ከ ውሀ ጋር ሌሎችን ማቴሪያሎች ያላቸው ንፃሬ ነው ስለዚህ የ ውሀ የራሱ አንድ ነው
@etconp
Facebook:- https://www.facebook.com/etconp/
ከ ውሀ ጋር ሌሎችን ማቴሪያሎች ያላቸው ንፃሬ ነው ስለዚህ የ ውሀ የራሱ አንድ ነው
@etconp
Facebook:- https://www.facebook.com/etconp/
❤1
Suppose the length, breadth and thickness of asphalt layer are 150meters , 10meters and 15cm respectively
- Assume the asphalt is 2400kg/m³
- And one dumper carries 40 tones
@etconp
Facebook:- https://www.facebook.com/etconp/
- Assume the asphalt is 2400kg/m³
- And one dumper carries 40 tones
@etconp
Facebook:- https://www.facebook.com/etconp/
❤1
Ethio Construction Engineering
Suppose the length, breadth and thickness of asphalt layer are 150meters , 10meters and 15cm respectively - Assume the asphalt is 2400kg/m³ - And one dumper carries 40 tones @etconp Facebook:- https://www.facebook.com/etconp/
Answer
- Volume of asphalt = L x W x T
- volume of asphalt = 150m x 10m x 0.15m
- volume of asphalt = 225m³
For full answer check it on the image
መልስ
በመጀመሪያ ለ አስፋልቱ ንጣፍ ምን ያህል አስፋልት
(በ ቮሊዩም) እንደሚያስፈልገን እናስላ
ቮሊዩም = ርዝመት x ስፋት x ጥልቀት (ውፍረት)
ቮሊዩም = 150 ሜትር x 10 ሜትር x 0.15 ሜትር (15ሳንቲም)
ቮሊዩም = 225 ሜትሪክ ኪዩብ
ለ አስፋልት ንጣፍ የሚያስፈልገን 225 ሜትሪክ ኪዩብ ነው
ነገር ግን የተነገረን የ መኪናው የመጫኛ አቅም ነው በ volumetric ሳይሆን በ gravimetric (በክብደት ነው) ነው ስለዚህ የሚያስፈልገንን የ አስፋልት መጠን በ ኪሎ ግራም እናስላ ከዛም ወደ ቶን እንቀይር
የ አስፉልቱ በ አንድ ሜትር ኪዩብ 2400 ኪሎግራም ይመዝናል/ተጠቅጥቋል ስለዚህ በ ኪሎግራም ለማግኘት ዴንሲቲ/density ሲባዛ በ ቮሊዩም እናረጋለን
ክብደት (በኪሎ) = ቮሊዩም x ዴንሲቲ/
density
ክብደት = 2400ኪሎግራም በ ሜትር
ኪዩብ x 225 ሜትር ኪዩብ
ክብደት = 540,000 ኪሎግራም
1 ቶን = 1000 ኪሎግራም
የ አስፋልታችን ክብደት = 540 ቶን
አንድ የ ክብደት መኪና የመጫን አቅሙ 40 ቶን ነው
የሚያስፈልገን የጭነት መኪና ብዛት= 540 ቶን / 40 ቶን = 13.5
14 ብለን እንውሰድ
@etconp
Facebook:- https://www.facebook.com/etconp/
- Volume of asphalt = L x W x T
- volume of asphalt = 150m x 10m x 0.15m
- volume of asphalt = 225m³
For full answer check it on the image
መልስ
በመጀመሪያ ለ አስፋልቱ ንጣፍ ምን ያህል አስፋልት
(በ ቮሊዩም) እንደሚያስፈልገን እናስላ
ቮሊዩም = ርዝመት x ስፋት x ጥልቀት (ውፍረት)
ቮሊዩም = 150 ሜትር x 10 ሜትር x 0.15 ሜትር (15ሳንቲም)
ቮሊዩም = 225 ሜትሪክ ኪዩብ
ለ አስፋልት ንጣፍ የሚያስፈልገን 225 ሜትሪክ ኪዩብ ነው
ነገር ግን የተነገረን የ መኪናው የመጫኛ አቅም ነው በ volumetric ሳይሆን በ gravimetric (በክብደት ነው) ነው ስለዚህ የሚያስፈልገንን የ አስፋልት መጠን በ ኪሎ ግራም እናስላ ከዛም ወደ ቶን እንቀይር
የ አስፉልቱ በ አንድ ሜትር ኪዩብ 2400 ኪሎግራም ይመዝናል/ተጠቅጥቋል ስለዚህ በ ኪሎግራም ለማግኘት ዴንሲቲ/density ሲባዛ በ ቮሊዩም እናረጋለን
ክብደት (በኪሎ) = ቮሊዩም x ዴንሲቲ/
density
ክብደት = 2400ኪሎግራም በ ሜትር
ኪዩብ x 225 ሜትር ኪዩብ
ክብደት = 540,000 ኪሎግራም
1 ቶን = 1000 ኪሎግራም
የ አስፋልታችን ክብደት = 540 ቶን
አንድ የ ክብደት መኪና የመጫን አቅሙ 40 ቶን ነው
የሚያስፈልገን የጭነት መኪና ብዛት= 540 ቶን / 40 ቶን = 13.5
14 ብለን እንውሰድ
@etconp
Facebook:- https://www.facebook.com/etconp/
In order to secure superstructure from an earthquake ________ technique is most preferred and used worldwide
Anonymous Quiz
15%
Reinforcement
13%
Energy dissipation
19%
Base isolation
54%
Seismic dampers
_______ is the part of building constructed above the plinth level(grade beam).
Anonymous Quiz
84%
Superstructure
9%
Substructure
4%
Foundation
3%
Plinth
👍1👎1
__________ wall is constructed in order to support load other than its own.
Anonymous Quiz
23%
Load supporting
15%
Load distributing
58%
Load bearing
4%
Load releasing
👍1
In architecture _________ refers to such super-structural element that also has certain proportional and decorative features.
Anonymous Quiz
10%
Beam
26%
Column
40%
Lintels
24%
Sills
The ____________ is the term used to denote a method in which case is driven into the ground and the material inside the casing is washed out and brought to the surface for inspection.
Anonymous Quiz
17%
Deep boring
19%
Percussion boring
25%
Rotary drilling
39%
Wash boring
share your doubts related to civil engineering or if you are facing any sort of problems in during construction or before construction or if you have any doubts regarding analysis or design of any structure in this group
we will try to sort it out as soon as possible we have a team of experts
@etconp
@ETCONpDigitalLibrary_Bot
we will try to sort it out as soon as possible we have a team of experts
@etconp
@ETCONpDigitalLibrary_Bot
👍1
Ethio Construction Engineering
_______ is the part of building constructed above the plinth level(grade beam).
Explanation:
Superstructure is constructed of above the plinth (grade beam) level which consists of RCC /RC walls and columns, upper floors, sills, Lintels, etc. Whereas, substructure is a part of building constructed below the plinth level which consists of foundation plinth, etc.
@etconp
Facebook:- https://www.facebook.com/etconp/
Superstructure is constructed of above the plinth (grade beam) level which consists of RCC /RC walls and columns, upper floors, sills, Lintels, etc. Whereas, substructure is a part of building constructed below the plinth level which consists of foundation plinth, etc.
@etconp
Facebook:- https://www.facebook.com/etconp/
If the volume of liquid weighting 3000 kg is 4m³. What’s the specific gravity ?
Anonymous Quiz
6%
0.5
70%
0.75
14%
1
11%
1.5
What is your occupation?
Anonymous Poll
13%
Student
72%
Civil engineer /related
5%
Architect
6%
Contractor
4%
Other